33.060 - Radiocommunications
ICS 33.060 Details
Radiocommunications
Funktechnik. Radiotechnik
Radiocommunications
Radijske komunikacije
General Information
Frequently Asked Questions
ICS 33.060 is a classification code in the International Classification for Standards (ICS) system. It covers "Radiocommunications". The ICS is a hierarchical classification system used to organize international, regional, and national standards, facilitating the search and identification of standards across different fields.
There are 2123 standards classified under ICS 33.060 (Radiocommunications). These standards are published by international and regional standardization bodies including ISO, IEC, CEN, CENELEC, and ETSI.
The International Classification for Standards (ICS) is a hierarchical classification system maintained by ISO to organize standards and related documents. It uses a three-level structure with field (2 digits), group (3 digits), and sub-group (2 digits) codes. The ICS helps users find standards by subject area and enables statistical analysis of standards development activities.
e-Library Subscription
Create subscription and get permanent access to documents within 33.060 - Radiocommunications
Currently subscription includes documents marked with .We are working on making all documents available within the subscription.
The present document covers the assessment of the following maritime radio beacons in respect of ElectroMagnetic Compatibility (EMC):
• Emergency Position Indicating Radio Beacons (EPIRBs) operating in the COSPAS-SARSAT satellite system in the UHF band 406,0 MHz to 406,1 MHz and in the maritime VHF band on frequencies 161,975 MHz (AIS1) and 162,025 MHz (AIS2).
• Personal Locating Beacons (PLBs) operating in the COSPAS-SARSAT satellite system in the UHF band 406,0 MHz to 406,1 MHz.
• Maritime Survivor Locating Devices (MSLDs) operating in the maritime VHF band on frequencies 156,525 MHz (CH 70), 161,975 MHz (AIS1) and 162,025 MHz (AIS2).
• Mobile Aids to Navigation (AtoN) operating on 161,975 MHz (AIS1) and 162,025 MHz (AIS2).
• Search And Rescue Transmitters (SARTs) operating on 161,975 MHz (AIS1) and 162,025 MHz (AIS2).
Any of the above devices may also include homing transmitters operating on 121,5 MHz and/or 243 MHz. These devices may operate stand alone or together with ancillary equipment as a system. Technical specifications related to the antenna port and emissions from the enclosure port of radio beacons are not included in the present document. Such technical specifications are found in the related product standards for the effective use of the radio spectrum. The present document specifies the applicable test conditions, performance assessment, and performance criteria for radio beacons and the associated ancillary equipment. NOTE: The relationship between the present document and essential requirements of article 3.1b of Directive 2014/53/EU [i.2] is given in annex A.
- Standard21 pagesEnglish languagesale 15% off
- Standard21 pagesEnglish languagesale 15% off
- Standard21 pagesEnglish languagee-Library read for1 day
The present document contains the common requirements for marine radio communications and radio determination equipment and associated ancillary equipment operating from any combination of internal batteries, DC and single phase AC, in respect of ElectroMagnetic Compatibility (EMC). The provisions of the present document apply to marine radio equipment not covered in the scope of the Council Directive on marine equipment (the "Marine Equipment Directive" 2014/90/EU [i.4]). Product dependent arrangements necessary to perform the EMC tests on dedicated types of marine radio communications and radio determination equipment, and the assessment of test results, are detailed in the appropriate product related parts of the present document. The present document, together with the product related part, specifies the applicable EMC tests, the methods of measurement, the limits and the performance criteria for marine radio equipment and associated ancillary equipment. In case of differences (for instance concerning special conditions, definitions, abbreviation) between the present document and the relevant product related part of the present document, the product related part takes precedence. For the further content of the present document, the expression "radio equipment" is taken to mean marine radio communications or radio determination equipment, in each individual case. Technical specifications related to the antenna port of radio equipment and emissions from the enclosure port of radio equipment and combinations of radio and associated ancillary equipment are not included in the present document. Such technical specifications are normally found in the relevant product standards for the effective use of the radio spectrum. The environment classification used in the present document is maritime, as defined in EN IEC 60945 [i.3]. Marine radio communications equipment meeting the EMC requirements set out in EN IEC 61000-6-3 [i.1] and EN 61000-6-1 [i.2] is deemed to meet also the EMC requirements for the maritime environment described in EN IEC 60945 [i.3]. The EMC requirements have been selected to ensure an adequate level of compatibility for apparatus intended to be used in the maritime environment. The levels, however, do not cover extreme cases which may occur in any location but with low probability of occurrence.
- Standard32 pagesEnglish languagesale 15% off
- Standard32 pagesEnglish languagesale 15% off
- Standard32 pagesEnglish languagee-Library read for1 day
The present document specifies technical characteristics and methods of measurements applicable to radio equipment used in MultiPoint (MP) Digital Fixed Radio Systems (DFRS) designed for use in the following sub-ranges (see note 2):
• 30 MHz to 1 GHz.
• 1 GHz to 3 GHz.
• 3 GHz to 11 GHz.
• 24,25 GHz to 29,5 GHz.
• 31,0 GHz to 33,4 GHz.
• 40,5 GHz to 43,5 GHz.
NOTE 1: The relationship between the present document and essential requirements of article 3.2 of Directive 2014/53/EU [i.1] is given in Annex A.
NOTE 2: For more information on the applicable frequency bands, refer to Annex F.
The present document is applicable to multipoint radio system equipment using any arbitrary access method. It applies to all equipment composing the MP systems, i.e. to Central Station (CS), Terminal Station (TS) and Repeater Station (RS). Time Division Duplex (TDD) or Frequency Division Duplex (FDD or H-FDD) can be used on an equivalent basis. Equipment are classified according to one set of Equipment Classification (EqC) (summarized in clause C.4). The EqC set of the equipment under assessment is indicated in the technical documentation (see note 3). Equipment not fitting any of the set of EqC provided by Annex C are not in the scope of the present document.
NOTE 3: See definition in clause 3.2.
Equipment providing undetachable antennas or providing active antennas (eventually requiring radiated test procedures) are not in the scope of the present document (see note 4).
NOTE 4: Rationale is that even if antenna characteristics are not relevant for access to radio spectrum of MP fixed radio systems (see technical description in ETSI TR 101 506 [i.6]), the essential equipment parameters are defined at antenna port and their radiated test procedures are not available. For information, the most common types of antennas are standardized in Part 3 of this multi-part
deliverable [i.2]. Systems referring to an EqC with "H" code (see clause C.2.2) as Primary Equipment Classification (PET), implementing an actual FH-CDMA access method with frequency hopping period exceeding 400 ms, are not considered within the scope of the present document. Applications intended for offering in the bands 3,4 GHz to 3,8 GHz the option of Nomadic Wireless Access (NWA), according to the NWA definition in Recommendation ITU-R F.1399 [i.14], are not considered in the scope of the present document.
- Standard89 pagesEnglish languagesale 15% off
- Standard89 pagesEnglish languagesale 15% off
- Standard89 pagesEnglish languagee-Library read for1 day
The present document specifies technical requirements, limits and test methods for transceivers and transmitters utilizing Ultra WideBand (UWB) technologies for location tracking for enhanced indoor devices within 6,0 GHz to 8,5 GHz.
NOTE: The relationship between the present document and essential requirements of article 3.2 of Directive 2014/53/EU is given in Annex A.
- Standard31 pagesEnglish languagesale 15% off
- Standard31 pagesEnglish languagesale 15% off
- Standard31 pagesEnglish languagee-Library read for1 day
The present document specifies technical requirements, limits and test methods for Millimeter Wave Security Scanners (mmWave SSC, SSC equipment) operating indoor in the band 69,8 GHz to 80,5 GHz. The operating frequency range is split into two bands 97 from 69,8 GHz to 79,9 GHz and 99 from 76,5 GHz to 80,5 GHz as defined in Decision (EU) 2025/105 [i.8]. Details on mmWave SSC equipment and the related categorization is further specified in clause 4.2. NOTE: The relationship between the present document and essential requirements of article 3.2 of Directive 2014/53/EU [i.1] is given in annex A.
- Standard29 pagesEnglish languagesale 15% off
- Standard29 pagesEnglish languagesale 15% off
- Standard29 pagesEnglish languagee-Library read for1 day
This International Standard specifies the minimum operational and performance requirements, methods of testing and required test results conforming to performance standards not inferior to those adopted by the IMO in Resolution MSC.192(79). (MSC.192/2) The radar installation, in addition to meeting the general requirements as set out in resolution A.694(17) and the related standard IEC 60945, should comply with the performance standards of MSC.192(79). When a requirement of this standard is different from IEC 60945, the requirement in this standard takes precedence.
- Corrigendum1 pageEnglish languagee-Library read for1 day
IEC TR 63675-1:2026 is a Technical Report. Millimetre wave and terahertz wave radio communication services require low phase noise oscillators in order to comply with radio regulations and reduce the computing resources required for demodulation processes. This document provides the principle and application of the optoelectronic oscillation technologies using the photonics technique as a guideline for the design of the radiocommunication transceivers.
- Technical report15 pagesEnglish languagesale 15% off
The present document specifies technical characteristics and methods of measurements for the following equipment used in ground-based ATC Surveillance for civil air navigation:
• Wide Area Multilateration (WAM) systems with Mode S capabilities which may include Mode A/C, transmitting at 1 030 MHz and at 1 090 MHz, and receiving at 1 090 MHz, used for air traffic control with or without 1 090 MHz phase overlay.
Antennas for this equipment are passive.
Remote Field Monitors (RFM) as described in ETSI EN 303 363-2 [i.6] as well as Vehicle transmitters as described in ETSI EN 303 213-5-2 [i.7] are not covered in the present document.
NOTE: The relationship between the present document and essential requirements of article 3.2 of Directive 2014/53/EU [i.1] is given in Annex A.
- Standard50 pagesEnglish languagesale 15% off
- Standard50 pagesEnglish languagesale 15% off
- Standard50 pagesEnglish languagesale 15% off
- Standard50 pagesEnglish languagee-Library read for1 day
The present document specifies technical requirements, limits and test methods for UWB devices installed in motor and railway vehicles in the frequency range 6,0 GHz to 8,5 GHz, used for UWB radiodetermination applications. The present document covers only monostatic radar equipment. Further details of the covered UWB radiodetermination equipment installed in motor and railway vehicles and the related EUT categories can be found in clause 4.2 of the present document.
NOTE: The relationship between the present document and essential requirements of article 3.2 of Directive 2014/53/EU [i.1] is given in annex A.
- Standard35 pagesEnglish languagesale 15% off
- Standard35 pagesEnglish languagesale 15% off
- Standard36 pagesEnglish languagesale 15% off
- Standard36 pagesEnglish languagee-Library read for1 day
- Standard36 pagesEnglish languagee-Library read for1 day
IEC 62065:2025 specifies the minimum operational and performance requirements, test methods and required test results conforming to performance standards adopted by the IMO in resolution MSC.74(69) Annex 2 Recommendation on Performance Standards for Track Control Systems. In addition, it takes into account IMO resolution A.694(17) to which IEC 60945 is associated. It also takes into account IMO resolution MSC.302(87) on bridge alert management (BAM), to which IEC 62923-1 and IEC 62923-2 are associated.
This third edition cancels and replaces the second edition published in 2014. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) alert management has been brought in line with MSC.302(87), IEC 62923-1 and IEC 62923‑2, reducing the number of alerts for one situation and improving the information provided by alerts. An overview is provided in Annex F;
b) the previous Annex F has been removed as it was outdated and not instrumental in this document;
c) the requirements in Clause 5 have been further detailed:
d) the structure of Clause 6 has been updated.
- Standard113 pagesEnglish languagee-Library read for1 day
The present document defines the functional model including reference points as well as the protocol and procedure for interworking between GSM-R R4 and FRMCS and covers the following services:
• Group call.
• Emergency group call.
• Point-to-point call.
• Text messaging Service.
- Standard64 pagesEnglish languagesale 15% off
- Standard64 pagesEnglish languagesale 15% off
- Technical specification64 pagesEnglish languagee-Library read for1 day
The present document specifies non-3GPP network functions and interfaces applicable to the FRMCS Trackside Infrastructure. The present document describes the trackside network architecture and proceeds with specifying the non-3GPP trackside network functional entities (such as the FRMCS Trackside Gateway), including functions, interfaces and procedures they need to comply to. The present document does not consider message sequences within and between 3GPP and non-3GPP building blocks. These message sequences will be defined by related 3GPP specifications, ETSI FRMCS transport stratum definition and FRMCS service stratum definition documents or UIC FRMCS FIS [i.3] and UIC FRMCS FFFIS [1].
- Standard22 pagesEnglish languagesale 15% off
- Standard22 pagesEnglish languagesale 15% off
- Technical specification22 pagesEnglish languagee-Library read for1 day
The present document addresses the specific RF technical characteristics and methods of measurements required by ECC Decision (20)02 [i.1] for base stations, cab radio user equipment and terminals other than cab radio intended to be used for the Future Railway Mobile Communications System (FRMCS) and operating in bands as listed in Table 1-1. The technical characteristics and methods of measurements have been derived from, and are consistent with ECC Decision (20)02 [i.1], Commission Implementing Decision (EU) 2021/1730 [i.2], ETSI TS 138 101-1 [1], ETSI TS 138 104 [2], ETSI TS 138 141-1 [3], ETSI TS 138 508-1 [4] and ETSI TS 138 521-1 [5]. For the clauses not specifically mentioned in the present document, compliance with the above mentioned 3GPP Technical Specifications (TS) is also required for BS and UE. Only BS type 1-C characteristics in the previously mentioned specifications apply for the base station specifications given in the present document.
- Standard20 pagesEnglish languagesale 15% off
- Standard20 pagesEnglish languagesale 15% off
- Technical specification20 pagesEnglish languagee-Library read for1 day
The present document specifies technical characteristics and methods of measurement in respect of ElectroMagnetic Compatibility (EMC) for the following equipment:
• Secondary Surveillance Radar (SSR) interrogator;
• SSR Far Field Monitor (FFM);
• Multilateration (MLAT);
• Wide Area Multilateration (WAM);
• Distance Measurement Equipment (DME) land station transponder;
• Extended Squitter (ES) / Non Transponder (NT).
operating in the frequency range 960 MHz to 1 215 MHz. The above mentioned radio equipment can be intended for use at a fixed location or mobile use. The standard covers equipment consisting of one or more enclosures that contain at least one of the following functionalities: transmitter, receiver, signal processing. Other parts which are not part of the navigation functionality e.g. local UPS, air conditioning equipment, dehumidifying equipment, communication network equipment, etc., are not in the scope of the present document, unless these parts are implemented inside the system enclosure(s). NOTE 1: The relationship between the present document and essential requirements of article 3.1(b) of Directive 2014/53/EU [i.1] is given in annex A. Technical specifications related to conducted emission EMC requirements below 9 kHz on the AC mains port of radio equipment are not included in the present document. NOTE 2: Such technical specifications are normally found in the relevant product family standards for AC mains powered equipment (e.g. EN 61000-3-2 [i.3] and EN 61000-3-3 [i.4]).
- Standard18 pagesEnglish languagesale 15% off
- Standard18 pagesEnglish languagesale 15% off
- Standard18 pagesEnglish languagee-Library read for1 day
The present document concerns the assessment of Citizens' Band (CB) radio equipment intended for the transmission of speech and associated support equipment with regard to ElectroMagnetic Compatibility (EMC). Requirements relating to the antenna port and emissions from the housing port of CB radio equipment are not included in the present document. Such requirements can be found in the relevant product standards for the effective use of the radio spectrum, see Table 1.
NOTE: The relationship between the present document and the essential requirements of article 3.1(b) of Directive 2014/53/EU [i.4] is given in annex A.
- Standard24 pagesEnglish languagesale 15% off
- Standard24 pagesEnglish languagesale 15% off
- Standard24 pagesEnglish languagee-Library read for1 day
The present document specifies technical requirements, limits, and test methods for radiodetermination equipment for location tracking applications operating in the frequency range 2,4 GHz to 2,4835 GHz.
Further details of the covered equipment can be found in clause 4.2 of the present document.
NOTE: The relationship between the present document and essential requirements of article 3.2 of Directive 2014/53/EU [i.3] is given in annex A.
- Standard26 pagesEnglish languagesale 15% off
- Standard26 pagesEnglish languagesale 15% off
- Standard26 pagesEnglish languagee-Library read for1 day
The present document specifies technical characteristics and methods of measurements in respect of ElectroMagnetic Compatibility (EMC) for the following equipment types:
1) digital cellular base station equipment, including BS with antenna ports and BS without antenna ports;
2) repeaters;
3) associated ancillary equipment.
Including individual and combinations of technologies listed in table 1.
Technical specifications related to conducted emission EMC requirements below 9 kHz on the AC mains port of radio equipment are not included in the present document.
NOTE 1: Such technical specifications are normally found in the relevant product family standards for AC mains powered equipment (e.g. EN 61000-3-2 [i.16] and EN 61000-3-3 [i.17]). Technical specifications related to the antenna port and emissions from the enclosure port of Base Station (BS), combinations of radio and associated ancillary equipment or repeaters are not included in the present document. Such technical specifications are found in the relevant product standards for the effective use of the radio spectrum. The environmental classification and the emission and immunity requirements used in the present document are as stated in ETSI EN 301 489-1 [1], except for any special conditions included in the present document.
NOTE 2: The relationship between the present document and essential requirements of article 3.1(b) of Directive 2014/53/EU [i.1] is given in Annex A.
- Standard41 pagesEnglish languagesale 15% off
- Standard41 pagesEnglish languagesale 15% off
- Standard41 pagesEnglish languagee-Library read for1 day
The present document specifies technical characteristics and methods of measurements for Point-to-point (P-P) Digital Fixed Radio Systems (DFRS) operating in frequency bands allocated to Fixed Service (FS) from 1 GHz to 174,8 GHz, corresponding to the appropriate frequency bands from 1,4 GHz to 174,8 GHz as described in relevant annexes B through L. Systems in the scope of the present document are generally intended to operate in full Frequency Division Duplex (FDD) and cover also unidirectional links applications. Time Division Duplex (TDD) applications, when possibly applicable in a specific band, are explicitly mentioned as appropriate in the relevant annexes B through L. Other possible prescriptions, limitations and requirements, for operation in specific bands are also explicitly mentioned, as appropriate, in the relevant annexes B through L. Systems in the scope of the present document are intended to operate only in combination with directive fixed gain antennas respecting the technical requirements in ETSI EN 302 217-4 [6]. Systems in the scope of the present document may be composed by equipment without antennas (see informative annex Q for background) or equipment including integral (but physically detachable) or dedicated antenna. Systems including integral antennas physically undetachable from the radio equipment are not in the scope of the present document (see note 1).
NOTE 1: For additional information, the rationale is that the present document as well as ETSI EN 301 126-1 [1] (radio equipment parameters testing) do not provide radiated test methods and ETSI EN 301 126-3-1 [2] (antenna parameters testing) does not provide test methods for undetachable antennas; future revisions could fill this vacancy.
NOTE 2: The relationship between the present document and the essential requirements of article 3.2 of Directive 2014/53/EU [i.1] is given in annex A.
- Standard173 pagesEnglish languagesale 15% off
- Standard173 pagesEnglish languagesale 15% off
- Standard173 pagesEnglish languagee-Library read for1 day
The present document defines the characteristics and requirements of antennas for point-to-point radio equipment operating in the frequency range from 1 GHz to 174,8 GHz falling within the scope (see note) of ETSI EN 302 217-2 [i.2].
For technical commonalities that range is here divided into sub-ranges as follows:
Range 0: 1 GHz to 3 GHz;
Range 1: 3 GHz to 14 GHz;
Range 2: 14 GHz to 20 GHz;
Range 3: 20 GHz to 24 GHz;
Range 4: 24 GHz to 30 GHz;
Range 5: 30 GHz to 47 GHz;
Range 6: 47 GHz to 71 GHz;
Range 7: 71 GHz to 86 GHz;
Range 8: 92 GHz to 114,25 GHz;
Range 9: 130 GHz to 174,8 GHz.
The present document is applicable to fixed radio equipment with integral (see note) or dedicated antennas.
NOTE: For information, ETSI EN 302 217-2 [i.2] includes in its scope only the use of detachable integral antennas; undetachable integral antennas are not considered due to the present lack of radiated test procedures for the radio equipment parameters.
The present document also applies to stand-alone antennas, placed separately on the market. In this case the present document is to be used by radio equipment manufacturers to provide guidance as to the information for the user, as required by article 10 paragraph 8 of Directive 2014/53/EU [i.1], regarding the antenna characteristics required so as the radio equipment, supplied without antenna, can operate as intended in its technical documentation. The present document is applicable to fixed beam antennas, as well as to "self-alignment tracking" antenna, with limited tracking range, so that all requirements in the present document are respected throughout the tracking angle indicated in the technical documentation. The main body of the present document specifies the characteristics that define the various antenna classes, whilst the annexes provide additional information that is useful to both antenna manufacturers and user/installers.
- Standard46 pagesEnglish languagesale 15% off
- Standard46 pagesEnglish languagesale 15% off
- Standard46 pagesEnglish languagee-Library read for1 day
The present document details standardized procedures for conformance test of radio interface parameters for Point to Point (PP) equipment used for Digital Fixed Radio Systems (DFRS). Three sets of procedures (for ER, OR and CP) are considered in the scope of the present document:
• Procedures for radio parameters relevant to Essential Requirements (ER) and Optional Requirements (OR), relevant to article 3.2 of Directive 2014/53/EU [i.1]. Requirements for these parameters are detailed in ETSI EN 302 217-2 [9].
• Procedures for Complementary Requirements (CP) that, even if not considered "essential" in the light of article 3.2 of Directive 2014/53/EU [i.1], are considered important for the operations of PP equipment. These parameters are detailed in clause 8 of ETSI EN 302 217-1 [8].
The present document is mainly intended to be applied in conjunction with the above equipment relevant standards and will enable commonality of test results, irrespective of the body carrying out the test. However, the present document can be used also in conjunction with other DFRS relevant standards that would refer to the parameters and test methods hereby described. The conformance tests described in the present document are those related to radio specific parameters required directly by the radio equipment relevant standards at antenna ports in conducted test methods. Conformance tests to other boundary standards (e.g. those for system input/output interfaces (i.e. set at X/X' interface, shown in figure 2, and related baseband process) are outside the scope of the present document. Also, tests described in the present document are not applicable to radio equipment with integral antenna of undetachable antenna type requiring radiated test methods.
- Standard58 pagesEnglish languagesale 15% off
- Standard58 pagesEnglish languagesale 15% off
- Standard58 pagesEnglish languagee-Library read for1 day
The present document specifies the technical requirements, limits and test methods for material sensing devices using UWB technology exterior material sensing devices for ground based vehicles below 10,6 GHz. The present document only covers non-contact based UWB material sensing devices with antenna connectors according to ECC/DEC(07)01 [i.1] and Commission Implementing Decision (EU) 2024/1467 [i.2]. Further details of the covered EUT for external material sensing applications for ground-based vehicles and the related categories can be found in clause 4.2 of the present document.
NOTE: The relationship between the present document and essential requirements of article 3.2 of Directive 2014/53/EU [i.3] is given in annex A.
- Standard49 pagesEnglish languagesale 15% off
- Standard49 pagesEnglish languagesale 15% off
- Standard49 pagesEnglish languagee-Library read for1 day
The present document specifies technical requirements, limits and test methods for Tank Level Probing Radar (TLPR) equipment operating in the frequency ranges 4,5 GHz to 7 GHz, 8,5 GHz to 10,6 GHz, 24,05 GHz to 27 GHz, 57 GHz to 64 GHz and 75 GHz to 85 GHz. Tank Level Probing Radar equipment in the scope of the present document consist of a combined transmitter and receiver and are equipped with an integral or dedicated antenna provided and specified by the equipment manufacturer. Further details of the covered TLPR equipment can be found in clause 4.2 of the present document. Technical and regulatory requirements for TLPR are provided in European Commission Implementing Decision (EU) 2025/105 [i.5].
NOTE: The relationship between the present document and essential requirements of article 3.2 of Directive 2014/53/EU [i.1] is given in Annex A.
- Standard45 pagesEnglish languagesale 15% off
- Standard46 pagesEnglish languagesale 15% off
- Standard46 pagesEnglish languagee-Library read for1 day
The present document applies to Digital Fixed Radio Systems (DFRS) in point-to-point operation with integral and external antennas in the frequency range of 1 GHz to 86 GHz corresponding to the appropriate frequency bands 1,4 GHz to 86 GHz as described in ETSI EN 302 217-2 [16], annex B to annex L. The present document summarizes:
• all characteristics, principles and, of utmost importance, terms and definitions that are common to all P-P equipment and antennas and its consultation is necessary when using all other parts of ETSI EN 302 217 series;
• all system-dependent requirements for Point-to-Point (P-P) equipment. These requirements are introduced in two different clauses sub-sets:
- Main requirements are requirements that are also related to the "essential requirements" under article 3.2 of Directive 2014/53/EU [i.1] and further detailed in the Harmonised Standard ETSI EN 302 217-2 [16].
- Complementary requirements are requirements that are not related to essential requirements under article 3.2 of Directive 2014/53/EU [i.1]. Nevertheless they have been commonly agreed for proper system operation and deployment when specific deployment conditions or compatibility requirements are present. Compliance to all or some of these requirements is left to manufacturer decision.
Health and safety requirements and EMC conditions and requirements (articles 3.1a and 3.1b of Directive 2014/53/EU [i.1]), as well as other special conditions and requirements (articles 3.3(a) to 3.3(i) of Directive 2014/53/EU [i.1]) are not considered in the ETSI EN 302 217 series.
- Standard79 pagesEnglish languagesale 15% off
- Standard80 pagesEnglish languagesale 15% off
- Standard80 pagesEnglish languagee-Library read for1 day
The present document specifies technical characteristics, limits and methods of measurements for Ultra Short Range Communication (USRC) equipment operating in the 57 GHz to 64 GHz frequency range. Further details for the covered Ultra Short Range Communication (USRC) equipment can be found in clause 4.2 of the present document.
NOTE: The relationship between the present document and essential requirement of article 3.2 of Directive 2014/53/EU [i.4] is given in Annex A.
- Standard35 pagesEnglish languagesale 15% off
- Standard35 pagesEnglish languagesale 15% off
- Standard35 pagesEnglish languagee-Library read for1 day
The present document specifies technical characteristics and methods of measurements for ground based monostatic
ATC solid state primary surveillance radars that are intended to work with a waveguide-based rotating passive antenna
and have the following characteristics:
• operation in the 1 215 MHz to 1 400 MHz frequency range;
• transmitter output peak power up to 100 kW;
• the transceiver output uses an RF circulator;
• a piece of waveguide of at least 66 cm is integral to the transceiver.
NOTE 1: Phased array ATC primary surveillance radars are not covered by the present document.
NOTE 2: 66 cm equals 2 times the cut-off wavelength of a WR650/WG6/R14 waveguide which is typically used in
the 1 215 MHz to 1 400 MHz frequency range.
NOTE 3: The relationship between the present document and essential requirements of article 3.2 of
Directive 2014/53/EU [i.1] is given in Annex A.
- Standard45 pagesEnglish languagesale 15% off
- Standard45 pagesEnglish languagesale 15% off
- Standard45 pagesEnglish languagee-Library read for1 day
IEC 61097-9:2025 specifies the minimum operational and performance requirements and test methods with required test results for transmitters and receivers capable of voice communication and digital selective calling for the GMDSS operating in either the medium frequency band only or in medium and high frequency bands allocated in the ITU Radio Regulations to the Maritime Mobile Service, as required by Chapter IV of SOLAS 1974 as amended. It is based on IMO resolution MSC.512(105) and takes account of Recommendation ITU-R M.493 for digital selective calling including the automatic connection system.
This second edition cancels and replaces the first edition published in 1997. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) the text has been updated to incorporate the provisions of the new IMO performance standards given in Resolution MSC.512(105) and new ITU-R recommendations given in M.493-16. These provisions in particular add new requirements for reception of maritime safety information and for the automatic connection system;
b) the provisions for digital selective calling which were previously in IEC 61097-3 have been incorporated;
c) the provisions for watch keeping receivers which were previously in IEC 61097-8 have been incorporated;
d) new requirements have been added for software maintenance in 4.10 in support of IMO recommendations;
e) new Annex A, Annex B and Annex C have been added for digital selective calling;
f) new Annex D and Annex G have been added for bridge alert management;
g) new Annex E and Annex I have been added for maritime safety information;
h) a new Annex F has been added for the automatic connection system;
i) a new Annex H has been added for equipment manuals;
j) a new Annex J has been added for remote control operation;
k) previous Annex A, Annex B and Annex C have been deleted as they are no longer relevant.
- Standard218 pagesEnglish languagesale 15% off
IEC 61097-7:2025 specifies the minimum performance requirements, technical characteristics and test methods with required test results for VHF radio installations capable of voice communication and digital selective calling as required by chapter IV of the International Convention for Safety of Life at Sea (SOLAS).
This document incorporates the applicable part of the performance standards included in IMO Resolution A.524(13) and MSC.511(105), the technical characteristics included in Recommendation ITU-R M.489-2 and Recommendation ITU-R M.493-16, and takes account of IMO Resolution A.694(17) which is associated with IEC 60945, and conforms with the ITU Radio Regulations where applicable.
When a requirement in this document is different from IEC 60945, the requirement in this document shall take precedence.
This edition includes the following significant technical changes with respect to the previous edition:
a) the text has been updated to incorporate the provisions of the new IMO performance standards given in Resolution MSC.511(105) and new ITU-R recommendations given in M.493-16;
b) the provisions for digital selective calling which were previously in IEC 61097-3 have been incorporated;
c) the provisions for watch keeping receivers which were previously in IEC 61097-8 have been incorporated;
d) new requirements have been added for a received signal strength indicator in 4.3.4 and for software maintenance in 4.6 in support of IMO recommendations;
e) new Annex B and Annex E have been added for bridge alert management;
f) new Annex C and Annex D have been added for digital selective calling;
g) a new Annex F has been added for remote control operation;
h) a new Annex G has been added for equipment manuals.
- Standard147 pagesEnglish languagesale 15% off
The present document specifies technical requirements, limits and test methods for Level Probing Radar (LPR)
equipment operating in the frequency ranges 6 GHz to 8,5 GHz, 24,05 GHz to 26,5 GHz, 57 GHz to 64 GHz, 75 GHz to
85 GHz for strictly vertical downward installation in outdoor as well as indoor environments.
Level Probing Radars in the scope of the present document consist of a combined transmitter and receiver and are
equipped with an integral or dedicated antenna provided also by the EUT manufacturer. EUTs intended to be equipped
with antennas from third-party manufacturers are not covered by the scope of the present document.
LPR equipment and the related categorization is further specified in clause 4.2.
NOTE: The relationship between the present document and essential requirements of article 3.2 of Directive
2014/53/EU [i.1] is given in Annex A.
- Standard51 pagesEnglish languagesale 15% off
- Standard51 pagesEnglish languagesale 15% off
- Standard51 pagesEnglish languagesale 15% off
- Standard51 pagesEnglish languagee-Library read for1 day
The present document specifies technical requirements, limits and test methods for SRD radiodetermination equipment
using Ultra Wide Band (UWB) technology in the frequency ranges from 116 GHz to 148,5 GHz, from 167 GHz to
182 GHz, and from 231,5 GHz to 250 GHz for Level Probing Radar (LPR) and Tank Level Probing Radar (TLPR).
Level Probing Radars and Tank Level Probing Radars consist of a combined transmitter and receiver and are equipped
with an integral or dedicated antenna provided also by the EUT manufacturer. EUTs intended to be equipped with
antennas from third-party manufacturers are not covered by the scope of the present document.
Furthermore, the present document is limited to LPR and TLPR devices with FMCW modulation (see clause C.2.2 of
ETSI EN 303 883-1 [1]).
Further details of the covered LPR and TLPR EUT can be found in clause 4.2 of the present document.
NOTE 1: The relationship between the present document and essential requirements of article 3.2 of
Directive 2014/53/EU [i.1] is given in annex A.
NOTE 2: Equipment covered by the present document operates in accordance with clause 2.3 and clause 2.5 of
ECC Decision(22)03 [i.3] and the upcoming EC framework for UWB/SRDs for the range 116 GHz to
260 GHz, which is based on the results of ECC Report 334 [i.8]
- Standard49 pagesEnglish languagesale 15% off
- Standard49 pagesEnglish languagesale 15% off
- Standard49 pagesEnglish languagesale 15% off
- Standard49 pagesEnglish languagee-Library read for1 day
REN/MSG-TFES-1138
- Standard65 pagesEnglish languagesale 15% off
- Standard65 pagesEnglish languagesale 15% off
- Standard65 pagesEnglish languagee-Library read for1 day
DEN/ERM-TG34-269
- Standard68 pagesEnglish languagesale 15% off
- Standard68 pagesEnglish languagesale 15% off
- Standard68 pagesEnglish languagee-Library read for1 day
The present document specifies technical requirements, limits and test methods for Short Range Devices in the non-
specific category operating in the frequency range 25 MHz to 1 000 MHz.
The non specific SRD category is defined by the EU Commission Decision 2019/1345/EU [i.3] as:
"The non-specific short-range device category covers all kinds of radio devices, regardless of the application or the
purpose, which fulfil the technical conditions as specified for a given frequency band. Typical uses include telemetry,
telecommand, alarms, data transmissions in general and other applications".
These radio equipment types are capable of transmitting up to 500 mW effective radiated power and operating indoor or
outdoor.
NOTE: The relationship between the present document and the essential requirements of article 3.2 of
Directive 2014/53/EU [i.2] is given in Annex A
- Standard107 pagesEnglish languagesale 15% off
- Standard107 pagesEnglish languagesale 15% off
- Standard107 pagesEnglish languagee-Library read for1 day
The present document specifies technical characteristics, limits and methods of measurements for Material Sensing
devices for Building Material Analysis (BMA) below 10,6 GHz.
Additional details of the covered Building Material Analysis (BMA) devices can be found in clause 4.2 of the present
document.
NOTE: The relationship between the present document and essential requirements of article 3.2 of
Directive 2014/53/EU [i.6] is given in annex A.
- Standard54 pagesEnglish languagesale 15% off
- Standard60 pagesEnglish languagesale 15% off
- Standard62 pagesEnglish languagesale 15% off
- Standard63 pagesEnglish languagesale 15% off
- Standard63 pagesEnglish languagee-Library read for1 day
The present document specifies technical characteristics and methods of measurements for the types of equipment:
1) Base Station for Evolved Universal Terrestrial Radio Access (E-UTRA).
2) Base Station for Evolved Universal Terrestrial Radio Access (E-UTRA) with NB-IoT.
3) Base Station for NB-IoT standalone.
NOTE: UTRA TDD is not included in Release 17 of ETSI EN 301 908.
This radio equipment type is capable of operating in all or any part of the operating bands given in table 1-1. Unless
stated otherwise, requirements specified for the TDD duplex mode apply for downlink and uplink operations in Frame
Structure Type 2. NB-IoT is designed to operate in the E-UTRA operating bands 1, 3, 8, 20, 28, 31, 41, 42, 43, 65, 72,
87, 88 which are defined in table 1-1.
- Standard141 pagesEnglish languagesale 15% off
- Standard141 pagesEnglish languagesale 15% off
- Standard141 pagesEnglish languagee-Library read for1 day
The present document specifies technical requirements, limits and test methods for equipment employing UWB for
vehicular access devices installed in motor and railway vehicles in the frequency ranges 3,8 GHz to 4,2 GHz and
6,0 GHz to 8,5 GHz.
These equipment types are intended to be utilized for vehicle access, vehicle immobilization and extended vehicle
access control functionalities (like closing windows or remotely starting the car).
Further details of the covered EUT can be found in clause 4.2.
NOTE: The relationship between the present document and essential requirements of article 3.2 of
Directive 2014/53/EU [i.1] is given in annex A.
- Standard39 pagesEnglish languagesale 15% off
- Standard45 pagesEnglish languagesale 15% off
- Standard45 pagesEnglish languagesale 15% off
- Standard45 pagesEnglish languagesale 15% off
- Standard45 pagesEnglish languagee-Library read for1 day
The present document specifies technical characteristics and methods of measurements for Short Range Devices (SRD)
in data networks; radio equipment to be used in the frequency bands 865 MHz to 868 MHz and 915,0 MHz to
919,4 MHz.
The present document covers types of devices NAP, master NAP, NN and TN operating indoor and outdoor. These
types are specified in clause 4.2.2 together with related permitted e.r.p.
NOTE 1: The availability of the frequency bands in European Union and CEPT countries can be obtained from the
EFIS (https://efis.cept.org/) and is also listed in Appendices 1 and 3 of ERC/REC 70-03 [i.4].
NOTE 2: It should be noted that, in some countries, part or all of the band 915,0 MHz to 919,4 MHz may be
unavailable, for networked and/or network based short range devices. See National Radio Interfaces
(NRI) as relevant for additional guidance.
NOTE 3: For 25 mW equipment, 917,4 MHz to 919,4 MHz is the core harmonised band according to EC
DEC 2022/172 [i.5].
NOTE 4: The relationship between the present document and essential requirements of article 3.2 of Directive
2014/53/EU [i.2] is given in Annex A.
- Standard100 pagesEnglish languagesale 15% off
- Standard100 pagesEnglish languagesale 15% off
- Standard100 pagesEnglish languagee-Library read for1 day
The present document specifies technical characteristics and methods of measurements for the following equipment:
• Multi-Standard Radio capable Base stations (NR, E-UTRA, UTRA, GSM/EDGE, NB-IoT).
NOTE: UTRA TDD is not included in Release 17 of ETSI EN 301 908.
These radio equipment types are capable of operating in all or any part of the frequency bands given in table 1-1.
NOTE 1: For BS capable of multi-band operation, the supported operating bands may belong to different Band
Categories.
The present document covers requirements for multi-RAT capable NR, E-UTRA, UTRA and GSM/EDGE MSR Base
Stations for 3GPP™ Release 9, 10, 11, 12, 13, 14, 15, 16 and 17. This includes the requirements for MSR operating
bands from 3GPP Release 18.
The RF requirements in the present document do not apply for multi-band operation supporting bands for both FDD and
TDD.
NOTE 2: The relationship between the present document and essential requirements of article 3.2 of
2014/53/EU [i.1] is given in annex A.
- Standard93 pagesEnglish languagesale 15% off
- Standard93 pagesEnglish languagesale 15% off
- Standard93 pagesEnglish languagee-Library read for1 day
The present document contains guidance for drafting a system reference document which is intended to be used initially
for internal coordination within ETSI and subsequently, in particular, for co-operation with the Electronic
Communications Committee (ECC) of the European Conference of Post and Telecommunications Administrations
(CEPT), under the Memorandum of Understanding between ECC and ETSI.
The present document is applicable to all ETSI Technical Bodies producing deliverables related to radio frequencies.
- Standard16 pagesEnglish languagesale 15% off
- Standard16 pagesEnglish languagesale 15% off
- Guide16 pagesEnglish languagee-Library read for1 day
The present document specifies technical characteristics and methods of measurements for Earth Stations on Mobile
Platforms (ESOMP) equipment with the following characteristics:
• The ESOMP is designed for both mobile and stationary operation.
• The ESOMP operates on various mobile platforms such as trains, maritime vessels, aircraft and other vehicles.
• The ESOMP is controlled and monitored by a Network Control Facility (NCF). This function may be
performed centrally (e.g. for a network of ESOMPs with a central hub) or it could be performed within the
ESOMP for autonomous control. The NCF is outside the scope of the present document.
• The ESOMP transmit and receive frequencies are shown in table 1.
NOTE: The relationship between the present document and essential requirements of article 3.2 of
Directive 2014/53/EU [i.11] is given in annex A.
- Standard79 pagesEnglish languagesale 15% off
- Standard79 pagesEnglish languagesale 15% off
- Standard79 pagesEnglish languagee-Library read for1 day
The present document specifies technical characteristics and methods of measurement for Receive-Only Mobile Earth
Stations (ROMES) radio equipment operating under the Land Mobile Satellite Service (LMSS), in the frequency band
1 518 MHz to 1 559 MHz (space-to-earth band).
The ROMESs operate as part of a satellite system providing one-way data communications.
ROMESs could have several configurations, including:
• either Portable Equipment (PE) or Vehicle Installed Equipment (VIE);
• a number of modules including a display/control interface to the user.
NOTE: The relationship between the present document and essential requirements of article 3.2 of
Directive 2014/53/EU [i.2] is given in annex A.
- Standard26 pagesEnglish languagesale 15% off
- Standard26 pagesEnglish languagesale 15% off
- Standard26 pagesEnglish languagee-Library read for1 day
The present document specifies the applicable test conditions, performance assessment and performance criteria for wireless digital video links operating in the frequency band 1,3 GHz to 50 GHz and the associated ancillary equipment, in respect of electromagnetic compatibility.
Technical specifications related to the antenna port and emissions from the enclosure port of the radio equipment are not included in the present document. Such technical specifications are found in the relevant product standard for the effective use of the radio spectrum, see table 1.
Technical specifications related to conducted emission EMC requirements below 9 kHz on the AC mains port of radio equipment are not included in the present document.
NOTE 1: Such technical specifications are normally found in the relevant product family standards for AC mains powered equipment (e.g. EN IEC 61000-3-2/A2 [i.4] and EN 61000-3-3/A2 [i.5]).
NOTE 2: The relationship between the present document and essential requirements of article 3.1(b) of
Directive 2014/53/EU [i.1] is given in annex A.
- Standard17 pagesEnglish languagesale 15% off
- Standard17 pagesEnglish languagesale 15% off
- Standard18 pagesEnglish languagesale 15% off
- Standard18 pagesEnglish languagee-Library read for1 day
The present document specifies technical characteristics and methods of measurement for Wireless Access Systems
(WAS) including Radio Local Area Network (RLAN) equipment operating in the 5 GHz RLAN band.
The present document specifies spectrum access requirements to facilitate spectrum sharing with other equipment.
Radio equipment capable of operating in all or parts of the service frequency bands given in table 1 is within the scope
of the present document.
Provisions for radio equipment capable of operating in all or parts of the 5 725 MHz to 5 850 MHz frequency band
(sub-band 4 as given in table B.1) are contained in annex B. However, operation in sub-band 4 is subject to national
frequency usage conditions. The present document also contains provisions for equipment operating on channels whose
nominal channel bandwidth falls partly in sub-band 3 and partly in sub-band 4.
NOTE 1: The technical requirements for equipment operating in the service frequency bands identified in table 1
are contained in the main part of the present document (see clause 4) while the technical requirements for
equipment operating in the service frequency band identified in table B.1 are contained in annex B.
NOTE 2: The relationship between the present document and essential requirements of article 3.2 of Directive
2014/53/EU [i.1] is given in annex A.
- Standard160 pagesEnglish languagesale 15% off
- Standard160 pagesEnglish languagesale 15% off
- Standard160 pagesEnglish languagesale 15% off
- Standard160 pagesEnglish languagee-Library read for1 day
Scope of this NWI is to give keys and to propose methods to GNSS-specialized laboratories, enabling them to design and produce valuable scenario using the "record and replay" technique in order to assess GNSS-based positioning system.
Already published parts (1-2-3) are mainly dedicated to respectively :
-Definitions and system engineering procedures for the establishment and assessment of performances
-Assessment of basic performances of GNSS-based positioning terminals
-Assessment of security performances of GNSS-based positioning terminals
Part4- Definitions and system engineering procedures for the design and validation of test scenarios- will be based on outcomes from GPSTART2 (SA-CEN/2018-12) which was funded by EC to tackle this specific focus (among others).
- Standard113 pagesEnglish languagee-Library read for1 day
Scope of this NWI is to give keys and to propose methods to GNSS-specialized laboratories, enabling them to design and produce valuable scenario using the "record and replay" technique in order to assess GNSS-based positioning system.
Already published parts (1-2-3) are mainly dedicated to respectively :
-Definitions and system engineering procedures for the establishment and assessment of performances
-Assessment of basic performances of GNSS-based positioning terminals
-Assessment of security performances of GNSS-based positioning terminals
Part4- Definitions and system engineering procedures for the design and validation of test scenarios- will be based on outcomes from GPSTART2 (SA-CEN/2018-12) which was funded by EC to tackle this specific focus (among others).
- Standard113 pagesEnglish languagee-Library read for1 day
The present document applies to the following radio equipment type:
• User Equipment for New Radio (NR).
Requirements throughout the present document are in many cases defined separately for different Frequency Ranges
(FRs). The frequency ranges in which NR can operate according to this version of the present document are identified
as described in Table 1-1.
The present document covers requirements for 5G NR User Equipment from 3GPP™ Release 15 defined in ETSI
TS 138 101-1 [6], ETSI TS 138 101-2 [7], ETSI TS 138 101-3 [8]. This includes the requirements for 5G NR UE
operating bands and 5G NR UE CA operating bands from 3GPP™ Release 15 defined in ETSI TS 138 101-1 [6],
ETSI TS 138 101-2 [7], ETSI TS 138 101-3 [8]. Additionally, it includes requirements for selected NR operating bands
from 3GPP Release 16.
- Standard238 pagesEnglish languagesale 15% off
- Standard239 pagesEnglish languagee-Library read for1 day
The present document applies to the following radio equipment type:
• User Equipment for Evolved Universal Terrestrial Radio Access (E-UTRA).
This radio equipment type is capable of operating in all or any part of the frequency bands given in tables from 1-1
through 1-5.
E-UTRA NB-IoT is designed to operate in the E-UTRA operating bands 1, 3, 8, 20, 28 and 65 defined in table 1-1. The
present document covers requirements for E-UTRA FDD and E-UTRA TDD User Equipment from 3GPP™ Releases 8,
9, 10, 11, 12, and 13 defined in ETSI TS 136 101 [3]. This includes the requirements for E-UTRA UE operating bands
and E-UTRA CA operating bands from 3GPP™ Release 13 defined in ETSI TS 136 101 [3].
NOTE 2: For Band 20:
For user equipment designed to be mobile or nomadic, the requirements in the present document
measured at the antenna port also show conformity to the corresponding requirement defined as
Total Radiated Power (TRP), as described in Commission Decision 2010/267/EU [i.6] and ECC
Decision (09)03 [i.7].
For user equipment designed to be fixed or installed, the present document does not address the
requirements described in Commission Decision 2010/267/EU [i.6] and ECC Decision (09)03 [i.7].
The present document contains requirements to demonstrate that radio equipment both effectively uses and supports the
efficient use of radio spectrum in order to avoid harmful interference.
- Standard152 pagesEnglish languagesale 15% off
- Standard152 pagesEnglish languagesale 15% off
- Standard152 pagesEnglish languagee-Library read for1 day
The present document specifies the applicable test conditions, performance assessment, and performance criteria for
Cellular Communication User Equipment (UE), including Customer Premise Equipment (CPE), Set Top Box (STB)
containing cellular communication technologies, and the associated ancillary equipment in respect of ElectroMagnetic
Compatibility (EMC) for equipment utilizing the technologies in table 1.
Technical specifications related to the antenna port of radio equipment, radiated emissions from the enclosure port of
radio equipment, and combinations of radio and associated ancillary equipment are not included in the present
document. Such technical specifications are normally found in the relevant product standards for the effective use of the
radio spectrum.
NOTE 1: The relationship between the present document and the essential requirements of article 3.1(b) of
Directive 2014/53/EU [i.2] is given in annex A.
NOTE 2: The present document does not cover the radio base stations as specified in ETSI EN 301 489-50 [i.13].
Technical specifications related to conducted emission EMC requirements below 9 kHz on the AC mains port of radio
equipment are not included in the present document.
NOTE 3: Such technical specifications are normally found in the relevant product family standards for AC mains
powered equipment (e.g. EN 61000-3-2 [i.14] and EN 61000-3-3 [i.15]).
- Standard30 pagesEnglish languagesale 15% off
- Standard30 pagesEnglish languagesale 15% off
- Standard30 pagesEnglish languagee-Library read for1 day
The present document specifies technical characteristics and methods of measurements for broadband and wideband
data transmission system equipment including the associated ancillary equipment in respect of electromagnetic
compatibility, as detailed in table 1.
Technical specifications related to the antenna port and emissions from the enclosure port of the radio equipment are
not included in the present document. Such technical specifications are found in the relevant product standards for the
effective use of the radio spectrum.
The present document specifies the applicable test conditions, performance assessment and performance criteria for
broadband and wideband data transmission systems as detailed in table 1.
Technical specifications related to conducted emission EMC requirements below 9 kHz on the AC mains port of radio
equipment are not included in the present document.
The environmental classification and the emission and immunity requirements used in the present document are as
stated in ETSI EN 301 489-1 [1], except for any special conditions included in the present document
- Standard19 pagesEnglish languagesale 15% off
- Standard20 pagesEnglish languagesale 15% off
- Standard21 pagesEnglish languagesale 15% off
- Standard21 pagesEnglish languagesale 15% off
- Standard21 pagesEnglish languagee-Library read for1 day
Common security requirements for radio equipment processing personal data or traffic data or location data being either internet connected radio equipment, radio equipment designed or intended exclusively for childcare; toys and wearable radio equipment. The standard provides technical specifications for radio equipment processing personal data, traffic data or location data, which concerns electrical or electronic products that are capable to communicate over the internet, regardless of whether these products communicate directly or via any other equipment, childcare, toys or wearable radio equipment.
The scope does not apply to 5G network equipment used by providers of public electronic communications networks and publicly available electronic communications services within the meaning of in Directive (EU) 2018/1972 of the European Parliament and of the Council as defined in that Regulation.
- Standard220 pagesEnglish languagee-Library read for1 day
This document specifies common security requirements for internet-connected radio equipment. This document provides technical specifications for radio equipment, which concerns electrical or electronic products that are capable to communicate over the internet, regardless of whether these products communicate directly or via any other equipment.
- Standard180 pagesEnglish languagee-Library read for1 day