ASD-STAN/D 2/S 3 - Elements of Connection (Connectors, Contacts, rear accessories, crimping tools

This document specifies the required characteristics, tests and tooling applicable to female electrical contacts 003, type A, crimp, class S used in elements of connection according to EN 3155 002.
It is used together with EN 3155 001.
The associated male contacts are specified in EN 3155 008.

This document specifies the required characteristics, tests and tooling applicable to female electrical contacts 045, type A, double crimping, class T, used in elements of connection according to EN 3155-002.
It is used together with EN 3155-001.
The associated male contacts are specified in EN 3155-044.
Double crimping contact has a barrel which is designed to crimp conductor and jacket of cable in two locations, one on the conductor and the other on the jacket. This way it protects the conductor from mechanical strengths.

This document specifies the required characteristics, tests and tooling applicable to male electrical Quadrax contacts, shielded, size 8, type E characteristic impedance 100 Ω, crimp, classes P, R and S, used in elements of connection according to EN 3155 002.
It is used together with EN 3155 001.
The associated female contacts are specified in EN 3155 075.

This document specifies the required characteristics, tests and tooling applicable to male electrical contacts 070, type A, crimp, class S, used in elements of connection according to EN 3155 002.
It is used together with EN 3155 001.
The associated female contacts are specified in EN 3155 003, EN 3155 009 and EN 3155 071.

This document specifies the required characteristics, tests and tooling applicable to female electrical contacts 071, type A, crimp, class S used in elements of connection according to EN 3155 002.
It is intended to be used together with EN 3155 001.
The associated male contacts are specified in EN 3155 008 and EN 3155 070.

This document specifies the required characteristics, tests and tooling applicable to female electrical quadrax contacts, shielded, size 8, type E characteristic impedance 100 Ω, crimp, class R, used in elements of connection according to EN 3155-002.
It is used together with EN 3155-001.
The associated male contacts are specified in EN 3155-074.

This document specifies the required characteristics, tests and tooling applicable to male electrical contacts 008, type A, crimp, class S, used in elements of connection according to EN 3155-002.
It is used together with EN 3155-001.
The associated female contacts are specified in EN 3155-003 and EN 3155-009.

This document specifies the required characteristics, tests and tooling applicable to female electrical contacts 017, type A, crimp, class P, used in elements of connection (relay bases) according to EN 3155 002.
It is used together with EN 3155 001.
The associated male contacts are specified in the standards of relays associated to the relay bases listed in EN 3155 002.

This document specifies the required characteristics, tests and tooling applicable to electrical contacts, male 044, type A, double crimping, class T, used in elements of connection according to EN 3155 002.
It is used together with EN 3155 001.
The associated female contacts are specified in EN 3155 045.

This document specifies the required characteristics, tests and tooling applicable to female electrical contacts 015, type A, crimp, class S, used in elements of connection specified in EN 3155-002.
It is used together with EN 3155-001.
The associated male contacts are specified in EN 3155-014.

This document specifies the performances and contact arrangements groups for bayonet coupling circular connectors, intended for use in an operating temperature range of −65 °C to 175 °C or 200 °C continuous.

This document specifies the characteristics of hermetic jam-nut mounted receptacles in the family of bayonet coupling circular connectors, intended for use in an operating temperature range of – 65 °C to 175 °C or 200 °C continuous.
It is applicable to models specified in Table 4.
For plugs and protective covers, see EN 3646-008 and EN 3646-009 respectively.

This document specifies the characteristics of the jam-nut mounted receptacles of the family of bayonet coupling circular connectors, intended for use in an operating temperature range of –65 °C to 175 °C or 200 °C continuous.
This document applies to models specified in Table 4.
For contacts, filler plugs and rear accessories associated with this receptacle, see EN 3646 002. For plugs and protective covers, see EN 3646 008 and EN 3646 009 respectively.

This document specifies the characteristics of square flange mounted receptacles with integrated accessory in the family of circular electrical connectors coupled by threaded ring.
It is applicable to classes specified in Table 3.
For contacts and filler plugs associated with this receptacle, see EN 2997 002. For plugs, see EN 2997 008 and EN 2997 016 and for protective covers, see EN 2997 009.

This document specifies the male coding and attachment system for mounting on fixed housing in the family of rectangular electrical connectors with sealed and non-sealed rear, plastic housing, locking device, for operating temperatures from −55 °C to 175 °C.

This document specifies the required characteristics and tests applicable to female electrical contacts 005, type A, crimp, class T, used in elements of connection according to EN 3155-002.
It is used together with EN 3155-001.
The associated male contacts are specified in EN 3155-004.
The contacts specified by this document are applicable for connector classes specified in EN 2997 series.
This document specifies two contact types (F and H) depending on connector class.

This document specifies the required characteristics, tests and tooling applicable to male electrical contacts, type A, crimp, class S, used in elements of connection according to EN 3155 002.
It is used together with EN 3155 001.
The tests as applied in this document do not permit the full qualification and are expected to be completed with associated components.

This document specifies the required characteristics, tests and tooling applicable to male electrical contacts 004, type A, crimp, class T, used in elements of connection according to EN 3155 002.
It is used together with EN 3155 001.
The associated female contacts are specified in EN 3155 005.
The contacts specified by this document are applicable for connector classes specified in EN 2997 series.
This document specifies two contact types (M and H) depending on connector class.

This document specifies a method of determining the ability of elements of connection to withstand sinusoidal or random vibrations of specified severities.
It is used together with EN 2591-100.
This test is based on EN 60068-2-6 and EN 60068-2-64.

This document specifies:
-   the electrical, mechanical, environmental and dimensional characteristics of electrical contacts used in elements of connection, including coaxial, triaxial and quadrax contacts;
-   the conditions for qualification, acceptance testing and quality assurance;
-   the test programs and groups.
It is applicable to removable crimp contacts, wrap contacts, solder contacts used in connectors or in other elements of electrical connection.
In case of conflict or missing information between the EN 3155-001 and the product standards, the product standard takes precedence.

This document specifies the required characteristics and tests applicable to sealing sleeves used in elements of connection according to EN 3155 002 and EN 4530-002.

This document specifies the required characteristics, tests and tooling applicable to female electrical contacts 009, type A, crimp, class S, used in elements of connection according to EN 3155-002.
It is used together with EN 3155-001.
The associated male contacts are specified in EN 3155-008.

This document specifies the flange mounting receptacles 2 and 4 modules, series 2 used in the family of rectangular electrical connectors, operating temperature 175 °C continuous.
The plugs, flight caps and accessories corresponding to those receptacles are specified in EN 4165-002.

This document specifies cable clamps for 2 and 4 module connectors, series 2 and series 3 used in the family of rectangular electrical connectors, operating temperature 175 °C continuous.

This document specifies the blank chimneys (1 per module cavity) for accessories used in the family of rectangular electrical connectors, operating temperature 175 °C continuous.
The connector accessory body corresponding to those blank chimneys is specified in EN 4165-014.

This document specifies the oval chimneys for accessories for accessories used in the family of rectangular electrical connectors, operating temperature 175 °C continuous.
The connector accessory body corresponding to those oval chimneys is specified in EN 4165-014.

This document specifies accessories of single modules connectors according to EN 4165 024 and EN 4165 025 used in the family of rectangular electrical connectors, operating temperature 175 °C continuous.

This document specifies the plug series 3, for 2 and 4 modules used in the family of rectangular electrical connectors, operating temperature 175 °C continuous. The receptacles and accessories corresponding to those plugs are specified in EN 4165 002.

This document specifies the rack and panel rear mounted plug 2 and 4 modules, series 2 used in the family of rectangular electrical connectors, operating temperature 175 °C continuous. The receptacles and accessories corresponding to those plugs are specified in EN 4165-002.

This document specifies the stackable mounting receptacles series 3, for 2 or 4 modules used in the family of rectangular electrical modular connectors, operating temperature 175 °C continuous. The plugs, flight caps and accessories corresponding to those receptacles are specified in EN 4165 002.

This document specifies the plugs series 2, for 2 and 4 modules used in the family of rectangular electrical connectors, operating temperature 175 °C continuous. The receptacles and accessories corresponding to those plugs are specified in EN 4165 002.

This document specifies the rack and panel plug for 2 and 4 modules, series 2 used in the family of rectangular electrical connectors, operating temperature 175 °C continuous. The receptacles and accessories corresponding to those plugs are specified in EN 4165-002.

This document specifies the single module plug used in the family of rectangular electrical connectors, operating temperature 175 °C continuous. The receptacles and accessories corresponding to this plug are specified in EN 4165-002. The cavity of this connector is uncoded, so it can accept polarized modules N, A, B, C and D as specified in EN 4165-002.

This document specifies the characteristics of jam-nuts for jam-nut receptacles in the family of circular electrical connectors coupled by threaded ring.
It is applicable to classes specified in Table 3.
For receptacles using these jam-nuts, see EN 2997-004, and EN 2997-006 for class SE only.

This document provides a list of removable sealing sleeves as defined in the product standards for use in connectors or other electrical elements of connection.

This document specifies the characteristics of jam-nut mounted receptacles in the family of circular electrical connectors coupled by threaded ring.
It is applicable to the class specified in Table 4.
For contacts, filler plugs, and rear accessories associated with this receptacle, see EN 2997-002. For plugs and protective covers, see EN 2997-008 and EN 2997-009 respectively. For spare jam-nuts and o-rings, see EN 2997-012 and EN 2997-013 respectively.

This document specifies the characteristics of hermetic jam-nut mounted receptacles in the family of circular electrical connectors coupled by threaded ring.
It is applicable to the class specified in Table 4.
For plugs and protective covers, see EN 2997-008 and EN 2997-009 respectively. For spare jam-nuts and O-rings, see EN 2997-012 and EN 2997-013 respectively.

This document specifies methods of measuring thickness of electro-deposited gold or gold alloys coatings on contacts of elements of connection.

This document specifies methods of verifying adhesion of electrodeposited gold and gold alloy coatings on contacts.

This document defines a number of conditions common to rectangular electrical modular connectors for receptacles, plugs and rack and panel, with interchangeable modules and continuous operating temperature 175 °C.

This document specifies the performance and contact arrangements of circular electrical connectors, coupled by threaded ring. It also lists the product standards and models available for selection in this series.

This product standard defines a range of cable outlets, style K, straight, shielded, sealed, self-locking (anti-rotational), heat shrinkable boot, and / or metallic bands for use under the following conditions:
Associated electrical connector(s) EN 3660-002.
Temperature range,   Class N   :   - 65 °C to 200 °C;
Class K   :   - 65 °C to 260 °C;
Class W   :   - 65 °C to 175 °C;
Class T   :   - 65 °C to 175 °C (Nickel PTFE plating);
Class Z   :    - 65 °C to 175 °C (Black zinc nickel plating).
Associated electrical accessories: EN 3660-033 Metallic band (for shield termination).
These cable outlets are designed for termination of overall shielding braid and/or individual cable shields. They accommodate/permit the termination of heat shrinkable boots.

This document defines a range of cable outlets, style K, 90°, shielded, sealed, self-locking (anti rotational) for heat shrinkable boot, and or with metallic bands under the following conditions.
The mating connectors are listed in EN 3660-002.
Temperature range,
Class N : -65 °C to 200 °C;
Class K : -65 °C to 260 °C;
Class W : -65 °C to 175 °C;
Class T : -65 °C to 175 °C (Nickel PTFE plating);
Class Z : -65 °C to 175 °C (Black zinc nickel plating).
Associated electrical accessories : EN 3660-033 Metallic band (for shield termination).
These cable outlets are designed for termination of overall shielding braid and/or individual cable shields. They accommodate/permit the termination of heat shrinkable boots.

This product standard defines a range of cable outlets, style K, 90°, shielded, sealed, self-locking (antirotational), for heat shrinkable boot, and/ or metallic bands for use under the following conditions:
The mating connectors are listed in EN 3660-002.
Temperature range, Class N : − 65 °C to 200 °C;
Class K : − 65 °C to 260 °C;
Class W : − 65 °C to 175 °C;
Class T : − 65 °C to 175 °C (Nickel PTFE plating);
Class Z : − 65 °C to 175 °C (Black zinc nickel plating).
Associated electrical accessories: EN 3660-033 Metallic band (for shield termination).
These cable outlets are designed for termination of overall shielding braid and/or individual cable
shields. They accommodate/permit the termination of heat shrinkable boots.

This product standard defines a range of cable outlets, style K, straight, shielded, sealed, self-locking (anti-rotational), heat shrinkable boot, and / or metallic bands for use under the following conditions:
The mating connectors are listed in EN 3660-002.
Temperature range,   
Class N   :   - 65 °C to 200 °C;
Class K   :   - 65 °C to 260 °C;
Class W   :   - 65 °C to 175 °C;
Class T   :   - 65 °C to 175 °C (Nickel PTFE plating);
Class Z   :    - 65 °C to 175 °C (Black zinc nickel plating).
Associated electrical accessories: EN 3660-033 Metallic band (for shield termination).
These cable outlets are designed for termination of overall shielding braid and / or individual cable shields. They accommodate/permit the termination of heat shrinkable boots.

This document specifies the general characteristics, the conditions for qualification, acceptance and quality assurance, as well as the test programs and groups for threaded ring coupling circular connectors, fire resistant, intended for use in a temperature range from -65 °C to 175 °C continuous or 200 °C continuous according to the classes.

This document specifies a range of grommet nuts, style A, for use under the following conditions:
Associated electrical connector(s): EN 3660 002
Temperature range,   Class N:   −65 °C to 200 °C
   Class W:   −65 °C to 175 °C
   Class K:   −65 °C to 260 °C
   Class A:   −65 °C to 200 °C
   Class T:   −65 °C to 175 °C
   Class Z:   −65 °C to 175 °C

This document specifies a range of cable outlets, style A, straight, unsealed with clamp strain relief for use under the following conditions:
Associated electrical connector(s): EN 3660 002
Temperature range,   Class N:   −65 °C to 200 °C
   Class W:   −65 °C to 175 °C
   Class K:   −65 °C to 260 °C
   Class A:   −65 °C to 200 °C
   Class T:   −65 °C to 175 °C (nickel PTFE plating)
   Class Z:   −65 °C to 175 °C (black zinc nickel plating)

This document specifies a range of cable outlets, style A, 90°, unsealed with clamp strain relief for use under the following conditions:
Associated electrical connector(s): EN 3660 002
Temperature range,   Class N:   −65 °C to 200 °C
   Class W:   −65 °C to 175 °C
   Class K:   −65 °C to 260 °C
   Class A:   −65 °C to 260 °C
   Class T:   −65 °C to 175 °C (nickel PTFE plating)
   Class Z:   −65 °C to 175 °C (black zinc nickel plating)

This document provides a list of removable crimped contacts as specified in the product standards, with wrapped or soldered connections, etc. for use in connectors or other electrical elements of connection. It shows the elements of connection in which they are used.