SIST EN ISO 6145-7:2019/A1:2026
(Amendment)Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 7: Thermal mass-flow controllers - Amendment 1: Correction of Formula C.4 (ISO 6145-7:2018/Amd 1:2026)
- Status
- Published
- Public Enquiry End Date
- 29-Jan-2026
- Publication Date
- 16-Nov-2026
- Technical Committee
- DPL - Gas supply
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 09-Nov-2026
- Due Date
- 14-Jan-2027
- Completion Date
- 17-Nov-2026
SIST EN ISO 6145-7:2019/A1:2026 is the Slovenian adoption of the ISO amendment to Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 7: Thermal mass-flow controllers. It corrects Annex C in the base standard, including Formula C.4, so users applying the uncertainty calculation in this part use the revised expression. The document is published by SIST and is identified as identical to EN ISO 6145-7:2018/prA1.
What does SIST EN ISO 6145-7:2019/A1:2026 specify?
SIST EN ISO 6145-7:2019/A1:2026 specifies amendments to the thermal mass-flow controller part of the ISO 6145 series for preparing calibration gas mixtures by dynamic methods. In practice, it is a correction document: it updates selected text and the uncertainty formula in Annex C rather than setting out a full standalone method.
The amendment is organized around three edits:
- the paragraph following Figure 3
- the titles of C.1 and C.2
- Formula C.4 and the expressions that follow it
Annex C is the part affected by the technical correction. That matters because users who calculate uncertainty from this annex need the exact corrected wording and formula set, not the earlier version.
What are the key requirements of SIST EN ISO 6145-7:2019/A1:2026?
SIST EN ISO 6145-7:2019/A1:2026 corrects the text used with the uncertainty calculation in Annex C. The main practical point is that anyone using the Annex C method for thermal mass-flow controller work should apply the amended wording and formula sequence exactly as published.
Text corrections after Figure 3
SIST EN ISO 6145-7:2019/A1:2026 replaces the percentage expressions after Figure 3 by removing the plus-minus signs. In practical terms, this is a wording correction that affects how the tolerance-style values are read in the surrounding text.
Titles of C.1 and C.2
SIST EN ISO 6145-7:2019/A1:2026 corrects the symbol used in the titles of C.1 and C.2. This matters because the annex headings identify the uncertainty cases covered in the calculation section, so the corrected symbol keeps the notation consistent with the formulas.
Formula C.4
SIST EN ISO 6145-7:2019/A1:2026 replaces Formula C.4 and the formulas that follow it with a corrected uncertainty expression and derivation. In practice, this is the core technical change: users who evaluate relative standard uncertainty in Annex C must use the revised equation chain, not the earlier one.
Derivation by differentiation
SIST EN ISO 6145-7:2019/A1:2026 keeps the explanation that the result comes from differentiating Formula C.3 and substituting into Formula C.4. That tells the reader the corrected expression is not a new method, but a corrected mathematical development of the existing method.
Relative standard uncertainty
SIST EN ISO 6145-7:2019/A1:2026 presents the relative standard uncertainty of ϕA as the outcome of the corrected calculation. For users, this means the annex is meant for uncertainty budgeting in calibration gas mixture preparation, not for a general gas-analysis classification.
What terms does SIST EN ISO 6145-7:2019/A1:2026 define?
SIST EN ISO 6145-7:2019/A1:2026 uses a small set of technical terms that frame the amendment.
- Thermal mass-flow controllers - devices used to control gas flow based on thermal measurement principles; they are the subject of Part 7.
- Calibration gas mixtures - gas mixtures prepared for calibration work, where the mixture composition must be controlled and traceable.
- Dynamic methods - preparation methods that create gas mixtures by controlled flows rather than by static blending.
- Relative standard uncertainty - the uncertainty measure used in Annex C to express the calculation result in relative form.
- Nominally pure gases - gases treated as essentially pure for the specific uncertainty case in C.1.
- Diluting a gas mixture - the second uncertainty case in C.2, where an existing mixture is diluted before use.
Who uses SIST EN ISO 6145-7:2019/A1:2026?
SIST EN ISO 6145-7:2019/A1:2026 is used by laboratories and organizations that prepare calibration gas mixtures with dynamic methods. That includes gas-analysis laboratories, calibration laboratories, and technical staff responsible for uncertainty calculations on gas mixture preparation equipment.
It is also relevant to manufacturers and users of thermal mass-flow controllers, because the corrected annex affects the calculation basis used when specifying, checking, or documenting mixture preparation performance. Quality managers and buyers use it when they need to verify that a calibration process is aligned with the corrected ISO wording.
What changed in SIST EN ISO 6145-7:2019/A1:2026 from the previous edition?
SIST EN ISO 6145-7:2019/A1:2026 is an amendment to ISO 6145-7:2018. The changes stated in the document are limited to:
- a correction in the paragraph following Figure 3
- corrections to the titles of C.1 and C.2
- a replacement of Formula C.4 and the following derivation
What does the SIST EN ISO 6145-7:2019/A1:2026 document contain?
SIST EN ISO 6145-7:2019/A1:2026 contains amendment text only, focused on corrections in Annex C. The document shows the revised wording around Figure 3 and the corrected labels for the two uncertainty cases in C.1 and C.2.
It also provides the corrected Formula C.4 and the subsequent symbolic derivation used to obtain the relative standard uncertainty expression. For engineers and laboratories, that means the document is mainly a calculation correction for design, test, and uncertainty documentation work rather than a broad-method standard.
Relations
- Effective Date
- 28-Jan-2026
- Effective Date
- 01-Dec-2026
Get Certified
Connect with accredited certification bodies for this standard

ECOCERT
Organic and sustainability certification.

Eurofins Food Testing Global
Global leader in food, environment, and pharmaceutical product testing.

Intertek Bangladesh
Intertek certification and testing services in Bangladesh.
Sponsored listings
Frequently Asked Questions
SIST EN ISO 6145-7:2019/A1:2026 is a amendment published by the Slovenian Institute for Standardization (SIST). Its full title is "Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 7: Thermal mass-flow controllers - Amendment 1: Correction of Formula C.4 (ISO 6145-7:2018/Amd 1:2026)". This standard covers: Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 7: Thermal mass-flow controllers - Amendment 1: Correction of Formula C.4 (ISO 6145-7:2018/Amd 1:2026)
Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 7: Thermal mass-flow controllers - Amendment 1: Correction of Formula C.4 (ISO 6145-7:2018/Amd 1:2026)
SIST EN ISO 6145-7:2019/A1:2026 is classified under the following ICS (International Classification for Standards) categories: 71.040.40 - Chemical analysis. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN ISO 6145-7:2019/A1:2026 has the following relationships with other standards: It is inter standard links to SIST EN ISO 23581:2024, SIST EN ISO 6145-7:2019. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN ISO 6145-7:2019/A1:2026 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-december-2026
Analiza plinov - Priprava kalibracijskih plinskih zmesi z uporabo dinamičnih metod
- 7. del: Termični regulatorji masnega pretoka - Dopolnilo A1: Popravek enačbe C.4
(ISO 6145-7:2018/Amd 1:2026)
Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 7:
Thermal mass-flow controllers - Amendment 1: Correction of Formula C.4 (ISO 6145-
7:2018/Amd 1:2026)
Gasanalyse - Herstellung von Kalibriergasgemischen mit Hilfe von dynamischen
Verfahren - Teil 7: Thermische Massendurchflussregler - Änderung 1: Berichtigung der
Gleichung (C.4) (ISO 6145-7:2018/Amd 1:2026)
Analyse des gaz - Préparation des mélanges de gaz pour étalonnage à l'aide de
méthodes dynamiques - Partie 7: Régulateurs thermiques de débit massique -
Amendement 1: Correction de la Formule C.4 (ISO 6145-7:2018/Amd 1:2026)
Ta slovenski standard je istoveten z: EN ISO 6145-7:2018/A1:2026
ICS:
71.040.40 Kemijska analiza Chemical analysis
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 6145-7:2018/A1
EUROPEAN STANDARD
NORME EUROPÉENNE
October 2026
EUROPÄISCHE NORM
ICS 71.040.40
English Version
Gas analysis - Preparation of calibration gas mixtures
using dynamic methods - Part 7: Thermal mass-flow
controllers - Amendment 1: Correction of Formula C.4 (ISO
6145-7:2018/Amd 1:2026)
Analyse des gaz - Préparation des mélanges de gaz Gasanalyse - Herstellung von Kalibriergasgemischen
pour étalonnage à l'aide de méthodes dynamiques - mit Hilfe von dynamischen Verfahren - Teil 7:
Partie 7: Régulateurs thermiques de débit massique - Thermische Massendurchflussregler - Änderung 1:
Amendement 1: Correction de la Formule C.4 (ISO Berichtigung der Gleichung (C.4) (ISO 6145-
6145-7:2018/Amd 1:2026) 7:2018/Amd 1:2026)
This amendment A1 modifies the European Standard EN ISO 6145-7:2018; it was approved by CEN on 3 March 2026.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2026 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 6145-7:2018/A1:2026 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (EN ISO 6145-7:2018/A1:2026) has been prepared by Technical Committee ISO/TC 158
"Analysis of gases" in collaboration with Technical Committee CEN/TC 238 “Test gases, test pressures,
appliance categories and gas appliance types” the secretariat of which is held by AFNOR.
This Amendment to the European Standard EN ISO 6145-7:2018 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by April 2027, and
conflicting national standards shall be withdrawn at the latest by April 2027.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 6145-7:2018/Amd 1:2026 has been approved by CEN as EN ISO 6145-7:2018/A1:2026
without any modification.
International
Standard
ISO 6145-7
Third edition
Gas analysis — Preparation of
2018-12
calibration gas mixtures using
dynamic methods —
AMENDMENT 1
2026-09
Part 7:
Thermal mass-flow controllers
AMENDMENT 1: Correction of
Formula C.4
Analyse des gaz — Préparation des mélanges de gaz pour
étalonnage à l'aide de méthodes dynamiques —
Partie 7: Régulateurs thermiques de débit massique
AMENDEMENT 1: Correction de la Formule C.4
Reference number
ISO 6145-7:2018/Amd.1:2026(en) © ISO 2026
...



