iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 13084-2:2004

(Main)

Free-standing chimneys - Part 2: Concrete chimneys

Free-standing chimneys - Part 2: Concrete chimneys

This Part of this European Standard specifies particular requirements and performance criteria for the design and construction of cast-in-situ concrete chimneys as well as prefabricated concrete chimneys. It identifies requirements to ensure the mechanical resistance and stability of concrete chimneys in accordance with the general requirements given in EN 13084-1.
As for chimneys attached to buildings the criteria given in clause 1 of EN 13084-1:2000 apply.
Unless otherwise stated in the following clauses the basic standard for the design of concrete structures, ENV 1992-1-1, applies.

Freistehende Schornsteine - Teil 2: Betonschornsteine

Dieser Teil der Europäischen Norm behandelt die besonderen Anforderungen und Leistungskriterien für die Bemessung und Ausführung von Ortbeton-Schornsteinen und Fertigteil-Schornsteinen. Sie gibt Anforderungen an, die die mechanische Festigkeit und Standsicherheit von Betonschornsteinen nach den in EN 13084-1 angegebe-nen allgemeinen Anforderungen sicherstellen.
Für an Gebäuden abgestützte Schornsteine gelten die in Abschnitt 1 von EN 13084-1:2000 angegebenen Krite-rien.
Sofern es in den folgenden Abschnitten nicht anders angegeben ist, gilt die Grundnorm für die Bemessung von Betontragwerken ENV 1992-1-1.

Cheminées indépendantes - Partie 2: Cheminées en béton

La présente partie de la Norme européenne couvre les prescriptions et les critères de performance particuliers applicables à la conception et à la construction des cheminées en béton coulées sur place ainsi que des cheminées préfabriquées en béton. Elle définit les prescriptions permettant de s'assurer que la résistance mécanique et la stabilité des cheminées en béton sont conformes aux prescriptions générales de l'EN 13084-1.
De même que pour les cheminées fixées aux bâtiments, les critères donnés à l'article 1 de l'EN 13084-1:2000 s'appliquent.
Sauf indications contraires figurant dans les articles suivants, la prénorme de base, ENV 1992-1-1, relative à la conception des structures en béton s'applique.

Prostostoječi dimniki - 2. del: Betonski dimniki

General Information

Status
Withdrawn
Publication Date
31-Mar-2004
Withdrawal Date
01-Jul-2007
ICS
91.060.40 - Chimneys, shafts, ducts
91.100.30 - Concrete and concrete products
Technical Committee
I13 - Imaginarni 13
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
02-Jul-2007
Due Date
25-Jul-2007
Completion Date
02-Jul-2007
Directive
305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
89/106/EEC - Construction products
Ref Project
EN 13084-2:2001 - Free-standing chimneys - Part 2: Concrete chimneys

Relations

Replaced By
SIST EN 13084-2:2007 - Free-standing chimneys - Part 2: Concrete chimneys
Effective Date
01-Jul-2007

Buy Standard

EN 13084-2:2004EN 13084-2:2004
PreviousNext
Standard
EN 13084-2:2004
English language
23 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Freistehende Schornsteine - Teil 2: BetonschornsteineCheminées indépendantes - Partie 2: Cheminées en bétonFree-standing chimneys - Part 2: Concrete chimneys91.100.30Beton in betonski izdelkiConcrete and concrete products91.060.40Dimniki, jaški, kanaliChimneys, shafts, ductsICS:Ta slovenski standard je istoveten z:EN 13084-2:2001SIST EN 13084-2:2004en01-april-2004SIST EN 13084-2:2004SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13084-2December 2001ICS 91.060.40English versionFree-standing chimneys - Part 2: Concrete chimneysCheminées indépendantes - Partie 2: Cheminées en bétonFreistehende Schornsteine - Teil 2: BetonschornsteineThis European Standard was approved by CEN on 29 September 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2001 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13084-2:2001 ESIST EN 13084-2:2004

Analysis of stresses due to thermal and other actions.19SIST EN 13084-2:2004

Limitations of crack widths.23SIST EN 13084-2:2004
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 13084-2:2007(Main)
Free-standing chimneys - Part 2: Concrete chimneys
EN 13084-2:2007

This European Standard specifies particular requirements and performance criteria for the design and construction of cast-in-situ concrete chimneys as well as prefabricated concrete chimneys. It identifies requirements to ensure the mechanical resistance and stability of concrete chimneys in accordance with the general requirements given in EN 13084-1.
As for chimneys attached to buildings the criteria given in Clause 1 of EN 13084-1:2000 apply.
Unless otherwise stated in the following clauses the basic standard for the design of concrete structures, EN 1992 1 1, applies.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16497-2:2017(Main)
Chimneys - Concrete System Chimneys - Part 2: Balanced flue applications
EN 16497-2:2017

This European Standard specifies the materials, dimensional and performance requirements for straight concrete system chimneys for balanced flue applications comprising a concrete flue liner and a combustion air supply duct, and a combination of compatible chimney components, which may be concrete flue blocks (see Clause 4), obtained or specified from one manufacturing source with product responsibility for the whole chimney.
The European Standard does not apply to concrete system chimneys with back ventilation.
This European Standard does not cover products designated wet (W) in conjunction with corrosion class 3.
This European Standard also applies to concrete system chimneys constructed from storey-height elements and flue blocks reinforced for handling.
This European Standard does not apply to structurally independent (free standing or self-supporting) system chimneys.
NOTE   Any reference to the term flue blocks implies both flue blocks and their fittings, except where otherwise indicated.

  • Standard
    48 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16497-1:2015(Main)
Chimneys - Concrete System Chimneys - Part 1: Non-balanced flue applications
EN 16497-1:2015

This European Standard specifies the materials and the dimensional and performance requirements for straight concrete system chimneys for non-balanced flue applications comprising a concrete flue liner and a combination of compatible chimney components, which may be concrete flue blocks (see Clause 4), obtained or specified from one manufacturing source with product responsibility for the whole chimney.
This European Standard does not apply to concrete system chimneys with back ventilation.
This European Standard does not cover products designated wet (W) in conjunction with corrosion class 3.
This European Standard also applies to concrete system chimneys constructed from storey-height elements and flue blocks reinforced for handling.
NOTE   Any reference to the term flue blocks implies both flue blocks and their fittings, except where otherwise indicated.

  • Standard
    58 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12446:2011(Main)
Chimneys - Components - Concrete outer wall elements
EN 12446:2011

This European Standard specifies the material, dimensional and performance requirements for factory made precast concrete outer wall elements for chimneys including outer wall fittings.
This European Standard covers elements having up to four passages designated to accommodate a combination of flue liners and/or ventilation passages.
This European Standard also relates to storey-height and reinforced outer wall elements.
This European Standard does not apply to structurally independent (freestanding or self-supporting) chimneys constructed using these outer wall elements.
NOTE   Any reference to the term "outer wall element" implies both the outer wall elements and their fittings, except where otherwise indicated.

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1858:2009+A1:2011(Main)
Chimneys - Components - Concrete flue blocks
EN 1858:2008+A1:2011

This European Standard specifies the materials, dimensional and performance requirements for precast concrete flue blocks as defined in Clause 3 for use in chimneys. The flue blocks may be of single wall or multi wall construction. The standard does not apply to flue blocks with back ventilation.
This standard does not cover products designated wet (W) in conjunction with corrosion class 3.
The standard also specifies a type of flue block to dimensionally co-ordinate with masonry unit coursing height, referred to as a type B (Bonding block).
This European Standard also applies to storey-height and flue blocks reinforced for handling.
NOTE   Any reference to the term flue blocks implies both flue blocks and their fittings, except where otherwise indicated.

  • Standard
    55 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1857:2010(Main)
Chimneys - Components - Concrete flue liners
EN 1857:2010

This European Standard specifies the material, dimensional and performance requirements, including methods of test, for precast concrete flue liners and fittings with or without insulation for the construction of multi-wall chimneys.
This document does not cover:
-   high positive pressure (H) designated products;
-   products designated wet (W) in conjunction with corrosion class 3.
This document also applies to storey-height and flue liners reinforced only for handling.
NOTE 1   Any reference to the term flue liners implies both flue liners and their fittings, except where otherwise indicated.
NOTE 2   The pressure classes and corrosion classes are defined in EN 1443.

  • Standard
    49 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13084-2:2007(Main)
Free-standing chimneys - Part 2: Concrete chimneys
EN 13084-2:2007

This European Standard specifies particular requirements and performance criteria for the design and construction of cast-in-situ concrete chimneys as well as prefabricated concrete chimneys. It identifies requirements to ensure the mechanical resistance and stability of concrete chimneys in accordance with the general requirements given in EN 13084-1.
As for chimneys attached to buildings the criteria given in Clause 1 of EN 13084-1:2000 apply.
Unless otherwise stated in the following clauses the basic standard for the design of concrete structures, EN 1992 1 1, applies.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1858:2009/kFprA1:2011(Amendment)
Chimneys - Components - Concrete flue blocks
EN 1858:2008/FprA1

This European Standard specifies the materials, dimensional and performance requirements for precast concrete flue blocks as defined in Clause 3 for use in chimneys. The flue blocks may be of single wall or multi wall construction. The standard does not apply to flue blocks with back ventilation. This standard does not cover products designated wet (W) in conjunction with corrosion class 3. The standard also specifies a type of flue block to dimensionally co-ordinate with masonry unit coursing height, referred to as a type B (Bonding block). This European Standard also applies to storey-height and flue blocks reinforced for handling. NOTE Any reference to the term flue blocks implies both flue blocks and their fittings, except where otherwise indicated.

  • Draft
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 488-2:2025(Main)
District heating and district cooling pipes - Bonded pipe systems for directly buried hot and cold water networks - Factory made steel valve assembly for draining and venting, polyurethane thermal insulation and a casing of polyethylene
EN 488-2:2025

This document specifies requirements for factory made thermally insulated bonded steel service valve assemblies for filling, draining, venting and operation purposes for directly buried hot and cold water networks in accordance with EN 13941-1, comprising a steel service valve, steel service pipe, polyurethane (PUR) foam thermal insulation and a casing of polyethylene (PE).
This document applies of steel service valve assemblies with an internal pressure of maximum 2,5 MPa.
The principles of this document can be applied to thermal insulated bonded steel service valve assemblies with internal pressures higher than 2,5 MPa, provided that special attention is paid to the effects of pressure.
The steel service valve assembly can also include the following additional elements: measuring wires, spacers, and diffusion barriers.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 15698-2:2025(Main)
District heating pipes - Bonded twin pipe systems for directly buried hot water networks - Part 2: Factory made fitting and valve assemblies of steel service pipes, polyurethane thermal insulation and a casing of polyethylene
EN 15698-2:2025

This document specifies requirements and test methods for fitting and steel valve assemblies of factory made thermally insulated bonded twin pipe assemblies for hot water networks in accordance with EN 13941-1, comprising two steel service pipes, in most cases steel fittings and/or steel valves, steel components, polyurethane (PUR) foam thermal insulation and one casing of polyethylene.
NOTE   Steel components can be e.g. fixing bars.
The twin pipe assembly can also include the following additional elements: measuring wires, spacers and diffusion barriers.
This document covers the following assemblies:
-   fittings: bends, T-pieces and reducers;
-   valves for main line.
This document applies to fitting assemblies with an internal pressure of at least 1,6 MPa and steel valve assemblies with a maximum internal pressure of 2,5 MPa.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day