SIST EN 12385-4:2003
(Main)Steel wire ropes - Safety - Part 4: Stranded ropes for general lifting applications
Steel wire ropes - Safety - Part 4: Stranded ropes for general lifting applications
This part of this European Standard specifies the additional materials, manufacturing and testing requirements for stranded ropes for general lifting applications to those given in part 1.
This Part of this European Standard does not establish requirements for information for use other than those given in clause 7 of part 1. Neither does it cover the requirements for ropes fitted with terminations.
Minimum breaking force values for the more common classes, sizes and grades of rope are provided in
Tables 4 to 16.
Drahtseile aus Stahldraht - Sicherheit - Teil 4: Litzenseile für allgemeine Hebezwecke
Dieser Teil dieser Europäischen Norm legt die besonderen Anforderungen an Werkstoffe, Herstellung und Prüfung für Litzenseile für allgemeine Hebezwecke fest.
Die besonderen Gefährdungen, die in diesem Teil behandelt werden, sind in Abschnitt 4 angegeben.
Dieser Teil dieser Europäischen Norm legt über die Anforderungen in Teil 1, Abschnitt 7, hinausgehend keine weiteren Anforderungen an Anwendungshinweise fest. Er enthält auch keine Anforderungen an Seile mit Endverbindungen.
Mindestbruchkräfte für die gebräuchlicheren Seilklassen, Durchmesser und Seilfestigkeitsklassen sind in den Tabellen 5 bis 17 angegeben.
Câbles en acier - Sécurité - Partie 4: Câbles a torons pour applications générales de levage
La présente partie de cette Norme européenne spécifie les matériaux particuliers, les prescriptions pour la fabrication et les essais des câbles toronnés pour les applications générales de levage.
Les phénomènes dangereux particuliers couverts par la présente partie sont identifiés à l'article 4.
La présente partie de cette Norme européenne ne donne pas de prescriptions relatives à l'information pour l'utilisation autres que celles données à l'article 7 de la partie 1. Elle ne couvre pas non plus les prescriptions pour les câbles munis de terminaisons.
Les valeurs de charges de rupture minimales pour les classes, les dimensions et les catégories de câble les plus courantes sont fournies dans les Tableaux 5 à 17.
Jeklene žične vrvi - Varnost - 4. del: Pramenaste vrvi za splošne dvigalne namene
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Steel wire ropes - Safety - Part 4: Stranded ropes for general lifting applicationsCâbles en acier - Sécurité - Partie 4: Câbles a torons pour applications générales de levageDrahtseile aus Stahldraht - Sicherheit - Teil 4: Litzenseile für allgemeine HebezweckeTa slovenski standard je istoveten z:EN 12385-4:2002SIST EN 12385-4:2003en77.140.65ICS:SLOVENSKI
STANDARDSIST EN 12385-4:200301-maj-2003
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 12385-4October 2002ICS 77.140.65English versionSteel wire ropes - Safety - Part 4: Stranded ropes for generallifting applicationsCâbles en acier - Sécurité - Partie 4: Câbles à torons pourapplications de levage généralesDrahtseile aus Stahldraht - Sicherheit - Teil 4: Litzenseilefür allgemeine HebezweckeThis European Standard was approved by CEN on 12 November 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 12385-4:2002 E
fibre; b)
steel, as an independent wire rope (IWRC) or wire strand (WSC); c)
composite (e.g. steel and fibre or steel and solid polymer);d) cushion core; ore) solid polymer.5.2.3 LubricantThe lubricant shall comply with ISO 4346.5.3 Rope manufacture5.3.1 LubricationAt least the strands shall be lubricated.5.3.2 ConstructionThe rope construction shall be either: a)
one of those covered by Tables 5 to 17; or b)
another single layer or parallel-closed or rotation-resistant rope construction as specified by themanufacturer and covered by the respective classes in EN 12385-2.5.3.3 Rope gradeFor rope sizes up to and including 60 mm diameter, the rope grade shall be 1770, 1960 or 2160 or an intermediategrade as specified by the manufacturer, but not exceeding 2160.NOTERopes larger than 60mm diameter may not have a rope grade.5.4 Diameter5.4.1 TolerancesWhen measured in accordance with 6.3.1 of EN 12385-1:2002, the measured diameter shall not vary from thenominal diameter by more than the values given in Table 3. For ropes with diameters from 2 mm to 5 mm inclusive,the tolerance shall be rounded up to the nearest 0,05 mm.
Refer to the definitions given in EN 12385-2 for derivation of the formula for calculation of minimum breaking force.5.6 Designation and classificationRope designation and classification shall conform to EN 12385-2.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.