SIST ETS 300 399-4 E1:2003
(Main)Frame relay services; Part 4: Broadband Integrated Services Digital Network (B-ISDN); Frame relay bearer service; Service definition
General Information
- Abstract
Definition of Frame Relay Bearer Service supported on ATM and B-ISDN networks.
- Status
- Published
- Publication Date
- 30-Nov-2003
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 01-Dec-2003
- Due Date
- 01-Dec-2003
- Completion Date
- 01-Dec-2003
Overview
SIST ETS 300 399-4 E1:2003 defines the frame relay bearer service for use on Broadband Integrated Services Digital Network (B-ISDN) and Asynchronous Transfer Mode (ATM) networks. Developed by the Slovenski inštitut za standardizacijo (SIST) and aligned with the European Telecommunications Standards Institute (ETSI), this standard specifies the network-specific aspects of frame relay services in broadband networks. It complements other frame relay standards and provides essential guidelines to ensure interoperability, reliability, and consistency in telecommunication systems utilizing B-ISDN.
Key Topics
- Frame Relay Bearer Service Definition: Outlines the characteristics and requirements for providing bi-directional frame relay bearer services over B-ISDN and ATM networks.
- Service Architecture: Describes the structure of user-network interfaces at S or T reference points, enabling the establishment of on-demand or permanent virtual channels to multiple destinations.
- Service Classes: Details multiple classes of service based on Asynchronous Transfer Mode (ATM) connections, including permanent and on-demand options. Each class supports specific quality and monitoring requirements.
- Procedures & Protocols: Specifies the required ATM adaptation layers, data link protocols (such as Q.922), and signaling protocols (such as Q.933 and Q.2931) necessary for frame relay communication.
- Numbering Plans: Accommodates both E.164 and X.121 numbering systems, supporting a variety of service provider configurations.
- Attributes & Values: Defines key service attributes, such as information transfer mode, transfer rates, connection types, and bi-directional symmetric communication setup.
Applications
The standard is central to the deployment and management of frame relay services over B-ISDN and ATM-based networks. Its practical applications include:
- Carrier and Service Provider Networks: Enables telecommunications operators to offer robust, scalable, and high-speed data link layer services to enterprise and carrier customers.
- Enterprise WAN Solutions: Supports reliable virtual channel connectivity for organizations needing managed wide-area networks across geographical locations.
- ATM and B-ISDN Interworking: Facilitates seamless interworking between B-ISDN-based frame relay services and other network types, ensuring compatibility and interoperability.
- Flexible Service Deployment: Supports both permanent and on-demand virtual channel establishment, allowing for efficient use of network resources and dynamic adaptation to customer needs.
- Numbering Adaptability: Provides flexible numbering options to suit diverse operational and regulatory requirements, enhancing global service applicability.
Related Standards
For a comprehensive implementation of frame relay bearer services on B-ISDN networks, the following standards should also be considered:
- SIST ETS 300 399-1: Frame relay services; Part 1: General description
- SIST ETS 300 467: Support of Frame Relay Bearer Service (FRBS) in B-ISDN and frame relay interworking
- ETS 300 299 & ETS 300 300: Physical layer interfaces for B-ISDN
- ETS 300 428: ATM Adaptation Layer (AAL) specification - Type 5
- ITU-T Q.922, Q.933, Q.2931: Data link and signaling protocols for frame relay and B-ISDN
- CCITT E.164, X.121: International numbering plans for ISDN and data networks
SIST ETS 300 399-4 E1:2003 provides a solid foundation for implementing reliable and standardized frame relay bearer services on broadband digital networks, supporting advanced telecom solutions across diverse industrial, commercial, and telecommunications sectors.
Get Certified
Connect with accredited certification bodies for this standard
ANCE
Mexican certification and testing association.
Intertek Slovenia
Intertek testing, inspection, and certification services in Slovenia.
LNE (Laboratoire National de Métrologie et d'Essais)
French national laboratory for metrology and testing.
Sponsored listings
Frequently Asked Questions
SIST ETS 300 399-4 E1:2003 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Frame relay services; Part 4: Broadband Integrated Services Digital Network (B-ISDN); Frame relay bearer service; Service definition". This standard covers: Definition of Frame Relay Bearer Service supported on ATM and B-ISDN networks.
Definition of Frame Relay Bearer Service supported on ATM and B-ISDN networks.
SIST ETS 300 399-4 E1:2003 is classified under the following ICS (International Classification for Standards) categories: 33.040.01 - Telecommunication systems in general; 33.080 - Integrated Services Digital Network (ISDN). The ICS classification helps identify the subject area and facilitates finding related standards.
SIST ETS 300 399-4 E1:2003 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-december-2003
Storitve blokovnega posredovanja – 4. del: Širokopasovno digitalno omrežje z
integriranimi storitvami (B-ISDN) – Nosilna storitev blokovnega posredovanja –
Definicija storitve
Frame relay services; Part 4: Broadband Integrated Services Digital Network (B-ISDN);
Frame relay bearer service; Service definition
Ta slovenski standard je istoveten z: ETS 300 399-4 Edition 1
ICS:
33.040.01 Telekomunikacijski sistemi Telecommunication systems
na splošno in general
33.080 Digitalno omrežje z Integrated Services Digital
integriranimi storitvami Network (ISDN)
(ISDN)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN ETS 300 399-4
TELECOMMUNICATION February 1998
STANDARD
Source: NA Reference: DE/NA-053207
ICS: 33.020
Key words: ATM, bearer, B-ISDN, FMBS, frame relay,
Frame relay services;
Part 4: Broadband Integrated Services Digital Network (B-ISDN);
Frame relay bearer service;
Service definition
ETSI
European Telecommunications Standards Institute
ETSI Secretariat
Postal address: F-06921 Sophia Antipolis CEDEX - FRANCE
Office address: 650 Route des Lucioles - Sophia Antipolis - Valbonne - FRANCE
X.400: c=fr, a=atlas, p=etsi, s=secretariat - Internet: secretariat@etsi.fr
Tel.: +33 4 92 94 42 00 - Fax: +33 4 93 65 47 16
Copyright Notification: No part may be reproduced except as authorized by written permission. The copyright and the
foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 1998. All rights reserved.
Page 2
ETS 300 399-4: February 1998
Whilst every care has been taken in the preparation and publication of this document, errors in content,
typographical or otherwise, may occur. If you have comments concerning its accuracy, please write to
"ETSI Editing and Committee Support Dept." at the address shown on the title page.
Page 3
ETS 300 399-4: February 1998
Contents
Foreword .5
Introduction.5
1 Scope .7
2 Normative references.7
3 Definitions.8
4 Abbreviations.8
5 General definition .8
6 Description of the frame relay service.8
7 Service classes .8
8 Procedures.9
9 Network capabilities for charging .9
10 Interworking.9
11 Attributes and values of attributes.9
12 Dynamic description.10
13 Numbering plan.10
Annex A (informative): Bibliography.12
History.13
Page 4
ETS 300 399-4: February 1998
Blank page
Page 5
ETS 300 399-4: February 1998
Foreword
This European Telecommunication Standard (ETS) has been produced by the Network Aspects (NA)
Technical Committee of the European Telecommunications Standards Institute (ETSI).
The content of this ETS is adapted from CCITT Recommendation I.233.1.
This ETS consists of 4 parts as follows:
Part 1: "Part 1: General description".
Part 2: "Part 2: Integrated Services Digital Network (ISDN); Frame relay bearer service; Service
definition".
Part 3: "Part 3: Integrated Services Digital Network (ISDN); Frame relay data transmission service;
Service definition".
Part 4: "Part 4: Broadband Integrated Services Digital Network (B-ISDN); Frame relay bearer
service; Service definition".
Transposition dates
Date of adoption of this ETS: 23 January 1998
Date of latest announcement of this ETS (doa): 31 May 1998
Date of latest publication of new National Standard
or endorsement of this ETS (dop/e): 30 November 1998
Date of withdrawal of any conflicting National Standard (dow): 30 November 1998
Introduction
The purpose of this ETS is to describe the network specific aspects of the frame relay service when it is
offered on a Broadband Integrated Services Digital Network (B-ISDN).
Page 6
ETS 300 399-4: February 1998
Blank page
Page 7
ETS 300 399-4: February 1998
1 Scope
This European Telecommunication Standard (ETS) specifies the network specific aspects of the frame
relay service when it is offered on a Broadband Integrated Services Digital Network (B-ISDN); the service
is called "frame relay bearer service".
This ETS is applicable for all B-ISDNs offering a frame relay bearer service.
This ETS should be complemented with ETS 300 399-1 [1], for the common part of the frame relay
service.
2 Normative references
This ETS incorporates by dated and undated reference, provisions from other publications. These
normative references are cited at the appropriate places in the text and the publications are listed
hereafter. For dated references, subsequent amendments to or revisions of any of these publications
apply to this ETS only when incorporated in it by amendment or revision. For undated references the latest
edition of the publication referred to applies.
[1] ETS 300 399-1: "Frame relay services; Part 1: General description".
[2] ETS 300 467: "Broadband Integrated Services Digital Network (B-ISDN);
Support of Frame Relay Bearer Service (FRBS) in B-ISDN and frame relay
interworking between B-ISDN and other networks".
[3] CCITT Recommendation E.164: "Numbering plan for the ISDN era".
[4] ETS 300 299: "Cell based user network access physical layer interfaces for B-
ISDN applications".
[5] ETS 300 300: "SDH based user network access physical layer interfaces for B-
ISDN applications".
[6] CCITT Recommendation Q.922: "ISDN data link layer specification for frame
mode bearer services".
[7] ITU-T Recommendation Q.933: "Signalling specification for frame mode basic
call control".
[8] ITU-T Recommendation Q.2100: "B-ISDN signalling ATM Adaptation Layer
(SAAL) overview description".
[9] ITU-T Recommendation Q.2110: "B-ISDN ATM Adaptation Layer - Service
Specific Connection Oriented Protocol (SSCOP)".
[10] ITU-T Recommendation Q.2130: "B-ISDN ATM Adaptation Layer - Service
specific co-ordination function for support of signalling at the user-network
interface (SSCF at UNI)".
[11] CCITT Recommendation X.121: "International numbering plan for public data
networks".
[12] ETS 300 428: "Broadband Integrated Services Digital Network (B-ISDN);
Asynchronous Transfer Mode (ATM) Adaptation Layer (AAL) specification -
Type 5".
[13] ETS 300 298-2: "Broadband Integrated Services Digital Network (B-ISDN);
Asynchronous Transfer Mode (ATM); Basic characteristics and functional
specifications of ATM; Part 2: B-ISDN ATM layer specifications".
...