SIST EN 10305-5:2003

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Präzisionsstahlrohre - Technische Lieferbedingungen - Teil 5: Geschweißte und maßumgeformte Rohre mit quadratischem oder rechteckigem QuerschnittTubes de précision en acier - Conditions techniques de livraison - Partie 5: Tubes soudés et calibrés de section carrée ou rectangulaireSteel tubes for precision applications - Technical delivery conditions - Part 5: Welded and cold sized square and rectangular tubes77.140.75Jeklene cevi in cevni profili za posebne nameneSteel pipes and tubes for specific useICS:Ta slovenski standard je istoveten z:EN 10305-5:2003SIST EN 10305-5:2003en01-november-2003SIST EN 10305-5:2003SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 10305-5April 2003ICS 77.140.75English versionSteel tubes for precision applications - Technical deliveryconditions - Part 5: Welded and cold sized square andrectangular tubesTubes de précision en acier - Conditions techniques delivraison - Partie 5: Tubes soudés et calibrés de sectioncarrée ou rectangulairePräzisionsstahlrohre - Technische Lieferbedingungen - Teil5: Geschweißte und maßumgeformte Rohre mitquadratischem oder rechteckigem QuerschnittThis European Standard was approved by CEN on 14 February 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 10305-5:2003 ESIST EN 10305-5:2003

List of corresponding former symbols for delivery conditions and national steeldesignations.20Bibliography.21SIST EN 10305-5:2003

1) In preparation, until this document is published as a European Standard a corresponding national standard should be agreedat the time of enquiry and order.SIST EN 10305-5:2003

this part of this European Standard (see 5.2);e) the delivery condition including the surface condition (see 7.2.1 and 7.2.2).6.2 OptionsA number of options are specified in this part of this European Standard and these are listed below. In the eventthat the purchaser does not indicate a wish to implement any of these options at the time of enquiry and order, thetubes shall be supplied in accordance with the basic specification (see 6.1).1) suitability for hot dip galvanizing (see 7.2.1);2) specification of a steel g
...