oSIST prEN 13241:2021

SLOVENSKI STANDARD
01-januar-2021
Vrata v industrijske in javne prostore ter garažna vrata - Standard za proizvod,
zahtevane lastnosti
Industrial, commercial, garage doors and gates - Product standard, performance
characteristics
Tore - Produktnorm, Leistungseigenschaften
Portes et portails industriels, commerciaux et de garage - Norme de produit,
caractéristiques de performance
Ta slovenski standard je istoveten z: prEN 13241
ICS:
91.060.50 Vrata in okna Doors and windows
91.090 Konstrukcije zunaj stavb External structures
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2020
ICS 91.090 Will supersede EN 13241:2003+A2:2016
English Version
Industrial, commercial, garage doors and gates - Product
standard, performance characteristics
Portes et portails industriels, commerciaux et de Tore - Produktnorm, Leistungseigenschaften
garage - Norme de produit, caractéristiques de
performance
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 33.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 13241:2020 E
worldwide for CEN national Members.

Contents Page
European foreword . 5
Introduction . 6
1 Scope . 7
1.1 General . 7
1.2 Exclusions . 7
2 Normative references . 8
3 Terms and definitions . 9
4 Characteristics . 10
4.1 Safety in use. 10
4.1.1 Operating forces (safety in use) (only for automatic devices) . 10
4.1.2 Safe opening . 10
4.2 Water tightness . 10
4.3 Resistance to wind load . 10
4.4 Thermal transmittance (resistance) . 11
4.5 Air permeability . 11
4.6 Resistance to fire (for doors with fire resistance and smoke control only, for fire
compartmentation uses) . 12
4.7 Smoke control (for doors with fire resistance and smoke control only, only for
applications where limitation of smoke spread is required) . 12
4.8 Ability to release (for doors with fire resistance and smoke control only) . 12
4.9 Reaction to fire (concerning the components of the product) . 12
4.10 Durability . 13
4.10.1 Durability against UV action, weathering, ageing and degradation of water tightness,
thermal resistance and air permeability . 13
4.10.2 Durability of the ability to release (for doors with fire resistance and smoke control
only) . 13
4.10.3 Durability of self-closing (for doors with fire resistance and smoke control only, only
for self-closing doors) . 13
4.11 Definition of geometry of glass components . 14
4.12 Mechanical resistance . 14
4.13 Self-closing (for self-closing doors with fire resistance and smoke control only) . 14
4.14 Release of dangerous substances . 14
5 Verification of the performance classes . 14
5.1 Safety in use. 14
5.1.1 Operating forces (safety in use) (only for automatic devices) . 14
5.1.2 Safe opening . 14
5.2 Water tightness . 14
5.3 Resistance to wind load . 14
5.4 Thermal transmittance (resistance) . 15
5.5 Air permeability . 15
5.6 Resistance to fire (for doors with fire resistance and smoke control only, for fire
compartmentation uses) . 15
5.7 Smoke control (only for applications where limitation of smoke spread is required) . 15
5.8 Ability to release. 15
5.9 Reaction to fire (concerning the components of the product) . 16
5.10 Durability . 16
5.10.1 Durability against UV action, weathering and ageing and degradation of water
tightness, thermal resistance and air permeability . 16
5.10.2 Durability of the ability to release (for doors with fire resistance and smoke control
only) . 16
5.10.3 Durability of self-closing (for doors with fire resistance and smoke control only, only
for self-closing doors) . 16
5.11 Definition of geometry of glass components . 16
5.12 Mechanical resistance . 16
6 Assessment and verification of constancy of performance – AVCP . 16
6.1 General . 16
6.2 Assessment of performance . 17
6.2.1 General . 17
6.2.2 Test samples, testing and assessment criteria . 17
6.3 Verification of constancy of performance . 19
6.3.1 Factory production control (FPC) . 19
6.3.2 Initial inspection of factory and of FPC (only for products covered by AVCP system 1). 21
6.3.3 Continuous surveillance of FPC (only for products covered by AVCP system 1) . 22
7 Marking, labelling and packaging . 22
Annex A (normative) Pre-test conditioning (wind load test) . 23
A.1 General . 23
A.2 Before the resistance to wind load test . 23
A.2.1 General . 23
A.2.2 Pre-test condition . 23
Annex B (normative) Pre-test conditioning (resistance to fire and/or smoke control test) . 24
B.1 General . 24
B.2 Before the resistance to fire test . 24
B.2.1 General . 24
Operability test . 24
Shakedown conditioning . 24
B.3 Before the smoke control test . 25
B.3.1 General . 25
B.3.2 Operability test . 25
B.4 Self-closing test . 25
B.4.1 Self-closing for doors without coordinating devices . 25
B.4.2 Self-closing for samples fitted with door coordinat
...