SIST EN 10216-2:2014/kFprA1:2019
(Amendment)Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties
General Information
- Abstract
This European Standard specifies the technical delivery conditions in two test categories for seamless tubes of circular cross section, with specified elevated temperature properties, made of non-alloy and alloy steel.
This Part of EN 10216 may also be applied for tubes of non-circular cross section; necessary modification should be agreed at the time of enquiry and order.
NOTE Once this standard is published in the Official Journal of the European Union (OJEU) under Directive 97/23/EC, presumption of conformity to the Essential Safety Requirements (ESR) of Directive 97/23/EC is limited to technical data of materials in this standard and does not presume adequacy of the material to a specific item of equipment. Consequently, the assessment of the technical data stated in this material standard against the design requirements of this specific item of equipment to verify that the ESRs of the Pressure Equipment Directive are satisfied, needs to be done by the designer or manufacturer of the pressure equipment, taking also into account the subsequent manufacturing processes which may affect properties of the base materials.
- Status
- Not Published
- Public Enquiry End Date
- 31-Jul-2018
- Technical Committee
- IFEK - Ferrous metals
- Current Stage
- 98 - Abandoned project (Adopted Project)
- Start Date
- 30-Dec-2019
- Due Date
- 04-Jan-2020
- Completion Date
- 30-Dec-2019
Overview
SIST EN 10216-2:2014/kFprA1:2019 specifies the technical delivery conditions for seamless steel tubes designed for pressure purposes, focusing on both non-alloy and alloy steel tubes with specified elevated temperature properties. This standard is applicable to tubes with circular cross sections and can also be extended to non-circular tubes upon agreement during enquiry and order.
The standard ensures consistent quality and performance for seamless steel tubes used in demanding pressure equipment applications, providing definitions on material properties, manufacturing processes, testing, and documentation. Published by the Slovenian Institute for Standardization (SIST), this standard harmonizes with the European Union pressure equipment directive.
Key Topics
- Scope and Purpose: Outlines requirements for seamless steel tubes with elevated temperature properties, including both non-alloy and alloy types.
- Technical Delivery Conditions: Details material selection, dimensional tolerances, and quality specifications.
- Manufacturing Process: Requires seamless production techniques to ensure integrity under pressure.
- Testing and Inspection: Specifies product analysis, mechanical testing, creep rupture strength, and non-destructive testing protocols.
- Documentation: Defines the need for comprehensive inspection documents and certificates according to recognized standards.
- Compliance with EU Directives: Provides guidance on presumption of conformity with the essential requirements of Directive 2014/68/EU (Pressure Equipment Directive).
Applications
SIST EN 10216-2 is widely used across various industries that require reliable performance in high-temperature and high-pressure environments. Typical application areas include:
- Pressure Vessels: Boilers, heat exchangers, and superheaters used in power generation and industrial plants.
- Petrochemical Industry: Pipelines and process equipment exposed to elevated temperatures and pressures.
- Chemical Plants: Systems transporting aggressive or heated media.
- Mechanical Engineering: Components subject to thermal and pressure loads.
- Energy Sector: Steam piping and auxiliary plant equipment.
The standard’s robust requirements support equipment manufacturers, designers, and engineers by ensuring that selected tubes meet stringent safety and performance criteria for operation in critical service conditions.
Related Standards
- EN 10216 Series: Covers seamless steel tubes for both pressure and general purposes, with various parts focusing on different steel types and application requirements.
- EN 10204: Specifies types of inspection documents for metallic products, crucial for traceability and quality assurance.
- EN ISO 148-1: Describes test methods for Charpy pendulum impact, relevant for verifying impact resistance.
- EN ISO 377: Provides sampling and test specimen preparation guidelines for mechanical testing.
- EN ISO 14284: Covers sampling and preparation for chemical composition analysis.
- ISO 11484: Defines qualification systems for non-destructive testing personnel.
These related standards support SIST EN 10216-2 by ensuring harmonized testing, inspection, and certification practices across the steel tube and pressure equipment industries.
By adhering to SIST EN 10216-2:2014/kFprA1:2019, stakeholders ensure compliance with European regulatory requirements for pressure equipment and benefit from proven technical solutions for the safe operation of seamless steel tubes in challenging environments. This standard plays a critical role in safeguarding both operational integrity and human safety.
Relations
- Effective Date
- 19-Jan-2023
- Effective Date
- 09-Mar-2016
Get Certified
Connect with accredited certification bodies for this standard
Element Materials Technology
Materials testing and product certification.
Inštitut za kovinske materiale in tehnologije
Institute of Metals and Technology. Materials testing, metallurgical analysis, NDT.
Institut za varilstvo d.o.o. (Welding Institute)
Slovenia's leading welding institute since 1952. ISO 3834, EN 1090, pressure equipment certification, NDT personnel, welder qualification. Only IIW Au
Sponsored listings
Frequently Asked Questions
SIST EN 10216-2:2014/kFprA1:2019 is a draft published by the Slovenian Institute for Standardization (SIST). Its full title is "Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties". This standard covers: This European Standard specifies the technical delivery conditions in two test categories for seamless tubes of circular cross section, with specified elevated temperature properties, made of non-alloy and alloy steel. This Part of EN 10216 may also be applied for tubes of non-circular cross section; necessary modification should be agreed at the time of enquiry and order. NOTE Once this standard is published in the Official Journal of the European Union (OJEU) under Directive 97/23/EC, presumption of conformity to the Essential Safety Requirements (ESR) of Directive 97/23/EC is limited to technical data of materials in this standard and does not presume adequacy of the material to a specific item of equipment. Consequently, the assessment of the technical data stated in this material standard against the design requirements of this specific item of equipment to verify that the ESRs of the Pressure Equipment Directive are satisfied, needs to be done by the designer or manufacturer of the pressure equipment, taking also into account the subsequent manufacturing processes which may affect properties of the base materials.
This European Standard specifies the technical delivery conditions in two test categories for seamless tubes of circular cross section, with specified elevated temperature properties, made of non-alloy and alloy steel. This Part of EN 10216 may also be applied for tubes of non-circular cross section; necessary modification should be agreed at the time of enquiry and order. NOTE Once this standard is published in the Official Journal of the European Union (OJEU) under Directive 97/23/EC, presumption of conformity to the Essential Safety Requirements (ESR) of Directive 97/23/EC is limited to technical data of materials in this standard and does not presume adequacy of the material to a specific item of equipment. Consequently, the assessment of the technical data stated in this material standard against the design requirements of this specific item of equipment to verify that the ESRs of the Pressure Equipment Directive are satisfied, needs to be done by the designer or manufacturer of the pressure equipment, taking also into account the subsequent manufacturing processes which may affect properties of the base materials.
SIST EN 10216-2:2014/kFprA1:2019 is classified under the following ICS (International Classification for Standards) categories: 23.020.32 - Pressure vessels; 77.140.75 - Steel pipes and tubes for specific use. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 10216-2:2014/kFprA1:2019 has the following relationships with other standards: It is inter standard links to SIST EN 10216-2:2014+A1:2020, SIST EN 10216-2:2014. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN 10216-2:2014/kFprA1:2019 is associated with the following European legislation: EU Directives/Regulations: 2014/68/EU, 97/23/EC; Standardization Mandates: M/071. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
SIST EN 10216-2:2014/kFprA1:2019 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 10216-2:2014/oprA1:2018
01-julij-2018
1HYDUMHQHMHNOHQHFHYL]DWODþQHSRVRGH7HKQLþQLGREDYQLSRJRMLGHO
1HOHJLUDQHLQOHJLUDQHMHNOHQHFHYLVVSHFLILFLUDQLPLODVWQRVWPL]DGHORSUL
SRYLãDQLKWHPSHUDWXUDK'RSROQLOR$
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non
-alloy and alloy steel tubes with specified elevated temperature properties
Nahtlose Stahlrohre für Druckbeanspruchungen - Technische Lieferbedingungen - Teil 2:
Rohre aus unlegierten und legierten Stählen mit festgelegten Eigenschaften bei erhöhten
Temperaturen
Tubes sans soudure en acier pour service sous pression - Conditions techniques de
livraison - Partie 2 : Tubes en acier non allié et allié avec caractéristiques spécifiées à
température élevée
Ta slovenski standard je istoveten z: EN 10216-2:2013/prA1
ICS:
23.020.32 7ODþQHSRVRGH Pressure vessels
77.140.75 Jeklene cevi in cevni profili Steel pipes and tubes for
za posebne namene specific use
SIST EN 10216-2:2014/oprA1:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
SIST EN 10216-2:2014/oprA1:2018
SIST EN 10216-2:2014/oprA1:2018
DRAFT
EUROPEAN STANDARD
EN 10216-2:2013
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
March 2018
ICS 23.040.10; 77.140.75
English Version
Seamless steel tubes for pressure purposes - Technical
delivery conditions - Part 2: Non-alloy and alloy steel tubes
with specified elevated temperature properties
Tubes sans soudure en acier pour service sous Nahtlose Stahlrohre für Druckbeanspruchungen -
pression - Conditions techniques de livraison - Partie 2 Technische Lieferbedingungen - Teil 2: Rohre aus
: Tubes en acier non allié et allié avec caractéristiques unlegierten und legierten Stählen mit festgelegten
spécifiées à température élevée Eigenschaften bei erhöhten Temperaturen
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ECISS/TC
110.
This draft amendment A1, if approved, will modify the European Standard EN 10216-2:2013. If this draft becomes an
amendment, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for
inclusion of this amendment into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 10216-2:2013/prA1:2018 E
worldwide for CEN national Members.
SIST EN 10216-2:2014/oprA1:2018
EN 10216-2:2013/prA1:2018 (E)
Contents Page
European foreword . 3
1 Deletion of the Introduction . 4
2 Modifications to Clause 1, “Scope” . 4
3 Modification to Clause 2 “Normative references” . 4
4 Modification to 6.3.2 “Example 2” . 4
5 Modification to 7.2.2 “The tubes shall be manufactured by a seamless process” . 4
6 Modification to 8.2.2 “Product analysis” . 4
7 Modifications to 8.3.3 “Creep rupture strength” . 4
8 Modification to 9.1, Types of inspection . 5
9 Modifications to 9.3 “Summary of inspection and verification testing” . 5
10 Modification to Annex ZA . 5
SIST EN 10216-2:2014/oprA1:2018
EN 10216
...