iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 13015:2002

(Main)

Maintenance for lifts and escalators - Rules for maintenance instructions

Maintenance for lifts and escalators - Rules for maintenance instructions

This European Standard specifies the elements necessary for the preparation of the instructions for the maintenance operations, as in 3.1, which are provided for new installed passenger lifts, goods passenger lifts, accessible goods only lifts, service lifts, escalators and passenger conveyors.
This European Standard does not cover:
a) instructions for the installation and the dismantling;
b) any legal examinations and tests based on national regulations.
Existing installations are not covered by this Standard, but it can be taken as a reference.

Instandhaltung von Aufzügen und Fahrtreppen - Regeln für Instandhaltungsanweisungen

Diese Norm legt alle Elemente für die Erstellung der Instandhaltungsanweisungen nach 3.1 fest, welche für neuinstallierte Personenaufzüge, Lastenaufzüge, betretbare Güteraufzüge, Kleingüteraufzüge, Fahrtreppen und Fahrsteige notwendig sind.
Diese Europäische Norm gilt nicht für:
a) Anweisungen für den Einbau und die Demontage;
b) gesetzliche Prüfungen und Untersuchungen auf Grund nationaler Bestimmungen.
Bestehende Anlagen werden von dieser Norm nicht abgedeckt; hierfür kann jedoch sachdienlich von dieser Norm ausgegangen werden.

Maintenance pour les ascenseurs et les escaliers mécaniques - Regles pour les instructions de maintenance

Domaine d'application
La présente Norme Européenne spécifie les éléments nécessaires à l'élaboration des instructions pour les opérations de maintenance, telle qu'elle est définie en 3.1, et qui sont fournies pour les ascenseurs, les ascenseurs de charge, les monte charge accessibles, les monte charge inaccessibles, les escaliers mécaniques et les trottoirs roulants nouvellement installés.
La présente Norme européenne ne couvre pas :
a) les instructions pour l'installation et le démantèlement ;
b) tous examens et essais réglementaires fondés sur des règlements nationaux.
Les installations existantes ne sont pas couvertes par la présente norme, mais celle-ci peut être prise en référence.

Vzdrževanje dvigal (liftov) in tekočih stopnic - Pravila za vzdrževalna navodila

General Information

Status
Withdrawn
Publication Date
30-Apr-2002
Withdrawal Date
02-Nov-2008
ICS
91.140.90 - Lifts. Escalators
Technical Committee
DTN - Lift and transport appliances
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
30-Oct-2008
Due Date
22-Nov-2008
Completion Date
03-Nov-2008
Directive
95/16/EC - European Parliament and Council Directive 95/16/EC of 29 June 1995 on the approximation of the laws of the Member States relating to lifts
98/37/EC - Machinery
Mandate
M/079 - Mandate to CEN and CENELEC for standardization in the field of machines
M/BC/CEN/92/3 - Standardization mandate assigned to CEN/CENELEC concerning Lifts
Ref Project
EN 13015:2001 - Maintenance for lifts and escalators - Rules for maintenance instructions

Relations

Replaced By
SIST EN 13015:2002+A1:2008 - Maintenance for lifts and escalators - Rules for maintenance instructions
Effective Date
01-Dec-2008
Consolidated By
SIST EN 13015:2002+A1:2008 - Maintenance for lifts and escalators - Rules for maintenance instructions
Effective Date
18-Jan-2023

Buy Standard

EN 13015:2002EN 13015:2002
PreviousNext
Standard
EN 13015:2002
English language
20 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Maintenance for lifts and escalators - Rules for maintenance instructionsMaintenance pour les ascenseurs et les escaliers mécaniques - Regles pour les instructions de maintenanceInstandhaltung von Aufzügen und Fahrtreppen - Regeln für InstandhaltungsanweisungenTa slovenski standard je istoveten z:EN 13015:2001SIST EN 13015:2002en91.140.90Lifts. EscalatorsICS:SLOVENSKI
STANDARDSIST EN 13015:200201-maj-2002

EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13015September 2001ICS 91.140.90English versionMaintenance for lifts and escalators - Rules for maintenanceinstructionsMaintenance pour les ascenseurs et les escaliersmécaniques - Règles pour les instructions de maintenanceInstandhaltung von Aufzügen und Fahrtreppen - Regeln fürInstandhaltungsanweisungenThis European Standard was approved by CEN on 21 June 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2001 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13015:2001 E

Introduction.31
Scope.32
Normative references.33
Definitions.44
Elaboration of maintenance instructions.54.1 General.54.2
Elements to be taken into account for the maintenance instructions.64.3
Information to be included in the maintenance instructions.64.3.1
General.64.3.2
Information to the owner of the installation.64.3.3
Information for the maintenance organisation.95
Risk assessment.105.1 General.105.2 Information for the maintenance organisation.116
Information to the owner for lift rescue operations.117
Markings, signs, pictograms and written warnings.118
Format of the maintenance instruction handbook.12Annex A (informative)
Typical examples of checks to be taken into account in maintenance instructions.13Annex B (informative)
Examples of elements to be taken into account in risk assessment for maintenanceoperations.17Annex ZA
(informative)
Relationship of this document with EC directives.19Bibliography.20

IntroductionThis European Standard is a type C standard as stated in EN 1070.Only correct and preventative maintenance performed by a competent maintenance person in conformity with themaintenance instructions can ensure the safe and intended functioning of an installation.In this Standard it is assumed that the installation to be maintained has been legally placed on the market.1
ScopeThis European Standard specifies the elements necessary for the preparation of the instructions for themaintenance operations, as in 3.1, which are provided for new installed passenger lifts, goods passenger lifts,accessible goods only lifts, service lifts, escalators and passenger conveyors.This European Standard does not cover:a) instructions for the installation and the dismantling;b) any legal examinations and tests based on national regulations.Existing installations are not covered by this Standard, but it can be taken as a reference.2
Normative referencesThis European Standard incorporates by dated or undated reference provisions from other publications. Thesenormative references are cited at the appropriate places in the text, and the publications are listed hereafter. Fordated references, subsequent amendments to or revisions of any of these publications apply to this EuropeanStandard only when incorporated in it by amendment or revision. For undated references, the latest edition of thepublication referred to applies (including amendments).EN 81-1, Safety rules for the construction and installation of lifts - Part 1: Electric liftsEN 81-2, Safety rules for the construction and installation of lifts - Part 2: Hydraulic liftsEN 81-3, Safety rules for the construction and installation of lifts - Part 3: Electric and hydraulic service liftsprEN 81-5, Safety rules for the construction and installation of lifts - Part 5: Screw lifts

DefinitionsFor the purposes of this Eurpean Standard, the definitions in EN 81-1, EN 81-2, EN 81-3, prEN 81-5, prEN 81-6,prEN 81-7, prEN 81-28, EN 115, EN 1050 and the following apply:3.1maintenanceall the necessary operations to ensure the safe and intended functioning of the installation and its components afterthe completion of the installation and throughout its life cycle.Maintenance includes:a)lubrication, cleaning, etc.;However, the following cleaning operations can be not considered as maintenance :1) cleaning of the external parts of the well;2) cleaning of the external parts of the escalator or passenger conveyor;3) cleaning of the inside of the car.b)checks;c)passenger rescue operations;d)the operations of setting and adjustment;e)repair or changing of components which may occur due to wear or tear and do not affect the characteristics ofthe installation.The following are not considered as maintenance operations:a)changing of a major component such as the machine, the car, the control panel, etc., or safety componentsuch as safety gear, etc., even if the characteristics of the new component are the same as the original;b)replacement of the installation;c) modernisation of the installation, including the changing of any characteristic of the installation (such as speed,load, etc.);d) rescue operations carried out by Fire Brigades3.2maintenance organisationcompany or part of company where competent maintenance person(s) carry out maintenance operations on behalfof the owner of the installation

Elaboration of maintenance instructions4.1 GeneralThe installations covered by this European Standard shall be maintained in good working order in accordance withthe installer's instructions. To this effect, regular maintenance of the installation shall be carried out, to ensure, inparticular, the safety of the installation. The safety of an installation shall take into account the ability to bemaintained without causing injury or damage to health.Regular maintenance of the installation shall be carried out to ensure the reliability of the installation.The access and the associated environment shall be maintained in good working order in accordance with theinstaller instructions.The instructions for maintenance of an installation according to the Lifts Directive shall be provided by the installer,as defined in 3.5, after completion of the installation, as a result of a risk assessment.The instructions for maintenance of the safety components of lifts shall be provided by the manufacturer to theinstaller as respectively defined in 3.4 and 3.5.The instructions for maintenance of an installation according to the Machinery Directive shall be provided by themanufacturer, as defined in 3.4, when placed on the market, and be the result of a risk assessment.In order that the aim of the maintenance instructions can be achieved, they shall be formulated so that they can beclearly and easily understood by competent maintenance persons.The competence of the maintenance person within the maintenance organisation shall be continuously updated.NOTE
The owner of the installation should be informed that the qualification of the maintenance organisation is in conformitywith the regulations applicable in the country in which the installation operates ; if no regulations exist, the qualification can be

Elements to be taken into account for the maintenance instructionsWhen preparing the content of the maintenance instructions (see 4.3, clauses 5 and 6) the following elements shallbe taken into account:a)the specifications and the intended use of the installation (type of installation, performance, type of goods to betransported, type of users, etc.);b)the environment in which the installation and its components are installed (weather conditions, vandalism,etc.);c)any restriction of use;d)the result of the risk assessment (see clause 5) for every working area and for every task to be undertaken;e)the specific maintenance instructions provided by the manufacturer of safety components;f)in case of components other than safety components, where maintenance is necessary, the maintenanceinstructions provided by the manufacturer of these components.4.3 Information to be included in the maintenance instructions4.3.1GeneralThe maintenance instructions shall contain information relati
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 81-41:2025(Main)
Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 41: Vertical lifting platforms intended for use by persons with impaired mobility
EN 81-41:2024

1.1   This draft European Standard deals with safety requirements for construction, manufacturing, installation, maintenance and dismantling of electrically powered vertical lifting platforms affixed to a building structure intended for use by persons with impaired mobility:
-   travelling vertically between predefined levels along a guided path whose inclination to the vertical does not exceed 15°;
-   intended for use by persons with or without a wheelchair;
-   supported or sustained by rack and pinion, rope traction drive, noncircular elastomeric-coated steel suspension members (hereafter called flat belt) traction drive, rope positive drive, chains, toothed belts, screw and nut, guided chain, scissors mechanism or hydraulic jack (direct or indirect);
-   with enclosed liftways;
-   with a speed not greater than 0,15 m/s;
-   with platforms where the carrier is not completely enclosed.
1.2   This draft European Standard deals with all significant hazards relevant to lifting platforms, when they are used as intended and under the conditions foreseen by the manufacturer (see Clause 4).
1.3   This draft European Standard does not specify the additional requirements for:
-   operation in severe conditions (e.g. extreme climates, strong magnetic fields);
-   lightning protection;
-   operation subject to special rules (e.g. potentially explosive atmospheres);
-   handling of materials, the nature of which could lead to dangerous situations;
-   vertical lifting platforms whose primary function is the transportation of goods;
-   vertical lifting platforms whose carriers are completely enclosed;
-   vertical lifting platforms prone to vandalism;
-   hazards occurring during manufacture;
-   earthquakes, flooding;
-   firefighting, evacuation and behaviour during a fire;
-   noise and vibrations;
-   the design of concrete, hard core, timber or other foundation or building arrangement;
-   the design of anchorage bolts to the supporting structure;
-   type C wheelchairs as defined in EN 12183 and/or EN 12184.
NOTE   For the actual type of machinery, noise is not considered a significant nor relevant hazard.
1.4   This draft European Standard is not applicable to Vertical Lifting Platforms intended for use by persons with impaired mobility which are manufactured before the date of its publication as an EN.

  • Standard
    111 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 81-31:2025(Main)
Safety rules for the construction and installation of lifts - Lifts for the transport of goods only - Part 31: Accessible goods only lifts
EN 81-31:2024

1.1   This document specifies the safety rules for new accessible goods only lifts with traction, positive or hydraulic drive, permanently installed and only used by users (see 3.57), serving fixed and permanent landing levels, having a carrier made of a single load carrying area, designed for the transportation of goods only, moving along a fixed path by rigid guide rails and inclined not more than 15° to the vertical, with rated speed not exceeding 1 m/s.
This document covers accessible goods only lifts with rated load exceeding 300 kg and not intended to transport persons.
1.2   For the purpose of this document, a goods only lift carrier is regarded as accessible where one of the following conditions is satisfied:
a)   floor area of the carrier is greater than 1,0 m2;
b)   depth of the carrier is greater than 1,0 m;
c)   clear height of the carrier is greater than 1,20 m.
In case the carrier is without a roof, it is considered accessible when the clear height of the landing doors is greater than 1,20 m.
1.3   Two types of accessible goods only lifts are addressed:
a)   Type A, where the intended use is bound to the maximum rated speed of 0,30 m/s;
b)   Type B, where the intended use is bound to the maximum rated speed of 1,0 m/s.
1.4   In addition to the requirements of this document, supplementary requirements are to be considered in special cases (operation subject to ATEX rules, operational in ambiental condition not addressed by this standard, seismic conditions, transporting dangerous goods, etc.).
1.5   This document does not cover:
a)   accessible goods only lifts:
1)   with more than one lift machine;
i)   where loading and unloading is automated, or the carrier floor is fitted with mobile devices (e.g. rollers) for loading and unloading purposes;
ii)   intended to carry bulk loads (such as loose sand, gravel, etc.);
iii)   with drive systems other than those stated in 4.8;
b)   lifting tables according to EN 1570-1 and EN 1570-2;
c)   lifting appliances, such as appliances with more than one carrier, skips, goods only lifts for construction sites, for underground applications, mine winding gear, goods only lifts on seagoing vessels and mobile offshore units, construction and maintenance appliances in wind turbines, goods only lifts specially designed and constructed for research purposes for temporary use in laboratories, goods only lifts specially designed and constructed for military or police purposes;
d)   safety during operation of transport, erection, repairs and dismantling of accessible goods only lifts;
e)   the use of translucent material for the walls of the well and machinery spaces, for the carrier with the exception of the landing doors vision panels;
f)   the use of programmable electronic systems in safety related applications for lifts (PESSRAL);
g)   hydraulic lifts where the setting of the pressure relief valve exceeds 50 MPa;
h)   any form of radiation except EMC;
i)   fire propagation;
j)   energy dissipation type buffers;
k)   the possibility of two simultaneous acts of imprudence and/or the abuse of instructions for use.
l)   ambient temperature in the well and machinery spaces lower than +5 °C and higher than +40 °C;
m)   health and safety of animals.
However, this document can usefully be taken as a basis.
Noise and vibrations are not dealt with in this document as they are not considered a significant nor relevant hazard for the actual type of the accessible goods only lifts.
1.6   The requirements of this document are such that the possibility of a failure of an electric safety device or a safety component complying with all the requirements of this document needs not to be taken into consideration.
1.7   This document is not applicable to accessible goods only lifts which were manufactured before the date of its publication as EN.

  • Standard
    195 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 81-43:2025(Main)
Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 43: Lifts for cranes
EN 81-43:2025

1.1   This document specifies the safety requirements for the construction and installation of power operated lifts attached to cranes and intended for access to workplaces on cranes. The lift serves defined landing levels and has a car which is:
a)   designed for the transportation of persons and goods;
b)   guided;
c)   travelling vertically or along a path within 15 degrees maximum from the vertical;
d)   supported by rack and pinion or suspended by steel wire ropes;
e)   travelling with a speed not more than 1,0 m/s for permanent installed lifts and not more than 0,4 m/s for temporarily installed lifts.
1.2   This document identifies hazards as listed in Annex A that arise during the various phases in the life of such equipment and describes methods for the elimination or reduction of these hazards when used as intended by the manufacturer.
This document deals with significant hazards, hazardous situations and events relevant to lifts for cranes, when it is used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer. This document specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards (see Annex A).
1.3   This document does not specify requirements for:
a)   noise;
b)   lighting;
c)   potentially explosive atmospheres;
NOTE   Directive 2014/34/EU concerning equipment and protective systems intended for use in potentially explosive atmospheres can be applicable to the type of machine or equipment covered by this document. The present standard is not intended to provide means of complying with the essential health and safety requirements of Directive 2014/34/EU.
d)   electromagnetic compatibility (emission, immunity);
e)   handling of loads the nature of which could lead to dangerous situations (e.g. molten metal, acids/bases, radiating materials, fragile loads);
f)   the use of combustion engines;
g)   hydraulic drive units.
1.4   This document is not applicable to:
a)   builders hoists according to EN 12158 1:2021, EN 12158 2:2000+A1:2010 and EN 12159:2012 and transport platforms according to EN 16719:2018;
b)   elevating control stations according to EN 14502 2:2005+A1:2008;
c)   lifts according to EN 81 20:2020.
1.5   This document deals with the complete lift design but excludes the design of the crane. It includes the base frame and base enclosure of the lift but excludes the design of any concrete, hard core, timber or other foundation arrangement. It includes the design of mast ties and the design of anchorage parts between the mast tie and the crane structure. This document also includes the design of the landing gates and their fixings.
1.6   This document does not apply to lifts for cranes manufactured before the date of publication of this document by CEN.

  • Standard
    77 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 81-44:2025(Main)
Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 44: Lifting appliances in wind turbines
EN 81-44:2024

1.1   This document specifies the safety requirements for the construction and installation of power operated lifting appliances installed permanently for indoor or outdoor service in wind turbines and intended for access to workplaces on wind turbines, including rescue and evacuation procedures. A lifting appliance serves defined landing levels and can move persons to working positions where they are carrying out work (which could be from the carrier) and has a carrier which is:
a)   designed for the transportation of persons and goods;
b)   guided;
c)   travelling vertically or along a path within 15° maximum from the vertical;
d)   supported or sustained by rack and pinion or rope traction drive;
e)   travelling with a speed not more than 0,7 m/s;
f)   able to operate in a temperature range between - 25 °C to + 55 °C.
1.2   This document does not cover hazards related to:
a)   noise;
b)   the use of the lifting appliance for erection or dismantling of the wind turbine;
c)   lightning protection;
d)   use in potentially explosive atmospheres;
e)   electromagnetic compatibility (emission, immunity);
f)   transporting of goods outside the carrier;
g)   the use of combustion engines;
h)   hydraulic and pneumatic drive units;
i)   the use of lifting appliances in floating wind turbines;
j)   use during earthquakes.
1.3   This document is not applicable to lifting appliances manufactured before the date of its publication.

  • Standard
    112 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12159:2025(Main)
Builders hoists for persons and materials with vertically guided cages
EN 12159:2024

1.1   This document specifies power operated temporarily installed builders’ hoists (referred to as “hoists” in this document) intended for use by persons who are permitted to enter sites of engineering and construction, serving landing levels, having a cage:
-   designed for the transportation of persons or of persons and materials;
-   guided;
-   travelling vertically or along a path within 15° max. of the vertical;
-   supported or sustained by rack and pinion;
-   designed with and / or without support from separate structure.
1.2   This document specifies the significant hazards, hazardous situations or hazardous events relevant to the machine as listed in Annex C which arise during the various phases in the life of the machine and describes methods for the elimination or reduction of these hazards when it is used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer.
1.3   This document does not specify the additional requirements for:
-   operation in severe conditions (e.g. extreme climates, strong magnetic fields);
-   lightning protection;
-   operation subject to special rules (e.g. potentially explosive atmospheres);
-   electromagnetic compatibility (emission, immunity);
-   handling of loads the nature of which could lead to dangerous situations (e.g. molten metal, acids/bases, radiating materials, fragile loads);
-   the use of combustion engines;
-   the use of remote controls;
-   hazards occurring during manufacture;
-   hazards occurring as a result of mobility;
-   hazards occurring as a result of being erected over a public road;
-   earthquakes;
-   emission of airborne noise;
-   dual (twin) cage hoists;
-   twin masts hoists;
-   combination hoists, e.g. an EN 12159 hoist with an EN 12158-1 hoist;
-   counterweighted hoists, neither by separate counterweight nor counterweighted by another cage.
1.4   This document does not apply to:
-   builders’ hoists for the transport of goods only EN 12158-1:2021 and EN 12158-2:2000+A1:2010;
-   lifts according to EN 81-20:2020, EN 81-3:2000+A1:2008 and EN 81-43:2009;
-   work cages suspended from lifting appliances;
-   work platforms carried on the forks of fork trucks;
-   work platforms according to EN 1495:1997+A2:2009  ;
-   transport platforms according to EN 16719:2018;
-   funiculars;
-   lifts specially designed for military purposes;
-   mine lifts;
-   theatre elevators;
-   hoists with hydraulic drive/braking systems and hydraulic safety devices.
1.5   This document specifies the hoist installation. It includes the base frame and base enclosure but excludes the design of any concrete, hard core, timber or other foundation arrangement. It includes the design of mast ties but excludes the design of anchor bolts to the supporting structure. It includes the landing gates and their frames but excludes the design of any anchorage fixing bolts to the supporting structure.
1.6   This document does not apply to builders’ hoists for persons and material with vertically guided cages which are manufactured before the date of publication of this document by CEN.

  • Standard
    68 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 25745-2:2015/A1:2024(Amendment)
Energy performance of lifts, escalators and moving walks - Part 2: Energy calculation and classification for lifts (elevators) - Amendment 1: Express zones (ISO 25745- 2:2015/Amd 1:2023)
EN ISO 25745-2:2015/A1:2023
  • Amendment
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 25745-1:2023(Main)
Energy performance of lifts, escalators and moving walks - Part 1: Energy measurement and verification (ISO 25745-1:2023)
EN ISO 25745-1:2023

This document specifies:
a)       methods of measuring actual energy consumption of lifts, escalators and moving walks on a single unit basis;
b)       methods of carrying out periodic energy verification checks on lifts, escalators and moving walks in operation.
This document only considers the energy performance during the operational portion of the life cycle of the lifts, escalators or moving walks.
For lifts, this document does not cover energy aspects, such as:
a)       hoistway lighting;
b)       heating and cooling equipment, including fans in the lift car;
c)        machine room lighting;
d)       machine room heating, ventilation and air conditioning;
e)       non-lift, display systems, closed circuit television security cameras, etc.;
f)         non-lift, monitoring systems (building management systems, etc.);
g)       the effect of lift group dispatching on energy consumption;
h)       non-lift equipment consumption through the power sockets;
i)         energy storage systems if used as an alternative energy source for operation.
For escalators and moving walks, this document does not cover energy aspects of the ancillary equipment, such as:
a)       lighting with the exception of comb plate lighting and step gap lighting and traffic light;
b)       cooling and heating;
c)        alarm devices and emergency battery supplies equipment, etc.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 81-77:2022(Main)
Safety rules for the construction and installations of lifts - Particular applications for passenger and goods passenger lifts - Part 77: Lifts subject to seismic conditions
EN 81-77:2022

This document specifies the additional special provisions and safety rules for passenger and goods passenger lifts where these lifts are installed in buildings and constructions (hereinafter buildings) intended to withstand seismic events in compliance with EN 1998-1:2004 (Eurocode 8), during use, maintenance, inspection and emergency operation of lifts.
The aim of this document is to:
-   avoid loss of life and reduce the extent of injuries;
-   avoid people getting trapped in the lift;
-   avoid damage;
-   avoid environmental problems related to oil leakage;
-   reduce the number of lifts out of service.
This document does not introduce any specific provisions and safety rules for lifts when ad ≤ 1 m/s2 as defined in Annex A.
This document does not address other risks due to seismic events (e.g. fire, flood, explosion).
This document is not applicable to lifts installed before the date of its publication.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 81-70:2021+A1:2022(Main)
Safety rules for the construction and installation of lifts - Particular applications for passenger and goods passenger lift - Part 70: Accessibility to lifts for persons including persons with disability
EN 81-70:2021+A1:2022

This document specifies the minimum requirements for the safe and independent access and use of lifts by persons, including persons with disabilities. It covers the needs of persons with disabilities according to Annex A.
NOTE For guidance on solutions for increased accessibility and usability, see Annex D

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 81-71:2022(Main)
Safety rules for the construction and installation of lifts - Particular applications to passenger lifts and goods passenger lifts - Part 71: Vandal resistant lifts
EN 81-71:2022

This document defines requirements addressing the significant hazards related to lifts, which are subject to different expected levels of vandalism (see Annex A and Annex D for further information).
Those requirements are supplementary (additional and/or modified) to the requirements of EN 81-20:2020, intended to mitigate the effect of vandalism.
This document is not applicable to lifts installed before the date of its publication.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day