SIST EN ISO 17871:2020/A1:2024

SLOVENSKI STANDARD
01-oktober-2024
Plinske jeklenke - Ventili jeklenk za hitro razbremenitev - Specifikacija in preskus
tipa - Dopolnilo A1 (ISO 17871:2020/Amd 1:2024)
Gas cylinders - Quick-release cylinder valves - Specification and type testing -
Amendment 1 (ISO 17871:2020/Amd 1:2024)
Gasflaschen - Schnellöffnungs-Flaschenventile - Spezifikation und Baumusterprüfung -
Änderung 1 (ISO 17871:2020/Amd 1:2024)
Bouteilles à gaz - Robinets de bouteilles à ouverture rapide - Spécifications et essais de
type - Amendement 1 (ISO 17871:2020/Amd 1:2024)
Ta slovenski standard je istoveten z: EN ISO 17871:2020/A1:2024
ICS:
23.020.35 Plinske jeklenke Gas cylinders
23.060.40 Tlačni regulatorji Pressure regulators
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 17871:2020/A1
EUROPEAN STANDARD
NORME EUROPÉENNE
April 2024
EUROPÄISCHE NORM
ICS 23.020.35
English Version
Gas cylinders - Quick-release cylinder valves -
Specification and type testing - Amendment 1 (ISO
17871:2020/Amd 1:2024)
Bouteilles à gaz - Robinets de bouteilles à ouverture Gasflaschen - Schnellöffnungs-Flaschenventile -
rapide - Spécifications et essais de type - Amendement Spezifikation und Baumusterprüfung - Änderung 1
1 (ISO 17871:2020/Amd 1:2024) (ISO 17871:2020/Amd 1:2024)
This amendment A1 modifies the European Standard EN ISO 17871:2020; it was approved by CEN on 19 April 2024.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 17871:2020/A1:2024 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 17871:2020/A1:2024) has been prepared by Technical Committee ISO/TC 58
"Gas cylinders" in collaboration with Technical Committee CEN/TC 23 “Transportable gas cylinders” the
secretariat of which is held by BSI.
This Amendment to the European Standard EN ISO 17871:2020 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by October 2024,
and conflicting national standards shall be withdrawn at the latest by October 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a standardization request addressed to CEN by the European
Commission. The Standing Committee of the EFTA States subsequently approves these requests for its
Member States.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 17871:2020/Amd 1:2024 has been approved by CEN as EN ISO 17871:2020/A1:2024
without any modification.
International
Standard
ISO 17871
Second edition
Gas cylinders — Quick-release
2020-07
cylinder valves — Specification and
type testing
AMENDMENT 1
2024-04
AMENDMENT 1
Bouteilles à gaz — Robinets de bouteilles à ouverture rapide —
Spécifications et essais de type
AMENDEMENT 1
Reference number
ISO 17871:2020/Amd.1:2024(en) © ISO 2024

ISO 17871:2020/Amd.1:2024(en)
© ISO 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
ISO 17871:2020/Amd.1:2024(en)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types
of ISO document should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document
...