SIST EN 2713-003:2006
(Main)Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between - 55 °C and 200 °C - Part 003: Screened (spiral) and jacketed, ink jet printable - Product standard
Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between - 55 °C and 200 °C - Part 003: Screened (spiral) and jacketed, ink jet printable - Product standard
This standard specifies the characteristics of ink jet printable single and multicore screened (spiral) and jacketed electrical cables for use in the on-board electrical systems of aircraft, at operating temperatures between - 55 °C and 200 °C.
It shall also be possible to mark these cables by hot stamp printing.
These markings shall be in accordance with EN 3838.
Luft- und Raumfahrt - Leitungen, elektrisch, ein- und mehradrig, für allgemeine Verwendung - Betriebstemperaturen zwischen - 55 °C und 200 °C - Teil 003: Geschirmt (Umseilung) und ummantelt, Tintenstrahl bedruckbar - Produktnorm
Das Dokument legt die Eigenschaften von elektrischen, Tintenstrahl-bedruckbaren, ein- und mehradrigen, geschirmten (Umseilung) und ummantelten Leitungen fest, die zur Verwendung in Bordnetzen von Luftfahrzeugen bei Betriebstemperaturen zwischen -55 °C und 200 °C bestimmt sind.
Es muss auch möglich sein, diese Leitungen mittels Heißprägung zu kennzeichnen.
Diese Kennzeichnungen müssen EN 3838 entsprechen.
Série aérospatiale - Câbles, électriques, mono et multiconducteurs d'usage général - Températures de fonctionnement comprises entre - 55 °C et 200 °C - Partie 003 : Blindés (guipés) et gainés, marquables au jet d'encre - Norme de produit
Aeronavtika – Eno- ali večžilni električni kabli za splošno uporabo – Delovne temperature med –55 °C in 200 °C – 003. del: Oklopljeni (spirala) in oplaščeni, z možnostjo brizganega tiskanja – Standard za proizvod
General Information
- Status
- Published
- Publication Date
- 31-Aug-2006
- Technical Committee
- I13 - Imaginarni 13
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 01-Sep-2006
- Due Date
- 01-Sep-2006
- Completion Date
- 01-Sep-2006
Overview
EN 2713-003:2005 is a CEN aerospace product standard for screened (spiral) and jacketed, ink-jet printable electrical cables intended for on‑board aircraft electrical systems. It covers single- and multi‑core cables designed to operate between −55 °C and 200 °C, and defines construction, materials, marking, testing and quality requirements for cables that must accept ink‑jet and hot‑stamp identification in accordance with EN 3838.
Key topics and technical requirements
- Scope and use: Single- and multi‑core (1 to 4 cores) cables for general purpose aircraft installations; filler cores are not permitted.
- Conductor and insulation: Cores comply with EN 2266-003; core top coat uses a dispersion fluorocarbon for ink‑jet compatibility.
- Screen: Nickel‑plated copper stranded spiral screen (dimensions referenced in the standard).
- Outer jacket: Polyimide jacket with nominal total wall thickness 30 µm, coated both sides with 2.5 µm fluorocarbon; a dispersion fluorocarbon top coat (≥15 µm) ensures ink‑jet marking acceptance. Winding/overlap options and acceptable overlaps are specified.
- Marking: Must be ink‑jet printable and also markable by hot stamp; markings to follow EN 3838 requirements for user‑applied cable identification.
- Required tests and performance: Test procedures reference EN 3475‑100 series and EN 2235. Key test requirements include:
- Electrical resistance per unit length and voltage/insulation tests
- Accelerated ageing and delamination/shrinkage (250 ± 5 °C for certain tests)
- Thermal endurance: 40 000 h at 200 °C
- Flammability: extinguishing time ≤ 3 s
- Notch propagation, plating continuity/thickness and adherence
- Specific mechanical and environmental tests as listed in Table 2 of the standard
- Designation and identification: Standard provides example designation format (e.g., “CABLE, ELECTRICAL EN2713-003 B 002 F”) and references EN 2713‑002 for colour coding and marking rules.
Applications and users
- Where used: Selection and procurement of on‑board aircraft wiring where high temperature endurance, electromagnetic screening and permanent legible marking are required (avionics wiring, harnesses, control circuits).
- Who uses it: Aerospace cable manufacturers, design engineers, procurement teams, quality/inspection personnel, harness assemblers, and certification/test laboratories involved in aircraft electrical systems.
Related standards
- EN 2266-003 - cores and top coat requirements
- EN 2235 - screened and jacketed cables technical specification and delivery rules
- EN 3475-100 series - test methods for aircraft electrical cables
- EN 3838 - requirements/tests for user‑applied cable markings
- EN 2083 - copper conductor product standard
- EN 3042 - quality assurance guidance for aerospace standard parts
This standard is essential when specifying or manufacturing aerospace screened, jacketed, ink‑jet printable cables that must meet high‑temperature, screening and marking performance for aircraft on‑board electrical systems.
Frequently Asked Questions
SIST EN 2713-003:2006 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between - 55 °C and 200 °C - Part 003: Screened (spiral) and jacketed, ink jet printable - Product standard". This standard covers: This standard specifies the characteristics of ink jet printable single and multicore screened (spiral) and jacketed electrical cables for use in the on-board electrical systems of aircraft, at operating temperatures between - 55 °C and 200 °C. It shall also be possible to mark these cables by hot stamp printing. These markings shall be in accordance with EN 3838.
This standard specifies the characteristics of ink jet printable single and multicore screened (spiral) and jacketed electrical cables for use in the on-board electrical systems of aircraft, at operating temperatures between - 55 °C and 200 °C. It shall also be possible to mark these cables by hot stamp printing. These markings shall be in accordance with EN 3838.
SIST EN 2713-003:2006 is classified under the following ICS (International Classification for Standards) categories: 49.060 - Aerospace electric equipment and systems. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 2713-003:2006 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2006
$HURQDYWLND±(QRDOLYHþåLOQLHOHNWULþQLNDEOL]DVSORãQRXSRUDER±'HORYQH
WHPSHUDWXUHPHG±ƒ&LQƒ&±GHO 2NORSOMHQL VSLUDOD LQRSODãþHQL]
PRåQRVWMREUL]JDQHJDWLVNDQMD±6WDQGDUG]DSURL]YRG
Aerospace series - Cables, electrical, single and multicore for general purpose -
Operating temperatures between - 55 °C and 200 °C - Part 003: Screened (spiral) and
jacketed, ink jet printable - Product standard
Luft- und Raumfahrt - Leitungen, elektrisch, ein- und mehradrig, für allgemeine
Verwendung - Betriebstemperaturen zwischen - 55 °C und 200 °C - Teil 003: Geschirmt
(Umseilung) und ummantelt, Tintenstrahl bedruckbar - Produktnorm
Série aérospatiale - Câbles, électriques, mono et multiconducteurs d'usage général -
Températures de fonctionnement comprises entre - 55 °C et 200 °C - Partie 003 :
Blindés (guipés) et gainés, marquables au jet d'encre - Norme de produit
Ta slovenski standard je istoveten z: EN 2713-003:2005
ICS:
49.060
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN 2713-003
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2005
ICS 49.060
English Version
Aerospace series - Cables, electrical, single and multicore for
general purpose - Operating temperatures between - 55 °C and
200 °C - Part 003: Screened (spiral) and jacketed, ink jet
printable - Product standard
Série aérospatiale - Câbles, électriques, mono et Luft- und Raumfahrt - Leitungen, elektrisch, ein- und
multiconducteurs d'usage général - Températures de mehradrig, für allgemeine Verwendung -
fonctionnement comprises entre - 55 °C et 200 °C - Partie Betriebstemperaturen zwischen - 55 °C und 200 °C - Teil
003 : Blindés (guipés) et gainés, marquables au jet d'encre 003: Geschirmt (Umseilung) und ummantelt, Tintenstrahl
- Norme de produit bedruckbar - Produktnorm
This European Standard was approved by CEN on 28 October 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 2713-003:2005: E
worldwide for CEN national Members.
Contents Page
Foreword .3
1 Scope .4
2 Normative references .4
3 Definitions and symbols.4
4 Materials and construction.4
5 Required characteristics .6
6 Quality assurance .7
7 Designation .8
8 Identification and marking.8
9 Packaging, labelling and delivery lengths .8
10 Technical specification.8
Foreword
This European Standard (EN 2713-003:2005) has been prepared by the European Association of Aerospace
Manufacturers - Standardization (AECMA-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has re-
ceived the approval of the National Associations and the Official Services of the member countries of AECMA,
prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by June 2006, and conflicting national standards shall be withdrawn at
the latest by June 2006.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Den-
mark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxem-
bourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and the
United Kingdom.
1 Scope
This standard specifies the characteristics of ink jet printable single and multicore screened (spiral) and jacketed
electrical cables for use in the on-board electrical systems of aircraft, at operating temperatures between − 55 °C
and 200 °C.
It shall also be possible to mark these cables by hot stamp printing.
These markings shall be in accordance with EN 3838.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated refer-
ences, only the edition cited applies. For undated references, the latest edition of the referenced document
(including any amendments) applies.
EN 2083, Aerospace series — Copper and copper alloy conductors for electrical cables — Product standard
EN 2235, Ae
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...