SIST EN 13299:2002
(Main)Fertilizers - Determination of flow rate
Fertilizers - Determination of flow rate
This European Standard specifies a method for the determination of the flow rate of free flowing solid fertilizers. The method is not applicable to powder materials (< 0,5 mm) or liming materials.
Düngemittel - Bestimmung der Fließkennzahl
Diese Europäische Norm legt ein Verfahren zur Bestimmung der Fließkennzahl frei fließender fester Düngemittel fest. Das Verfahren gilt nicht für Substanzen in Pulverform (<0,5mm) oder Ca/Mg-Bodenverbesserungsmittel.
Engrais - Détermination du taux d'écoulement
La présente norme européenne fixe une méthode de détermination du taux d'écoulement des engrais solides à écoulement fluide. Cette méthode n'est applicable ni aux produits en poudre (< 0,5 mm) ni aux amendements calciques et/ou magnésiens.
Gnojila - Določevanje hitrosti (stopnje) pretoka
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Düngemittel - Bestimmung der FließkennzahlEngrais - Détermination du taux d'écoulementFertilizers - Determination of flow rate65.080GnojilaFertilizersICS:Ta slovenski standard je isto
...
This May Also Interest You
This document is applicable to the sampling of the following solid inorganic fertilizers and liming materials supplied or ready for supply, and stored in static heaps:
- Single nutrient fertilizers,
- Uniform complex fertilizers,
- Milled, granulated or dredged liming materials,
- Any other materials deemed suitable for sampling by the method described in this part of the standard,
for the purpose of testing for compliance with legal requirements and other descriptions and declarations.
NOTE 1 The term “fertilizer” is used throughout the body of this document and includes liming materials and inhibitors unless otherwise indicated.
NOTE 2 Manufacturers, importers and sellers might choose to use this method to obtain samples of other products or blends as well as long as both parties to a transaction agree. The build-up of a static heap often leads to granulometric segregation, which makes the collection of a truly representative sample unlikely.
NOTE 3 It is the responsibility of manufacturers, importers and sellers, however, to ensure they supply a product that complies with its label declaration at the moment of delivery and fulfils the expectations of the end user at the moment of application.
- Standard17 pagesEnglish languagesale 10% offe-Library read for×1 day
- 02-Nov-2023
- 04-Feb-2025
- 65.080
- 2019/1009
- M/564
- M/564 AMD 1
- M/564 AMD 2
- KAT
This document specifies sampling plans and methods of representative sampling of inorganic fertilizers, liming materials and inhibitors for physical and chemical analysis, from packages and containers up to and including 1 000 kg, in liquid and solid form. This document covers sampling of products in bulk only while in motion.
NOTE 1 The sampling of bulk heaps of specified types of fertilizers is covered in prEN 1482 3. Sampling for detection of microbial presence is covered by prEN 1482 4.
NOTE 2 The term product is used throughout the body of this document and is understood to include inorganic fertilizers, liming materials and inhibitors unless otherwise indicated.
It is applicable to the sampling of batches of fertilizer, liming material and inhibitors supplied or ready for supply to third parties, as such, or in smaller batches, each of which would be subject to local, national or regional legislation.
This document does not cover complete, statistical sampling plans.
This document is also applicable to the blends of products where inorganic fertilizers, liming materials, or inhibitors are the main part of the blend in quantity. If fertilizers, liming materials, or inhibitors are not the main part of the blend, the European Standard for the main part of the blend applies. In case a blend of fertilizing products is composed of parts in equal quantity, the user decides which standard to apply. Special care is needed to ensure that the blend is/stays homogeneous and well mixed when sampled.
NOTE 3 It is the responsibility of manufacturers, importers and sellers, however, to ensure they supply a product that complies with its label declaration at the moment of delivery and fulfils the expectations of the end user at the moment of application.
- Standard56 pagesEnglish languagesale 10% offe-Library read for×1 day
- 02-Nov-2023
- 27-Jan-2025
- 65.080
- 2019/1009
- M/564
- M/564 AMD 1
- M/564 AMD 2
- KAT
This document specifies methods for the reduction and preparation of samples of fertilizers, liming materials, inhibitors and blends and sets out the requirements for sample preparation reports. It also specifies methods for the preparation of test samples and test portions from laboratory samples of fertilizer for subsequent chemical or physical analysis. It does not cover the preparation of samples for certain physical tests which require test portions of more than 2 kg.
NOTE 1 The term “fertilizer” is used throughout the body of this document and is understood to include liming materials and inhibitors unless otherwise indicated.
NOTE 2 In relation to the procedures set out in this part of the standard any special procedures specific to a particular test method will be set out in that method standard.
- Standard12 pagesEnglish languagesale 10% offe-Library read for×1 day
- 02-Nov-2023
- 27-Jan-2025
- 65.080
- 2019/1009
- M/564
- M/564 AMD 1
- M/564 AMD 2
- KAT
This document specifies a horizontal method for the enumeration of yeasts and moulds present in plant biostimulants intended for use in agriculture, by means of the colony count technique after aerobic incubation at 25 °C ± 2,5 °C.
This document allows the enumeration of yeasts and moulds, in technical and formulated plant biostimulants, both in liquid and solid states. The method is applicable to microbial plant biostimulants except those composed of fungi or yeasts.
If necessary, yeasts and moulds enumerated can be identified using suitable identification tests.
This document is applicable to the blends of fertilizing products where a blend is a mix of at least two of the following component EU fertilising products categories: Fertilizers, Liming Materials, Soil Improvers, Growing Media, Plant Biostimulants, and where the following category Plant Biostimulants is the highest % in the blend by mass or volume, or in the case of liquid form by dry mass. If Plant Biostimulants is not the highest % in the blend, the European Standard for the highest % of the blend applies. In case a blend of fertilizing products is composed of components in equal quantity or in case the component EU fertilising products used for the blend have identical formulations , the user decides which standard to apply.
- Standard20 pagesEnglish languagesale 10% offe-Library read for×1 day
This document specifies a horizontal method for the detection of enteropathogenic Vibrio species (spp.), which causes human illness in or via the intestinal tract. The species detectable by the methods specified include Vibrio parahaemolyticus, Vibrio cholerae and Vibrio vulnificus.
It is applicable to the microbial plant biostimulants.
NOTE 1 The World Health Organization (WHO) has identified that V. parahaemolyticus, V. cholerae and V. vulnificus are the major contaminants of Vibrio spp. [2].
NOTE 2 For confirmation, it is possible to use PCR (Polymerase Chain Reaction) tests; in this case a validation is carried out by the laboratory for the procedure and data generated.
This document is applicable to the blends of fertilizing products where a blend is a mix of at least two of the following component EU fertilising products categories: Fertilizers, Liming Materials, Soil Improvers, Growing Media, Plant Biostimulants, and where the following category Plant Biostimulants is the highest % in the blend by mass or volume, or in the case of liquid form by dry mass. If Plant Biostimulants is not the highest % in the blend, the European Standard for the highest % of the blend applies. In case a blend of fertilizing products is composed of components in equal quantity or in case the component EU fertilising products used for the blend have identical formulations , the user decides which standard to apply.
- Standard40 pagesEnglish languagesale 10% offe-Library read for×1 day
This document specifies general rules for the aerobic preparation of the initial suspension and of dilutions for microbiological examinations of microbial plant biostimulants.
This horizontal method might not be applicable in very detail for certain products. In this case, different methods which are specific to these products can be used if necessary, for justified technical reasons.
This document is applicable to the blends of fertilizing products where a blend is a mix of at least two of the following component EU fertilising products categories: Fertilizers, Liming Materials, Soil Improvers, Growing Media, Plant Biostimulant and where the following category Plant Biostimulants is the highest % in the blend by mass or volume, or in the case of liquid form by dry mass. If Plant Biostimulants is not the highest % in the blend, the European Standard for the highest % of the blend applies. In case a blend of fertilizing products is composed of components in equal quantity or in case the component EU fertilising products used for the blend have identical formulations , the user decides which standard to apply.
- Standard17 pagesEnglish languagesale 10% offe-Library read for×1 day
- 02-Jun-2023
- 07-Jan-2025
- 65.080
- 2019/1009
- M/564
- M/564 AMD 1
- KAT
This document was developed to provide the methodology for the enumeration and determination of Azotobacter spp. [2] [3] in microbial plant biostimulants in accordance with the Regulation (EU) 2019/1009 of the European Parliament and of the Council [1].
This document is applicable to the blends of fertilizing products where a blend is a mix of at least two of the following component EU fertilising products categories: Fertilizers, Liming Materials, Soil Improvers, Growing Media, Plant Biostimulants and where the following category Plant Biostimulants is the highest % in the blend by mass or volume, or in the case of liquid form by dry mass. If Plant Biostimulants is not the highest % in the blend, the European Standard for the highest % of the blend applies. In case a blend of fertilizing products is composed of components in equal quantity or in case the component EU fertilising products used for the blend have identical formulations , the user decides which standard to apply.
- Standard17 pagesEnglish languagesale 10% offe-Library read for×1 day
This document specifies a method for the extraction and determination of phosphonates (P-PO3) in plant biostimulants using ion chromatography and conductivity detection (IC-CD).
This document is applicable to the blends of fertilizing products where a blend is a mix of at least two of the following component EU fertilising products categories: Fertilizers, Liming Materials, Soil Improvers, Growing Media, Inhibitors, Plant Biostimulants, and where the following category Plant Biostimulants is the highest percentage in the blend by mass or volume, or in the case of liquid form by dry mass. If Plant Biostimulants is not the highest percentage in the blend, the European Standard for the highest percentage of the blend applies. In case a blend of fertilizing products is composed of components in equal quantity or in case the component EU fertilising products used for the blend have identical formulations , the user decides which standard to apply.
- Standard15 pagesEnglish languagesale 10% offe-Library read for×1 day
This document specifies a horizontal method for the enumeration of microorganisms that are able to grow and form colonies in a solid medium after anaerobic incubation at 30 °C.
The method applies to microbial plant biostimulants, except those composed of aerobic bacteria.
This method does not apply to the microbiological monitoring of the environment in which microbial plant biostimulants are manufactured.
No information about potential human pathogens can be inferred from anaerobic plate counts.
This document is applicable to the blends of fertilizing products where a blend is a mix of at least two of the following component EU fertilising products categories: Fertilizers, Liming Materials, Soil Improvers, Growing Media, Plant Biostimulants and where the following category Plant Biostimulants is the highest percentage in the blend by mass or volume, or in the case of liquid form by dry mass. If Plant Biostimulants is not the highest percentage in the blend, the European Standard for the highest percentage of the blend applies. In case a blend of fertilizing products is composed of components in equal quantity or in case the component EU fertilising products used for the blend have identical formulations , the user decides which standard to apply.
- Standard18 pagesEnglish languagesale 10% offe-Library read for×1 day
This document specifies a method for determination of the content of mercury (Hg) in plant biostimulants using (cold) vapour generation apparatus coupled to an atomic absorption spectrophotometer and a method using a direct amalgamation technique. It is applicable to aqua regia digests prepared according to EN 17701-1:2024.
NOTE It is also possible to use other suitable methods for the determination of mercury described in Annex A if users prove that the method gives the same results as the methods described in this document.
This document is applicable to the blends of fertilizing products where a blend is a mix of at least two of the following component EU fertilising products categories: Fertilizers, Liming Materials, Soil Improvers, Growing Media, Inhibitors, Plant Biostimulants, and where the following category Plant Biostimulants is the highest % in the blend by mass or volume, or in the case of liquid form by dry mass. If Plant Biostimulants is not the highest % in the blend, the European Standard for the highest % of the blend applies. In case a blend of fertilizing products is composed of components in equal quantity or in case the component EU fertilising products used for the blend have identical formulations , the user decides which standard to apply.
- Standard16 pagesEnglish languagesale 10% offe-Library read for×1 day
- 02-Jun-2023
- 07-Jan-2025
- 65.080
- 2019/1009
- M/564
- M/564 AMD 1
- KAT
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.