SIST EN ISO 13680:2004

SLOVENSKI STANDARD
01-maj-2004
Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubes
for use as casing, tubing and coupling stock - Technical delivery conditions (ISO
13680:2000)
Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubes for use
as casing, tubing and coupling stock - Technical delivery conditions (ISO 13680:2000)
Erdöl- und Erdgasindustrie - Nahtlose Rohre aus korrosionsbeständigen Legierungen zur
Verwendung als Futter- oder Steigrohre sowie Muffenvorrohre - Technische
Lieferbedingungen (ISO 13680:2000)
Industries du pétrole et du gaz naturel - Tubes sans soudure en acier allié résistant a la
corrosion utilisés comme tubes de cuvelage, tubes de production et tubes-ébauches
pour manchons - Conditions techniques de livraison (ISO 13680:2000)
Ta slovenski standard je istoveten z: EN ISO 13680:2001
ICS:
75.180.10 Oprema za raziskovanje in Exploratory and extraction
odkopavanje equipment
77.140.75 Jeklene cevi in cevni profili Steel pipes and tubes for
za posebne namene specific use
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 13680
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2001
ICS 75.180.10; 77.140.75
English version
Petroleum and natural gas industries - Corrosion-resistant alloy
seamless tubes for use as casing, tubing and coupling stock -
Technical delivery conditions (ISO 13680:2000)
Industries du pétrole et du gaz naturel - Tubes sans Erdöl- und Erdgasindustrie - Nahtlose Rohre aus
soudure en acier allié résistant à la corrosion utilisés korrosionsbeständigen Legierungen zur Verwendung als
comme tubes de cuvelage, tubes de production et tubes- Futter- oder Steigrohre sowie Muffenvorrohre - Technische
ébauches pour manchons - Conditions techniques de Lieferbedingungen (ISO 13680:2000)
livraison (ISO 13680:2000)
This European Standard was approved by CEN on 9 June 2001.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2001 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 13680:2001 E
worldwide for CEN national Members.

Foreword
The text of the International Standard from Technical Committee ISO/TC 67 "Materials, equipment and
offshore structures for petroleum and natural gas industries" of the International Organization for
Standardization (ISO) has been taken over as an European Standard by Technical Committee
CEN/TC 12 "Materials, equipment and offshore structures for petroleum and natural gas industries",
the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by May 2002, and conflicting national standards shall be
withdrawn at the latest by May 2002.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands,
Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of the International Standard ISO 13680:2000 has been approved by CEN as a European
Standard without any modification.
NOTE: Normative references to International Standards are listed in annex ZA (normative).
Annex ZA (normative)
Normative references to international publications
with their relevant European publications
This European Standard incorporates by dated or undated reference, provisions from other publications.
These normative references are cited at the appropriate places in the text and the publications are listed
hereafter. For dated references, subsequent amendments to or revisions of any of these publications
apply to this European Standard only when incorporated in it by amendment or revision. For undated
references the latest edition of the publication referred to applies (including amendments).
NOTE Where an International Publication has been modified by common modifications, indicated by
(mod.), the relevant EN/HD applies.
Publication Year Title EN Year
ISO 377 1997 Steel and steel products - Location and EN ISO 377 1997
preparation of samples and test pieces
for mechanical testing
ISO 6508-1 1999 Metallic materials - Rockwell hardness EN ISO 6508-1 1999
test - Part 1: Test method (scales A, B,
C, D, E, F, G, H, K, N, T)
ISO 7539-1 1987 Corrosion of metals and alloys - Stress EN ISO 7539-1 1995
corrosion testing - Part 1: General
guidance on testing procedures
ISO 7539-2 1989 Corrosion of metals and alloys - Stress EN ISO 7539-2 1995
corrosion testing - Part 2: Preparation
and use of bent-beam specimen
ISO 7539-3 1989 Corrosion of metals and alloys - Stress EN ISO 7539-3 1995
corrosion testing - Part 3: Preparation
and use of U-bend specimens
ISO 7539-4 1989 Corrosion of metals and alloys - Stress EN ISO 7539-4 1995
corrosion testing - Part 4: Preparation
and use of uniaxially loaded tension
specimens
ISO 7539-5 1989 Corrosion of metals and alloys - Stress EN ISO 7539-5 1995
corrosion testing - Part 5: Preparation
and use of C-ring specimens
ISO 7539-6 1989 Corrosion of metals and alloys - Stress EN ISO 7539-6 1995
corrosion testing - Part 6: Preparation
and use of pre-cracked specimens
ISO 7539-7 1989 Corrosion of metals and alloys - Stress EN ISO 7539-7 1995
corrosion testing - Part 7: Slow strain
rate testing
ISO 11960 1996 Petroleum and natural gas industries - EN ISO 11960 1998
Steel pipes for use as casing or tubing
for wells
INTERNATIONAL ISO
STANDARD 13680
First edition
2000-07-01
Petroleum and natural gas industries —
Corrosion-resistant alloy seamless tubes
for use as casing, tubing and coupling
stock — Technical delivery conditions
Industries du pétrole et du gaz naturel — Tubes sans soudure en acier allié
résistant à la corrosion utilisés comme tubes de cuvelage, tubes de
production et tubes-ébauches pour manchons — Conditions techniques de
livraison
Reference number
ISO 13680:2000(E)
©
ISO 2000
ISO 13680:2000(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not
be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this
file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this
area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters
were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event
that a problem relating to it is found, please inform the Central Secretariat at the address given below.
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic
or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body
in the country of the requester.
ISO copyright office
Case postale 56 � CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.ch
Web www.iso.ch
Printed in Switzerland
ii © ISO 2000 – All rights reserved

ISO 13680:2000(E)
Contents Page
1 Scope .1
2 Normative references .1
3 Terms and definitions, symbols and abbreviated terms .3
3.1 Terms and definitions .3
3.2 Symbols .5
3.3 Abbreviated terms .5
4 Classification.6
5 Information to be supplied by the purchaser .6
6 Material design qualification .7
7 Manufacturing process .7
7.1 Manufacturing of corrosion-resistant alloys .7
7.2 Tube manufacturing process .7
8 Requirements.8
8.1 General.8
8.2 Chemical composition .8
8.3 Mechanical properties.9
8.4 Corrosion properties .11
8.5 Microstructure properties .11
8.6 Visual inspection .11
8.7 Non-destructive examination .12
8.8 Hydrostatic test.12
9 Dimensions, masses and tolerances.13
9.1 Outside diameter, wall thickness and mass .13
9.2 Length.15
9.3 Tolerances.16
10 Inspection and testing.18
10.1 Types of inspection document.18
10.2 Type and frequency of tests.19
10.3 Purchaser inspection .20
10.4 Testing of chemical composition.20
10.5 Testing of mechanical and other characteristics.20
10.6 Inspection of dimensions .23
10.7 Visual inspection .23
10.8 Non-destructive examination (NDE) .23
10.9 Invalidation of the tests.23
10.10 Retests .23
10.11 Sorting or reprocessing .
...