SIST ES 204 915-16 V1.1.1:2008
Open Service Access (OSA) - Application Programming Interface (API) - Part 16: Service Broker SCF (Parlay 6)
General Information
- Abstract
ETSI OSA APIs Phase 4. Based on ES 203 915 and the new requirements for OSA Phase 4, to produce ES 204 915 V1.1.1. ETSI OSA Phase 4 incorporates 3GPP OSA Release 7 and is also known as Parlay 6.0. This specification describes the OSA Service Broker SCF. The present document is part 16 of the Stage 3 specification for an Application Programming Interface (API) for Open Service Access (OSA).
The OSA specifications define an architecture that enables application developers to make use of network functionality through an open standardised interface, i.e. the OSA APIs.
The present document specifies the Service Broker Service Capability Feature (SCF) aspects of the interface. All aspects of the Service Broker SCF are defined here, these being:
• Sequence Diagrams.
• Class Diagrams.
• Interface specification plus detailed method descriptions.
• State Transition diagrams.
• Data Definitions.
• IDL Description of the interfaces.
The process by which this task is accomplished is through the use of object modelling techniques described by the Unified Modelling Language (UML).
- Status
- Published
- Publication Date
- 02-Jul-2008
- Technical Committee
- SPN - Services and Protocols for Networks
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 11-Jun-2008
- Due Date
- 16-Aug-2008
- Completion Date
- 03-Jul-2008
Buy Documents
ETSI ES 204 915-16 V1.1.1 (2008-02) - Open Service Access (OSA); Application Programming Interface (API); Part 16: Service Broker SCF (Parlay 6)
ETSI ES 204 915-16 V1.1.1 (2008-05) - Open Service Access (OSA); Application Programming Interface (API); Part 16: Service Broker SCF (Parlay 6)
Overview
SIST ES 204 915-16 V1.1.1:2008 defines the standardized Application Programming Interface (API) for the Service Broker Service Capability Feature (SCF) within the Open Service Access (OSA) framework. This specification is part of the fourth phase of ETSI OSA APIs, also recognized as Parlay 6.0, and aligns with 3GPP OSA Release 7. The document is produced by SIST in collaboration with ETSI, 3GPP, and The Parlay Group, aiming to provide a unified, open interface for network service interworking and management.
The Service Broker SCF offers a flexible mechanism for applications and services to register their interest in specific service interactions within telecom networks. APIs defined herein facilitate interoperability, service brokering, and efficient traffic management for next-generation network applications.
Key Topics
- Open Service Access API Structure: OSA provides a standardized framework that allows application developers to leverage network services through well-defined interfaces.
- Service Broker SCF Functionality: The Service Broker SCF enables applications to register for and unregister from service interactions, acting as an intermediary that connects applications to network services securely and efficiently.
- Object Modelling with UML: The specification uses the Unified Modelling Language (UML) for defining interfaces, class relationships, method details, and data definitions.
- API Methods and Interfaces: The key interface,
IpServiceBroker, exposes the primary methodsregister()andunregister(), facilitating dynamic management of service interactions. - Exception Handling: Comprehensive exception classes are defined to ensure robust error handling and clear communication between applications and network entities.
- Support for Multiple Technologies: The specification includes representations in OMG IDL, W3C WSDL, and Java™ (J2SE/J2EE) for seamless integration across platforms.
Applications
The Service Broker SCF API is vital in several practical scenarios:
- Telecom Application Development: Enables service providers and third-party developers to create, register, and manage value-added services that interact directly with the telecom network.
- Service Orchestration: Supports dynamic service composition, allowing different network and application services to interwork seamlessly based on business logic and network conditions.
- High Availability and Load Sharing: Allows applications to register multiple times, supporting load balancing, active/standby configurations, and partitioned service delivery for scalability.
- Subscriber-Centric Services: Facilitates advanced network services such as call control, user interaction, multimedia messaging, and policy management through a unified interface, ensuring efficient and flexible service delivery.
- Cross-Network Compatibility: Designed to operate across GSM/UMTS (3GPP) and cdma2000 (3GPP2) networks, enabling broader interoperability and future-proofing services.
Related Standards
This standard forms part of a comprehensive suite of OSA specifications. For effective implementation and integration, consult the following related standards:
- ES 204 915-1: Open Service Access (OSA) API Overview
- ES 204 915-2: Common Data Definitions
- ES 204 915-3 to 15: Covering frameworks, call control, user interaction, mobility, messaging, connectivity management, charging, policy management, and more
- 3GPP TS 29.198-16: Equivalent 3GPP technical specification for Service Broker SCF
- Parlay 6.0 Specifications: For extended interoperability and historical context
Summary
The SIST ES 204 915-16 V1.1.1 (2008) standard is a crucial enabler for open, programmable, and interoperable telecommunications services. By defining clear API interfaces, data models, and exception handling mechanisms, it fosters innovation, flexibility, and reliability in managing and orchestrating network services across multi-vendor and multi-technology environments. This standard ensures that telecom networks remain agile and adaptable to ever-evolving service demands.
Buy Documents
ETSI ES 204 915-16 V1.1.1 (2008-02) - Open Service Access (OSA); Application Programming Interface (API); Part 16: Service Broker SCF (Parlay 6)
ETSI ES 204 915-16 V1.1.1 (2008-05) - Open Service Access (OSA); Application Programming Interface (API); Part 16: Service Broker SCF (Parlay 6)
Get Certified
Connect with accredited certification bodies for this standard
BSI Group
BSI (British Standards Institution) is the business standards company that helps organizations make excellence a habit.
NYCE
Mexican standards and certification body.
Sponsored listings
Frequently Asked Questions
SIST ES 204 915-16 V1.1.1:2008 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Open Service Access (OSA) - Application Programming Interface (API) - Part 16: Service Broker SCF (Parlay 6)". This standard covers: ETSI OSA APIs Phase 4. Based on ES 203 915 and the new requirements for OSA Phase 4, to produce ES 204 915 V1.1.1. ETSI OSA Phase 4 incorporates 3GPP OSA Release 7 and is also known as Parlay 6.0. This specification describes the OSA Service Broker SCF. The present document is part 16 of the Stage 3 specification for an Application Programming Interface (API) for Open Service Access (OSA). The OSA specifications define an architecture that enables application developers to make use of network functionality through an open standardised interface, i.e. the OSA APIs. The present document specifies the Service Broker Service Capability Feature (SCF) aspects of the interface. All aspects of the Service Broker SCF are defined here, these being: • Sequence Diagrams. • Class Diagrams. • Interface specification plus detailed method descriptions. • State Transition diagrams. • Data Definitions. • IDL Description of the interfaces. The process by which this task is accomplished is through the use of object modelling techniques described by the Unified Modelling Language (UML).
ETSI OSA APIs Phase 4. Based on ES 203 915 and the new requirements for OSA Phase 4, to produce ES 204 915 V1.1.1. ETSI OSA Phase 4 incorporates 3GPP OSA Release 7 and is also known as Parlay 6.0. This specification describes the OSA Service Broker SCF. The present document is part 16 of the Stage 3 specification for an Application Programming Interface (API) for Open Service Access (OSA). The OSA specifications define an architecture that enables application developers to make use of network functionality through an open standardised interface, i.e. the OSA APIs. The present document specifies the Service Broker Service Capability Feature (SCF) aspects of the interface. All aspects of the Service Broker SCF are defined here, these being: • Sequence Diagrams. • Class Diagrams. • Interface specification plus detailed method descriptions. • State Transition diagrams. • Data Definitions. • IDL Description of the interfaces. The process by which this task is accomplished is through the use of object modelling techniques described by the Unified Modelling Language (UML).
SIST ES 204 915-16 V1.1.1:2008 is classified under the following ICS (International Classification for Standards) categories: 35.100.01 - Open systems interconnection in general. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST ES 204 915-16 V1.1.1:2008 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
Final draft ETSI ES 204 915-16 V1.1.1 (2008-02)
ETSI Standard
Open Service Access (OSA);
Application Programming Interface (API);
Part 16: Service Broker SCF
(Parlay 6)
�
2 Final draft ETSI ES 204 915-16 V1.1.1 (2008-02)
Reference
DES/TISPAN-01032-16-OSA
Keywords
API, IDL, OSA, UML
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2008.
© The Parlay Group 2008.
All rights reserved.
TM TM TM TM
DECT , PLUGTESTS , UMTS , TIPHON , the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered
for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
ETSI
3 Final draft ETSI ES 204 915-16 V1.1.1 (2008-02)
Contents
Intellectual Property Rights.5
Foreword.5
1 Scope.6
2 References.6
3 Definitions and abbreviations.6
3.1 Definitions.6
3.2 Abbreviations.6
4 Service Broker SCF.7
4.1 General requirements on support of methods.7
5 Sequence Diagrams.7
6 Class Diagrams.8
7 The Service Interface Specifications.8
7.1 Interface Specification Format .8
7.1.1 Interface Class.8
7.1.2 Method descriptions.8
7.1.3 Parameter descriptions.8
7.1.4 State Model.9
7.2 Base Interface.9
7.2.1 Interface Class IpInterface .9
7.3 Service Interfaces.9
7.3.1 Overview.9
7.4 Generic Service Interface .9
7.4.1 Interface Class IpService .9
7.4.1.1 Method setCallback().10
7.4.1.2 Method setCallbackWithSessionID().10
8 Service Broker Interface Classes.10
8.1 Interface Class IpServiceBroker.10
8.1.1 Method register().11
8.1.2 Method unregister().12
9 State Transition Diagrams.12
10 Service Broker Service Properties.12
11 Data Definitions.12
11.1 Service Broker Data Definitions .12
11.1.1 clientBrokerID.12
11.1.2 TpEndpointAddress .13
11.1.3 TpEndpointAddressCategory.13
11.1.4 TpServiceKey.13
11.1.5 TpServiceKeyType.13
12 Exception Classes.13
Annex A (normative): OMG IDL Description of Service Broker SCF .14
Annex B (informative): W3C WSDL Description of Service Broker SCF.15
Annex C (informative): Java API Description of the Service Broker SCF .16
Annex D (informative): Contents of 3GPP OSA R7 Service Broker .17
Annex E (informative): Description of Service Broker for 3GPP2 cdma2000 networks.18
ETSI
4 Final draft ETSI ES 204 915-16 V1.1.1 (2008-02)
E.1 General Exceptions.18
E.2 Specific Exceptions.18
E.2.1 Clause 1: Scope .18
E.2.2 Clause 2: References .18
E.2.3 Clause 3: Definitions and abbreviations.18
E.2.4 Clause 4: Service Broker SCF.18
E.2.5 Clause 5: Sequence Diagrams .18
E.2.6 Clause 6: Class Diagrams.18
E.2.7 Clause 7: The Service Interface Specifications .18
E.2.8 Clause 8: Service Broker Interface Classes.19
E.2.9 Clause 9: State Transition Diagrams .19
E.2.10 Clause 10: Service Broker Service Properties.19
E.2.11 Clause 11: Data Definitions.19
E.2.12 Annex A (normative): OMG IDL Description of Service Broker SCF.19
E.2.13 Annex B (informative): W3C WSDL Description of Service Broker SCF.19
Annex F (informative): Record of changes .20
F.1 Interfaces.20
F.1.1 New.20
F.1.2 Deprecated.20
F.1.3 Removed.20
F.2 Methods.20
F.2.1 New.20
F.2.2 Deprecated.20
F.2.3 Modified.21
F.2.4 Removed.21
F.3 Data Definitions.21
F.3.1 New.21
F.3.2 Modified.21
F.3.3 Removed.21
F.4 Service Properties.21
F.4.1 New.21
F.4.2 Deprecated.22
F.4.3 Modified.22
F.4.4 Removed.22
F.5 Exceptions.22
F.5.1 New.22
F.5.2 Modified.22
F.5.3 Removed.22
F.6 Others.22
History .23
ETSI
5 Final draft ETSI ES 204 915-16 V1.1.1 (2008-02)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This ETSI Standard (ES) has been produced by ETSI Technical Committee Telecommunications and Internet
converged Services and Protocols for Advanced Networking (TISPAN), and is now submitted for the ETSI standards
Membership Approval Procedure.
The present document is part 16 of a multi-part deliverable covering Open Service Access (OSA); Application
Programming Interface (API), as identified below. The API specification (ES 204 915) is structured in the following
parts:
Part 1: "Overview";
Part 2: "Common Data Definitions";
Part 3: "Framework";
Part 4: "Call Control";
Part 5: "User Interaction SCF";
Part 6: "Mobility SCF";
Part 7: "Terminal Capabilities SCF";
Part 8: "Data Session Control SCF";
Part 9: "Generic Messaging SCF";
Part 10: "Connectivity Manager SCF";
Part 11: "Account Management SCF";
Part 12: "Charging SCF";
Part 13: "Policy Management SCF";
Part 14: "Presence and Availability Management SCF";
Part 15: "Multi-Media Messaging SCF";
Part 16: "Service Broker SCF".
The present document has been defined jointly between ETSI, The Parlay Group (http://www.parlay.org) and the 3GPP,
in co-operation with a number of JAIN™ Community (http://www.java.sun.com/products/jain) member companies.
The present document forms part of the Parlay 6.0 set of specifications.
The present document is equivalent to 3GPP TS 29.198-16 V1.0.0 (Release 7).
ETSI
6 Final draft ETSI ES 204 915-16 V1.1.1 (2008-02)
1 Scope
The present document is part 16 of the Stage 3 specification for an Application Programming Interface (API) for Open
Service Access (OSA).
The OSA specifications define an architecture that enables application developers to make use of network functionality
through an open standardised interface, i.e. the OSA APIs.
The present document specifies the Service Broker Service Capability Feature (SCF) aspects of the interface. All
aspects of the Service Broker SCF are defined here, these being:
• Sequence Diagrams.
• Class Diagrams.
• Interface specification plus detailed method descriptions.
• State Transition diagrams.
• Data Definitions.
• IDL Description of the interfaces.
The process by which this task is accomplished is through the use of object modelling techniques described by the
Unified Modelling Language (UML).
2 References
The references listed in clause 2 of ES 204 915-1 contain provisions which, through reference in this text, constitute
provisions of the present document.
ETSI ES 204 915-1: "Open Service Access (OSA); Application Programming Interface (API); Part 1: Overview
(Parlay 6)".
3 Definitions and abbreviations
3.1 Definitions
For the purposes of the present document, the terms and definitions given in ES 204 915-1 apply.
3.2 Abbreviations
For the purposes of the present document, the abbreviations given in ES 204 915-1 apply.
ETSI
7 Final draft ETSI ES 204 915-16 V1.1.1 (2008-02)
4 Service Broker SCF
The following clauses describe each aspect of the Service Broker Service Capability Feature (SCF).
The order is as follows:
• The Sequence diagrams give the reader a practical idea of how each of the SCF is implemented.
• The Class relationships clause shows how each of the interfaces applicable to the SCF, relate to one another.
• The Interface specification clause describes in detail each of the interfaces shown within the Class diagram
part.
• The State Transition Diagrams (STD) show the transition between states in the SCF. The states and transitions
are well-defined; either methods specified in the Interface specification or events occurring in the underlying
networks cause state transitions.
• The Data Definitions clause shows a detailed expansion of each of the data types associated with the methods
within the classes. Note that some data types are used in other methods and classes and are therefore defined
within the Common Data types part ES 204 915-2.
4.1 General requirements on support of methods
An implementation of this API which supports or implements a method described in the present document, shall
support or implement the functionality described for that method, for at least one valid set of values for the parameters
of that method.
Where a method is not supported by an implementation of a Service interface, the exception
P_METHOD_NOT_SUPPORTED shall be returned to any call of that method.
Where a me
...
ETSI Standard
Open Service Access (OSA);
Application Programming Interface (API);
Part 16: Service Broker SCF
(Parlay 6)
�
2 ETSI ES 204 915-16 V1.1.1 (2008-05)
Reference
DES/TISPAN-01032-16-OSA
Keywords
API, IDL, OSA, UML
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2008.
© The Parlay Group 2008.
All rights reserved.
TM TM TM TM
DECT , PLUGTESTS , UMTS , TIPHON , the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered
for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
ETSI
3 ETSI ES 204 915-16 V1.1.1 (2008-05)
Contents
Intellectual Property Rights.5
Foreword.5
1 Scope.6
2 References.6
3 Definitions and abbreviations.6
3.1 Definitions.6
3.2 Abbreviations.6
4 Service Broker SCF.7
4.1 General requirements on support of methods.7
5 Sequence Diagrams.7
6 Class Diagrams.8
7 The Service Interface Specifications.8
7.1 Interface Specification Format .8
7.1.1 Interface Class.8
7.1.2 Method descriptions.8
7.1.3 Parameter descriptions.8
7.1.4 State Model.9
7.2 Base Interface.9
7.2.1 Interface Class IpInterface .9
7.3 Service Interfaces.9
7.3.1 Overview.9
7.4 Generic Service Interface .9
7.4.1 Interface Class IpService .9
7.4.1.1 Method setCallback().10
7.4.1.2 Method setCallbackWithSessionID().10
8 Service Broker Interface Classes.10
8.1 Interface Class IpServiceBroker.10
8.1.1 Method register().11
8.1.2 Method unregister().12
9 State Transition Diagrams.12
10 Service Broker Service Properties.12
11 Data Definitions.12
11.1 Service Broker Data Definitions .12
11.1.1 clientBrokerID.12
11.1.2 TpEndpointAddress .13
11.1.3 TpEndpointAddressCategory.13
11.1.4 TpServiceKey.13
11.1.5 TpServiceKeyType.13
12 Exception Classes.13
Annex A (normative): OMG IDL Description of Service Broker SCF .14
Annex B (informative): W3C WSDL Description of Service Broker SCF.15
Annex C (informative): Java API Description of the Service Broker SCF .16
Annex D (informative): Contents of 3GPP OSA R7 Service Broker .17
Annex E (informative): Description of Service Broker for 3GPP2 cdma2000 networks.18
ETSI
4 ETSI ES 204 915-16 V1.1.1 (2008-05)
E.1 General Exceptions.18
E.2 Specific Exceptions.18
E.2.1 Clause 1: Scope .18
E.2.2 Clause 2: References .18
E.2.3 Clause 3: Definitions and abbreviations.18
E.2.4 Clause 4: Service Broker SCF.18
E.2.5 Clause 5: Sequence Diagrams .18
E.2.6 Clause 6: Class Diagrams.18
E.2.7 Clause 7: The Service Interface Specifications .18
E.2.8 Clause 8: Service Broker Interface Classes.19
E.2.9 Clause 9: State Transition Diagrams .19
E.2.10 Clause 10: Service Broker Service Properties.19
E.2.11 Clause 11: Data Definitions.19
E.2.12 Annex A (normative): OMG IDL Description of Service Broker SCF.19
E.2.13 Annex B (informative): W3C WSDL Description of Service Broker SCF.19
Annex F (informative): Record of changes .20
F.1 Interfaces.20
F.1.1 New.20
F.1.2 Deprecated.20
F.1.3 Removed.20
F.2 Methods.20
F.2.1 New.20
F.2.2 Deprecated.20
F.2.3 Modified.21
F.2.4 Removed.21
F.3 Data Definitions.21
F.3.1 New.21
F.3.2 Modified.21
F.3.3 Removed.21
F.4 Service Properties.21
F.4.1 New.21
F.4.2 Deprecated.22
F.4.3 Modified.22
F.4.4 Removed.22
F.5 Exceptions.22
F.5.1 New.22
F.5.2 Modified.22
F.5.3 Removed.22
F.6 Others.22
History .23
ETSI
5 ETSI ES 204 915-16 V1.1.1 (2008-05)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This ETSI Standard (ES) has been produced by ETSI Technical Committee Telecommunications and Internet
converged Services and Protocols for Advanced Networking (TISPAN).
The present document is part 16 of a multi-part deliverable covering Open Service Access (OSA); Application
Programming Interface (API), as identified below. The API specification (ES 204 915) is structured in the following
parts:
Part 1: "Overview";
Part 2: "Common Data Definitions";
Part 3: "Framework";
Part 4: "Call Control";
Part 5: "User Interaction SCF";
Part 6: "Mobility SCF";
Part 7: "Terminal Capabilities SCF";
Part 8: "Data Session Control SCF";
Part 9: "Generic Messaging SCF";
Part 10: "Connectivity Manager SCF";
Part 11: "Account Management SCF";
Part 12: "Charging SCF";
Part 13: "Policy Management SCF";
Part 14: "Presence and Availability Management SCF";
Part 15: "Multi-Media Messaging SCF";
Part 16: "Service Broker SCF".
The present document has been defined jointly between ETSI, The Parlay Group (http://www.parlay.org) and the 3GPP,
in co-operation with a number of JAIN™ Community (http://www.java.sun.com/products/jain) member companies.
The present document forms part of the Parlay 6.0 set of specifications.
The present document is equivalent to 3GPP TS 29.198-16 V1.0.0 (Release 7).
ETSI
6 ETSI ES 204 915-16 V1.1.1 (2008-05)
1 Scope
The present document is part 16 of the Stage 3 specification for an Application Programming Interface (API) for Open
Service Access (OSA).
The OSA specifications define an architecture that enables application developers to make use of network functionality
through an open standardised interface, i.e. the OSA APIs.
The present document specifies the Service Broker Service Capability Feature (SCF) aspects of the interface. All
aspects of the Service Broker SCF are defined here, these being:
• Sequence Diagrams.
• Class Diagrams.
• Interface specification plus detailed method descriptions.
• State Transition diagrams.
• Data Definitions.
• IDL Description of the interfaces.
The process by which this task is accomplished is through the use of object modelling techniques described by the
Unified Modelling Language (UML).
2 References
The references listed in clause 2 of ES 204 915-1 contain provisions which, through reference in this text, constitute
provisions of the present document.
ETSI ES 204 915-1: "Open Service Access (OSA); Application Programming Interface (API); Part 1: Overview
(Parlay 6)".
3 Definitions and abbreviations
3.1 Definitions
For the purposes of the present document, the terms and definitions given in ES 204 915-1 apply.
3.2 Abbreviations
For the purposes of the present document, the abbreviations given in ES 204 915-1 apply.
ETSI
7 ETSI ES 204 915-16 V1.1.1 (2008-05)
4 Service Broker SCF
The following clauses describe each aspect of the Service Broker Service Capability Feature (SCF).
The order is as follows:
• The Sequence diagrams give the reader a practical idea of how each of the SCF is implemented.
• The Class relationships clause shows how each of the interfaces applicable to the SCF, relate to one another.
• The Interface specification clause describes in detail each of the interfaces shown within the Class diagram
part.
• The State Transition Diagrams (STD) show the transition between states in the SCF. The states and transitions
are well-defined; either methods specified in the Interface specification or events occurring in the underlying
networks cause state transitions.
• The Data Definitions clause shows a detailed expansion of each of the data types associated with the methods
within the classes. Note that some data types are used in other methods and classes and are therefore defined
within the Common Data types part ES 204 915-2.
4.1 General requirements on support of methods
An implementation of this API which supports or implements a method described in the present document, shall
support or implement the functionality described for that method, for at least one valid set of values for the parameters
of that method.
Where a method is not supported by an implementation of a Service interface, the exception
P_METHOD_NOT_SUPPORTED shall be returned to any call of that method.
Where a
...
SLOVENSKI STANDARD
01-september-2008
Odprti dostop do storitve (OSA) - Aplikacijski programski vmesnik (API) - 16. del:
Lastnost storitvene zmožnosti (SCF) za storitvenega posrednika (Parlay 6)
Open Service Access (OSA) - Application Programming Interface (API) - Part 16: Service
Broker SCF (Parlay 6)
Ta slovenski standard je istoveten z: ES 204 915-16 Version 1.1.1
ICS:
35.100.01 Medsebojno povezovanje Open systems
odprtih sistemov na splošno interconnection in general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
ETSI Standard
Open Service Access (OSA);
Application Programming Interface (API);
Part 16: Service Broker SCF
(Parlay 6)
�
2 ETSI ES 204 915-16 V1.1.1 (2008-05)
Reference
DES/TISPAN-01032-16-OSA
Keywords
API, IDL, OSA, UML
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2008.
© The Parlay Group 2008.
All rights reserved.
TM TM TM TM
DECT , PLUGTESTS , UMTS , TIPHON , the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered
for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
ETSI
3 ETSI ES 204 915-16 V1.1.1 (2008-05)
Contents
Intellectual Property Rights.5
Foreword.5
1 Scope.6
2 References.6
3 Definitions and abbreviations.6
3.1 Definitions.6
3.2 Abbreviations.6
4 Service Broker SCF.7
4.1 General requirements on support of methods.7
5 Sequence Diagrams.7
6 Class Diagrams.8
7 The Service Interface Specifications.8
7.1 Interface Specification Format .8
7.1.1 Interface Class.8
7.1.2 Method descriptions.8
7.1.3 Parameter descriptions.8
7.1.4 State Model.9
7.2 Base Interface.9
7.2.1 Interface Class IpInterface .9
7.3 Service Interfaces.9
7.3.1 Overview.9
7.4 Generic Service Interface .9
7.4.1 Interface Class IpService .9
7.4.1.1 Method setCallback().10
7.4.1.2 Method setCallbackWithSessionID().10
8 Service Broker Interface Classes.10
8.1 Interface Class IpServiceBroker.10
8.1.1 Method register().11
8.1.2 Method unregister().12
9 State Transition Diagrams.12
10 Service Broker Service Properties.12
11 Data Definitions.12
11.1 Service Broker Data Definitions .12
11.1.1 clientBrokerID.12
11.1.2 TpEndpointAddress .13
11.1.3 TpEndpointAddressCategory.13
11.1.4 TpServiceKey.13
11.1.5 TpServiceKeyType.13
12 Exception Classes.13
Annex A (normative): OMG IDL Description of Service Broker SCF .14
Annex B (informative): W3C WSDL Description of Service Broker SCF.15
Annex C (informative): Java API Description of the Service Broker SCF .16
Annex D (informative): Contents of 3GPP OSA R7 Service Broker .17
Annex E (informative): Description of Service Broker for 3GPP2 cdma2000 networks.18
ETSI
4 ETSI ES 204 915-16 V1.1.1 (2008-05)
E.1 General Exceptions.18
E.2 Specific Exceptions.18
E.2.1 Clause 1: Scope .18
E.2.2 Clause 2: References .18
E.2.3 Clause 3: Definitions and abbreviations.18
E.2.4 Clause 4: Service Broker SCF.18
E.2.5 Clause 5: Sequence Diagrams .18
E.2.6 Clause 6: Class Diagrams.18
E.2.7 Clause 7: The Service Interface Specifications .18
E.2.8 Clause 8: Service Broker Interface Classes.19
E.2.9 Clause 9: State Transition Diagrams .19
E.2.10 Clause 10: Service Broker Service Properties.19
E.2.11 Clause 11: Data Definitions.19
E.2.12 Annex A (normative): OMG IDL Description of Service Broker SCF.19
E.2.13 Annex B (informative): W3C WSDL Description of Service Broker SCF.19
Annex F (informative): Record of changes .20
F.1 Interfaces.20
F.1.1 New.20
F.1.2 Deprecated.20
F.1.3 Removed.20
F.2 Methods.20
F.2.1 New.20
F.2.2 Deprecated.20
F.2.3 Modified.21
F.2.4 Removed.21
F.3 Data Definitions.21
F.3.1 New.21
F.3.2 Modified.21
F.3.3 Removed.21
F.4 Service Properties.21
F.4.1 New.21
F.4.2 Deprecated.22
F.4.3 Modified.22
F.4.4 Removed.22
F.5 Exceptions.22
F.5.1 New.22
F.5.2 Modified.22
F.5.3 Removed.22
F.6 Others.22
History .23
ETSI
5 ETSI ES 204 915-16 V1.1.1 (2008-05)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This ETSI Standard (ES) has been produced by ETSI Technical Committee Telecommunications and Internet
converged Services and Protocols for Advanced Networking (TISPAN).
The present document is part 16 of a multi-part deliverable covering Open Service Access (OSA); Application
Programming Interface (API), as identified below. The API specification (ES 204 915) is structured in the following
parts:
Part 1: "Overview";
Part 2: "Common Data Definitions";
Part 3: "Framework";
Part 4: "Call Control";
Part 5: "User Interaction SCF";
Part 6: "Mobility SCF";
Part 7: "Terminal Capabilities SCF";
Part 8: "Data Session Control SCF";
Part 9: "Generic Messaging SCF";
Part 10: "Connectivity Manager SCF";
Part 11: "Account Management SCF";
Part 12: "Charging SCF";
Part 13: "Policy Management SCF";
Part 14: "Presence and Availability Management SCF";
Part 15: "Multi-Media Messaging SCF";
Part 16: "Service Broker SCF".
The present document has been defined jointly between ETSI, The Parlay Group (http://www.parlay.org) and the 3GPP,
in co-operation with a number of JAIN™ Community (http://www.java.sun.com/products/jain) member companies.
The present document forms part of the Parlay 6.0 set of specifications.
The present document is equivalent to 3GPP TS 29.198-16 V1.0.0 (Release 7).
ETSI
6 ETSI ES 204 915-16 V1.1.1 (2008-05)
1 Scope
The present document is part 16 of the Stage 3 specification for an Application Programming Interface (API) for Open
Service Access (OSA).
The OSA specifications define an architecture that enables application developers to make use of network functionality
through an open standardised interface, i.e. the OSA APIs.
The present document specifies the Service Broker Service Capability Feature (SCF) aspects of the interface. All
aspects of the Service Broker SCF are defined here, these being:
• Sequence Diagrams.
• Class Diagrams.
• Interface specification plus detailed method descriptions.
• State Transition diagrams.
• Data Definitions.
• IDL Description of the interfaces.
The process by which this task is accomplished is through the use of object modelling techniques described by the
Unified Modelling Language (UML).
2 References
The references listed in clause 2 of ES 204 915-1 contain provisions which, through reference in this text, constitute
provisions of the present document.
ETSI ES 204 915-1: "Open Service Access (OSA); Application Programming Interface (API); Part 1: Overview
(Parlay 6)".
3 Definitions and abbreviations
3.1 Definitions
For the purposes of the present document, the terms and definitions given in ES 204 915-1 apply.
3.2 Abbreviations
For the purposes of the present document, the abbreviations given in ES 204 915-1 apply.
ETSI
7 ETSI ES 204 915-16 V1.1.1 (2008-05)
4 Service Broker SCF
The following clauses describe each aspect of the Service Broker Service Capability Feature (SCF).
The order is as follows:
• The Sequence diagrams give the reader a practical idea of how each of the SCF is implemented.
• The Class relationships clause shows how each of the interfaces applicable to the SCF, relate to one another.
• The Interface specification clause describes in detail each of the interfaces shown within the Class diagram
part.
• The State Transition Diagrams (STD) show the transition between states in the SCF. The states and transitions
are well-defined; either methods specified in the Interface specification or events occurring in the underlying
networks cause state transitions.
• The Data Definitions clause shows a detailed expansion of each of the data types associated with the methods
within the classes. Note that some data types are used in other methods and classes and are therefore defined
within the Common Data types part ES 204 915-2.
4.1 General requirements on support of methods
An implementation of this API which supports or implements a method described in the present document, shall
support or implement the functionality described for that method, for
...