SIST EN ISO 15613:2025

SLOVENSKI STANDARD
01-november-2025
Nadomešča:
SIST EN ISO 15613:2004
Popis in kvalifikacija varilnih postopkov za kovinske materiale - Kvalifikacija na
podlagi predproizvodnega preskusa varjenja (ISO 15613:2025)
Specification and qualification of welding procedures for metallic materials - Qualification
based on a pre-production welding test (ISO 15613:2025)
Anforderung und Qualifizierung von Schweißverfahren für metallische Werkstoffe -
Qualifizierung aufgrund einer vorgezogenen Arbeitsprüfung (ISO 15613:2025)
Descriptif et qualification d'un mode opératoire de soudage pour les matériaux
métalliques - Qualification sur la base d'un assemblage soudé de préproduction (ISO
15613:2025)
Ta slovenski standard je istoveten z: EN ISO 15613:2025
ICS:
25.160.10 Varilni postopki in varjenje Welding processes
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 15613
EUROPEAN STANDARD
NORME EUROPÉENNE
September 2025
EUROPÄISCHE NORM
ICS 25.160.10 Supersedes EN ISO 15613:2004
English Version
Specification and qualification of welding procedures for
metallic materials - Qualification based on a pre-
production welding test (ISO 15613:2025)
Descriptif et qualification d'un mode opératoire de Anforderung und Qualifizierung von Schweißverfahren
soudage pour les matériaux métalliques - Qualification für metallische Werkstoffe - Qualifizierung aufgrund
sur la base d'un assemblage soudé de préproduction einer vorgezogenen Arbeitsprüfung (ISO 15613:2025)
(ISO 15613:2025)
This European Standard was approved by CEN on 17 August 2025.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2025 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 15613:2025 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
Annex ZA (informative) Relationship between this European Standard and the Essential
Requirements of EU Directive 2014/68/EU (PED) aimed to be covered . 4

European foreword
This document (EN ISO 15613:2025) has been prepared by Technical Committee ISO/TC 44 "Welding
and allied processes" in collaboration with Technical Committee CEN/TC 121 “Welding and allied
processes” the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by March 2026, and conflicting national standards shall
be withdrawn at the latest by March 2026.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 15613:2004.
This document has been prepared under a standardization request addressed to CEN by the European
Commission. The Standing Committee of the EFTA States subsequently approves these requests for its
Member States.
For the relationship with EU Legislation, see informative Annex ZA, which is an integral part of this
document.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 15613:2025 has been approved by CEN as EN ISO 15613:2025 without any modification.

Annex ZA
(informative)
Relationship between this European Standard and the Essential
Requirements of EU Directive 2014/68/EU (PED) aimed to be covered
This European Standard has been prepared under a Commission’s standardization request M/601 to
provide one voluntary means of conforming to Essential Safety Requirements of the New Approach
Pressure Equipment Directive 2014/68/EU.
Once this standard is cited in the Official Journal of the European Union under that Directive,
compliance with the normative clauses of this standard given in Table ZA.1 and application of the
edition of the normatively referenced standards as given in Table ZA.2 confers, within the limits of the
scope of this standard, a presumption of conformity with the corresponding Essential Safety
Requirements of that Directive and associated EFTA regulations.
Table ZA.1 — Correspondence between this European Standard and Annex I
of the Directive 2014/68/EU (PED)
Essential Requirements of Clauses of this EN Remarks/Notes
Directive 2014/68/EU (PED)
Permanent joining. For pressure
resistant components of pressure
3.1.2, paragraphs 3, 4 and 5 4, 5, 6, 7, 8, 9 and 10 equipment in the categories II, III and
IV the examiner/examining body is a
competent third party.
Table ZA.2 — Normative references from Clause 2 of this document and their corresponding
European publications
Column 1 Column 2 Column 3 Column 4
Reference in International Standard Title Corresponding
Clause 2 Edition European Standard
Edition
ISO 15607 ISO 15607:2019 Specification and EN ISO 15607:2019
qualification of welding
procedures for metallic
materials — General rules
ISO 15609-1 ISO 15609-1:2019 Specification and EN ISO 15609-1:2019
qualification of welding
procedures for metallic
materials — Welding
procedure specification —
Part 1: Arc welding
ISO 15609-2 ISO 15609-2:2019 Specification and EN ISO 15609-1:2019
qualification of welding
procedures for metallic
materials — Welding
procedure specification —
Column 1 Column 2 Column 3 Column 4
Reference in International Standard Title Corresponding
Clause 2 Edition European Standard
Edition
Part 2: Gas welding
ISO 15609-3 ISO 15609-3:2004 Specification and EN ISO 15609-3:2004
qualification of welding
procedures for metallic
materials — Welding
procedure specification —
Part 3: Electron beam
welding
ISO 15609-4 ISO 15609-4:2009 Specification and EN ISO 15609-4:2009
qualification of welding
procedures for metallic
materials — Welding
procedure specification —
Part 4: Laser beam welding
ISO 15609-5 ISO 15609-5:2011 Specification and EN ISO 15609-5:2011
qualification of welding
procedures for metallic
materials — Welding
procedure specification —
Part 5: Resistance welding
ISO 15609-6 ISO 15609-6:2013 Specification and EN ISO 15609-6:2013
qualification of welding
procedures for metallic
materials — Welding
procedure specification —
Part 6: Laser-arc hybrid
welding
ISO 15614-1 ISO 15614-1:2017 Specification and EN ISO 15614-1:2017
qualification of welding
ISO 15614-1:2017/Amd EN ISO 15614-
procedures for metallic
1:1019 1:2017/A1:2019
materials — Welding
procedure test — Part 1:
Arc and gas welding of
steels and arc welding of
nickel and nickel alloys
ISO 15614-2 ISO 15614-2:2005 Specification and EN ISO 15614-2:2005
qualification of welding
ISO 15614-2:2005/Cor EN ISO 15614-
procedures for metallic
2:2009 2:2005/AC:2009
materials — Welding
procedure test — Part 2:
Arc welding of aluminium
and its alloys
ISO 15614-3 ISO 15614-3:2008 Specification and EN ISO 15614-3:2008
qualification of welding
procedures for metallic
Column 1 Column 2 Column 3 Column 4
Reference in International Standard Title Corresponding
Clause 2 Edition European Standard
Edition
materials — Welding
procedure test — Part 3:
Fusion welding of non-
alloyed and low-alloyed cast
irons
ISO 15614-5 ISO 15614-5:2004 Specification and EN ISO 15614-5:2004
qualification of welding
procedures for metallic
materials — Welding
procedure test — Part 5:
Arc welding of titanium,
zirconium and their alloys
ISO 15614-6 ISO 15614-6:2006 Specification and EN ISO 15614-6:2006
qualification of welding
procedures for metallic
materials — Welding
procedure test — Part 6:
Arc and gas welding of
copper and its alloys
ISO 15614-8 ISO 15614-8:2016 Specification and EN ISO 15614-8:2016
qualification of welding
procedures for metallic
materials — Welding
procedure test — Part 8:
Welding of tubes to tube-
plate joints
ISO 15614-10 ISO 15614-10:2005 Specification and EN ISO 15614-10:2005
qualification of welding
procedures for metallic
materials — Welding
procedure test — Part 10:
Hyperbaric dry welding
ISO 15614-11 ISO 15614-11:2002 Specification and EN ISO 15614-11:2002
qualification of welding
procedures for metallic
materials — Welding
procedure test — Part 11:
Electron and laser beam
welding
ISO 15614-12 ISO 15614-12:2021 Specification and EN ISO 15614-12:2021
qualification of welding
procedures for metallic
materials — Welding
procedure test — Part 12:
Spot, seam and projection
Column 1 Column 2 Column 3 Column 4
Reference in International Standard Title Corresponding
Clause 2 Edition European Standard
Edition
welding
ISO 15614-13 ISO 15614-13:2021 Specification and EN ISO 15614-13:2021
qualification of welding
procedures for metallic
materials — Welding
procedure test — Part 13:
Upset (resistance butt) and
flash welding
ISO 15614-14 ISO 15614-13:2013 Specification and EN ISO 15614-13:2013
qualification of welding
procedures for metallic
materials — Welding
procedure test — Part 14:
Laser-arc hybrid welding of
steels, nickel and nickel
alloys
ISO/TR 25901- ISO/TR 17671-4:2016 Welding and allied None
1 processes — Vocabulary —
For applicable standard
Part 1: General terms
edition see Column 2
ISO 25901-2 ISO 25901-2:2022 Welding and allied EN ISO 25901-2:2023
processes — Vocabulary —
Part 2: Health and safety
ISO/TR 25901- ISO/TR 25901-4:2016 Welding and allied None
4 processes — Vocabulary —
For applicable standard
Part 4: Arc welding
edition see Column 2
The documents listed in the Column 1 of Table ZA.2, in whole or in part, are normatively referenced in
this document, i.e. are indispensable for its application. The achievement of the presumption of
conformity is subject to the application of the edition of Standards as listed in Column 4 or, if no
European Standard Edition exists, the International Standard Edition given in Column 2 of Table ZA.2.
WARNING 1 Presumption of conformity stays valid only as long as a reference to this European Standard is
maintained in the list published in the Official Journal of the European Union. Users of this standard should
consult frequently the latest list published in the Official Journal of the European Union.
WARNING 2 Other Union legislation may be applicable to the products falling within the scope of this standard.

International
Standard
ISO 15613
Second edition
Specification and qualification of
2025-08
welding procedures for metallic
materials — Qualification based on
a pre-production welding test
Descriptif et qualification d'un mode opératoire de soudage
pour les matériaux métalliques — Qualification sur la base d'un
assemblage soudé de préproduction
Reference number
ISO 15613:2025(en) © ISO 2025
ISO 15613:2025(en)
© ISO 2025
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
ISO 15613:2025(en)
Contents Page
Foreword .iv
Introduction .
...