SIST EN 12649:2008/kprA1:2011
(Amendment)Concrete compactors and smoothing machines - Safety
Concrete compactors and smoothing machines - Safety
1.1 This document applies to concrete compactors and smoothing machines as defined in Clause 3 and illus-trated in Annex A and Annex B.
This standard also applies for hand-held motor-operated concrete vibrators as defined in EN 60745-2-12:2003, but with the additional safety requirements for electronically controlled systems as defined in this standard (see 5.2.1.2).
1.2 This document does not deal with auxiliary equipment which provides the energy for internal and external vibrators, e.g. air compressors, hydraulic power sources and voltage transformers. This document does not apply to remote-controlled or portable smoothing machines and self-acting (robotic) smoothing machines.
1.3 This document deals with all significant hazards, hazardous situations and events relevant to concrete com-pactors and smoothing machines, when they are used as intended and under the conditions foreseen by the manu-facturer (see Clause 4). This document specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards.
This standard also includes measures to consider reasonably foreseeable misuse.
1.4 This document is not applicable to machines which are manufactured before the date of publication of this document by CEN.
Maschinen zum Verdichten und Glätten von Beton - Sicherheitsanforderungen
Compacteurs à béton et talocheuses - Prescriptions de sécurité
Stroji za komprimiranje in glajenje betona - Varnost
General Information
- Status
- Not Published
- Public Enquiry End Date
- 24-Apr-2011
- Technical Committee
- I13 - Imaginarni 13
- Current Stage
- 98 - Abandoned project (Adopted Project)
- Start Date
- 08-Oct-2019
- Due Date
- 13-Oct-2019
- Completion Date
- 08-Oct-2019
Relations
- Effective Date
- 30-Apr-2011
- Effective Date
- 10-Oct-2009
Overview
SIST EN 12649:2008/kprA1:2011 – Concrete Compactors and Smoothing Machines – Safety is a European Standard published by CEN, defining safety requirements for concrete compactors and smoothing machines. The standard addresses significant hazards, hazardous situations, and events associated with the use of these machines, as intended by manufacturers. It applies to both ride-on and walk-behind concrete compactors and smoothing machines, including hand-held motor-operated concrete vibrators, covering additional safety requirements for electronically controlled systems.
This standard is crucial for manufacturers, importers, and users within the construction industry to ensure compliance with EU Directive 2006/42/EC (Machinery Directive), supporting safe operation and minimizing risks.
Key Topics
- Scope: Covers concrete compactors and smoothing machines defined in the standard, including hand-held motor-operated concrete vibrators with electronic controls.
- Hazard Identification: Focuses on all significant hazards related to concrete compactors and smoothing machines, including those arising from foreseeable misuse.
- Technical Safety Measures: Specifies methods to eliminate or reduce risks, such as directing exhaust gases away from operators and requiring low-emission drives for certain indoor uses.
- Exclusions: Does not address auxiliary equipment (e.g., compressors, hydraulic power sources), remote-controlled or robotic smoothing machines, or machines manufactured before the publication date.
- Operation Conditions: Details manufacturer’s responsibilities for providing information on the proper and safe use, particularly the risks of harmful exhaust gases.
- Compliance: Aligned with relevant EU Directives and legal requirements for machinery used in construction.
Applications
The practical value of SIST EN 12649:2008/kprA1:2011 lies in its application to a wide range of construction equipment, ensuring machinery safety for workers on sites where concrete compactors and smoothing machines are used. Key applications include:
- Manufacturers: Provides a framework for designing and producing safe concrete compactors and smoothing machines in line with European legislation. It stipulates technical safety measures, such as exhaust gas management and emissions reduction for indoor and outdoor use.
- Site Operators & Contractors: Enables selection and safe operation of equipment, reducing exposure to hazardous exhaust gases and other risks when compacting or smoothing concrete surfaces.
- Importers and Distributors: Ensures machinery placed on the EU market meets harmonized safety standards, promoting user safety and minimizing liability.
- Regulatory Compliance: Supports conformity assessment for CE marking under the Machinery Directive (2006/42/EC), demonstrating due diligence in workplace safety and legal compliance.
- Training & Documentation: Assists employers and health & safety managers in delivering effective training, hazard communication, and operational guidance to machine operators.
Related Standards
SIST EN 12649:2008/kprA1:2011 references additional standards crucial for comprehensive machinery safety in the construction industry, including:
- EN ISO 12100-1 – Safety of machinery: General principles for design - Risk assessment and risk reduction
- EN 60745-2-12:2003 – Safety requirements for hand-held motor-operated electric tools (vibrators for concrete)
- Machinery Directive 2006/42/EC – European directive governing the design, manufacture, and supply of safe machinery
- Other standards specific to construction equipment and emission controls
By adhering to SIST EN 12649:2008/kprA1:2011, stakeholders improve construction site safety, fulfill legal requirements, and contribute to the harmonization of machinery standards across Europe, fostering safer work environments for all involved in concrete preparation and finishing.
Get Certified
Connect with accredited certification bodies for this standard
DIBt (Deutsches Institut für Bautechnik)
German Institute for Building Technology.
DIN CERTCO
DIN Group product certification.
Aboma Certification B.V.
Specialized in construction, metal, and transport sectors.
Sponsored listings
Frequently Asked Questions
SIST EN 12649:2008/kprA1:2011 is a draft published by the Slovenian Institute for Standardization (SIST). Its full title is "Concrete compactors and smoothing machines - Safety". This standard covers: 1.1 This document applies to concrete compactors and smoothing machines as defined in Clause 3 and illus-trated in Annex A and Annex B. This standard also applies for hand-held motor-operated concrete vibrators as defined in EN 60745-2-12:2003, but with the additional safety requirements for electronically controlled systems as defined in this standard (see 5.2.1.2). 1.2 This document does not deal with auxiliary equipment which provides the energy for internal and external vibrators, e.g. air compressors, hydraulic power sources and voltage transformers. This document does not apply to remote-controlled or portable smoothing machines and self-acting (robotic) smoothing machines. 1.3 This document deals with all significant hazards, hazardous situations and events relevant to concrete com-pactors and smoothing machines, when they are used as intended and under the conditions foreseen by the manu-facturer (see Clause 4). This document specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards. This standard also includes measures to consider reasonably foreseeable misuse. 1.4 This document is not applicable to machines which are manufactured before the date of publication of this document by CEN.
1.1 This document applies to concrete compactors and smoothing machines as defined in Clause 3 and illus-trated in Annex A and Annex B. This standard also applies for hand-held motor-operated concrete vibrators as defined in EN 60745-2-12:2003, but with the additional safety requirements for electronically controlled systems as defined in this standard (see 5.2.1.2). 1.2 This document does not deal with auxiliary equipment which provides the energy for internal and external vibrators, e.g. air compressors, hydraulic power sources and voltage transformers. This document does not apply to remote-controlled or portable smoothing machines and self-acting (robotic) smoothing machines. 1.3 This document deals with all significant hazards, hazardous situations and events relevant to concrete com-pactors and smoothing machines, when they are used as intended and under the conditions foreseen by the manu-facturer (see Clause 4). This document specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards. This standard also includes measures to consider reasonably foreseeable misuse. 1.4 This document is not applicable to machines which are manufactured before the date of publication of this document by CEN.
SIST EN 12649:2008/kprA1:2011 is classified under the following ICS (International Classification for Standards) categories: 91.220 - Construction equipment. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 12649:2008/kprA1:2011 has the following relationships with other standards: It is inter standard links to SIST EN 12649:2008+A1:2011, SIST EN 12649:2008. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN 12649:2008/kprA1:2011 is associated with the following European legislation: EU Directives/Regulations: 2006/42/EC; Standardization Mandates: M/396. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
SIST EN 12649:2008/kprA1:2011 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-april-2011
Stroji za komprimiranje in glajenje betona - Varnost
Concrete compactors and smoothing machines - Safety
Maschinen zum Verdichten und Glätten von Beton - Sicherheitsanforderungen
Compacteurs à béton et talocheuses - Prescriptions de sécurité
Ta slovenski standard je istoveten z: EN 12649:2008/FprA1
ICS:
91.220 Gradbena oprema Construction equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
FINAL DRAFT
EN 12649:2008
NORME EUROPÉENNE
EUROPÄISCHE NORM
FprA1
November 2010
ICS 91.220
English Version
Concrete compactors and smoothing machines - Safety
Compacteurs à béton et talocheuses - Prescriptions de Maschinen zum Verdichten und Glätten von Beton -
sécurité Sicherheitsanforderungen
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee
CEN/TC 151.
This draft amendment A1, if approved, will modify the European Standard EN 12649:2008. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 12649:2008/FprA1:2010: E
worldwide for CEN national Members.
Contents Page
Foreword .3
1 Modifications to the Foreword .4
2 Modification to 5.2.3, Safety requirements for vibrating beams .4
3 Modification to 5.2.4, Safety requirements for smoothing machines .4
4 Modifications to Clause 7, Information for use .5
5 Deletion of Annex ZA .5
6 Modifications to Annex ZB .5
Foreword
This document (EN 12649:2008/FprA1:201
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...