SIST EN 2713-008:2009
(Main)Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between - 55 °C and 200 °C - Part 008: Screened (braided) and jacketed, UV laser printable - Product standard
Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between - 55 °C and 200 °C - Part 008: Screened (braided) and jacketed, UV laser printable - Product standard
This standard specifies the characteristics of UV laser printable, single and multicore screened (braided) and jacketed electrical cables for use in the on-board electrical systems of aircraft, at operating temperatures between 55 °C and 200 °C.
It shall also be possible to mark these cables by hot stamp printing or ink jet printing.
These markings shall be in accordance with EN 3838.
This standard is not valid for new study.
Luft- und Raumfahrt - Leitungen, elektrisch, ein- und mehradrig, für allgemeine Verwendung - Betriebstemperaturen zwischen - 55 °C und 200 °C - Teil 008: Geschirmt (Umflechtung) und ummantelt, UV-Laser-bedruckbar - Produktnorm
Diese Norm legt die Eigenschaften von UV Laser bedruckbaren, ein und mehradrigen, geschirmten (Umflechtung) und ummantelten elektrischen Leitungen fest, die zur Verwendung in Bordnetzen von Luft¬fahrzeugen bei Betriebstemperaturen zwischen -55 °C und 200 °C bestimmt sind.
Es muss auch möglich sein, diese Leitungen mittels Heißprägung oder Tintenstrahldruck zu kennzeichnen.
Diese Kennzeichnungen müssen EN 3838 entsprechen.
Diese Norm gilt nicht für neue Untersuchungen.
Série aérospatiale - Câbles, électriques, mono et multiconducteurs d'usage général - Températures de fonctionnement comprises entre - 55 °C et 200 °C - Partie 008 : Blindés (tressés) et gainés, marquables au laser UV - Norme de produit
Aeronavtika - Eno- ali večžilni električni kabli za splošno uporabo - Delovne temperature med –55 °C in 200 °C - 008. del: Oklopljeni (opleteni) in oplaščeni, z možnostjo UV-laserskega tiskanja - Standard za proizvod
General Information
- Status
- Published
- Publication Date
- 13-Apr-2009
- Technical Committee
- I13 - Imaginarni 13
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 06-Apr-2009
- Due Date
- 11-Jun-2009
- Completion Date
- 14-Apr-2009
Overview
EN 2713-008:2006 is a CEN aerospace product standard that defines UV laser printable, screened (braided) and jacketed single‑ and multicore electrical cables for aircraft on‑board electrical systems. It covers cables with operating temperatures from −55 °C to 200 °C, specifies construction and materials, and requires compatibility with user‑applied marking methods (UV laser, hot‑stamp, ink‑jet) in accordance with EN 3838. Note: the published scope states “This standard is not valid for new study.”
Key topics and technical requirements
- Scope & use: single to four cores (1–4), intended for general-purpose on‑board aircraft wiring at −55 °C to 200 °C.
- Core construction: cores per EN 2266-003; 2–4 core cables shall be twisted per EN 2235; filler cores are not permitted.
- Screen (braid): nickel‑plated copper stranded braid; braid construction and strand dimensions per the standard and EN 2083; specified minimum overlaps (67% single‑wrap or two‑layer arrangement with 51% / 20% overlaps).
- Outer jacket: polyimide layer nominal 30 μm wall thickness, coated both sides with 2.5 μm fluorocarbon; top coat of dispersion fluorocarbon ≥15 μm to accept UV laser marking.
- Marking: UV laser printable; also compatible with hot‑stamp and ink‑jet marking methods. All markings must comply with EN 3838.
- Testing & performance: tests referenced to EN 3475‑100 and EN 2235, including visual, mass/dimensions, ohmic resistance, voltage proof, insulation resistance, accelerated ageing (250 ±5 °C), shrinkage/delamination, thermal shock, bending, cold‑bend, flammability (extinguishing time ≤ 3 s), thermal endurance 40 000 h at 200 °C, resistance to fluids, notch propagation (40 μm), scrape abrasion (specified needle forces by conductor size), plating continuity/adherence/thickness, smoke density and toxicity, strippability, screen pushback and marking permanence.
Applications and users
- Applications: high‑temperature aircraft wiring harnesses where EMI screening, tight space routing and durable, permanent identification (UV laser) are required - e.g., avionics, harnesses in engine bay or environmental control systems.
- Who uses it: cable manufacturers, aerospace OEMs, harness designers, procurement and quality assurance teams, test laboratories, and certification authorities responsible for aircraft electrical systems.
Related standards
- EN 2235 - screened and jacketed cables technical specification
- EN 2266-003 - ink‑jet printable cores / product standard
- EN 2713-002 - general screened and jacketed cable rules
- EN 2083 - copper conductors
- EN 3475-100 - cable test methods (general)
- EN 3838 - user‑applied markings on aircraft electrical cables
- EN 9133 - quality management / qualification for aerospace standard parts
Keywords: EN 2713-008:2006, aerospace cables, UV laser printable cable, screened braided cable, polyimide jacket, aircraft wiring, cable marking, high‑temperature electrical cable.
Frequently Asked Questions
SIST EN 2713-008:2009 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between - 55 °C and 200 °C - Part 008: Screened (braided) and jacketed, UV laser printable - Product standard". This standard covers: This standard specifies the characteristics of UV laser printable, single and multicore screened (braided) and jacketed electrical cables for use in the on-board electrical systems of aircraft, at operating temperatures between 55 °C and 200 °C. It shall also be possible to mark these cables by hot stamp printing or ink jet printing. These markings shall be in accordance with EN 3838. This standard is not valid for new study.
This standard specifies the characteristics of UV laser printable, single and multicore screened (braided) and jacketed electrical cables for use in the on-board electrical systems of aircraft, at operating temperatures between 55 °C and 200 °C. It shall also be possible to mark these cables by hot stamp printing or ink jet printing. These markings shall be in accordance with EN 3838. This standard is not valid for new study.
SIST EN 2713-008:2009 is classified under the following ICS (International Classification for Standards) categories: 49.060 - Aerospace electric equipment and systems. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 2713-008:2009 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Leitungen, elektrisch, ein- und mehradrig, für allgemeine Verwendung - Betriebstemperaturen zwischen - 55 °C und 200 °C - Teil 008: Geschirmt (Umflechtung) und ummantelt, UV-Laser-bedruckbar - ProduktnormSérie aérospatiale - Câbles, électriques, mono et multiconducteurs d'usage général - Températures de fonctionnement comprises entre - 55 °C et 200 °C - Partie 008 : Blindés (tressés) et gainés, marquables au laser UV - Norme de produitAerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between - 55 °C and 200 °C - Part 008: Screened (braided) and jacketed, UV laser printable - Product standard49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 2713-008:2006SIST EN 2713-008:2009en,de01-junij-2009SIST EN 2713-008:2009SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 2713-008
August 2006 ICS 49.060 English Version
Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between - 55 °C and 200 °C - Part 008: Screened (braided) and jacketed, UV laser printable - Product standard
Série aérospatiale - Câbles, électriques, mono et multiconducteurs d'usage général - Températures de fonctionnement comprises entre - 55 °C et 200 °C - Partie 008 : Blindés (tressés) et gainés, marquables au laser UV -Norme de produit
Luft- und Raumfahrt - Leitungen, elektrisch, ein- und mehradrig, für allgemeine Verwendung - Betriebstemperaturen zwischen - 55 °C und 200 °C - Teil 008: Geschirmt (Umflechtung) und ummantelt, UV Laser bedruckbar - Produktnorm This European Standard was approved by CEN on 19 May 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2006 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 2713-008:2006: ESIST EN 2713-008:2009
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...