SIST EN 12697-6:2004
(Main)Bituminous mixtures - Test methods for hot mix asphalt - Part 6: Determination of bulk density of bituminous specimens
Bituminous mixtures - Test methods for hot mix asphalt - Part 6: Determination of bulk density of bituminous specimens
This standard describes four procedures for determining the bulk density of a compacted bituminous specimen. By the described method the bulk density can be determined from specimens which are laboratory compacted or from cores cut from the pavement after placement and compacting. Four procedures are described; the choice of the procedure to be followed depends on the estimated content and accessibility of voids in the specimen.
Asphalt - Prüfverfahren für Heißasphalt - Teil 6: Bestimmung der Raumdichte von Asphalt-Probekörpern
Diese Europäische Norm beschreibt Prüfverfahren zur Bestimmung der Raumdichte von verdichteten Asphalt-Probekörpern. Diese Prüfverfahren sind für die Anwendung auf im Labor verdichtete Probekörper oder aus Bohrkernen hergestellte Probekörper vorgesehen, die zuvor einer Fahrbahndecke nach deren Einbau und Verdichtung entnommen wurden.
Diese Europäische Norm beschreibt die folgenden vier Verfahren, wobei die Entscheidung, welches von diesen anzuwenden ist, vom geschätzten Hohlraumgehalt und von dessen Zugänglichkeit im Probekörper abhängt:
a) Raumdichte - trocken (für Probekörper mit einer sehr dichten Oberfläche)
b) Raumdichte - gesättigte Oberfläche trocken (Saturated Surface Dry, SSD) (für Probekörper mit einer dichten Oberfläche)
c) Raumdichte - umhüllter Probekörper (für Probekörper mit einer offenen oder rauen Oberfläche)
d) Raumdichte durch Ausmessen (für Probekörper mit einer regelmäßigen Oberfläche und geometrischen Formen, z. B. Quadrate, Rechtecke, Zylinder usw.)
ANMERKUNG Anhang A (informativ) enthält grundsätzliche Hinweise zur Auswahl des zutreffenden Prüfverfahrens
Mélanges bitumineux - Méthodes d'essai pour enrobés a chaud - Partie 6: Détermination de la masse volumique apparente des éprouvettes bitumineuses
La présente Norme européenne décrit les méthodes d'essai pour la détermination de la masse volumique apparente de corps d'épreuve bitumineux après compactage. Les méthodes d'essai sont applicables à des éprouvettes compactées en laboratoire ou à des corps d'épreuve prélevés dans la chaussée après répandage et compactage.
La présente Norme européenne décrit quatre méthodes ci-après, le choix de chacune d'entre elles dépendant du volume de vides estimé et de leur accessibilité dans l'éprouvette :
a) masse volumique apparente - sèche (pour les éprouvettes présentant une surface très fermée) ;
b) masse volumique apparente - surface saturée sèche (SSS) (pour les éprouvettes présentant une surface fermée) ;
c) masse volumique apparente - éprouvette " paraffinée " (pour les éprouvettes présentant une surface ouverte ou grossière) ;
d) masse volumique apparente géométrique (pour les éprouvettes présentant une surface régulière et des faces de formes géométriques carrées, rectangulaires, cylindriques, etc.).
NOTE L'Annexe A (informative) donne des indications générales sur le choix de la méthode appropriée.
Bitumenske zmesi – Preskusne metode za vroče asfaltne zmesi – 6. del: Ugotavljanje gostote bitumenskih preskušancev
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Bituminous mixtures - Test methods for hot mix asphalt - Part 6: Determination of bulk density of bituminous specimensGHOMélanges bitumineux - Méthodes d'essai pour enrobés a chaud - Partie 6: Détermination de la masse volumique apparente des éprouvettes bitumineusesAsphalt - Prüfverfahren für Heißasphalt - Teil 6: Bestimmung der Raumdichte von Asphalt-ProbekörpernTa slovenski standard je istoveten z:EN 12697-6:2003SIST EN 12697-6:2004en93.080.20Materiali za gradnjo cestRoad construction materialsICS:SLOVENSKI
STANDARDSIST EN 12697-6:200401-junij-2004
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 12697-6March 2003ICS 93.080.20English versionBituminous mixtures - Test methods for hot mix asphalt - Part 6:Determination of bulk density of bituminous specimensMélanges bitumineux - Méthodes d'essai pour enrobés àchaud - Partie 6: Détermination de la masse volumiqueapparente des éprouvettes bitumineusesAsphalt - Prüfverfahren für Heißasphalt - Teil 6:Bestimmung der Raumdichte von Asphalt-ProbekörpernThis European Standard was approved by CEN on 21 November 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 12697-6:2003 E
General guidance on selection of a test procedure to determine the bulk densityof compacted bituminous materials.13Bibliography.16
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.