SIST EN 13167:2002

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Thermal insulation products for buildings - Factory made cellular glass (CG) products - SpecificationToplotnoizolacijski proizvodi za stavbe - Proizvodi iz penjenega stekla (CG) - SpecifikacijaProduits isolants thermiques pour le bâtiment - Produits manufacturés en verre cellulaire (CG) - SpécificationWärmedämmstoffe für Gebäude - Werkmäßig hergestellte Produkte aus Schaumglas (CG) - Spezifikation91.100.60Thermal and sound insulating materialsICS:SIST EN 13167:2002enTa slovenski standard je istoveten z:EN 13167:200101-marec-2002SIST EN 13167:2002SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13167May 2001ICS 91.100.60English versionThermal insulation products for buildings - Factory made cellularglass (CG) products - SpecificationProduits isolants thermiques pour le bâtiment - Produitsmanufacturés en verre cellulaire (CG) - SpécificationWärmedämmstoffe für Gebäude - Werkmäßig hergestellteProdukte aus Schaumglas (CG) - SpezifikationThis European Standard was approved by CEN on 16 April 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2001 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13167:2001 E

Page 2EN 13167:2001ContentsPageForeword.31Scope.42Normative references.43Terms, definitions, symbols, units and abbreviated terms.64Requirements.75Test methods.116Designation code.147Evaluation of conformity.158Marking and labelling.15Annex A (normative)
Determination of the declared values of thermal resistance andthermal conductivity.16Annex B (normative)
Factory production control.18Annex C (informative)
Preparation of the test specimens to measure thermal conductivity.21Annex D (informative)
Additional properties.22Annex ZA (informative)
Clauses of this European Standard addressing the provisions ofthe EU Construction Products Directive.24TablesTable 1 - Levels for deformation under point load.9Table 2 - Levels for compressive strength.10Table 3 - Levels for bending strength.10Table 4 - Test methods, test specimens and conditions.13Table A.1 - Values for k for one sided 90 % tolerance interval with a confidence level of 90 %.17Table B.1 - Minimum product testing frequencies.18Table B.2 - Minimum product testing frequencies for the reaction to fire characteristics.19Table D.1 - Test methods, test specimens, conditions and minimum testing frequencies.23Table ZA.1 - Relevant clauses.24Table ZA.2.1 - Systems of attestation of conformity of factory made products for any
intendeduse.25Table ZA.2.2 - Systems of attestation of conformity of factory made products for uses subjectto regulations on reaction to fire.26Table ZA.3 - Example CE marking information.28

Page 3EN 13167:2001ForewordThis European Standard has been prepared by Technical Committee CEN/TC 88 "Thermal insulatingmaterials and products", the secretariat of which is held by DIN.This European Standard shall be given the status of a national standard, either by publication of an identicaltext or by endorsement, at the latest by November 2001, and conflicting national standards shall bewithdrawn at the latest by March 2003.This European Standard has been prepared under a mandate given to CEN by the European Commissionand the European Free Trade Association, and supports essential requirements of EU Directive(s).For relationship with EU Directive(s), see informative annex ZA, which is an integral part of this standard.This European Standard contains five annexes:Annex A (normative)Determination of the declared values of thermal resistance and thermalconductivity;Annex B (normative)Factory production control;Annex C (informative)Preparation of the test specimens to measure thermal conductivity;Annex D (informative)Additional properties;Annex ZA (informative)Clauses of this European Standard addressing the provisions of theEU Construction Products Directive.This European Standard is one of a series of standards for insulation products used in buildings, but thisstandard may be used in other areas where appropriate.In pursuance of Resolution BT 20/1993 revised, CEN/TC 88 have proposed defining the standards listedbelow as a package of European Standards, setting (21 months after availability) as the date of withdrawal(dow) of national standards which conflict with the European Standards of this package.The package of standards comprises the following group of interrelated standards for the specifications offactory made thermal insulation products, all of which come within the scope of CEN/TC 88:EN 13162, Thermal insulating products for buildings - Factory made mineral wool (MW) products –Specification.EN 13163, Thermal insulating products for buildings - Factory made products of expandedpolystyrene (EPS) – Specification.EN 13164, Thermal insulating products for buildings - Factory made products of extruded polystyrene foam(XPS) – Specification.EN 13165, Thermal insulating products for buildings - Factory made rigid polyurethane foam(PUR) products- Specification.EN 13166, Thermal insulating products for buildings - Factory made products of phenolic foam (PF) –Specification.EN 13167, Thermal insulating products for buildings - Factory made cellular glass (CG) products –Specification.EN 13168, Thermal insulating products for buildings - Factory made wood wool (WW) products –Specification.EN 13169, Thermal insulating products for buildings - Factory made products of expanded perlite (EPB)–Specification.

Page 4EN 13167:2001EN 13170, Thermal insulating products for buildings - Factory made products of expanded cork (ICB) –Specification.EN 13171, Thermal insulating products for buildings - Factory made wood fibre (WF) products –Specification.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark,Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal,Spain, Sweden, Switzerland and the United Kingdom.1ScopeThis European Standard specifies the requirements for factory made cellular glass products, with or withoutfacings, which are used for the thermal insulation of buildings. The products are manufactured in the form ofboards or slabs.This standard describes product characteristics and includes procedures for testing, evaluation of conformity,marking and labelling.Products covered by this standard are also used in prefabricated thermal insulation systems and compositepanels; the performance of systems incorporating these products is not covered.This standard does not specify the required level of a given property to be achieved by a product todemonstrate fitness for purpose in a particular application. The levels required for a given application are tobe found in regulations or non-conflicting standards.Products with a declared thermal resistance lower than 0,50 m².K/W or a declared thermal conductivitygreater than 0,065 W/(m.K) at 10 °C are not covered by this standard.This standard does not cover products intended to be used for the insulation of building equipment andindustrial installations.This standard does not cover the following acoustical aspects: Direct airborne sound insulation and impactnoise transmission.2Normative referencesThis European Standard incorporates by dated or undated reference, provisions from other publications.These normative references are cited at the appropriate places in the text, and the publications are listedhereafter. For dated references, subsequent amendments to or revisions of any of these publications applyto this European Standard only when incorporated in it by amendment or revision. For undated referencesthe latest edition of the publication referred to applies (including amendments).EN ISO 354:1993/A1, Acoustics - Measurement of sound absorption in a reverberation room - Amendment1:Test specimen mountings for sound absorption tests (ISO 354:1985/AMD 1:1997).EN 822, Thermal insulating products for building applications - Determination of length and width.EN 823, Thermal insulating products for building applications - Determination of thickness.EN 824, Thermal insulating products for building applications - Determination of squareness.EN 825, Thermal insulating products for building applications - Determination of flatness.EN 826:1996, Thermal insulating products for building applications - Determination of compressionbehaviour.

Page 5EN 13167:2001prEN ISO 1182, Reaction to fire tests for building products – Non-combustibility test (ISO/DIS 1182:1998).EN 1603, Thermal insulating products for building applications - Determination of dimensional stability underconstant normal laboratory conditions (23 °C/50 % relative humidity).EN 1604, Thermal insulating products for building applications - Determination of dimensional stability underspecified temperature and humidity conditions.EN 1606, Thermal insulating products for building applications - Determination of compressive creep.EN 1607, Thermal insulating products for building applications - Determination of tensile strengthperpendicular to faces.EN 1608, Thermal insulating products for building applications - Determination of tensile strength parallel tofaces.EN 1609, Thermal insulating products for building applications - Determination of short term water absorptionby partial immersion.prEN ISO 1716, Reaction to fire tests for building products – Determination of calorific value (ISO/DIS1716:1998).prEN ISO 9229, Thermal insulation - Definitions of terms (ISO/DIS 9229:1997).EN ISO 11654, Acoustics - Sound absorbers for use in buildings - Rating of sound absorption (ISO11654:1997).prEN ISO 11925-2, Reaction to fire tests for building products – Part 2: Ignitability when subjected to directimpingement of flame (ISO/DIS 11925-2:1998).EN 12086:1997, Thermal insulating products for building applications - Determination of water vapourtransmission properties.EN 12087, Thermal insulating products for building applications - Determination of long term waterabsorption by immersion.EN 12089, Thermal insulating products for building applications - Determination of bending behaviour.EN 12430, Thermal insulating products for building applications - Determination of behaviour under pointload.prEN 12667, Thermal performance of building materials and products - Determination of thermal resistanceby means of guarded hot plate and heat flow meter methods - Products of high and medium thermalresistance.EN 12939, Thermal performance of building materials and products - Determination of thermal resistance bymeans of guarded hot plate and heat flow meter methods - Thick products of high and medium thermalresistance.EN 13172:2001, Thermal insulating products - Evaluation of conformity.prEN 13501-1, Fire classification of construction products and building elements – Part 1: Classification usingtest data from reaction to fire test.prEN 13820, Thermal insulating products for building applications – Determination of organic content.prEN 13823, Reaction to fire tests for building products – Building products excluding flooring exposed to thethermal attack by a single burning item.ISO 12491, Statistical methods for quality control of building materials and components.

Page 6EN 13167:20013Terms, definitions, symbols, units and abbreviated terms3.1Terms and definitionsFor the purposes of this standard, the following terms and definitions apply.3.1.1Terms and definitions as given in prEN ISO 92293.1.1.1cellular glassrigid insulation material made from expanded glass with a closed cell structure3.1.1.2board, slabrigid or semi-rigid (insulation) product of rectangular shape and cross section in which the thickness isuniform and substantially smaller than the other dimensions.NOTE
Boards are usually thinner than s
...