SIST EN 13169:2002

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Thermal insulation products for buildings - Factory made products of expanded perlite (EPB) - SpecificationToplotnoizolacijski proizvodi za stavbe - Proizvodi iz ekspandiranega perlita (EPB) - SpecifikacijeProduits isolants thermiques pour le bâtiment - Produits manufacturés en perlite expansée (EPB) - SpécificationWärmedämmstoffe für Gebäude - Werkmäßig hergestellte Produkte aus Blähperlit (EPB) - Spezifikation91.100.60Thermal and sound insulating materialsICS:SIST EN 13169:2002enTa slovenski standard je istoveten z:EN 13169:200101-marec-2002SIST EN 13169:2002SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13169May 2001ICS 91.100.60English versionThermal insulation products for buildings - Factory madeproducts of expanded perlite (EPB) - SpecificationProduits isolants thermiques pour le bâtiment - Produitsmanufacturés en perlite expansée (EPB) - SpécificationWärmedämmstoffe für Gebäude - Werkmäßig hergestellteProdukte aus Blähperlit (EPB) - SpezifikationThis European Standard was approved by CEN on 16 April 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2001 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13169:2001 E

Page 2EN 13169:2001ContentsPageForeword.31Scope.42Normative references.43Terms, definitions, symbols, units and abbreviated terms.54Requirements.75Test methods.116Designation code.157Evaluation of conformity.158Marking and labelling.16Annex A (normative)
Determination of the declared values of thermal resistance and thermalconductivity.17Annex B (normative)
Factory production control.19Annex C (normative)
Determination of the thermal conductivity in relation to moisture content.22Annex D (normative)
Composite insulation boards.24Annex E (informative)
Additional properties.28Annex ZA (informative)
Clauses of this European Standard addressing the provisions of the EUConstruction Products Directive.30TablesTable 1 – Thickness tolerances.8Table 2 – Levels for compressive stress or compressive strength.9Table 3 – Levels for deformation under specified compressive load and temperature.10Table 4 – Levels for water absorption by total immersion.10Table 5 – Levels for bending strength at constant span.11Table 6 – Test methods, test specimens and conditions.14Table A.1 – Values for k for one sided 90 % tolerance interval with a confidence level of 90 %.18Table B.1 – Minimum product testing frequencies.19Table B.2 – Minimum product testing frequencies for the reaction to fire characteristics.20Table D.1 – Classes for thickness tolerances.25Table D.2 – Levels of compressibility.25Table D.3 – Test methods, test specimens and conditions.26Table D.4 – Minimum product testing frequencies.27Table E.1 – Test methods, test specimens, conditions and testing frequencies.29Table ZA.1 – Relevant clauses.31Table ZA.2.1 – Systems of attestation of conformity of factory made products for any intended use.32Table ZA.2.2 – Systems of attestation of conformity of factory made products for uses subject toregulations on reaction to fire.33Table ZA.3 – Example CE marking information.35

Page 3EN 13169:2001ForewordThis European Standard has been prepared by the Technical Committee CEN/TC 88, «Thermal insulatingmaterials and products», the secretariat of which is held by DIN.This European Standard shall be given the status of a national standard, either by publication of an identical textor by endorsement, at the latest by November 2001, and conflicting national standards shall be withdrawn at thelatest by March 2003.This European Standard has been prepared under a mandate given to CEN by the European Commission andthe European Free Trade Association, and supports essential requirements of EU Directive(s).For relationship with EU Directive(s), see informative annex ZA, which is an integral part of this standard.This European Standard contains six annexes:Annex A (normative)Determination of the declared values of thermal resistance and thermalconductivity;Annex B (normative)Factory production control;Annex C (normative)Determination of the thermal conductivity in relation to moisture content;Annex D (normative)Composite insulation boards;Annex E (informative)Additional properties;Annex ZA (informative)Clauses of this European Standard addressing the provisions of the EUConstruction Products Directive.This European Standard is one of a series of standards for insulation products used in buildings, but thisstandard may be used in other areas where appropriate.In pursuance of Resolution BT 20/1993 Revised, CEN/TC 88 have proposed defining the standards listed belowas a package of European Standards, setting (21 months after availability) as the date of withdrawal (dow) ofnational standards which conflict with the European standards of this package.The package of standards comprises the following group of interrelated standards for the specifications offactory made thermal insulation products, all of which come within the scope of CEN/TC 88:EN 13162, Thermal insulation products for buildings – Factory made mineral wool (MW) products – Specification.EN 13163, Thermal insulation products for buildings – Factory made products of expanded polystyrene (EPS) –Specification.EN 13164, Thermal insulation products for buildings – Factory made products of extruded polystyrene foam (XPS)– Specification.EN 13165, Thermal insulation products for buildings – Factory made rigid polyurethane foam (PUR) products –Specification.EN 13166, Thermal insulation products for buildings – Factory made products of phenolic foam (PF) –Specification.EN 13167, Thermal insulation products for buildings – Factory made cellular glass (CG) products – Specification.EN 13168, Thermal insulation products for buildings – Factory made wood wool (WW) products –Specification.EN 13169, Thermal insulation products for buildings – Factory made products of expanded perlite (EPB) –Specification.EN 13170, Thermal insulation products for buildings – Factory made products of expanded cork (ICB) – Specification.EN 13171, Thermal insulation products for buildings – Factory made wood fibre (WF) products – Specification.

Page 4EN 13169:2001According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark,Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain,Sweden, Switzerland and the United Kingdom.1ScopeThis European Standard specifies the requirements for factory made products of expanded perlite, with orwithout facings or coatings, which are used for the thermal insulation of buildings. The products aremanufactured in the form of boards or multi-layered insulation.The standard also covers composite insulation boards (see annex D).The standard describes product characteristics and includes procedures for testing, evaluation of conformity,marking and labelling.Products covered by this standard are also used in prefabricated thermal insulating systems and compositepanels; the performance of systems incorporating these products is not covered.This standard does not specify the required level of a given property to be achieved by a product to demonstratefitness for purpose in a particular application. The levels required for a given application are to be found inregulations or non-conflicting standards.Products with a declared thermal resistance lower than 0,20 m2K/W or a declared thermal conductivity greaterthan 0,070 W/(mK) at 10 °C are not covered by this standard.This standard does not cover in situ insulation products and products intended to be used for the insulation ofbuilding equipment and industrial installations. This standard does not cover the following acoustical aspects:Acoustic absorption index and direct airborne sound insulation.2Normative referencesThis European Standard incorporates by dated or undated reference, provisions from other publications. Thesenormative references are cited at the appropriate places in the text, and the publications are listed hereafter. Fordated references, subsequent amendments to or revisions of any of these publications apply to this EuropeanStandard only when incorporated in it by amendment or revision. For undated references the latest edition of thepublication referred to applies (including amendments).EN 822, Thermal insulating products for building applications - Determination of length and width.EN 823, Thermal insulating products for building applications - Determination of thickness.EN 824, Thermal insulating products for building applications - Determination of squareness.EN 825, Thermal insulating products for building applications - Determination of flatness.EN 826, Thermal insulating products for building applications - Determination of compression behaviour.prEN ISO 1182, Reaction to fire tests for building products – Non-combustibility test (ISO/DIS 1182:1998).EN 1604, Thermal insulating products for building applications - Determination of dimensional stabilityunder specified temperature and humidity conditions.EN 1605, Thermal insulating products for building applications - Determination of deformation underspecified compressive load and temperature conditions.EN 1606, Thermal insulating products for building applications - Determination of compressive creep.EN 1607, Thermal insulating products for building applications - Determination of tensile strength perpendicularto faces.

Page 5EN 13169:2001EN 1609, Thermal insulating products for building applications - Determination of short term water absorption bypartial immersion.prEN ISO 1716, Reaction to fire tests for building products – Determination of calorific potential value (ISO/DIS1716:1998).prEN ISO 9229, Thermal insulation - Definition of terms (ISO/DIS 9229:1997).prEN ISO 11925-2, Reaction to fire tests for building products – Part 2: Ignitability when subjected to directimpingement of flame (ISO/DIS 11925-2:1998).EN 12086:1997, Thermal insulating products for building applications - Determination of water vapourtransmission properties.EN 12089, Thermal insulating products for building applications - Determination of bending behaviour.EN 12430, Thermal insulating products for building applications - Determination of behaviour under point load.EN 12431, Thermal insulating products for building applications - Determination of thickness for floating floorinsulating products.prEN 12667, Thermal performance of building materials and products - Determination of thermal resistance bymeans of guarded hot plate and heat flow meter methods – Products of high and medium thermal resistance.EN 12939, Thermal performance of building materials and products - Determination of thermal resistance bymeans of guarded hot plate and heat
...