SIST EN ISO 19116:2025

SLOVENSKI STANDARD
01-julij-2025
Nadomešča:
SIST EN ISO 19116:2020
SIST EN ISO 19116:2020/A1:2021
Geografske informacije - Lokacijske storitve (ISO 19116:2025)
Geographic information - Positioning services (ISO 19116:2025)
Geoinformationen - Positionierung (ISO 19116:2025)
Information géographique - Services de positionnement (ISO 19116:2025)
Ta slovenski standard je istoveten z: EN ISO 19116:2025
ICS:
07.040 Astronomija. Geodezija. Astronomy. Geodesy.
Geografija Geography
35.240.70 Uporabniške rešitve IT v IT applications in science
znanosti
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 19116
EUROPEAN STANDARD
NORME EUROPÉENNE
April 2025
EUROPÄISCHE NORM
ICS 35.240.70 Supersedes EN ISO 19116:2019, EN ISO
19116:2019/A1:2021
English Version
Geographic information - Positioning services (ISO
19116:2025)
Information géographique - Services de Geoinformation - Positionierungsdienste (ISO
positionnement (ISO 19116:2025) 19116:2025)
This European Standard was approved by CEN on 15 March 2025.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2025 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 19116:2025 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 19116:2025) has been prepared by Technical Committee ISO/TC 211
"Geographic information/Geomatics" in collaboration with Technical Committee CEN/TC 287
“Geographic Information” the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by October 2025, and conflicting national standards shall
be withdrawn at the latest by October 2025.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 19116:2019, EN ISO 19116:2019/A1:2021.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 19116:2025 has been approved by CEN as EN ISO 19116:2025 without any modification.

International
Standard
ISO 19116
Third edition
Geographic information —
2025-04
Positioning services
Information géographique — Services de positionnement
Reference number
ISO 19116:2025(en) © ISO 2025
ISO 19116:2025(en)
© ISO 2025
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
ISO 19116:2025(en)
Contents Page
Foreword .v
Introduction .vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Symbols, abbreviated terms, backwards compatibility, UML notation, and packages . 6
4.1 Symbols and abbreviated terms .6
4.2 Backwards compatibility .7
4.3 UML notation.7
4.4 Package abbreviations .7
5 Conformance . 7
5.1 Overview .7
5.2 Conformance requirements .8
5.3 Structure of requirements clauses .8
6 Positioning services model . 8
6.1 Overview .8
6.2 Static data structures of a positioning service .9
6.3 Basic and extended information from a positioning service .10
7 Basic information: definition and description .11
7.1 Overview .11
7.2 System information . 12
7.2.1 Overview . 12
7.2.2 PS_System. 13
7.2.3 System capability .14
7.2.4 Positioning technology .14
7.2.5 Referencing method . 15
7.2.6 Instrument identification . 15
7.3 Session information .16
7.3.1 Overview .16
7.3.2 PS_Session .16
7.4 Observation information .17
7.4.1 Overview .17
7.4.2 PS_ObservationMode .18
7.4.3 PS_LinkToReferenceSystem .21
7.4.4 PS_MeasurementType .21
7.4.5 Observation .21
7.4.6 Coordinate transfer (offset) values . 23
7.4.7 Offset vector . 25
7.4.8 PS_OffsetSourceType . 25
7.5 Quality information. 25
7.5.1 Overview . 25
7.5.2 PS_QualityMode .27
7.6 Positioning services operations . 28
7.6.1 Definition of positioning services operations . 28
7.6.2 Requirements for positioning service operations . 29
7.6.3 Applying th
...