SIST EN 14497:2004
(Main)Products and systems for the protection and repair of concrete structures - Test methods - Determination of the filtration stability
Products and systems for the protection and repair of concrete structures - Test methods - Determination of the filtration stability
This document describes a test method to determine the filtration stability of cementitious injection products. This test can also be used:
to check the filtration stability and workable time in situ with the used mixing equipment, mixing time and temperature.
for assessment of mixing stability and required mixing time, with the mixing equipment used.
Produkte und Systeme für den Schutz und die Instandsetzung von Betontragwerken - Prüfverfahren - Bestimmung der Eindringstabilität
Diese Europäische Norm beschreibt ein Prüfverfahren zur Bestimmung der Eindringstabilität von zementartigen Rissfüllstoffen.
Produits et systemes de protection et de réparation des structures en béton - Méthodes d'essai - Détermination de la stabilité de filtration
Le présent document décrit une méthode d'essai pour la détermination de la stabilité de filtration des produits d'injection à base de ciment. Cet essai peut aussi être utilisé :
- pour vérifier la stabilité de filtration et le temps d'utilisation in situ, avec le matériel de mélange, le temps de mélange et la température de mélange utilisés ;
pour évaluer la stabilité du mélange et le temps de mélange nécessaire, avec le matériel de mélange utilisé.
Proizvodi in sistemi za zaščito in popravilo betonskih konstrukcij – Preskusne metode – Določevanje stabilnosti filtracije
General Information
- Status
- Published
- Publication Date
- 30-Nov-2004
- Technical Committee
- BBB - Concrete, reinforced concrete and prestressed concrete
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 01-Dec-2004
- Due Date
- 01-Dec-2004
- Completion Date
- 01-Dec-2004
- Directive
- Harmonized Standard305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
Not Harmonized89/106/EEC - Construction products
Relations
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Refers
SIST EN 12503-2:2002 - Sports mats - Part 2: Pole vault and high jump mats, safety requirements - Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 22-Dec-2008
Overview
SIST EN 14497:2004 is a European Standard developed by the European Committee for Standardization (CEN). It specifies a test method for determining the filtration stability of cementitious injection products intended for the protection and repair of concrete structures. This method is essential for ensuring that products used in concrete repair and protection can effectively penetrate fine cracks and voids without clogging, thus contributing to the long-term durability and stability of concrete infrastructures.
Key Topics
- Filtration Stability: Refers to the ability of a cementitious injection product to pass through constrictions in the flow path and enter cracks without agglomeration, preventing blockages during injection.
- Test Principle: The product is tested using a suction filtration device equipped with woven metal wire cloth of specified mesh sizes. The volume of the injection product that passes through the mesh is measured to assess stability.
- Mesh Sizes: The test is performed with various mesh sizes (32 µm to 125 µm) to simulate different crack widths and conditions in concrete structures.
- Testing Conditions: Standard conditions include specific temperature ranges and humidity, ensuring repeatability and comparability of results.
- Applicability: The test can also evaluate mixing stability, workable time, and suitability of mixing equipment under site-specific conditions.
Applications
SIST EN 14497:2004 is widely used by manufacturers, laboratories, and infrastructure maintenance professionals involved in concrete repair, refurbishment, and structural protection. Its applications include:
- Quality Control for Repair Products: Ensures that injection materials for concrete structures meet necessary criteria for penetrability and stability.
- Assessing Mixing Equipment: Provides a method for checking whether user-selected mixing equipment and procedures yield stable, effective grout.
- Site Verification: Enables in situ checking of filtration stability and workable time under real project conditions, including equipment, temperature, and mixing time.
- Product Development and Certification: Supports manufacturers in qualifying new products for market by complying with harmonized European standards in the building and construction industry.
- Structural Maintenance and Protection: Guides engineers and contractors in selecting suitable cementitious products for crack injection, waterproofing, or strengthening of critical concrete elements.
Related Standards
SIST EN 14497:2004 is part of a suite of standards focused on products and systems for the protection and repair of concrete structures. Relevant related standards include:
- EN 1504 Series:
- EN 1504-1: Definitions, requirements, quality control, and evaluation of conformity for products and systems used in repair and protection of concrete structures.
- EN 1504-5: Details requirements and test methods specifically for concrete injection products.
- ISO 565: Specifies nominal sizes for test sieves, referenced in the filtration stability test procedure for mesh sizing.
- Other CEN Standards: Additional CEN documents cover products, application methods, and maintenance procedures for concrete structure repair and protection.
By following SIST EN 14497:2004, stakeholders in construction and infrastructure sectors ensure the reliability and effectiveness of injection products, contributing to safer, longer-lasting concrete structures while meeting European regulatory requirements.
Keywords: SIST EN 14497:2004, filtration stability, cementitious injection, concrete protection, repair products, European standard, CEN, concrete structures, test methods, crack injection, product certification.
Get Certified
Connect with accredited certification bodies for this standard
DIBt (Deutsches Institut für Bautechnik)
German Institute for Building Technology.
DIN CERTCO
DIN Group product certification.
Aboma Certification B.V.
Specialized in construction, metal, and transport sectors.
Sponsored listings
Frequently Asked Questions
SIST EN 14497:2004 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Products and systems for the protection and repair of concrete structures - Test methods - Determination of the filtration stability". This standard covers: This document describes a test method to determine the filtration stability of cementitious injection products. This test can also be used: to check the filtration stability and workable time in situ with the used mixing equipment, mixing time and temperature. for assessment of mixing stability and required mixing time, with the mixing equipment used.
This document describes a test method to determine the filtration stability of cementitious injection products. This test can also be used: to check the filtration stability and workable time in situ with the used mixing equipment, mixing time and temperature. for assessment of mixing stability and required mixing time, with the mixing equipment used.
SIST EN 14497:2004 is classified under the following ICS (International Classification for Standards) categories: 91.080.40 - Concrete structures. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 14497:2004 has the following relationships with other standards: It is inter standard links to SIST EN 1504-5:2005, SIST EN 1504-1:2002, SIST EN 12503-2:2002, SIST EN 1504-5:2013, SIST EN ISO 10211:2008, SIST EN 14497:2004/AC:2006. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN 14497:2004 is associated with the following European legislation: EU Directives/Regulations: 305/2011, 89/106/EEC; Standardization Mandates: M/128. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
SIST EN 14497:2004 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Produkte und Systeme für den Schutz und die Instandsetzung von Betontragwerken - Prüfverfahren - Bestimmung der EindringstabilitätProduits et systemes de protection et de réparation des structures en béton - Méthodes d'essai - Détermination de la stabilité de filtrationProducts and systems for the protection and repair of concrete structures - Test methods - Determination of the filtration stability91.080.40Betonske konstrukcijeConcrete structuresICS:Ta slovenski standard je istoveten z:EN 14497:2004SIST EN 14497:2004en01-december-2004SIST EN 14497:2004SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14497September 2004ICS 91.080.40 English versionProducts and systems for the protection and repair of concretestructures - Test methods - Determination of the filtrationstabilityProduits et systèmes pour la protection et la réparation desstructures en béton - Méthodes d'essai - Détermination dela stabilité de filtrationProdukte und Systeme für den Schutz und dieInstandsetzung von Betontragwerken - Prüfverfahren -Bestimmung der EindringstabilitätThis European Standard was approved by CEN on 16 April 2004.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2004 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14497:2004: ESIST EN 14497:2004
EN 14497: 2004 (E) 3 Foreword This document (EN 14497:2004) has been prepared by Technical Committee CEN/TC 104 “Concrete and related products”, the secretariat of which is held by DIN. It has been drafted by Sub-Committee 8 "Products and systems for the protection and repair of concrete structures" (Secretariat AFNOR). This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2005, and conflicting national standards shall be withdrawn at the latest by March 2005.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. SIST EN 14497:2004
to check the filtration stability and workable time in situ with the used mixing equipment, mixing time and temperature.
for assessment of mixing stability and required mixing time, with the mixing equipment used.
2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 1504-1:1998, Products and systems for the protection and repair of concrete structures — Definitions, requirements, quality control and evaluation of conformity — Part 1: Definitions. prEN 1504-5:2001, P
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...