SIST ETS 300 411 E1:2003
(Main)Transmission and Multiplexing (TM); Performance monitoring; Information model for the Network Element (NE) view
General Information
- Abstract
Agree an information model which describes in object-oriented terms a model for management of synchronous digital networks.
- Status
- Published
- Publication Date
- 30-Nov-2003
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 01-Dec-2003
- Due Date
- 01-Dec-2003
- Completion Date
- 01-Dec-2003
Overview
SIST ETS 300 411 E1:2003 is a Slovenian national standard, identical to the European ETS 300 411, established by the European Telecommunications Standards Institute (ETSI). It defines an information model for performance monitoring from the Network Element (NE) view within synchronous digital networks, specifically focusing on Synchronous Digital Hierarchy (SDH) systems.
The standard leverages object-oriented principles to describe managed object classes and their properties, facilitating effective network management and monitoring. Its aim is to allow telecommunication operators and equipment vendors consistent and interoperable performance data exchange and integration with management systems.
Key Topics
- Network Element (NE) Performance Monitoring: The standard outlines how NEs in an SDH network can be monitored for performance, including the management of errors, alarms, and quality of service.
- Object-Oriented Information Model: It proposes a modular, extensible model based on managed object classes, attributes, and name bindings specific to SDH network performance monitoring.
- Conformance to International Frameworks: The model aligns with well-established ITU-T recommendations (such as G.784 and Q.822) for performance management and leverages CCITT standards for network management architecture (including M.3010).
- Scope and Limitations:
- Defines the information model for the performance monitoring function in SDH
- Does not prescribe protocol stacks, network-level management processes, or application contexts
- Focuses solely on management at the element manager-to-element interface level
Applications
The SIST ETS 300 411 E1:2003 standard is applicable in several real-world scenarios:
- Network Performance Management: Supports the implementation of monitoring systems that gather and analyze SDH network performance data, helping operators maintain high service quality and quickly respond to faults.
- Telecommunications Management Systems (TMN): Provides a unified information model for integrating network element data into broader network management frameworks compliant with TMN principles.
- Equipment Vendor Interoperability: Facilitates the development of interoperable SDH network equipment, enabling seamless data exchange between different vendors' devices and management platforms.
- Regulatory and Compliance Reporting: Assists operators and service providers in meeting regulatory requirements for network performance monitoring, reporting, and fault management.
- Network Planning & Optimization: Offers a foundation for tools that assess current performance, identify bottlenecks, and support decision-making for network upgrades or reconfiguration.
Related Standards
SIST ETS 300 411 E1:2003 is closely connected with international and regional standards, ensuring broad compatibility and harmonization in telecommunications management:
- ITU-T Recommendation G.784: SDH management.
- ITU-T Recommendation Q.822: Performance management interface and mechanisms.
- CCITT Recommendation M.3010: Telecommunications Management Network framework.
- ITU-T Recommendation G.774.1: Performance monitoring for SDH NEs.
- ETS 300 304: SDH information model for the network element view.
- CCITT Recommendation M.2120: Maintenance and fault localization procedures.
For further reference, related standards such as ITU-T G.707, G.708, G.783, and the X.700 series on OSI management frameworks provide complementary guidance for network management and monitoring architectures.
Keywords: SDH performance monitoring, Network Element information model, transmission and multiplexing, telecommunication management, managed object classes, ETSI, ITU-T recommendations, network monitoring standards, TMN, SIST standard.
Get Certified
Connect with accredited certification bodies for this standard
ANCE
Mexican certification and testing association.
Intertek Slovenia
Intertek testing, inspection, and certification services in Slovenia.
LNE (Laboratoire National de Métrologie et d'Essais)
French national laboratory for metrology and testing.
Sponsored listings
Frequently Asked Questions
SIST ETS 300 411 E1:2003 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Transmission and Multiplexing (TM); Performance monitoring; Information model for the Network Element (NE) view". This standard covers: Agree an information model which describes in object-oriented terms a model for management of synchronous digital networks.
Agree an information model which describes in object-oriented terms a model for management of synchronous digital networks.
SIST ETS 300 411 E1:2003 is classified under the following ICS (International Classification for Standards) categories: 33.040.20 - Transmission systems. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST ETS 300 411 E1:2003 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-december-2003
Prenos in multipleksiranje (TM) – Informacijski model za nadzorovanje
zmogljivosti, gledano s strani omrežnega elementa (NE)
Transmission and Multiplexing (TM); Performance monitoring; Information model for the
Network Element (NE) view
Ta slovenski standard je istoveten z: ETS 300 411 Edition 1
ICS:
33.040.20 Prenosni sistem Transmission systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN ETS 300 411
TELECOMMUNICATION May 1995
STANDARD
Source: ETSI TC-TM Reference: DE/TM-02215
ICS: 33.080
Performance, information model, NE
Key words:
Transmission and Multiplexing (TM);
Performance monitoring information model
for the Network Element (NE) view
ETSI
European Telecommunications Standards Institute
ETSI Secretariat
F-06921 Sophia Antipolis CEDEX - FRANCE
Postal address:
650 Route des Lucioles - Sophia Antipolis - Valbonne - FRANCE
Office address:
c=fr, a=atlas, p=etsi, s=secretariat - secretariat@etsi.fr
X.400: Internet:
Tel.: +33 92 94 42 00 - Fax: +33 93 65 47 16
Copyright Notification: No part may be reproduced except as authorized by written permission. The copyright and the
foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 1995. All rights reserved.
New presentation - see History box
Page 2
ETS 300 411: May 1995
Whilst every care has been taken in the preparation and publication of this document, errors in content,
typographical or otherwise, may occur. If you have comments concerning its accuracy, please write to
"ETSI Editing and Committee Support Dept." at the address shown on the title page.
Page 3
ETS 300 411: May 1995
Contents
Foreword .5
1 Scope .7
2 Normative references.8
3 Abbreviations.8
4 Performance monitoring management model.8
5 Managed object class definitions .9
6 Packages.9
7 Attributes .10
8 Actions.10
9 Notifications.10
10 Parameters.10
11 Name bindings .11
Annex A (informative): Bibliography.12
History.14
Page 4
ETS 300 411: May 1995
Blank page
Page 5
ETS 300 411: May 1995
Foreword
This European Telecommunication Standard (ETS) has been produced by the Transmission and
Multiplexing (TM) Technical Committee of the European Telecommunications Standards Institute (ETSI).
This ETS describes the information model for Network Elements (NEs) for performance monitoring.
Proposed transposition dates
Date of latest announcement of this ETS (doa): 31 August 1995
Date of latest publication of new National Standard
or endorsement of this ETS (dop/e): 31 August 1995
Date of withdrawal of any conflicting National Standard (dow): 29 February 1996
Page 6
ETS 300 411: May 1995
Blank page
Page 7
ETS 300 411: May 1995
1 Scope
This European Telecommunication Standard (ETS) provides an information model for the performance
monitoring of Synchronous Digital Hierarchy (SDH) network. This model describes the managed object
classes and their properties for the performance monitoring function, as defined in CCITT
Recommendation G.784 [3] and as related to SDH Network Elements (NEs). These objects are useful to
describe information exchanged across interfaces defined in CCITT Recommendation M.3010 [5]
Telecommunications Management Network (TMN) architecture for the management of the performance
monitoring function.
SDH performance monitoring functions are used to monitor specified performance events of specified
termination points managed objects and to report these performance data, as well as quality of service
alarms to its managing system according to a given schedule.
CCITT Recommendation M.2120 [4] defines maintenance of transport network, CCITT Recommendation
G.784 [3] defines the management of SDH based NE. This ETS defines the object model based on ITU-T
Recommendation Q.822 [6] according to the requirements described in CCITT Recommendation
G.784 [3] and CCITT Recommendation M.2120 [4]. This model uses generic mechanism defined in ITU-T
Recommendation Q.822 [6].
This ETS defines:
- an information model, as related to the performance monitoring function for the Synchronous Digital
Hierarchy (SDH).
This ETS does not define:
- the protocol stack to be used for message communication;
- the network level management processes;
- the application contexts;
- the conformance requirements to be met by an implementation of this information model;
- information models for other systems or equipment.
The information model defined here (and the corresponding message set) is concerned with the
management of NEs, the equipment by which they are implemented and the functions contained within
them. More precisely, it applies to an equipment domain visible at the element manager to element
interface and is only concerned with information available within that domain. Information proper to the
domain of a network level management process is not included within this model.
Page 8
ETS 300 411: May 1995
2 Normative references
This ETS incorporates by dated and undated reference, provisions from other publications. These
normative references are cited at the appropriate places in the text and the publications are listed
hereafter. For dated references, subsequent amendments to or revisions of any of these publications
apply to this ETS only when incorporated in it by amendment or revision. For undated references the latest
edition of the publication referred to applies.
[1] ITU-T Recommendation G.709 (1993): "Synchronous multiplexing structure".
[2] ITU-T Recommendation G.774.1 (1994): "Synchronous digital hierarchy
(SDH)
...