SIST EN 13317:2003
(Main)Tanks for transport of dangerous goods - Service equipment for tanks - Manhole cover assembly
Tanks for transport of dangerous goods - Service equipment for tanks - Manhole cover assembly
This European Standard is applicable to manhole cover assembly and specifies the performance requirements, critical dimensions and tests necessary to verify the compliance of equipment to this standard. The equipment specified in this standard is suitable for use with liquid petroleum products and other dangerous substances of class3 (flammable liquids) of ADR- European Agreement concerning the International Carriage of Dangerous Goods by Road- which have a vapour pressure at 50°C not greater than 110kPa.
Tanks für die Beförderung gefährlicher Güter - Bedienungsausrüstung von Tanks - Baugruppe Deckel für Einsteigeöffnungen
Diese Europäische Norm gilt für die Baugruppe Mannlochdeckel und legt Leistungsanforderungen, entscheidende Maße sowie Prüfungen fest, die erforderlich sind um nachzuweisen, daß die Ausrüstung der vorliegenden Norm entspricht. Die in dieser Norm beschriebene Ausrüstung ist zum Umfüllen flüssiger Erdölerzeugnisse und anderer gefährlicher Güter der Klasse 3 (feuergefährliche Güter) geeignet, deren Dampfdruck bei 50 °C maximal 110 kPa beträgt und für deren Transport auf der Straße die ADR (European Agreement concerning the International Carriage of Dangerous Goods by Road) gilt.
Citernes destinées au transport de matieres dangereuses - Equipement de service pour citernes - Couvercles de trou d'homme
La présente Norme européenne s'applique aux couvercles de trou d'homme et spécifie les exigences de performance, les dimensions et les essais nécessaires pour vérifier la conformité du dispositif à la présente norme.
L'équipement spécifié par la présente norme convient à une utilisation avec des produits pétroliers liquides et autres matières dangereuses de la classe 3 de l'ADR - Accord européen relatif au transport international des marchandises dangereuses par route (liquides inflammables) dont la tension de vapeur ne dépasse pas 110 kPa à 50 °C (y compris l'essence) et qui n'appartiennent à aucune sous-classification des produits toxiques ou corrosifs.
Posode za prevoz nevarnih snovi - Obratovalna oprema za posode - Sklop pokrova vstopne odprtine
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Posode za prevoz nevarnih snovi - Obratovalna oprema za posode - Sklop pokrova vstopne odprtineTanks für die Beförderung gefährlicher Güter - Bedienungsausrüstung von Tanks - Baugruppe Deckel für EinsteigeöffnungenCiternes destinées au transport de matieres dangereuses - Equipement de service pour citernes - Couvercles de trou d'hommeTanks for transport of dangerous goods - Service equipment for tanks - Manhole cover assembly23.020.20Posode in vsebniki, montirani na vozilaVessels and containers mounted on vehicles13.300Varstvo pred nevarnimi izdelkiProtection against dangerous goodsICS:Ta slovenski standard je istoveten z:EN 13317:2002SIST EN 13317:2003en01-december-2003SIST EN 13317:2003SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13317October 2002ICS 13.300; 23.020.20English versionTanks for transport of dangerous goods - Service equipment fortanks - Manhole cover assemblyCiternes destinées au transport de matières dangereuses -Equipement de service pour citernes - Couvercles de troud'hommeTanks für die Beförderung gefährlicher Güter -Bedienungsausrüstung von Tanks - Baugruppe Deckel fürEinsteigeöffnungenThis European Standard was approved by CEN on 17 August 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13317:2002 ESIST EN 13317:2003
Drop test apparatus.10Annex B (normative)
Manhole cover assembly.11SIST EN 13317:2003
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.