SIST EN 12617-1:2003
(Main)Products and systems for the protection and repair of concrete structures - Test methods - Part 1: Determination of linear shrinkage for polymers and surface protection systems (SPS)
Products and systems for the protection and repair of concrete structures - Test methods - Part 1: Determination of linear shrinkage for polymers and surface protection systems (SPS)
This European Standard is one of a series dealing with products and systems for the protection and repair of concrete structure. It specifies a method for determining the linear shrinkage of solvent free multicomponent cold curing reactive resins. The method is not suitable for rubber elastic and very fast curing products.
Produkte und Systeme für den Schutz und die Instandsetzung von Betontragwerken - Prüfverfahren - Teil 1: Bestimmung des linearen Schrumpfens von Polymeren und Oberflächenschutzsystemen (OS)
Diese Europäische Norm legt ein Verfahren zur Bestimmung des linearen Schrumpfens von lösemittelfreien kalthärtenden Mehrkomponenten-Reaktionsharzen für den Schutz und die Instandsetzung von Betontrag-werken fest.
ANMERKUNG Das Verfahren ist nicht für Gummi, elastische und sehr schnell härtende Stoffe geeignet. Gummi und elastische Stoffe weisen Relaxationseffekte auf und können die Spannung auf den Untergrund ableiten. Bei der Prü-fung von sehr schnell härtenden Stoffen muss die Gebindeverarbeitbarkeitsdauer ausreichend lang zum Mischen und Herstellen der Probe-körper sein.
Produits et systemes pour la protection et la réparation des structures en béton - Méthodes d'essai - Partie 1 : Détermination du retrait linéaire des polymeres et des systemes de protection de surface (SPS)
La présente Norme européenne spécifie une méthode de détermination du retrait linéaire des résines réactives multicomposants durcissant à froid et exemptes de solvant, utilisées pour la protection et la réparation des structures en béton.
NOTE Cette méthode ne convient ni aux élastomères ni aux produits à durcissement très rapide. Les élastomères présentent des effets de relaxation permettant la dissipation des contraintes dans le sol. Pour l'essai des produits à durcissement très rapide, il convient que leur durée de vie en pot soit suffisamment longue pour permettre le mélange et la préparation des éprouvettes.
Proizvodi in sistemi za zaščito in popravilo betonskih konstrukcij - Preskusne metode – 1. del: Določevanje linearnega krčenja polimerov in sistemov za zaščito površine
General Information
- Status
- Published
- Publication Date
- 30-Nov-2003
- Technical Committee
- BBB - Concrete, reinforced concrete and prestressed concrete
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 01-Dec-2003
- Due Date
- 01-Dec-2003
- Completion Date
- 01-Dec-2003
- Directive
- Harmonized Standard305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
Not Harmonized89/106/EEC - Construction products
Relations
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 22-Dec-2008
- Effective Date
- 22-Dec-2008
Overview
SIST EN 12617-1:2003 is a European Standard developed by CEN that specifies a method for determining the linear shrinkage of solvent-free multicomponent cold curing reactive resins. These materials are widely used within products and systems for the protection and repair of concrete structures, including various surface protection systems (SPS). The standard outlines procedures that ensure consistent testing and reliable comparison of products, crucial for guaranteeing the long-term durability and performance of repairs and protective coatings on concrete.
This standard forms part of a series related to concrete repair and protection products, helping align practices across Europe and providing manufacturers, designers, and contractors with a unified approach to product characterization.
Key Topics
- Scope and Applicability: The method described in SIST EN 12617-1:2003 is designed for solvent-free, multicomponent cold curing resins and surface protection systems applied to concrete. It is not suitable for rubber, elastic materials, or very fast curing products due to their different physical behaviors under testing.
- Test Procedure: The standard includes detailed instructions for sampling, mixing, and curing the test materials, followed by measurements to determine the linear shrinkage after defined storage conditions.
- Measurement and Reporting: Results are calculated by comparing the cured length of the test sample to its original length, ensuring results are precise and repeatable. The standard specifies the information that must be included in the test report, such as material identification, test conditions, and results.
- Normative References: SIST EN 12617-1:2003 references other important standards, including EN 1504-1 (definitions and quality control for concrete repair products), EN ISO 15528 (sampling of paints and varnishes), and EN ISO 1513 (sample preparation for testing).
Applications
- Selection of Protective Coatings: Testing linear shrinkage is essential when choosing reactive resins or surface protection systems for concrete, as excessive shrinkage can lead to cracking, loss of adhesion, and premature failure.
- Quality Assurance and Product Comparison: Manufacturers and suppliers use this method to demonstrate compliance and consistency in resin formulations, offering transparency in performance to specifiers and end users.
- Product Certification and Regulatory Compliance: SIST EN 12617-1:2003 supports product certification schemes and helps ensure compliance with European and national regulations related to structural repairs and surface protection in construction projects.
- Contract Administration: Project managers and quality inspectors reference this standard during acceptance testing, ensuring that products delivered and applied on site meet specified performance criteria.
Related Standards
For a comprehensive approach to protective and repair systems for concrete structures, the following standards are closely related to SIST EN 12617-1:2003:
- EN 12617-2: Determination of shrinkage of polymers for injection products (volumetric shrinkage test).
- EN 12617-3: Determination of early age linear shrinkage for structural bonding agents.
- EN 12617-4: Testing for shrinkage and expansion of relevant products.
- EN 1504-1: Definitions, requirements, quality control, and evaluation of conformity for products and systems used in the protection and repair of concrete structures.
- EN ISO 15528 and EN ISO 1513: Procedures for sampling and preparation of samples for testing paints, varnishes, and similar products.
Adherence to SIST EN 12617-1:2003 ensures confidence in the durability and effectiveness of polymer-based surface protection systems, reinforcing best practices in the field of concrete repair and protection across Europe.
Get Certified
Connect with accredited certification bodies for this standard
DIBt (Deutsches Institut für Bautechnik)
German Institute for Building Technology.
DIN CERTCO
DIN Group product certification.
Aboma Certification B.V.
Specialized in construction, metal, and transport sectors.
Sponsored listings
Frequently Asked Questions
SIST EN 12617-1:2003 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Products and systems for the protection and repair of concrete structures - Test methods - Part 1: Determination of linear shrinkage for polymers and surface protection systems (SPS)". This standard covers: This European Standard is one of a series dealing with products and systems for the protection and repair of concrete structure. It specifies a method for determining the linear shrinkage of solvent free multicomponent cold curing reactive resins. The method is not suitable for rubber elastic and very fast curing products.
This European Standard is one of a series dealing with products and systems for the protection and repair of concrete structure. It specifies a method for determining the linear shrinkage of solvent free multicomponent cold curing reactive resins. The method is not suitable for rubber elastic and very fast curing products.
SIST EN 12617-1:2003 is classified under the following ICS (International Classification for Standards) categories: 91.080.40 - Concrete structures. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 12617-1:2003 has the following relationships with other standards: It is inter standard links to SIST EN 1504-1:2005, SIST EN ISO 1513:2011, SIST EN ISO 15528:2020, SIST EN 1504-2:2004, SIST EN 1504-4:2005; is excused to SIST EN 12617-3:2002, SIST EN 12617-4:2002. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN 12617-1:2003 is associated with the following European legislation: EU Directives/Regulations: 305/2011, 89/106/EEC; Standardization Mandates: M/128. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
SIST EN 12617-1:2003 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.SRYUãLQHProdukte und Systeme für den Schutz und die Instandsetzung von Betontragwerken - Prüfverfahren - Teil 1: Bestimmung des linearen Schrumpfens von Polymeren und Oberflächenschutzsystemen (OS)Produits et systemes pour la protection et la réparation des structures en béton - Méthodes d'essai - Partie 1 : Détermination du retrait linéaire des polymeres et des systemes de protection de surface (SPS)Products and systems for the protection and repair of concrete structures - Test methods - Part 1: Determination of linear shrinkage for polymers and surface protection systems (SPS)91.080.40Betonske konstrukcijeConcrete structuresICS:Ta slovenski standard je istoveten z:EN 12617-1:2003SIST EN 12617-1:2003en01-december-2003SIST EN 12617-1:2003SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 12617-1April 2003ICS 91.080.40English versionProducts and systems for the protection and repair of concretestructures - Test methods - Part 1: Determination of linearshrinkage for polymers and surface protection systems (SPS)Produits et systèmes pour la protection et la réparation desstructures en béton - Méthodes d'essai - Partie 1:Détermination du retrait linéaire des polymères et dessystèmes de protection de surfaceProdukte und Systeme für den Schutz und dieInstandsetzung von Betontragwerken - Prüfverfahren - Teil1: Bestimmung des linearen Schrumpfes von Polymerenund Oberflächenschutzsystemen (OS)This European Standard was approved by CEN on 3 March 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 12617-1:2003 ESIST EN 12617-1:2003
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...