Abstract

This part of IEC 60794 specifies the test procedures used to establish uniform requirements on abrasion resistance for optical fibre cables.
This document applies to optical fibre cables for use with telecommunication equipment and devices employing similar techniques, and to cables having a combination of both optical fibres and electrical conductors.
Method E2A evaluates the ability of the sheath to resist abrasion; method E2B evaluates the ability of cable markings (include text or graphic markers, and continuous coloured lines on cable) to resist abrasion.

Status
Published
Public Enquiry End Date
31-Mar-2025
Publication Date
17-Nov-2026
Technical Committee
MOC - Mobile Communications
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
10-Nov-2026
Due Date
15-Jan-2027
Completion Date
18-Nov-2026

Buy Documents

Standard

SIST EN IEC 60794-1-102:2027

English language (12 pages)
Preview
Preview
e-Library read for
×1 day

SIST EN IEC 60794-1-102:2027 is the Slovenian standard for the IEC abrasion test method for optical fibre cables. It specifies how to evaluate abrasion resistance of the cable sheath and, separately, cable markings on telecommunication cables and similar cables, including cables that combine optical fibres and electrical conductors. The document is used by manufacturers, test laboratories, and specifiers that need a common mechanical test and report format.

What does SIST EN IEC 60794-1-102:2027 specify?

SIST EN IEC 60794-1-102:2027 covers the mechanical test method E2 for abrasion in optical fibre cables. Clause 1 sets the scope, Clause 2 names the normative reference, Clause 3 covers terms and definitions, Clause 4 gives general requirements, and Clause 5 contains Method E2 with the E2A and E2B procedures. Figures 1 and 2 show typical test set-ups.

The document applies to optical fibre cables for use with telecommunication equipment and devices employing similar techniques, and to cables having both optical fibres and electrical conductors. E2A evaluates sheath abrasion resistance, while E2B evaluates the abrasion resistance of cable markings.

What are the key requirements of SIST EN IEC 60794-1-102:2027?

General test conditions

SIST EN IEC 60794-1-102:2027 requires the sample to be long enough for the test, with a typical length of 750 mm, and the surface to be cleaned gently and dried naturally before testing. Unless otherwise specified, the tests use the expanded test conditions defined in IEC 60794-1-2. In practice, that means the laboratory should control the test atmosphere and handle the sample consistently so the result is repeatable.

E2A - abrasion resistance of the sheath

Clause 5.4 defines E2A for sheath abrasion. The apparatus abrades the cable surface in both directions along the cable axis over a stroke of 40 mm at 55 cycles per minute, using a steel needle of 1.0 mm diameter unless the relevant specification says otherwise. The abrading edge is loaded with 4 N, and four tests are made with the sample moved 100 mm between tests and rotated 90 degrees in the same direction.

The requirement is simple: there shall be no perforation of the sheath after the tests. For a buyer or quality manager, that means the sheath must survive the specified rubbing action without being pierced.

E2B - abrasion resistance of markings

Clause 5.5 defines E2B for cable markings. Method 1 follows the E2A apparatus and procedure, but the test is applied to the markings. Method 2 uses a white wool felt instead of the needle, with a 100 mm stroke at 6 to 12 cycles per minute, and a normal force of 5 N unless the relevant specification states otherwise.

For Method 2, the wool felt is water-impregnated and the cable is moved back and forth under the felt. Four tests are made on four different cable markings. The requirement is that all markings remain legible after testing, so the printed or coloured identification must still be readable.

What the relevant specification has to state

SIST EN IEC 60794-1-102:2027 asks the relevant specification to state the number of cycles, the applied force if different, the needle diameter if different, and the stroke distance if different. For E2B it also asks for the method used. This is the part a product standard or customer specification uses to tailor the test to a given cable.

What the test report has to include

Clause 5.6 requires the report to identify the sample, the method used, the number of cycles, the applied force, the stroke distance, the needle diameter for E2A and E2B Method 1, the result, and any deviation from the procedure. That gives traceable evidence for internal qualification, supplier comparison, or type testing.

What terms does SIST EN IEC 60794-1-102:2027 define?

  • E2A - the abrasion test used to assess the cable sheath.
  • E2B - the abrasion test used to assess cable markings.
  • Abrading edge - the steel needle or equivalent contact element that rubs the cable in E2A and E2B Method 1.
  • Expanded test conditions - the atmospheric conditions to be used unless another condition is specified, as given in IEC 60794-1-2.
  • Wool felt - the white wiping material used in E2B Method 2 to rub the markings.
  • Markings - the text, graphic markers, and continuous coloured lines on the cable that are checked for abrasion resistance.

Who uses SIST EN IEC 60794-1-102:2027?

Cable manufacturers use SIST EN IEC 60794-1-102:2027 to qualify sheath materials and printed markings. Test laboratories use it to run abrasion checks in a repeatable way. Quality managers, buyers, and product specifiers use it when they need to state or verify the abrasion performance of optical fibre cables for telecommunications and similar applications.

What changed in SIST EN IEC 60794-1-102:2027 from the previous edition?

SIST EN IEC 60794-1-102:2027 replaces Method E2 of the first edition of IEC 60794-1-21 published in 2015. The foreword states that the mechanical tests from IEC 60794-1-21:2015+AMD1:2020 are now individually numbered in the IEC 60794-1-1xx series, so each test method is treated as its own document, with cross-reference details in IEC 60794-1-2.

Which standards are used with SIST EN IEC 60794-1-102:2027?

The only normative reference named in SIST EN IEC 60794-1-102:2027 is IEC 60794-1-2. It provides the general guidance, general requirements, and definitions used to apply this abrasion test method correctly.

What does the SIST EN IEC 60794-1-102:2027 document contain?

SIST EN IEC 60794-1-102:2027 contains the full test structure for abrasion of optical fibre cables, including apparatus descriptions, step-by-step procedures, acceptance requirements, and reporting items. It also includes two typical test set-up figures: one for E2A and E2B Method 1, and one for E2B Method 2. The document is intended for laboratory testing, product specification writing, and comparison of cable designs and supplier claims.

Relations

Effective Date
01-Jan-2027
Effective Date
01-Jan-2027
Effective Date
20-Oct-2026
Effective Date
10-Nov-2026
Effective Date
10-Nov-2026
Effective Date
10-Nov-2026
Effective Date
10-Nov-2026

Buy Documents

Standard

SIST EN IEC 60794-1-102:2027

English language (12 pages)
Preview
Preview
e-Library read for
×1 day

Get Certified

Connect with accredited certification bodies for this standard

ANCE

Mexican certification and testing association.

EMA Mexico Verified

Intertek Slovenia

Intertek testing, inspection, and certification services in Slovenia.

UKAS Slovenia Verified

LNE (Laboratoire National de Métrologie et d'Essais)

French national laboratory for metrology and testing.

COFRAC France Verified

Sponsored listings

Frequently Asked Questions

SIST EN IEC 60794-1-102:2027 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Optical fibre cables - Part 1-102: Generic specification - Basic optical cable test procedures - Mechanical tests methods - Abrasion, Method E2 (IEC 60794-1-102:2026)". This standard covers: This part of IEC 60794 specifies the test procedures used to establish uniform requirements on abrasion resistance for optical fibre cables. This document applies to optical fibre cables for use with telecommunication equipment and devices employing similar techniques, and to cables having a combination of both optical fibres and electrical conductors. Method E2A evaluates the ability of the sheath to resist abrasion; method E2B evaluates the ability of cable markings (include text or graphic markers, and continuous coloured lines on cable) to resist abrasion.

This part of IEC 60794 specifies the test procedures used to establish uniform requirements on abrasion resistance for optical fibre cables. This document applies to optical fibre cables for use with telecommunication equipment and devices employing similar techniques, and to cables having a combination of both optical fibres and electrical conductors. Method E2A evaluates the ability of the sheath to resist abrasion; method E2B evaluates the ability of cable markings (include text or graphic markers, and continuous coloured lines on cable) to resist abrasion.

SIST EN IEC 60794-1-102:2027 is classified under the following ICS (International Classification for Standards) categories: 33.180.10 - Fibres and cables. The ICS classification helps identify the subject area and facilitates finding related standards.

SIST EN IEC 60794-1-102:2027 has the following relationships with other standards: It is inter standard links to SIST EN 60794-1-21:2015/A1:2020, SIST EN 60794-1-21:2015, SIST EN IEC 60794-1-2:2021, SIST EN 3745-505:2018, SIST-TS CLC/TS 50621:2016, SIST EN IEC 62148-1:2018, kSIST FprEN IEC 60794-3-11:2026. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

SIST EN IEC 60794-1-102:2027 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.

Standards Content (Sample)


SLOVENSKI STANDARD
01-januar-2027
Nadomešča:
SIST EN 60794-1-21:2015
SIST EN 60794-1-21:2015/A1:2020
Optični kabli - 1-102. del: Splošna specifikacija - Osnovni preskusni postopki za
optične kable - Mehanske preskusne metode - Obraba, metoda E2 (IEC 60794-1-
102:2026)
Optical fibre cables - Part 1-102: Generic specification - Basic optical cable test
procedures - Mechanical tests methods - Abrasion, Method E2 (IEC 60794-1-102:2026)
Lichtwellenleiterkabel – Teil 1-102: Fachgrundspezifikation - Grundlegende
Prüfverfahren für Lichtwellenleiterkabel - Mechanische Prüfverfahren - Abrieb, Verfahren
E2 (IEC 60794-1-102:2026)
Câbles à fibres optiques - Partie 1-102: Spécification générique - Procédures
fondamentales d’essais des câbles optiques - Méthodes d’essais mécaniques -
Abrasion, méthode E2 (IEC 60794-1-102:2026)
Ta slovenski standard je istoveten z: EN IEC 60794-1-102:2026
ICS:
33.180.10 (Optična) vlakna in kabli Fibres and cables
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 60794-1-102

NORME EUROPÉENNE
EUROPÄISCHE NORM November 2026
ICS 33.180.10 Supersedes EN 60794-1-21:2015 (partially); EN 60794-1-
21:2015/A1:2020 (partially)
English Version
Optical fibre cables - Part 1-102: Generic specification - Basic
optical cable test procedures - Mechanical tests methods -
Abrasion, method E2
(IEC 60794-1-102:2026)
Câbles à fibres optiques - Partie 1-102: Spécification Lichtwellenleiterkabel - Teil 1-102: Fachgrundspezifikation -
générique - Procédures fondamentales d'essais des câbles Grundlegende Prüfverfahren für Lichtwellenleiterkabel -
optiques - Méthodes d'essais mécaniques - Abrasion, Mechanische Prüfverfahren - Abrieb, Verfahren E2
Méthode E2 (IEC 60794-1-102:2026)
(IEC 60794-1-102:2026)
This European Standard was approved by CENELEC on 2026-10-27. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2026 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 60794-1-102:2026 E

European foreword
The text of document 86A/2708/FDIS, future edition 1 of IEC 60794-1-102, prepared by SC 86A
"Fibres and cables" of IEC/TC 86 "Fibre optics" was submitted to the IEC-CENELEC parallel vote and
approved by CENELEC as EN IEC 60794-1-102:2026.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2027-11-30
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2029-11-30
document have to be withdrawn
This document partially supersedes EN 60794-1-21:2015 and all of its amendments and corrigenda (if
any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 60794-1-102:2026 was approved by CENELEC as a
European Standard without any modification.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cencenelec.eu.
Publication Year Title EN/HD Year
IEC 60794-1-2 - Optical fibre cables - Part 1-2: Generic EN IEC 60794-1-2 -
specification - Basic optical cable test
procedures - General guidance
IEC 60794-1-102 ®
Edition 1.0 2026-09
INTERNATIONAL
STANDARD
Optical fibre cables -
Part 1-102: Generic specification - Basic optical cable test procedures -
Mechanical tests methods - Abrasion, method E2
ICS 33.180.10  ISBN 978-2-8327-1493-5

IEC 60794-1-102:2026-09(en)
IEC 60794-1-102:2026 © IEC 2026
CONTENTS
FOREWORD. 2
INTRODUCTION . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 General requirements . 5
5 Object . 5
6 Sample . 5
7 Standard atmospheric conditions . 6
8 Method E2A: abrasion resistance of optical fibre cable sheaths . 6
8.1 Apparatus . 6
8.2 Procedure . 6
8.3 Requirements . 6
8.4 Details to be specified . 7
9 Method E2B: abrasion resistance of optical fibre cable markings . 7
9.1 Apparatus . 7
9.1.1 Method 1 . 7
9.1.2 Method 2 . 7
9.2 Procedure . 7
9.2.1 Method 1 . 7
9.2.2 Method 2 . 7
9.3 Requirements . 8
9.4 Details to be specified . 8
10 Details to be reported . 8

Figure 1 – Typical test set-up for tests E2A and E2B method 1 . 6
Figure 2 – Typical test set-up for test E2B, method 2 . 8

IEC 60794-1-102:2026 © IEC 2026
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
Optical fibre cables -
Part 1-102: Generic specification - Basic optical cable test procedures –
Mechanical test methods - Abrasion, method E2

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations f
...