Abstract

This part of IEC 60794 specifies the test procedures used to establish uniform requirements on abrasion resistance for optical fibre cables.
This document applies to optical fibre cables for use with telecommunication equipment and devices employing similar techniques, and to cables having a combination of both optical fibres and electrical conductors.
Method E2A evaluates the ability of the sheath to resist abrasion; method E2B evaluates the ability of cable markings (include text or graphic markers, and continuous coloured lines on cable) to resist abrasion.

Status
Published
Publication Date
05-Nov-2026
Current Stage
6060 - Document made available - Publishing
Start Date
06-Nov-2026
Due Date
30-Jan-2026
Completion Date
06-Nov-2026

Buy Documents

Standard

EN IEC 60794-1-102:2027

English language (12 pages)
Preview
Preview
e-Library read for
×1 day

EN IEC 60794-1-102:2026 is a CENELEC standard for optical fibre cables. It specifies the basic mechanical abrasion test method E2 for cable sheaths and cable markings, for use with telecommunication equipment and similar devices, including cables that combine optical fibres and electrical conductors. Engineers, cable manufacturers, test laboratories, and buyers use it to define and check abrasion resistance in a consistent way.

What does EN IEC 60794-1-102:2026 specify?

EN IEC 60794-1-102:2026 covers the abrasion test procedures for optical fibre cables and organizes them as a short test-method document. The main structure is Scope, Normative references, General requirements, and Method E2, with separate subsections for sheath abrasion and marking abrasion.

The document is focused on one mechanical property - abrasion - and splits the work into two cases:

  • E2A for abrasion resistance of optical fibre cable sheaths
  • E2B for abrasion resistance of cable markings, including text, graphic markers, and continuous coloured lines

Clause 1 limits the application to optical fibre cables used with telecommunication equipment and devices using similar techniques, and to hybrid cables with both optical fibres and electrical conductors. Clause 2 points readers to the general guidance in IEC 60794-1-2, which is needed to apply the test correctly.

What are the key requirements of EN IEC 60794-1-102:2026?

Sample preparation and test conditions

EN IEC 60794-1-102:2026 requires a sample long enough to carry out the test, with a typical length of 750 mm. The sample surface is to be cleaned gently with a soft wet towel and dried naturally before testing. In practice, this means the specimen should be prepared without damaging the sheath or markings before the abrasion test begins.

Unless otherwise specified, the test conditions follow the expanded test conditions defined in IEC 60794-1-2. That matters because the environmental state of the sample can affect abrasion performance.

E2A - sheath abrasion

EN IEC 60794-1-102:2026 defines an abrasion rig that moves an abrading edge parallel to the cable axis over a stroke of (40 ± 1) mm at (55 ± 5) cycles/min. The abrading edge is a steel needle with a diameter of 1.0 mm, unless the relevant specification says otherwise.

The sample is fixed to a supporting plate, loaded with 4 N, and tested four times, with the sample moved 100 mm between tests and rotated 90° in the same direction each time. The requirement is simple: there shall be no perforation of the sheath after testing. For users, this means the test is looking for actual penetration, not just surface wear.

E2B - marking abrasion

EN IEC 60794-1-102:2026 gives two ways to test cable markings. Method 1 uses the same apparatus as E2A, but the four tests are made on the markings. Method 2 uses white wool felt instead of a needle, with a 100 mm stroke at 6 to 12 cycles/min.

For Method 2, the felt is thoroughly impregnated with water and a normal force of 5 N is applied unless the relevant specification states otherwise. Four tests are made on four different markings. The pass condition is that all markings remain legible after testing. In practice, this checks whether printed identification stays readable after rubbing and handling.

What the relevant specification must state

EN IEC 60794-1-102:2026 requires the relevant specification to state test details such as the number of cycles, applied force if different from the stated value, needle diameter if different, stroke distance if different, and the method used for E2B. This is what allows product-specific adaptation without changing the core test method.

Reporting

EN IEC 60794-1-102:2026 requires the report to identify the sample, method used, number of cycles, force, stroke distance, needle diameter for E2A and E2B Method 1, the result, and any deviations from the procedure. That gives traceability for quality control, qualification, and dispute resolution.

What changed in EN IEC 60794-1-102:2026 from the previous edition?

EN IEC 60794-1-102:2026 is the first edition of IEC 60794-1-102 and replaces Method E2 from IEC 60794-1-21:2015. The foreword states that the mechanical tests previously contained in IEC 60794-1-21:2015+AMD1:2020 are now individually numbered in the IEC 60794-1-1xx series, with each test method treated as a separate document rather than part of a compendium.

Which standards are used with EN IEC 60794-1-102:2026?

  • IEC 60794-1-2 - provides the general guidance, general requirements, definitions, and cross-reference details needed to apply this test method correctly.

What does the EN IEC 60794-1-102:2026 document contain?

EN IEC 60794-1-102:2026 contains a test method description, apparatus descriptions, procedures, pass/fail requirements, and reporting items for abrasion testing. It also includes two typical test-set-up figures: one for E2A and E2B Method 1, and one for E2B Method 2.

The document is practical rather than broad: it is aimed at setting up the test, running the abrasion cycles, and recording the result. It is useful for product specification, laboratory testing, and conformity assessment of optical fibre cable sheaths and markings.

Relations

Effective Date
09-Sep-2025
Effective Date
09-Sep-2025
Effective Date
20-Oct-2026
Effective Date
10-Nov-2026
Effective Date
10-Nov-2026
Effective Date
10-Nov-2026
Effective Date
10-Nov-2026

Buy Documents

Standard

EN IEC 60794-1-102:2027

English language (12 pages)
Preview
Preview
e-Library read for
×1 day

Get Certified

Connect with accredited certification bodies for this standard

ANCE

Mexican certification and testing association.

EMA Mexico Verified

Intertek Slovenia

Intertek testing, inspection, and certification services in Slovenia.

UKAS Slovenia Verified

LNE (Laboratoire National de Métrologie et d'Essais)

French national laboratory for metrology and testing.

COFRAC France Verified

Sponsored listings

Frequently Asked Questions

EN IEC 60794-1-102:2026 is a standard published by CLC. Its full title is "Optical fibre cables - Part 1-102: Generic specification - Basic optical cable test procedures - Mechanical tests methods - Abrasion, method E2". This standard covers: This part of IEC 60794 specifies the test procedures used to establish uniform requirements on abrasion resistance for optical fibre cables. This document applies to optical fibre cables for use with telecommunication equipment and devices employing similar techniques, and to cables having a combination of both optical fibres and electrical conductors. Method E2A evaluates the ability of the sheath to resist abrasion; method E2B evaluates the ability of cable markings (include text or graphic markers, and continuous coloured lines on cable) to resist abrasion.

This part of IEC 60794 specifies the test procedures used to establish uniform requirements on abrasion resistance for optical fibre cables. This document applies to optical fibre cables for use with telecommunication equipment and devices employing similar techniques, and to cables having a combination of both optical fibres and electrical conductors. Method E2A evaluates the ability of the sheath to resist abrasion; method E2B evaluates the ability of cable markings (include text or graphic markers, and continuous coloured lines on cable) to resist abrasion.

EN IEC 60794-1-102:2026 is classified under the following ICS (International Classification for Standards) categories: 33.180.10 - Fibres and cables. The ICS classification helps identify the subject area and facilitates finding related standards.

EN IEC 60794-1-102:2026 has the following relationships with other standards: It is inter standard links to EN 60794-1-21:2015, EN 60794-1-21:2015/A1:2020, EN IEC 60794-1-2:2021, EN IEC 60794-3-11:2026, EN 3745-505:2018, CLC/TS 50621:2016, EN IEC 62148-1:2018. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

EN IEC 60794-1-102:2026 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.

Standards Content (Sample)


SLOVENSKI STANDARD
01-januar-2027
Nadomešča:
SIST EN 60794-1-21:2015
SIST EN 60794-1-21:2015/A1:2020
Optični kabli - 1-102. del: Splošna specifikacija - Osnovni preskusni postopki za
optične kable - Mehanske preskusne metode - Obraba, metoda E2 (IEC 60794-1-
102:2026)
Optical fibre cables - Part 1-102: Generic specification - Basic optical cable test
procedures - Mechanical tests methods - Abrasion, Method E2 (IEC 60794-1-102:2026)
Lichtwellenleiterkabel – Teil 1-102: Fachgrundspezifikation - Grundlegende
Prüfverfahren für Lichtwellenleiterkabel - Mechanische Prüfverfahren - Abrieb, Verfahren
E2 (IEC 60794-1-102:2026)
Câbles à fibres optiques - Partie 1-102: Spécification générique - Procédures
fondamentales d’essais des câbles optiques - Méthodes d’essais mécaniques -
Abrasion, méthode E2 (IEC 60794-1-102:2026)
Ta slovenski standard je istoveten z: EN IEC 60794-1-102:2026
ICS:
33.180.10 (Optična) vlakna in kabli Fibres and cables
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 60794-1-102

NORME EUROPÉENNE
EUROPÄISCHE NORM November 2026
ICS 33.180.10 Supersedes EN 60794-1-21:2015 (partially); EN 60794-1-
21:2015/A1:2020 (partially)
English Version
Optical fibre cables - Part 1-102: Generic specification - Basic
optical cable test procedures - Mechanical tests methods -
Abrasion, method E2
(IEC 60794-1-102:2026)
Câbles à fibres optiques - Partie 1-102: Spécification Lichtwellenleiterkabel - Teil 1-102: Fachgrundspezifikation -
générique - Procédures fondamentales d'essais des câbles Grundlegende Prüfverfahren für Lichtwellenleiterkabel -
optiques - Méthodes d'essais mécaniques - Abrasion, Mechanische Prüfverfahren - Abrieb, Verfahren E2
Méthode E2 (IEC 60794-1-102:2026)
(IEC 60794-1-102:2026)
This European Standard was approved by CENELEC on 2026-10-27. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2026 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 60794-1-102:2026 E

European foreword
The text of document 86A/2708/FDIS, future edition 1 of IEC 60794-1-102, prepared by SC 86A
"Fibres and cables" of IEC/TC 86 "Fibre optics" was submitted to the IEC-CENELEC parallel vote and
approved by CENELEC as EN IEC 60794-1-102:2026.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2027-11-30
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2029-11-30
document have to be withdrawn
This document partially supersedes EN 60794-1-21:2015 and all of its amendments and corrigenda (if
any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 60794-1-102:2026 was approved by CENELEC as a
European Standard without any modification.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cencenelec.eu.
Publication Year Title EN/HD Year
IEC 60794-1-2 - Optical fibre cables - Part 1-2: Generic EN IEC 60794-1-2 -
specification - Basic optical cable test
procedures - General guidance
IEC 60794-1-102 ®
Edition 1.0 2026-09
INTERNATIONAL
STANDARD
Optical fibre cables -
Part 1-102: Generic specification - Basic optical cable test procedures -
Mechanical tests methods - Abrasion, method E2
ICS 33.180.10  ISBN 978-2-8327-1493-5

IEC 60794-1-102:2026-09(en)
IEC 60794-1-102:2026 © IEC 2026
CONTENTS
FOREWORD. 2
INTRODUCTION . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 General requirements . 5
5 Object . 5
6 Sample . 5
7 Standard atmospheric conditions . 6
8 Method E2A: abrasion resistance of optical fibre cable sheaths . 6
8.1 Apparatus . 6
8.2 Procedure . 6
8.3 Requirements . 6
8.4 Details to be specified . 7
9 Method E2B: abrasion resistance of optical fibre cable markings . 7
9.1 Apparatus . 7
9.1.1 Method 1 . 7
9.1.2 Method 2 . 7
9.2 Procedure . 7
9.2.1 Method 1 . 7
9.2.2 Method 2 . 7
9.3 Requirements . 8
9.4 Details to be specified . 8
10 Details to be reported . 8

Figure 1 – Typical test set-up for tests E2A and E2B method 1 . 6
Figure 2 – Typical test set-up for test E2B, method 2 . 8

IEC 60794-1-102:2026 © IEC 2026
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
Optical fibre cables -
Part 1-102: Generic specification - Basic optical cable test procedures –
Mechanical test methods - Abrasion, method E2

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations f
...