SIST EN 13162:2002

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Thermal insulation products for buildings - Factory made mineral wool (MW) products - SpecificationToplotnoizolacijski proizvodi za stavbe - Proizvodi iz mineralne volne (MW) - SpecifikacijaProduits isolants thermiques pour le bâtiment - Produits manufacturés en laine minérale (MW) - SpécificationWärmedämmstoffe für Gebäude - Werkmäßig hergestellte Produkte aus Mineralwolle (MW) - Spezifikation91.100.60Thermal and sound insulating materialsICS:SIST EN 13162:2002enTa slovenski standard je istoveten z:EN 13162:200101-marec-2002SIST EN 13162:2002SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13162May 2001ICS 91.100.60English versionThermal insulation products for buildings - Factory made mineralwool (MW) products - SpecificationProduits isolants thermiques pour le bâtiment - Produitsmanufacturés en laine minérale (MW) - SpécificationWärmedämmstoffe für Gebäude - Werkmäßig hergestellteProdukte aus Mineralwolle (MW) - SpezifikationThis European Standard was approved by CEN on 16 April 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2001 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13162:2001 E

Page 2EN 13162:2001ContentsPageForeword.31Scope.42Normative references.43Terms, definitions, symbols, units and abbreviated terms.54Requirements.85Test methods.136Designation code.157Evaluation of conformity.158Marking and labelling.16Annex A
(normative)
Determination of the declared values of thermal resistanceand thermal conductivity.17Annex B
(normative)
Factory production control.19Annex C
(informative)
Additional properties.22Annex D (informative)
Examples for the determination of the declared values ofthermal resistance and thermal conductivity for a product or a product group.23Annex ZA
(informative)
Clauses of this European Standard addressing theprovisions of the EU Construction Products Directive.25TablesTable 1 - Level and classes for thickness tolerances.9Table 2 - Classes for thickness tolerances.11Table 3 - Levels for compressibility.12Table 4 - Test methods, test specimens and conditions.14Table A.1 - Values for k
for one sided 90 % tolerance interval with a
confidence levelof 90 %.18Table B.1 - Minimum product testing frequencies.19Table B.2 - Minimum product testing frequencies for the reaction to fire characteristics.20Table C.1 - Test methods, test specimens, conditions and minimum testing frequencies.22Table D.1 -
test results.23Table D.2 - R test results.24Table ZA.1 - Relevant clauses.26Table ZA.2.1 – Systems of attestation of conformity of factory made products for anyintended use.27Table ZA.2.2 – Systems of attestation of conformity of factory made products for usessubject to regulations on reaction to fire.27Table ZA.3 – Example CE marking information.29

Page 3EN 13162:2001ForewordThis European Standard has been prepared by Technical Committee CEN/TC 88 "Thermal insulating materials andproducts", the secretariat of which is held by DIN.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by November 2001, and conflicting national standards shall be withdrawn at the latestby March 2003.This European Standard has been prepared under a mandate given to CEN by the European Commission and theEuropean Free Trade Association, and supports essential requirements of EU Directive(s).For relationship with EU Directive(s), see informative annex ZA, which is an integral part of this standard.This European Standard contains five annexes:Annex A (normative) Determination of the declared values of thermal resistance and themal conductivityAnnex B (normative) Factory production control;Annex C (informative) Additional properties;Annex D (informative) Examples for the determination of the declared values of thermal resistance and thermalconductivity for a product or a product groupAnnex ZA
(informative) Clauses of this European Standard addressing the provisions of the EU ConstructionProducts Directive.This European Standard is one of a series of standards for insulation products used in buildings but this standardmay be used in other areas where appropriate.In pursuance of Resolution BT 20/1993 revised, CEN/TC 88 have proposed defining the standards listed below as apackage of European Standards, setting (21 months after availability) as the date of withdrawal (dow) of nationalstandards which conflict with the European Standards of this package.The package of standards comprises the following group of interrelated standards for the specifications of factorymade thermal insulation products, all of which come within the scope of CEN/TC 88:EN 13162, Thermal insulation products for buildings – Factory made mineral wool (MW) products –Specification.EN 13163, Thermal insulation products for buildings – Factory made products of expanded polystyrene (EPS) –Specification.EN 13164, Thermal insulation products for buildings – Factory made products of extruded polystyrene foam (XPS) – Specification.EN 13165, Thermal insulation products for buildings – Factory made rigid polyurethane foam (PUR) products –Specification.EN 13166, Thermal insulation products for buildings – Factory made products of phenolic foam (PF) – Specification.EN 13167, Thermal insulation products for buildings – Factory made cellular glass (CG) products – Specification.EN 13168, Thermal insulation products for buildings – Factory made wood wool (WW) products –Specification.EN 13169, Thermal insulation products for buildings – Factory made products of
expanded perlite (EPB) –Specification.EN 13170, Thermal insulation products for buildings – Factory made products of expanded cork (ICB) – Specification.EN 13171, Thermal insulation products for buildings – Factory made wood fibre (WF) products
– Specification.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden,Switzerland and the United Kingdom.

Page 4EN 13162:20011ScopeThis European Standard specifies the requirements for factory made mineral wool products, with or without facings,which are used for the thermal insulation of buildings. The products are manufactured in the form of rolls, batts,boards or slabs.This standard describes product characteristics and includes procedures for testing, evaluation of conformity,marking and labelling.Products covered by this standard are also used in prefabricated thermal insulation systems and composite panels;the performance of systems incorporating these products is not covered.This standard does not specify the required level of a given property to be achieved by a product to demonstratefitness for purpose in a particular application. The levels required for a given application are to be found in regulationsor non-conflicting standards.Products with a declared thermal resistance lower than 0,25 m²K/W or a declared thermal conductivity greaterthan 0,060 W/(mK) at 10 C are not covered by this standard.This standard does not cover in situ insulation products and products intended to be used for the insulation of buildingequipment and industrial installations.2Normative referencesThis European Standard incorporates by dated or undated reference, provisions from other publications. Thesenormative references are cited at the appropriate places in the text, and the publications are listed hereafter. Fordated references, subsequent amendments to or revisions of any of these publications apply to this EuropeanStandard only when incorporated in it by amendment or revision. For undated references the latest edition of thepublication referred to applies (including amendments).EN ISO 354:1993/A1, Acoustics – Measurement of sound absorption in a reverberation room - Amendment 1: Testspecimen mountings for sound absorption tests (ISO 354:1985/AMD 1:1997).EN 822, Thermal insulating products for building applications – Determination of length and width.EN 823, Thermal insulating products for building applications – Determination of thickness.EN 824, Thermal insulating products for building applications – Determination of squareness.EN 825, Thermal insulating products for building applications – Determination of flatness.EN 826, Thermal insulating products for building applications – Determination of compression behaviour.prEN ISO 1182, Reaction to fire tests for building products – Non-combustibility test (ISO/DIS 1182:1998).EN 1604, Thermal insulating products for building applications – Determination of dimensional stability underspecified temperature and humidity conditions.EN 1606, Thermal insulating products for building applications – Determination of compressive creep.EN 1607, Thermal insulating products for building applications – Determination of tensile strength perpendicular tofaces.EN 1608, Thermal insulating products for building applications – Determination of tensile strength parallel to faces.EN 1609, Thermal insulating products for building applications – Determination of short term water absorption bypartial immersion.prEN ISO 1716, Reaction to fire tests for building products – Determination of calorific value (ISO/DIS 1716:1998).

Page 5EN 13162:2001prEN ISO 9229, Thermal insulation – Definitions of terms (ISO/DIS 9229:1997).EN ISO 11654, Acoustics – Sound absorbers for use in buildings – Rating of sound absorption (ISO 11654:1997).prEN ISO 11925-2, Reaction to fire tests for building products – Part 2: Ignitability when subjected to directimpingement of flame (ISO/DIS 11925-2:1998).EN 12086:1997, Thermal insulating products for building applications – Determination of water vapour transmissionproperties.EN 12087, Thermal insulating products for building applications – Determination of long-term water absorption byimmersion.EN 12430, Thermal insulating products for building applications – Determination of the behaviour under point load.EN 12431, Thermal insulating products for building applications – Determination of thickness for floating floorinsulation products.prEN 12667, Building materials – Determination of thermal resistance by means of guarded hot plate and heat flowmeter methods – Products of high and medium thermal resistance.EN 12939, Thermal performance of building materials and products – Determination of thermal resistance by meansof guarded hot plate and heat flow meter methods – Thick products of high and medium thermal resistance.EN 13172:2001, Thermal insulating products – Evaluation of conformity.prEN 13501-1, Fire classification of construction products and building elements – Part 1: Classification using testdata from reaction to fire test.prEN 13820, Thermal insulating products for building applications – Determination of organic content.prEN 13823, Reaction to fire tests for building products – Building products excluding floorings exposed to thethermal attack by a single burning item.EN 29052-1, Acoustics – Determination of dynamic stiffness – Part 1: Materials used under floating floors indwellings.EN 29053, Acoustics – Materials for acoustical applications – Determination of air flow resistance (ISO 9053:1991).ISO 12491, Statistical methods for quality control of building materials and components.3Terms, definitions, symbols, units and abbreviated terms3.1Terms and definitionsFor the purpose of this standard, the following terms and definitions apply:3.1.1
Terms and definitions as given in prEN ISO 92293.1.1.1
mineral woolinsulation material having a
...