SIST EN 16617:2015
(Main)Pipework - Corrugated metal hose assemblies for combustible gas - Performance requirements, testing and marking
General Information
- Abstract
This European Standard specifies general requirements for material, design, manufacture, testing, marking and documentation of corrugated metal hose assemblies for gas of diameter up to DN 300 for gases of the 2nd and 3rd families according to EN 437.
This European Standard applies to:
Corrugated metal hose assemblies for gas for the supply of combustible gas and having a maximum operating pressure (MOP) less than or equal to 16 bar.
This European Standard does not apply to:
- corrugated metal hose assemblies for gas for engines including turbines and internal combustion engines as stated by Pressure Equipment Directive 97/23/EC;
- corrugated metal hose assemblies for the connection of domestic appliances using gaseous fuels according to EN 14800;
- corrugated metal hose assemblies for gas buried in earth;
- corrugated metal hose assemblies with non permanent detachable end fittings;
- stainless steel pliable corrugated tubing kits in buildings for gas with an operating pressure up to 0,5 bar (EN 15266).
Users of this European Standard should take into account national standards and existing code of practice in the country of destination.
- Status
- Published
- Publication Date
- 08-Jun-2015
- Technical Committee
- I13 - Imaginarni 13
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 15-May-2015
- Due Date
- 20-Jul-2015
- Completion Date
- 09-Jun-2015
Overview
EN 16617:2015 - published by CEN - defines performance requirements, testing and marking for corrugated metal hose assemblies used to supply combustible gas. It covers assemblies up to DN 300 for gases of the 2nd and 3rd families (natural gas and LPG, per EN 437) and a maximum operating pressure (MOP) ≤ 16 bar. The standard sets rules for material selection, design, manufacture, testing, marking, documentation, installation instructions and packaging for braided and unbraided corrugated metal hose assemblies.
Important exclusions: assemblies for engines/turbines (PED 97/23/EC), domestic appliance connectors covered by EN 14800, buried gas hoses, assemblies with non‑permanent detachable fittings, and stainless steel pliable tubing kits per EN 15266.
Key Topics
- Scope & Classification: Applies to corrugated metal hose assemblies for gas supply, classified per EN ISO 10380 types (e.g., Type 1‑50, 1‑10, 2‑10) and DN sizing.
- Materials: Specifies suitable materials (stainless steels, copper alloys, malleable cast iron, etc.) referenced to EN product standards to ensure weldability, corrosion resistance and gas compatibility.
- Design & Construction: Requirements for corrugated hose, braid, end fittings, ferrules, gaskets, external protection, minimum bending radius and electrical conductivity.
- Performance Tests: Mandatory tests include pressure resistance, leak‑tightness, high temperature resistance, elongation, impact, burst pressure, pliability/fatigue and electrical conductivity.
- Operational Limits: MOP ≤ 16 bar, DN ≤ 300; temperature derating above 50 °C per EN ISO 10380.
- Marking & Documentation: Permanent marking, labeling and documentation requirements for traceability, safe installation and maintenance.
- Installation & Packaging: Instructions for installation and protective packaging to preserve integrity during transport and storage.
- Conformity Activities: Includes self‑assessment reporting and correspondence with EN ISO 10380 tests.
Applications
Who uses EN 16617:2015 and why:
- Manufacturers of corrugated metal hose assemblies - to design and certify products for combustible gas supply.
- Testing laboratories and conformity assessors - to perform specified tests (pressure, leak, burst, fatigue).
- Gas utilities, installers and system specifiers - to select compliant flexible connectors for buildings, industrial plants and distribution systems.
- Purchasing and safety engineers - to verify marking, documentation, materials and installation instructions for safe operation at specified MOP and temperatures.
Practical notes:
- Always check national regulations and codes of practice in the destination country.
- Do not use EN 16617 assemblies for excluded applications (e.g., buried gas lines or engine connections) - consult the relevant standards.
Related Standards
- EN ISO 10380 (corrugated metal hoses & assemblies)
- EN 437 (test gases, appliance categories)
- EN 14800 (domestic appliance connectors)
- EN 15266 (pliant corrugated tubing kits)
- EN 1775, EN 10088, EN 12163/12166/12168 (material and gas supply references)
Keywords: EN 16617:2015, corrugated metal hose assemblies, combustible gas, performance requirements, testing and marking, DN 300, MOP 16 bar, EN ISO 10380, gas supply.
Relations
- Refers
SIST EN 10028-7:2016 - Flat products made of steels for pressure purposes - Part 7: Stainless steels - Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Refers
SIST EN ISO 7369:2004 - Pipework - Metal hoses and hose assemblies - Vocabulary (ISO 7369:2004) - Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Refers
SIST EN ISO 10380:2013 - Pipework - Corrugated metal hoses and hose assemblies (ISO 10380:2012) - Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
Get Certified
Connect with accredited certification bodies for this standard
Element Materials Technology
Materials testing and product certification.
Inštitut za kovinske materiale in tehnologije
Institute of Metals and Technology. Materials testing, metallurgical analysis, NDT.
Sponsored listings
Frequently Asked Questions
SIST EN 16617:2015 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Pipework - Corrugated metal hose assemblies for combustible gas - Performance requirements, testing and marking". This standard covers: This European Standard specifies general requirements for material, design, manufacture, testing, marking and documentation of corrugated metal hose assemblies for gas of diameter up to DN 300 for gases of the 2nd and 3rd families according to EN 437. This European Standard applies to: Corrugated metal hose assemblies for gas for the supply of combustible gas and having a maximum operating pressure (MOP) less than or equal to 16 bar. This European Standard does not apply to: - corrugated metal hose assemblies for gas for engines including turbines and internal combustion engines as stated by Pressure Equipment Directive 97/23/EC; - corrugated metal hose assemblies for the connection of domestic appliances using gaseous fuels according to EN 14800; - corrugated metal hose assemblies for gas buried in earth; - corrugated metal hose assemblies with non permanent detachable end fittings; - stainless steel pliable corrugated tubing kits in buildings for gas with an operating pressure up to 0,5 bar (EN 15266). Users of this European Standard should take into account national standards and existing code of practice in the country of destination.
This European Standard specifies general requirements for material, design, manufacture, testing, marking and documentation of corrugated metal hose assemblies for gas of diameter up to DN 300 for gases of the 2nd and 3rd families according to EN 437. This European Standard applies to: Corrugated metal hose assemblies for gas for the supply of combustible gas and having a maximum operating pressure (MOP) less than or equal to 16 bar. This European Standard does not apply to: - corrugated metal hose assemblies for gas for engines including turbines and internal combustion engines as stated by Pressure Equipment Directive 97/23/EC; - corrugated metal hose assemblies for the connection of domestic appliances using gaseous fuels according to EN 14800; - corrugated metal hose assemblies for gas buried in earth; - corrugated metal hose assemblies with non permanent detachable end fittings; - stainless steel pliable corrugated tubing kits in buildings for gas with an operating pressure up to 0,5 bar (EN 15266). Users of this European Standard should take into account national standards and existing code of practice in the country of destination.
SIST EN 16617:2015 is classified under the following ICS (International Classification for Standards) categories: 77.140.75 - Steel pipes and tubes for specific use. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 16617:2015 has the following relationships with other standards: It is inter standard links to SIST EN 10028-7:2016, SIST EN 1779:2000, SIST EN 12168:2024, SIST EN 12166:2024, SIST EN 14800:2007, SIST EN 10088-3:2024, SIST EN 437:2021, SIST EN 682:2002, SIST EN 1775:2008, SIST EN 12163:2024, SIST EN 10242:2026, SIST EN ISO 7369:2004, SIST EN 1562:2019, SIST EN ISO 10380:2013, SIST EN ISO 6708:1998. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN 16617:2015 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Rohrleitungen - Gewellte Metallschlauchleitungen für brennbare Gase - Leistungsanforderungen, Prüfung und KennzeichnungTuyauterie - Tuyauteries flexibles métalliques pour les gaz combustibles - Exigences de performances, essais et marquagePipework - Corrugated metal hose assemblies for combustible gas - Performance requirements, testing and marking77.140.75Jeklene cevi in cevni profili za posebne nameneSteel pipes and tubes for specific useICS:Ta slovenski standard je istoveten z:EN 16617:2015SIST EN 16617:2015en,fr,de01-julij-2015SIST EN 16617:2015SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 16617
April 2015 ICS 23.040.70 English Version
Pipework - Corrugated metal hose assemblies for combustible gas - Performance requirements, testing and marking
Tuyauterie - Tuyaux flexibles métalliques onduleux pour les gaz combustibles - Exigences de performances, essais et marquage
Rohrleitungen - Gewellte Metallschlauchleitungen für brennbare Gase - Leistungsanforderungen, Prüfung und Kennzeichnung This European Standard was approved by CEN on 5 March 2015.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 16617:2015 ESIST EN 16617:2015
Correspondence between the performance tests described by EN ISO 10380 and those of this European Standard . 18 Bibliography . 19
...