SIST EN 13164:2002
(Main)Thermal insulation products for buildings - Factory made products of extruded polystyrene foam (XPS) - Specification
Thermal insulation products for buildings - Factory made products of extruded polystyrene foam (XPS) - Specification
This European Standard specifies the requirements for factory made products of extruded polystyrene foam, with or without facings or coatings, which are used for thermal insulation of buildings. The products are manufactured in the form of boards, which are also available with special edge and surface treatment (tongue & groove, shiplap etc.). The standard also covers multilayered insulation boards and composite insulation boards in which extruded polystyrene foam is the main insulant. The standard describes product characteristics and includes procedures for testing, marking and labelling.
Wärmedämmstoffe für Gebäude - Werkmäßig hergestellte Produkte aus extrudiertem Polystyrolschaum (XPS) - Spezifikation
Diese Europäische Norm legt die Anforderungen für werkmäßig hergestellte extrudierte Polystyrolschaumprodukte mit oder ohne Kaschierung fest, die als Wärmedämmstoffe im Bauwesen verwendet werden. Die Produkte werden in Form von Platten hergestellt. Sie sind ebenso mit besonderer Klantenoder Oberflächenausbildung verfügbar (Nut und Federausbildung, Stufenfalz usw.) . Diese Norm beschreibt die Stoffeigenschaften und enthält die Prüfverfahren und Festlegungen für die Konformitätsbewertung, die Kennzeichnung und die Etikettierung. In dieser Norm beschriebene Produkte werden auch in vorgefertigten Wärmedämmsystemen und Mehrschicht-Verbundplatten angewendet; die Eigenschaften von Systemen, in die diese Produkte integriert sind, werden nicht behandelt. Diese Norm gilt auch für Produkte, die mehrlagig hergestellt werden. Diese Norm legt keine Anforderungsniveaus für eine vorgegebene Eigenschaft fest, die ein Produkt erreichen muss, um für einen bestimmten Anwendungsfall tauglich zu sein. Für bestimmte Anwendungen benötigte Anforderungen können Regelwerken oder übereinstimmenden Normen entnommen werden. Diese Norm gilt nicht für Produkte, deren Nennwert des Wärmedurchlasswiderstandes niedriger ist als 0,25 m² K/W oder deren Nennwert der Wärmeleitfähigkeit größer ist als 0,060 W (m . K) bei 10°C Mitteltemperatur. Diese Norm gilt nicht für in situ-Dämmstoffe und für P¨rodukte, die zur Dämmung von haustechnischen oder betriebstechnischen Anlagen bestimmt sind, und Produkte, die zur Schalldämmung bestimmt sind.
Produits isolants thermiques pour le bâtiment - Produits manufacturés en mousse de polystyrene extrudé (XPS) - Spécification
La présente Norme européenne spécifie les exigences auxquelles doivent satisfaire les produits manufacturés en mousse de polystyrène extrudé, avec ou sans parements ou revêtements, utilisés pour l'isolation thermique des bâtiments. Les produits sont fabriqués sous forme de panneaux qui sont également disponibles avec traitement spécial de leurs chants et surfaces (tenon et mortaise, feuillure, etc.).
La présente norme décrit les caractéristiques du produit et inclut les procédures d'essai, d'évaluation de la conformité, de marquage et d'étiquetage.
Les produits du domaine d'application de la présente norme sont également utilisés dans des systèmes d'isolation thermique et dans des panneaux composites préfabriqués ; la performance des systèmes dans lesquels entrent ces produits n'est pas définie. La norme porte également sur les panneaux multicouches d'isolation.
La présente norme ne spécifie pas, pour une propriété donnée, le niveau exigé que doit atteindre un produit pour démontrer son aptitude à l'emploi dans une application particulière. Les niveaux requis pour une application donnée figurent dans les réglementations ou normes non conflictuelles.
Les produits dont la résistance thermique déclarée à une température de 10 °C est inférieure à 0,25 m2K/W ou dont la conductivité thermique déclarée à une température de 10 °C est supérieure à 0,060 W/(m×K), ne sont pas du domaine d'application de la présente norme.
Les produits d'isolation mis en ¿uvre in situ, ceux destinés à être utilisés pour l'isolation des équipements du bâtiment et des installations industrielles ou ceux destinés à l'isolation acoustique ne sont pas du domaine d'application de la présente norme.
Toplotnoizolacijski proizvodi za stavbe - Proizvodi iz ekstrudiranega polistirena (XPS) - Specifikacija
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Thermal insulation products for buildings - Factory made products of extruded polystyrene foam (XPS) - SpecificationToplotnoizolacijski proizvodi za stavbe - Proizvodi iz ekstrudiranega polistirena (XPS) - SpecifikacijaProduits isolants thermiques pour le bâtiment - Produits manufacturés en mousse de polystyrene extrudé (XPS) - SpécificationWärmedämmstoffe für Gebäude - Werkmäßig hergestellte Produkte aus extrudiertem Polystyrolschaum (XPS) - Spezifikation91.100.60Thermal and sound insulating materialsICS:SIST EN 13164:2002enTa slovenski standard je istoveten z:EN 13164:200101-marec-2002SIST EN 13164:2002SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13164May 2001ICS 91.100.60English versionThermal insulation products for buildings - Factory madeproducts of extruded polystyrene foam (XPS) - SpecificationProduits isolants thermiques pour le bâtiment - Produitsmanufacturés en mousse de polystyrène extrudé (XPS) -SpécificationWärmedämmstoffe für Gebäude - Werkmäßig hergestellteProdukte aus extrudiertem Polystyrolschaum (XPS) -SpezifikationThis European Standard was approved by CEN on 16 April 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2001 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13164:2001 E
Page 2EN 13164:2001ContentsPageForeword.41Scope.52Normative references.53Terms, definitions, symbols, units, abbreviatiated terms.64Requirements.85Test methods.136Designation code.167Evaluation of Conformity.168Marking and labelling.17Annex A (normative)
Determination of the declared values of thermal resistanceand thermal conductivity.18Annex B (normative)
Factory Production Control.20Annex C (normative)
Determination of the aged values of thermal resistance andthermal conductivity.23Annex D (informativ)
Additional Properties.27Annex E (Informative)
Plan for cutting test specimen.29Annex Z.A (informative)
Clauses of this European Standard adressing theprovisions of the EU Construction Products Directive.31TablesTable 1 – Tolerances of length, width, squareness and flatness.9Table 2 – Classes for thickness tolerances.10Table 3 – Levels for compressive stress or compressive strength.10Table 4 – Levels for deformation under specified compressive load and temperature conditions11Table 5 – Levels for tensile strength, perpendicular to faces.11Table 6 – Levels for long term water absorption by total immersion.12Table 7 – Levels for long term water absorption by diffusion.13Table 8 – Levels for freeze-thaw resistance.13Table 9
– Test methods, test specimens and conditions.15Table A.1 – Values of k for one sided 90% tolerance interval with a confidence level of 90%.19Table B.1 – Minimum product testing frequencies.20Table B.2 – Minimum product testing frequencies for the reaction to fire characteristics.21Table D.1 – Test methods, test specimens, conditions
and minimum testing frequencies.28Table ZA.1 – Relevant clauses.32Table ZA.2.1 – Systems of attestation of conformity of factory made products forany intended use.33
Page 3EN 13164:2001Table ZA.2.2 – Systems of attestation of conformity of factory made products for uses subject toregulations on reaction to fire.33Table ZA.3 – Example CE marking information.35
Page 4EN 13164:2001ForewordThis European Standard has been prepared by Technical Committee CEN/TC 88 "Thermal insulating materialsand products", the secretariat of which is held by DIN.This European Standard shall be given the status of a national standard, either by publication of an identical textor by endorsement, at the latest by November 2001, and conflicting national standards shall be withdrawn at thelatest by March 2003.This European Standard has been prepared under a mandate given to CEN by the European Commission andthe European Free Trade Association, and supports essential requirements of EU Directive(s).For relationship with EU Directive(s), see informative annex ZA, which is an integral part of this standard.This European Standard contains six annexes :Annex A
(normative)Determination of the declared values of thermal resistanceand thermal conductivity;Annex B
(normative)Factory production control;Annex C
(normative)Determination of aged values of thermal resistance andthermal conductivity;Annex D (informative)Additional properties;Annex E (informative)Plan for cutting test specimen;Annex ZA
(informative)Clauses of this European Standard addressing theprovisions of the EU Construction Products Directive;This European Standard is one of a series of standards for insulating products used in buildings, but thisstandard may be used in other areas where appropriate.In pursuance of resolution BT 20/1993 revised, CEN/TC88 have proposed defining the standards listed belowas a package of European Standards, setting (21 months after availability) as the date of withdrawal (dow) ofnational standards which conflict with the European Standards of this package.The package of standards comprises the following group of interrelated standards for the specifications offactory made thermal insulation products; all of which come within the scope of CEN/TC88:EN 13162, Thermal insulation products for buildings – Factory made mineral wool (MW) products –Specification.EN 13163, Thermal insulation products for buildings – Factory made products of expandedpolystyrene (EPS) – Specification.EN 13164, Thermal insulation products for buildings – Factory made products of extruded polystyrenefoam (XPS) – Specification.EN 13165, Thermal insulation products for buildings – Factory made rigid polyurethane foam(PUR) products –Specification.EN 13166, Thermal insulation products for buildings – Factory made products of phenolic foam (PF) –Specification.EN 13167, Thermal insulation products for buildings – Factory made cellular glass (CG) products – Specification.EN 13168, Thermal insulation products for buildings – Factory made wood wool (WW) products –Specification.
Page 5EN 13164:2001EN 13169, Thermal insulation products for buildings – Factory made products of expanded perlite (EPB) –Specification.EN 13170, Thermal insulation products for buildings – Factory made products of expanded cork (ICB) –Specification.EN 13171, Thermal insulation products for buildings – Factory made wood fibre (WF) products
–Specification.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark,Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain,Sweden, Switzerland and the United Kingdom.1ScopeThis European Standard specifies the requirements for factory made products of extruded polystyrene foam,with or without facings or coatings, which are used for thermal insulation of buildings. The products aremanufactured in the form of boards, which are also available with special edge and surface treatment (tongue &grooves, shiplap etc.).This standard describes product characteristics and includes procedures for testing, evaluation of conformity,marking and labelling.Products covered by this standard are also used in prefabricated thermal insulating systems and compositepanels; the performance of systems incorporating these products is not covered. The standard also coversmultilayered insulation boards.The standard does not specify the required level of a given property to be achieved by a product to demonstratefitness for purpose in a particular application. The levels required for a given application are to be found inregulations or non-conflicting standards.Products with a declared thermal resistance lower than 0,25 m²K/W or a declared thermal conductivity greaterthan 0,060 W/(mK) at 10 C are not covered by this standard.This standard does not cover in situ insulation products and products intended to be used for the insulation ofbuilding equipment and industrial installations or products intended for acoustic insulation.2Normative referencesThis European Standard incorporates by dated or undated reference, provisions from other publications. Thesenormative references are cited at the appropriate places in the text and the publications are listed hereafter. Fordated references subsequent amendments to or revisions of any of these publications apply to this EuropeanStandard only when incorporated in it by amendment or revision. For undated references the latest edition of thepublication referred to applies (including amendments).EN 822, Thermal insulating products for building applications - Determination of length and width.EN 823, Thermal insulating products for building applications - Determination of thickness.EN 824, Thermal insulating products for building applications - Determination of squareness.EN 825, Thermal insulating products for building applications - Determination of flatness.EN 826, Thermal insulating products for building applications - Determination of compression behaviour.prEN ISO 1182, Reaction to fire tests for building products – Non-combustibility test (ISO/DIS 1182:1998).EN 1604, Thermal insulating products for building applications - Determination of dimensional stability underspecified temperature and humidity conditions.
Page 6EN 13164:2001EN 1605, Thermal insulating products for building applications - Determination of deformation under specifiedcompressive load and temperature condition.EN 1606, Thermal insulating products for building applications - Determination of compressive creep.EN 1607, Thermal insulating products for building applications - Determination of tensile strength perpendicularto faces.prEN ISO 1716, Reaction to fire tests for building products – Determination of calorific value (ISO/DIS1716:1998).prEN ISO 9229, Thermal insulation – Definitions of terms (ISO/DIS 9229:1997).prEN ISO 11925-2, Reaction to fire tests for building products – Part 2: Ignitability when subjected to directimpingement of flame (ISO/DIS 11925-2:1998).EN 12086:1997, Thermal insulating products for building applications - Determination of water vapourtransmission properties.EN 12087, Thermal insulating products for building applications - Determination of long term water absorptionby immersion.EN 12088, Thermal insulating products for building applications - Determination of long term water absorptionby diffusion.EN 12091, Thermal insulating products for building applications - Determination of freeze-thaw resistance.prEN 12667, Thermal performance of building materials and products - Determination of thermal resistance bymeans of guarded hotplate and heat flow meter methods – Products of high and medium thermal resistance.EN 12939, Thermal performance of building materials and products – Determination of thermal resistanceby means of guarded hot plate and heat flow meter methods – Thick products of high and medium thermalresistance.prEN 13172:2001, Thermal insulating products – Evaluation of conformity.prEN 13501-1, Fire classification of construction products and building elements – Part 1: Classificationusing test data from reaction to fire test.prEN 13820, Thermal insulating products for building applications – Determination of organic content.prEN 13823, Reaction to fire tests for building products – Building products excluding floorings exposed tothe thermal attack by a single burning item.ISO 12491, S
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.