SIST EN IEC 60350-1:2023/A1:2025

SLOVENSKI STANDARD
01-julij-2025
Gospodinjski električni kuhalni aparati - 1. del: Štedilniki, pečice, parne pečice in
žari - Metode za merjenje funkcionalnosti - Dopolnilo A1 (IEC 60350-
1:2023/AMD1:2025)
Household electric cooking appliances - Part 1: Ranges, ovens, steam ovens and grills -
Methods for measuring performance (IEC 60350-1:2023/AMD1:2025)
Elektrische Kochgeräte für den Hausgebrauch - Teil 1: Herde, Backöfen, Dampfgarer
und Grills - Verfahren zur Messung der Gebrauchseigenschaften (IEC 60350-
1:2023/AMD1:2025)
Appareils de cuisson électrodomestiques - Partie 1: Cuisinières, fours, fours à vapeur et
grils - Méthodes de mesure de l'aptitude à la fonction (IEC 60350-1:2023/AMD1:2025)
Ta slovenski standard je istoveten z: EN IEC 60350-1:2023/A1:2025
ICS:
97.040.20 Štedilniki, delovni pulti, Cooking ranges, working
pečice in podobni aparati tables, ovens and similar
appliances
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 60350-1:2023/A1

NORME EUROPÉENNE
EUROPÄISCHE NORM May 2025
ICS 97.040.20
English Version
Household electric cooking appliances - Part 1: Ranges, ovens,
steam ovens and grills - Methods for measuring performance
(IEC 60350-1:2023/AMD1:2025)
Appareils de cuisson électrodomestiques - Partie 1: Elektrische Kochgeräte für den Hausgebrauch - Teil 1:
Cuisinières, fours, fours à vapeur et grils - Méthodes de Herde, Backöfen, Dampfgarer und Grills - Verfahren zur
mesure de l'aptitude à la fonction Messung der Gebrauchseigenschaften
(IEC 60350-1:2023/AMD1:2025) (IEC 60350-1:2023/AMD1:2025)
This amendment A1 modifies the European Standard EN IEC 60350-1:2023; it was approved by CENELEC on 2025-05-12. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2025 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 60350-1:2023/A1:2025 E

European foreword
The text of document 59K/410/FDIS, future edition 3 of IEC 60350-1/AMD1, prepared by SC 59K
"Performance of household and similar electrical cooking appliances" of IEC/TC 59 "Performance of
household and similar electrical appliances" was submitted to the IEC-CENELEC parallel vote and
approved by CENELEC as EN IEC 60350-1:2023/A1:2025.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2026-05-31
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2028-05-31
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 60350-1:2023/AMD1:2025 was approved by CENELEC as
a European Standard without any modification.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cencenelec.eu.
Add the following reference:
Publication Year Title EN/HD Year
IEC 60705 2024 Household microwave ovens - Methods for EN IEC 60705 2024
measuring performance
Replace the following reference:
IEC 62301 - Household electrical appliances - EN 50564 -
Measurement of standby power
Delete the footnote to IEC 63474 and EN IEC 63474.

Revised by prEN IEC 62301:2025.
IEC 60350-1 ®
Edition 3.0 2025-04
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
AMENDMENT 1
AMENDEMENT 1
Household electric cooking appliances –

Part 1: Ranges, ovens, steam ovens and grills – Methods for measuring

performance
Appareils de cuisson électrodomestiques –

Partie 1: Cuisinières, fours, fours à vapeur et grils – Méthodes de mesure de

l'aptitude à la fonction
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 97.040.20  ISBN 978-2-8327-0310-6

– 2 – IEC 60350-1:2023/AMD1:2025
© IEC 2025
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
HOUSEHOLD ELECTRIC COOKING APPLIANCES –

Part 1: Ranges, ovens, steam ovens and grills –
Methods for measuring performance

AMENDMENT 1
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) IEC draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). IEC takes no position concerning the evidence, validity or applicability of any claimed patent rights in
respect thereof. As of the date of publication of this document, IEC had not received notice of (a) patent(s), which
may be required to implement this document. However, implementers are cautioned that this may not represent
the latest information, which may be obtained from the patent database available at https://patents.iec.ch. IEC
shall not be held responsible for identifying any or all such patent rights.
Amendment 1 to IEC 60350-1:2023 has been prepared by subcommittee 59K: Performance of
household and similar electrical cooking appliances, of IEC technical committee 59:
Performance of household and similar electrical appliances.
The text of this Amendment is based on the following documents:
Draft Report on voting
59K/410/FDIS 59K/412/RVD
Full information on the voting for its approval can be found in the report on voting indicated in
the above table.
IEC 60350-1:2023/AMD1:2025 – 3 –
© IEC 2025
The language used for the development of this Amendment is English.
This document was drafted in accordance with ISO/IEC Directives, Part 2, and developed in
accordance with ISO/IEC Directives, Part 1 and ISO/IEC Directives, IEC Supplement, available
at www.iec.ch/members_experts/refdocs. The main document types developed by IEC are
described in greater detail at www.iec.ch/publications/.
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under webstore.iec.ch in the data related to the
specific document. At this date, the document will be
• reconfirmed,
• withdrawn, or
• revised.
___________
1 Scope
Delete, in Note 2, the second dash.
2 Normative references
Add the following new reference:
IEC 60705:2024, Household microwave ovens – Methods for measuring performance
Replace the dated reference to IEC 62301 by an undated reference.
Delete the footnote to IEC 63474.
3 Terms and definitions
3.17
Replace the definition with the following new definition:
standby mode
condition where the appliance is connected to the mains and provides only one or more of the
following functions, which can persist for an indefinite duration:
a) reactivation function;
b) reactivation function and only an indication of enabled reactivation function;
c) information or status display.

– 4 – IEC 60350-1:2023/AMD1:2025
© IEC 2025
Add the following new term and definition:
3.23
combination microwave oven
appliance which can be operated by microwave function, combination microwave function and
heating function
Note 1 to entry: For definitions of a microwave function and combination microwave function, IEC 60705 is relevant.
[SOURCE: IEC 60705:2024, 3.2, modified – The Note to entry has been replaced.]
4.2 Oven and combi steam oven
Add the following at the end of 4.2:
– power consumption of low power modes (see Clause 14).
4.3 Steam ovens and combi steam oven
Add the following at the end of 4.3:
– power consumption of low power modes (see Clause 14).
4.5 Warming compartments
Add the following at the end of 4.5:
– power consumption of low power modes (see Clause 14).
5.3 Instrumentation
Replace, in Table 2, the fourth row with the following:
Temperature measurement °C ± 1,0 K Excluding the thermocouples
Sampling rate ≥ 1/s
8 Energy consumption and time for heating a load
8.1 Purpose
Add the following at the end of 8.1:
For measuring the energy consumption in a combination microwave oven fitted with a
turntable, deviating requirements regarding the test setup are specified in Annex H.
Annex K shows the expanded uncertainties for measuring the energy consumption.
8.2 Symbols and abbreviations
Replace, in Table 3, the thirteenth row related to the s-factor with the following:
s ratio between the observer temperatures measured in phase 1 in the last 30 % of the whole
k
phase and the observer temperature in phase 1 in the second last 30 %
...