SIST EN 20898-7:1996
(Main)Mechanical properties of fasteners - Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm (ISO 898-7:1992)
General Information
- Abstract
Applies to bolts and screws of property classes 8.8 to 12.9 in accordance with ISO 898-1 with thread less than M3 for which no breaking and proof loads are indicated in ISO 898-1, as well as to short bolts and screws with nominal diameters 3 mm to 10 mm which cannot be subjected to a tensile test. The minimum breaking torques are not valid for hexagon socket set screws.
- Status
- Published
- Publication Date
- 31-Mar-1996
- Technical Committee
- ISEL - Mechanical elements
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 01-Apr-1996
- Due Date
- 01-Apr-1996
- Completion Date
- 01-Apr-1996
Overview
The SIST EN 20898-7:1996 standard, titled Mechanical properties of fasteners - Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm (ISO 898-7:1992), establishes critical testing methods and mechanical requirements for fasteners. Issued by the European Committee for Standardization (CEN), this standard focuses on specific classes of bolts and screws-property classes 8.8 to 12.9 as per ISO 898-1-covering fasteners with nominal thread diameters from 1 mm to 10 mm.
This part is essential where conventional tensile testing is unsuitable, including for fasteners with thread diameters smaller than M3 or short bolts and screws between 3 mm and 10 mm that cannot undergo tensile stress tests. It provides key insights into torsional testing methods and the minimum torque values to ensure safety, reliability, and performance of small-diameter fasteners used in critical mechanical assemblies.
Key Topics
Scope of Fasteners Covered
Applies primarily to bolts and screws of property classes 8.8 to 12.9 as defined in ISO 898-1- Bolts and screws with thread diameters less than M3 lacking indicated breaking and proof loads in ISO 898-1
- Short bolts and screws with nominal diameters from 3 mm to 10 mm unsuitable for tensile testing
- Excludes hexagon socket set screws for minimum breaking torque applicability
Torsional Testing Methodology
Details the standardized procedure for conducting torsional tests to measure torsional strength and mechanical behavior under twisting loads
Ensures consistency in determining mechanical reliability of small fasteners subjected to torque in actual applicationsMinimum Torque Requirements
Specifies minimum breaking torques essential for quality assurance and performance benchmarking
Supports design engineers and quality control experts in selecting bolts and screws capable of withstanding operational stressesCompliance with ISO 898-7:1992
Harmonizes European standards with international benchmarks, facilitating global manufacturing and testing practices for fasteners
Applications
This standard is extensively utilized in industries where small-diameter bolts and screws are critical for mechanical integrity and safety, such as:
- Mechanical Engineering and Assembly
Ensures reliable torque specifications for miniature fasteners in machinery and equipment - Automotive and Aerospace Industries
Integral for components requiring precise torque control and mechanical performance under dynamic loads - Electronics and Electrical Devices
Provides specifications for tiny fasteners used in delicate assemblies where tensile testing may be impractical - Quality Assurance Laboratories and Testing Facilities
Standardizes torsional testing procedures to maintain fastener performance compliance and certification
By adhering to SIST EN 20898-7:1996, manufacturers and engineers can guarantee that fasteners meet minimum strength requirements, reducing failure risk and improving product longevity.
Related Standards
- ISO 898-1 - Mechanical properties of fasteners - Part 1: Bolts, screws, and studs with specified property classes
- ISO 898-7:1992 - International equivalent detailing torsional test and torque requirements for small fasteners
- EN 20898-1 series - Covers tensile testing and mechanical properties of fasteners with larger nominal diameters
- CEN EN 20898 series - Comprehensive standards covering a wide range of fastener mechanical properties and testing protocols
These related standards complement SIST EN 20898-7:1996 by addressing different fastener sizes, material classes, and mechanical testing methods, enabling holistic fastener quality control.
Keywords: EN 20898-7, torsional test, minimum torque, bolts, screws, fasteners, ISO 898-7, mechanical properties, small-diameter fasteners, property classes 8.8 to 12.9, tensile test alternative, CEN standards, fastener testing, torque specifications.
Relations
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
Frequently Asked Questions
SIST EN 20898-7:1996 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Mechanical properties of fasteners - Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm (ISO 898-7:1992)". This standard covers: Applies to bolts and screws of property classes 8.8 to 12.9 in accordance with ISO 898-1 with thread less than M3 for which no breaking and proof loads are indicated in ISO 898-1, as well as to short bolts and screws with nominal diameters 3 mm to 10 mm which cannot be subjected to a tensile test. The minimum breaking torques are not valid for hexagon socket set screws.
Applies to bolts and screws of property classes 8.8 to 12.9 in accordance with ISO 898-1 with thread less than M3 for which no breaking and proof loads are indicated in ISO 898-1, as well as to short bolts and screws with nominal diameters 3 mm to 10 mm which cannot be subjected to a tensile test. The minimum breaking torques are not valid for hexagon socket set screws.
SIST EN 20898-7:1996 is classified under the following ICS (International Classification for Standards) categories: 21.060.10 - Bolts, screws, studs. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 20898-7:1996 has the following relationships with other standards: It is inter standard links to SIST EN 13223:2005, SIST EN 12693:2008. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN 20898-7:1996 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Mehanske lastnosti veznih elementov - 7. del: Vzvojni (torzijski) preskus in najmanjši lomni momenti za vijake M1 do M10Mechanische Eigenschaften von Verbindungselementen - Teil 7: Torsionsversuch und Mindest-Bruchdrehmomente für Schrauben mit Nenndurchmessern 1 mm bis 10 mm (ISO 898-7:1992)Caractéristiques mécaniques des éléments de fixation - Partie 7: Essai de torsion et couples minimaux de rupture des vis de diametre nominal de filetage de 1 mm a 10 mm (ISO 898-7:1992)Mechanical
...



