SIST EN 12733:2001
(Main)Agricultural and forestry machinery - Pedestrian controlled motor mowers - Safety
Agricultural and forestry machinery - Pedestrian controlled motor mowers - Safety
This European standard specifies safety requirements and their verification for design and construction of pedestrian controlled motor mowers with rotary and alternative cutting tools used in agricultural, forestry or similar surfaces to cut or mulch grass or similar plants or scrub and woody vegetation. It applies also to interchangeable equipment for cutting or mulching grass or scrub intended to be mounted on a pedestrian controlled tractor. It does not cover lawn mowers (see EN 836:1997) or other lawn maintenance equipment.
Land- und forstwirtschaftliche Maschinen - Handgeführte Motormäher - Sicherheit
Diese europäische Norm enthält sicherheitstechnische Anforderungen und deren Überprüfung für Gestaltung und Konstruktion von handgeführten Motormähern mit alternierenden und rotierenden Schneidwerkzeugen, die in der Land- und Forstwirtschaft oder ähnlichen Bereichen zum Schneiden oder Mulchen von Gras oder ähnlichen Pflanzen oder Gestrüpp und holziger Vegetation eingesetzt werden. Sie gilt ebenso für auswechselbare Ausrüstungen zum Schneiden oder Mulchen von Gras oder Gestrüpp, die an einem handgeführten Traktor angebaut werden.
Matériel agricole et forestier - Motofaucheuses a conducteur a pied - Sécurité
1 Domaine d'application
La présente norme détermine les prescriptions de sécurité et les vérifications pour la conception et la construction des motofaucheuses à conducteur à pied munies de lames de coupe à mouvement alternatif ou rotatif, utilisées en agriculture, en foresterie, ou en horticulture, pour couper et/ou broyer de l'herbe ou des plantes similaires ou des broussailles et de la végétation ligneuse. Pour les besoins de la présente norme, les types suivants de machines à conducteur à pied sont considérées comme étant des motofaucheuses :
¾ broyeurs à fléaux ;
¾ faucheuses-broyeuses à conducteur à pied ;
¾ débroussailleuses à roues ;
¾ motofaucheuses à barre de coupe.
La présente norme s'applique également aux machines à utilisation multiple dans le cas de la coupe ou du broyage de l'herbe ou des broussailles.
La présente norme ne s'applique pas aux tondeuses à gazon (voir EN 836), ni aux débroussailleuses et coupe-herbe à moteur (voir EN ISO 11806), ni aux autres équipements d'entretien des pelouses.
La présente norme décrit les méthodes pour éliminer ou réduire les risques inhérents à l'utilisation des motofaucheuses. En outre, elle spécifie le type d'informations que le fabricant doit donner sur les pratiques d'utilisation sûre.
Les aspects liés à l'environnement n'ont pas été pris en compte dans cette norme.
La présente norme européenne s'applique avant tout aux machines fabriquées après la date de publication de la norme.
Kmetijski in gozdarski stroji - Ročno vodene motorne kosilnice - Varnost
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-december-2001
.PHWLMVNLLQJR]GDUVNLVWURML5RþQRYRGHQHPRWRUQHNRVLOQLFH9DUQRVW
Agricultural and forestry machinery - Pedestrian controlled motor mowers - Safety
Land- und forstwirtschaftliche Maschinen - Handgeführte Motormäher - Sicherheit
Matériel agricole et forestier - Motofaucheuses a conducteur a pied - Sécurité
Ta slovenski standard je istoveten z: EN 12733:2001
ICS:
65.060.50 Oprema za spravilo pridelkov Harvesting equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 12733
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2001
ICS 65.060.50
English version
Agricultural and forestry machinery - Pedestrian controlled motor
mowers - Safety
Matériel agricole et forestier - Motofaucheuses à Land- und forstwirtschaftliche Maschinen - Handgeführte
conducteur à pied - Sécurité Motormäher - Sicherheit
This European Standard was approved by CEN on 21 January 2001.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2001 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 12733:2001 E
worldwide for CEN national Members.
Page 2
Contents
Foreword.4
Introduction .4
1 Scope .5
2 Normative references .5
3 Terms and definitions.7
4 List of hazards.8
5 Safety requirements and/or measures .8
5.1 General.8
5.2 Engine starting and stopping devices.8
5.3 Manual controls .9
5.4 Marking of controls.10
5.5 Controls of the movement of the machine and of the blade(s).10
5.6 Reverse gear.11
5.7 Handlebars.11
5.8 Pressurized components .11
5.9 Liquid spillage.11
5.10 Exhaust system.11
5.11 Steering mechanism.14
5.12 Brakes .16
5.13 Electrical installations .17
5.14 Noise .17
5.15 Vibration.17
6 Specific requirements .18
6.1 Sickle bar mowers .18
6.2 Grassland mowers.19
6.3 Flail mowers .30
6.4 Scrub clearing machines .32
7 Information for use .35
7.1 Instruction handbook .35
7.2 Marking .36
Annex A (normative) List of hazards.37
Annex B (normative) Noise test code for motor mowers - Engineering method (grade 2) .42
B.0 Scope .42
B.1 A-weighted sound power level determination .42
B.2 A-weighted emission sound pressure level determination.44
B.3 Requirements for test floor.44
B.4 Installation, mounting and operating conditions .44
B.5 Measurement uncertainties and declaration of noise emission values.45
B.6 Information to be recorded and reported .45
Annex C (normative) Vibration measurement of motor mowers.46
C.1 Quantities to be measured.46
C.2 Instrumentation.46
C.3 Measurement direction and measurement location.46
C.4 Test procedure .47
C.5 Measurement procedure .48
C.6 Determination of the measurement result.49
Annex D (normative) Foot probe test.50
D.1 Test equipment .50
D.2 Test method.50
D.3 Test acceptance .50
Page 3
Annex E (normative) Material of protective skirts .52
E.1 Tearing resistance test.52
E.2 Perforation resistance test .52
E.3 Wear resistance test.52
Annex F (normative) Corrugated fibreboard penetration tests on grassland mowers - Test enclosure
wall panels (see 6.2.2.2.4.2) .53
F.1 Purpose.53
F.2 Test fixture.53
F.3 Fibreboard samples.53
F.4 Procedure .53
F.5 Acceptance criteria.53
Annex G (normative) Target elevation areas.55
G.1 Lower elevation target.55
G.2 Middle elevation target.55
G.3 Top elevation target.55
G.4 Operator target area .55
Annex H (normative) Test enclosure.56
H.1 Base.56
H.2 Target composition.56
Annex I (normative) Thrown object test for flail mower.59
I.1 Principle.59
I.2 Test installation.59
I.3 Test procedure.62
I.4 Test result.63
I.5 Acceptance criteria.63
Annex J (normative) Thrown object test for scrub clearing machines .64
J.1 Test equipment .64
J.2 Test method.64
J.3 Data sheet - Thrown object test for scrub clearing machine .66
Annex K (informative) Example of a material and construction fulfilling the requirements for an
artificial surface .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.