Abstract

This document specifies a method for the determination of the biometric characteristics of husked or milled rice kernels.

Status
Not Published
Public Enquiry End Date
13-Dec-2026
Current Stage
4020 - Public enquire (PE) (Adopted Project)
Start Date
13-Nov-2026
Due Date
02-Apr-2027

Buy Documents

Draft

oSIST prEN ISO 11746-1:2026

English language (12 pages)
Preview
Preview
e-Library read for
×1 day

oSIST prEN ISO 11746-1:2026 is a draft standard from CEN and ISO that specifies a manual method for determining the biometric characteristics of husked or milled rice kernels. It is intended for laboratories and other users who need measured kernel length, width, thickness and length/width ratio for comparison, quality control or reporting.

What does oSIST prEN ISO 11746-1:2026 specify?

oSIST prEN ISO 11746-1:2026 specifies a manual method for measuring the biometric characteristics of husked or milled rice kernels. The document focuses on how to prepare the sample, measure individual kernels and report the results in a consistent way.

The document is organized into scope, normative references, terms and definitions, principle, apparatus, sampling, procedure, calculation and expression of results, precision, and test report, followed by two informative annexes.

AnnexWhat it covers
Annex AKernel measurements, including the orientation of length, width and thickness
Annex BResults of the interlaboratory test used for precision data

What are the key requirements of oSIST prEN ISO 11746-1:2026?

oSIST prEN ISO 11746-1:2026 requires a simple but controlled manual workflow: prepare a representative test sample, measure two random sets of 100 kernels, check that the sets were selected randomly, then calculate and report the biometric results.

Sample preparation and sampling

  • Clause 6 says sampling is not part of the method, and ISO 24333 is the recommended sampling approach. In practice, the laboratory needs a truly representative sample that has not been altered in transport or storage.
  • Clause 7.1 reduces the aggregate sample by repeated division, then prepares a test sample of about 50 g and removes extraneous matter, immature or malformed kernels, and broken kernels. This matters because damaged or foreign material would distort the measured kernel dimensions.

Measurement set-up

  • Clause 4 states the principle: manual selection of kernels and measurement with a micrometer.
  • Clause 5 requires a sample divider or equivalent, a tray with contrast to the rice, tweezers for handling kernels, and a micrometer readable to the nearest 0.01 mm that does not deform the kernel. That is especially important for husked rice, where pressure can change the measured size.

Measurement and calculation

  • Clause 7.2 requires two random sets of 100 kernels from the test sample. Each kernel is measured in the correct orientation, with values reported to the nearest 0.01 mm.
  • Clause 7.2.3 compares the mean values of the two sets for each characteristic. If the check value is greater than 2, the sets are treated as not randomly selected and the procedure is repeated from the start of the random drawing step.
  • Clause 8 calculates the overall mean length, width and thickness, and also the length/width ratio. The reported results are the mean values to the nearest 0.01 mm.

Precision and reporting

  • Clause 9 gives repeatability limits of 0.125 mm for length, 0.049 mm for width and 0.040 mm for thickness, and reproducibility limits of 0.337 mm, 0.163 mm and 0.092 mm. These limits help users judge whether two results are close enough for the same lab or for different labs.
  • Clause 10 requires the test report to identify the sample, state the sampling method if known, cite ISO 11746-1, record any non-standard operating details or incidents, give the results, include the final quoted result if repeatability was checked, and note the date.

What terms does oSIST prEN ISO 11746-1:2026 define?

  • Biometric characteristic - the kernel length, width and thickness measured along the three Cartesian axes.
  • Length/width ratio - the ratio calculated from the mean length and mean width.
  • Repeatability - the closeness of results obtained under the same laboratory conditions, as used in the precision section.
  • Reproducibility - the closeness of results obtained in different laboratories under different conditions.
  • PH, PM, H, M, Hmx, Mmx - the rice sample categories used in Annex B: parboiled husked, parboiled milled, husked, milled, husked mixture of varieties, and milled mixture of varieties.

Who uses oSIST prEN ISO 11746-1:2026?

oSIST prEN ISO 11746-1:2026 is used by laboratories that measure rice kernel dimensions, by technical staff working in cereals and cereal products, and by quality managers who need a manual reference method for rice characterization. It is also relevant to organizations that compare rice lots, verify product description, or document kernel size data for internal quality work.

What changed in oSIST prEN ISO 11746-1:2026 from the previous edition?

oSIST prEN ISO 11746-1:2026 is a first edition that cancels and replaces ISO 11746:2020. The changes stated in the document are a renumbering and a title change to align with the new ISO 11746-2.

Which standards are used with oSIST prEN ISO 11746-1:2026?

  • ISO 5725-1 - provides the general principles and definitions for accuracy, trueness and precision used in the precision section.
  • ISO 7301 - gives the rice specification referenced by the terminology section.
  • ISO 24333 - provides sampling guidance for cereals and cereal products, which supports Clause 6 and the sample divider note.
  • ISO 5725-2 - is cited in Annex B as the basis for the interlaboratory test used to establish precision data.

What does the oSIST prEN ISO 11746-1:2026 document contain?

oSIST prEN ISO 11746-1:2026 contains the full manual measurement procedure, including the sample preparation steps, the orientation for measuring kernels, and the calculation of mean values and length/width ratio. Annex A provides a figure showing how length, width and thickness are measured on a kernel. Annex B gives interlaboratory precision results for length, width and thickness, including summary tables for six rice sample types. The document also includes the test report requirements so users can record results in a consistent way.

Relations

Effective Date
25-Aug-2026

Buy Documents

Draft

oSIST prEN ISO 11746-1:2026

English language (12 pages)
Preview
Preview
e-Library read for
×1 day

Get Certified

Connect with accredited certification bodies for this standard

BSI Group

BSI (British Standards Institution) is the business standards company that helps organizations make excellence a habit.

UKAS United Kingdom Verified

Bureau Veritas

Bureau Veritas is a world leader in laboratory testing, inspection and certification services.

COFRAC France Verified

DNV

DNV is an independent assurance and risk management provider.

NA Norway Verified

Sponsored listings

Frequently Asked Questions

oSIST prEN ISO 11746-1:2026 is a draft published by the Slovenian Institute for Standardization (SIST). Its full title is "Rice - Determination of biometric characteristics of kernels - Part 1: Manual method (ISO/FDIS 11746-1:2026)". This standard covers: This document specifies a method for the determination of the biometric characteristics of husked or milled rice kernels.

This document specifies a method for the determination of the biometric characteristics of husked or milled rice kernels.

oSIST prEN ISO 11746-1:2026 is classified under the following ICS (International Classification for Standards) categories: 67.060 - Cereals, pulses and derived products. The ICS classification helps identify the subject area and facilitates finding related standards.

oSIST prEN ISO 11746-1:2026 has the following relationships with other standards: It is inter standard links to SIST EN ISO 11746:2023. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

oSIST prEN ISO 11746-1:2026 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.

Standards Content (Sample)


SLOVENSKI STANDARD
01-december-2026
Riž - Ugotavljanje biometričnih lastnosti zrn - 1. del: Ročna metoda (ISO/FDIS
11746-1:2026)
Rice - Determination of biometric characteristics of kernels - Part 1: Manual method
(ISO/FDIS 11746-1:2026)
Reis - Bestimmung biometrischer Merkmale von Reiskörnern - Teil 1: Manuelles
Verfahren (ISO/FDIS 11746-1:2026)
Riz - Détermination des caractéristiques biométriques des grains - Partie 1: Méthode
manuelle (ISO/FDIS 11746-1:2026)
Ta slovenski standard je istoveten z: prEN ISO 11746-1
ICS:
67.060 Žita, stročnice in proizvodi iz Cereals, pulses and derived
njih products
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

FINAL DRAFT
International
Standard
ISO/FDIS 11746-1
ISO/TC 34/SC 4
Rice — Determination of biometric
Secretariat: SAC
characteristics of kernels —
Voting begins on:
2026-11-02
Part 1:
Manual method
Voting terminates on:
2026-12-14
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT,
WITH THEIR COMMENTS, NOTIFICATION OF ANY
RELEVANT PATENT RIGHTS OF WHICH THEY ARE AWARE
AND TO PROVIDE SUPPOR TING DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
ISO/CEN PARALLEL PROCESSING LOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE
TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL
TO BECOME STAN DARDS TO WHICH REFERENCE MAY BE
MADE IN NATIONAL REGULATIONS.
Reference number
ISO/FDIS 11746-1:2026(en) © ISO 2026

FINAL DRAFT
ISO/FDIS 11746-1:2026(en)
International
Standard
ISO/FDIS 11746-1
ISO/TC 34/SC 4
Rice — Determination of biometric
Secretariat: SAC
characteristics of kernels —
Voting begins on:
Part 1:
Manual method
Voting terminates on:
© ISO 2026
All rights reserved.
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT,
WITH THEIR COMMENTS, NOTIFICATION OF ANY
This ISO publication is protected by copyright and is owned by ISO and/or its licensors.
RELEVANT PATENT RIGHTS OF WHICH THEY ARE AWARE
The content of this ISO publication is provided under licence, not sold. Use is subject to the applicable licence terms issued by ISO,
AND TO PROVIDE SUPPOR TING DOCUMENTATION.
an ISO member body, or an authorized third-party distributor.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
Except as required for implementation or expressly permitted by a separate licence, no part of this ISO publication may be
ISO/CEN PARALLEL PROCESSING
LOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
reproduced, distributed, modified, used, or made available in any form or by any means – electronic or mechanical, including
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE
photocopying, scanning, recording, or posting on internal or external digital platforms. TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL
TO BECOME STAN DARDS TO WHICH REFERENCE MAY BE
Any use beyond the scope of the granted rights is prohibited and may result in legal action.
MADE IN NATIONAL REGULATIONS.
ISO copyright office
CP 401 • CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
Reference number
ISO/FDIS 11746-1:2026(en) © ISO 2026

ii
ISO/FDIS 11746-1:2026(en)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 1
5 Apparatus . 1
6 Sampling . 2
7 Procedure . 2
7.1 Preparation of the test sample .2
7.2 Determination .2
8 Calculation and expression of results . 3
8.1 Calculation .3
8.2 Determination of length/width ratio .3
8.3 Expression of results .3
9 Precision . 3
9.1 Interlaboratory test . .3
9.2 Repeatability .3
9.3 Reproducibility .3
10 Test report . 4
Annex A (informative) Kernel measurements . 5
Annex B (informative) Results of the interlaboratory test . 6
Bibliography . 8

iii
ISO/FDIS 11746-1:2026(en)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types
of ISO document should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent
rights in respect thereof. As of the date of publication of this document, ISO had not received notice of (a)
patent(s) which may be required to implement this document. However, implementers are cautioned that
this may not represent the latest information, which may be obtained from the patent database available at
www.iso.org/patents. ISO shall not be held responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions
related to conformity assessment, as well as information about ISO’s adherence to the World Trade
Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 34, Food products, Subcommittee SC 4, Cereals
and pulses, in collaboration with the European Committee for Standardization (CEN) Technical Committee
CEN/TC 338, Cereal and cereal products, in accordance with the Agreement on technical cooperation between
ISO and CEN (Vienn
...