ISO 965-6:2025

International
Standard
ISO 965-6
First edition
ISO general purpose metric screw
2025-07
threads — Tolerances —
Part 6:
Limits of sizes for internal and
external threads (fine and medium
tolerance qualities, first and second
choices)
Filetages métriques ISO pour usages généraux — Tolérances —
Partie 6: Limites de dimensions pour les filetages intérieurs et
extérieurs (qualités de tolérances fine et moyenne, premier et
deuxième choix)
Reference number
© ISO 2025
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Limits of sizes . 1
4.1 General .1
4.2 Internal threads.3
4.3 External threads . 39
Bibliography .72

iii
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types
of ISO document should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent
rights in respect thereof. As of the date of publication of this document, ISO had not received notice of (a)
patent(s) which may be required to implement this document. However, implementers are cautioned that
this may not represent the latest information, which may be obtained from the patent database available at
www.iso.org/patents. ISO shall not be held responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions
related to conformity assessment, as well as information about ISO's adherence to the World Trade
Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 1, Screw threads.
A list of all parts in the ISO 965 series can be found on the ISO website.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.

iv
International Standard ISO 965-6:2025(en)
ISO general purpose metric screw threads — Tolerances —
Part 6:
Limits of sizes for internal and external threads (fine and
medium tolerance qualities, first and second choices)
1 Scope
This document specifies the limits of sizes for major, pitch and minor diameters of ISO general purpose
metric screw threads (M) conforming to ISO 261 and having basic and design profiles in accordance with
ISO 68-1.
This document is applicable to the metric fastening screw threads with the ten tolerance classes (4H, 5H, 6H,
7H, 6G, 4h, 6h, 6g, 6f and 6e) recommended in ISO 965-1.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes
requirements of this document. For dated references, only the edition cited applies. For undated references,
the latest edition of the referenced document (including any amendments) applies.
ISO 965-1, ISO general purpose metric screw threads — Part 1: Principles and basic data
ISO 5408, Screw threads — Vocabulary
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 5408 apply.
ISO and IEC maintain terminology databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https:// www .iso .org/ obp
— IEC Electropedia: available at https:// www .electropedia .org/
4 Limits of sizes
4.1 General
The limits of sizes specified shall be derived from the fundamental deviations and tolerances specified in
ISO 965-1.
The limits of sizes for major, pitch and minor diameters of screw threads (M) have been calculated by the
following formulae, derived from the formulae provided in ISO 68-1 and ISO 965-1, and rounded to the third
decimal place.
Internal thread:
Major diameter D = D + EI
min
Pitch diameter D = D + EI = D – 0,649 519 P + EI
2 min 2
D = D + T
2 max 2 min D2
Minor diameter D = D + EI = D – 1,082 532 P + EI
1 min 1
D = D + T
1 max 1 min D1
External thread:
Major diameter d = d + es
max
d = d – T
min max d
Pitch diameter d = d + es = d – 0,649 519 P + es
2 max 2
d = d – T
2 min 2 max d2
Minor diameter d = d + es = d – 1,082 532 P + es
1 max 1
d = d – 0,866 025 404 P/2 + 2 C
3 max 1 max max
d = d – T – 0,866 025 404 P/2 + 0,250 P
3 min 1 max d2
Where es is a negative value.
For the symbols and their definitions see ISO 965-1.
The maximum major diameter of internal thread D is not specified.
max
Usually, the minimum major diameter of internal thread D and the maximum minor diameter of external
min
thread d are gauged by the crest diameter of GO thread gauges in accordance with ISO 1502.
1 max
For external threads, controlling the maximum minor diameter d and the minimum root radius R
1 max 1 min
ensures the conformity of the maximum minor diameter d .
3 max
Whether to measure the maximum and minimum minor diameters of external thread, d and d , shall
3 max 3 min
be decided according to the relevant threaded product documents. Unless specifically defined otherwise, it
is not necessary to carry out a measurement of the minor diameter d .
For the ten tolerance classes and nominal diameter ranges see Table 1.
Table 1 — M screw threads with the ten recommended tolerance classes
Nominal diameter
Screw thread Tolerance class Table number
mm
4H From 1 to 100 Table 2
5H From 1 to 300 Table 3
Internal thread 6H From 1,4 to 300 Table 4
7H From 3 to 200 Table 5
6G From 1,4 to 200 Table 6
TTabablele 1 1 ((ccoonnttiinnueuedd))
Nominal diameter
Screw thread Tolerance class Table number
mm
4h From 1 to 100 Table 7
6h From 1 to 100 Table 8
External thread 6g From 1 to 300 Table 9
6f From 1,6 to 200 Table 10
6e From 3 to 200 Table 11
4.2 Internal threads
Limits of sizes for the internal threads with tolerance class 4H shall be as specified in Table 2.
Table 2 — Limits of sizes for the internal threads with tolerance class 4H
Dimensions in millimetres
Major
Nominal
Pitch diameter Minor diameter
diameter
diameter Pitch
a
D P D D D D D
min 2 max 2 min 1 max 1 min
1 0,2 1,000 0,910 0,870 0,821 0,783
1 0,25 1,000 0,883 0,838 0,774 0,729
1,1 0,2 1,100 1,010 0,970 0,921 0,883
1,1 0,25 1,100 0,983 0,938 0,874 0,829
1,2 0,2 1,200 1,110 1,070 1,021 0,983
1,2 0,25 1,200 1,083 1,038 0,974 0,929
1,4 0,2 1,400 1,310 1,270 1,221 1,183
1,4 0,3 1,400 1,253 1,205 1,128 1,075
1,6 0,2 1,600 1,512 1,470 1,421 1,383
1,6 0,35 1,600 1,426 1,373 1,284 1,221
1,8 0,2 1,800 1,712 1,670 1,621 1,583
1,8 0,35 1,800 1,626 1,573 1,484 1,421
2 0,25 2,000 1,886 1,838 1,774 1,729
2 0,4 2,000 1,796 1,740 1,638 1,567
2,2 0,25 2,200 2,086 2,038 1,974 1,929
2,2 0,45 2,200 1,968 1,908 1,793 1,713
2,5 0,35 2,500 2,326 2,273 2,184 2,121
2,5 0,45 2,500 2,268 2,208 2,093 2,013
3 0,35 3,000 2,829 2,773 2,684 2,621
3 0,5 3,000 2,738 2,675 2,549 2,459
3,5 0,35 3,500 3,329 3,273 3,184 3,121
3,5 0,6 3,500 3,181 3,110 2,950 2,850
4 0,5 4,000 3,738 3,675 3,549 3,459
4 0,7 4,000 3,620 3,545 3,354 3,242
4,5 0,5 4,500 4,238 4,175 4,049 3,959
4,5 0,75 4,500 4,088 4,013 3,806 3,688
5 0,5 5,000 4,738 4,675 4,549 4,459
5 0,8 5,000 4,560 4,480 4,259 4,134
a
Refers to the imaginary coaxial cylinder through the endpoints of straight flanks.

TTabablele 2 2 ((ccoonnttiinnueuedd))
Major
Nominal
Pitch diameter Minor diameter
diameter
diameter Pitch
a
D P D D D D D
min 2 max 2 min 1 max 1 min
5,5 0,5 5,500 5,238 5,175 5,049 4,959
6 0,75 6,000 5,598 5,513 5,306 5,188
6 1 6,000 5,445 5,350 5,067 4,917
7 0,75 7,000 6,598 6,513 6,306 6,188
7 1 7,000 6,445 6,350 6,067 5,917
8 0,75 8,000 7,598 7,513 7,306 7,188
8 1 8,000 7,445 7,350 7,067 6,917
8 1,25 8,000 7,288 7,188 6,817 6,647
9 0,75 9,000 8,598 8,513 8,306 8,188
9 1 9,000 8,445 8,350 8,067 7,917
9 1,25 9,000 8,288 8,188 7,817 7,647
10 0,75 10,000 9,598 9,513 9,306 9,188
10 1 10,000 9,445 9,350 9,067 8,917
10 1,25 10,000 9,288 9,188 8,817 8,647
10 1,5 10,000 9,138 9,026 8,566 8,376
11 0,75 11,000 10,598 10,513 10,306 10,188
11 1 11,000 10,445 10,350 10,067 9,917
11 1,5 11,000 10,138 10,026 9,566 9,376
12 1 12,000 11,450 11,350 11,067 10,917
12 1,25 12,000 11,300 11,188 10,817 10,647
12 1,5 12,000 11,144 11,026 10,566 10,376
12 1,75 12,000 10,988 10,863 10,318 10,106
14 1 14,000 13,450 13,350 13,067 12,917
14 1,5 14,000 13,144 13,026 12,566 12,376
14 2 14,000 12,833 12,701 12,071 11,835
15 1 15,000 14,450 14,350 14,067 13,917
15 1,5 15,000 14,144 14,026 13,566 13,376
16 1 16,000 15,450 15,350 15,067 14,917
16 1,5 16,000 15,144 15,026 14,566 14,376
16 2 16,000 14,833 14,701 14,071 13,835
17 1 17,000 16,450 16,350 16,067 15,917
17 1,5 17,000 16,144 16,026 15,566 15,376
18 1 18,000 17,450 17,350 17,067 16,917
18 1,5 18,000 17,144 17,026 16,566 16,376
18 2 18,000 16,833 16,701 16,071 15,835
18 2,5 18,000 16,516 16,376 15,574 15,294
20 1 20,000 19,450 19,350 19,067 18,917
20 1,5 20,000 19,144 19,026 18,566 18,376
20 2 20,000 18,833 18,701 18,071 17,835
20 2,5 20,000 18,516 18,376 17,574 17,294
22 1 22,000 21,450 21,350 21,067 20,917
a
Refers to the imaginary coaxial cylinder through the endpoints of straight flanks.

TTabablele 2 2 ((ccoonnttiinnueuedd))
Major
Nominal
Pitch diameter Minor diameter
diameter
diameter Pitch
a
D P D D D D D
min 2 max 2 min 1 max 1 min
22 1,5 22,000 21,144 21,026 20,566 20,376
22 2 22,000 20,833 20,701 20,071 19,835
22 2,5 22,000 20,516 20,376 19,574 19,294
24 1 24,000 23,456 23,350 23,067 22,917
24 1,5 24,000 23,151 23,026 22,566 22,376
24 2 24,000 22,841 22,701 22,071 21,835
24 3 24,000 22,221 22,051 21,067 20,752
25 1 25,000 24,456 24,350 24,067 23,917
25 1,5 25,000 24,151 24,026 23,566 23,376
25 2 25,000 23,841 23,701 23,071 22,835
26 1,5 26,000 25,151 25,026 24,566 24,376
27 1 27,000 26,456 26,350 26,067 25,917
27 1,5 27,000 26,151 26,026 25,566 25,376
27 2 27,000 25,841 25,701 25,071 24,835
27 3 27,000 25,221 25,051 24,067 23,752
28 1 28,000 27,456 27,350 27,067 26,917
28 1,5 28,000 27,151 27,026 26,566 26,376
28 2 28,000 26,841 26,701 26,071 25,835
30 1 30,000 29,456 29,350 29,067 28,917
30 1,5 30,000 29,151 29,026 28,566 28,376
30 2 30,000 28,841 28,701 28,071 27,835
30 3 30,000 28,221 28,051 27,067 26,752
30 3,5 30,000 27,907 27,727 26,566 26,211
32 1,5 32,000 31,151 31,026 30,566 30,376
32 2 32,000 30,841 30,701 30,071 29,835
33 1,5 33,000 32,151 32,026 31,566 31,376
33 2 33,000 31,841 31,701 31,071 30,835
33 3 33,000 31,221 31,051 30,067 29,752
33 3,5 33,000 30,907 30,727 29,566 29,211
36 1,5 36,000 35,151 35,026 34,566 34,376
36 2 36,000 34,841 34,701 34,071 33,835
36 3 36,000 34,221 34,051 33,067 32,752
36 4 36,000 33,592 33,402 32,045 31,670
38 1,5 38,000 37,151 37,026 36,566 36,376
39 1,5 39,000 38,151 38,026 37,566 37,376
39 2 39,000 37,841 37,701 37,071 36,835
39 3 39,000 37,221 37,051 36,067 35,752
39 4 39,000 36,592 36,402 35,045 34,670
40 1,5 40,000 39,151 39,026 38,566 38,376
40 2 40,000 38,841 38,701 38,071 37,835
40 3 40,000 38,221 38,051 37,067 36,752
a
Refers to the imaginary coaxial cylinder through the endpoints of straight flanks.

TTabablele 2 2 ((ccoonnttiinnueuedd))
Major
Nominal
Pitch diameter Minor diameter
diameter
diameter Pitch
a
D P D D D D D
min 2 max 2 min 1 max 1 min
42 1,5 42,000 41,151 41,026 40,566 40,376
42 2 42,000 40,841 40,701 40,071 39,835
42 3 42,000 40,221 40,051 39,067 38,752
42 4 42,000 39,592 39,402 38,045 37,670
42 4,5 42,000 39,277 39,077 37,554 37,129
45 1,5 45,000 44,151 44,026 43,566 43,376
45 2 45,000 43,841 43,701 43,071 42,835
45 3 45,000 43,221 43,051 42,067 41,752
45 4 45,000 42,592 42,402 41,045 40,670
45 4,5 45,000 42,277 42,077 40,554 40,129
48 1,5 48,000 47,158 47,026 46,566 46,376
48 2 48,000 46,851 46,701 46,071 45,835
48 3 48,000 46,231 46,051 45,067 44,752
48 4 48,000 45,602 45,402 44,045 43,670
48 5 48,000 44,964 44,752 43,037 42,587
50 1,5 50,000 49,158 49,026 48,566 48,376
50 2 50,000 48,851 48,701 48,071 47,835
50 3 50,000 48,231 48,051 47,067 46,752
52 1,5 52,000 51,158 51,026 50,566 50,376
52 2 52,000 50,851 50,701 50,071 49,835
52 3 52,000 50,231 50,051 49,067 48,752
52 4 52,000 49,602 49,402 48,045 47,670
52 5 52,000 48,964 48,752 47,037 46,587
55 1,5 55,000 54,158 54,026 53,566 53,376
55 2 55,000 53,851 53,701 53,071 52,835
55 3 55,000 53,231 53,051 52,067 51,752
55 4 55,000 52,602 52,402 51,045 50,670
56 1,5 56,000 55,158 55,026 54,566 54,376
56 2 56,000 54,851 54,701 54,071 53,835
56 3 56,000 54,231 54,051 53,067 52,752
56 4 56,000 53,602 53,402 52,045 51,670
56 5,5 56,000 52,652 52,428 50,521 50,046
58 1,5 58,000 57,158 57,026 56,566 56,376
58 2 58,000 56,851 56,701 56,071 55,835
58 3 58,000 56,231 56,051 55,067 54,752
58 4 58,000 55,602 55,402 54,045 53,670
60 1,5 60,000 59,158 59,026 58,566 58,376
60 2 60,000 58,851 58,701 58,071 57,835
60 3 60,000 58,231 58,051 57,067 56,752
60 4 60,000 57,602 57,402 56,045 55,670
60 5,5 60,000 56,652 56,428 54,521 54,046
a
Refers to the imaginary coaxial cylinder through the endpoints of straight flanks.

TTabablele 2 2 ((ccoonnttiinnueuedd))
Major
Nominal
Pitch diameter Minor diameter
diameter
diameter Pitch
a
D P D D D D D
min 2 max 2 min 1 max 1 min
62 1,5 62,000 61,158 61,026 60,566 60,376
62 2 62,000 60,851 60,701 60,071 59,835
62 3 62,000 60,231 60,051 59,067 58,752
62 4 62,000 59,602 59,402 58,045 57,670
64 1,5 64,000 63,158 63,026 62,566 62,376
64 2 64,000 62,851 62,701 62,071 61,835
64 3 64,000 62,231 62,051 61,067 60,752
64 4 64,000 61,602 61,402 60,045 59,670
64 6 64,000 60,339 60,103 58,005 57,505
65 1,5 65,000 64,158 64,026 63,566 63,376
65 2 65,000 63,851 63,701 63,071 62,835
65 3 65,000 63,231 63,051 62,067 61,752
65 4 65,000 62,602 62,402 61,045 60,670
68 1,5 68,000 67,158 67,026 66,566 66,376
68 2 68,000 66,851 66,701 66,071 65,835
68 3 68,000 66,231 66,051 65,067 64,752
68 4 68,000 65,602 65,402 64,045 63,670
68 6 68,000 64,339 64,103 62,005 61,505
70 1,5 70,000 69,158 69,026 68,566 68,376
70 2 70,000 68,851 68,701 68,071 67,835
70 3 70,000 68,231 68,051 67,067 66,752
70 4 70,000 67,602 67,402 66,045 65,670
70 6 70,000 66,339 66,103 64,005 63,505
72 1,5 72,000 71,158 71,026 70,566 70,376
72 2 72,000 70,851 70,701 70,071 69,835
72 3 72,000 70,231 70,051 69,067 68,752
72 4 72,000 69,602 69,402 68,045 67,670
72 6 72,000 68,339 68,103 66,005 65,505
75 1,5 75,000 74,158 74,026 73,566 73,376
75 2 75,000 73,851 73,701 73,071 72,835
75 3 75,000 73,231 73,051 72,067 71,752
75 4 75,000 72,602 72,402 71,045 70,670
76 1,5 76,000 75,158 75,026 74,566 74,376
76 2 76,000 74,851 74,701 74,071 73,835
76 3 76,000 74,231 74,051 73,067 72,752
76 4 76,000 73,602 73,402 72,045 71,670
76 6 76,000 72,339 72,103 70,005 69,505
78 2 78,000 76,851 76,701 76,071 75,835
80 1,5 80,000 79,158 79,026 78,566 78,376
80 2 80,000 78,851 78,701 78,071 77,835
80 3 80,000 78,231 78,051 77,067 76,752
a
Refers to the imaginary coaxial cylinder through the endpoints of straight flanks.

TTabablele 2 2 ((ccoonnttiinnueuedd))
Major
Nominal
Pitch diameter Minor diameter
diameter
diameter Pitch
a
D P D D D D D
min 2 max 2 min 1 max 1 min
80 4 80,000 77,602 77,402 76,045 75,670
80 6 80,000 76,339 76,103 74,005 73,505
82 2 82,000 80,851 80,701 80,071 79,835
85 2 85,000 83,851 83,701 83,071 82,835
85 3 85,000 83,231 83,051 82,067 81,752
85 4 85,000 82,602 82,402 81,045 80,670
85 6 85,000 81,339 81,103 79,005 78,505
90 2 90,000 88,851 88,701 88,071 87,835
90 3 90,000 88,231 88,051 87,067 86,752
90 4 90,000 87,602 87,402 86,045 85,670
90 6 90,000 86,339 86,103 84,005 83,505
95 2 95,000 93,861 93,701 93,071 92,835
95 3 95,000 93,241 93,051 92,067 91,752
95 4 95,000 92,614 92,402 91,045 90,670
95 6 95,000 91,353 91,103 89,005 88,505
100 2 100,000 98,861 98,701 98,071 97,835
100 3 100,000 98,241 98,051 97,067 96,752
100 4 100,000 97,614 97,402 96,045 95,670
100 6 100,000 96,353 96,103 94,005 93,505
a
Refers to the imaginary coaxial cylinder through the endpoints of straight flanks.
Limits of sizes for the internal threads with tolerance class 5H shall be as specified in Table 3.
Table 3 — Limits of sizes for the internal threads with tolerance class 5H
Dimensions in millimetres
Major
Nominal
Pitch diameter Minor diameter
diameter
diameter Pitch
a
D P D D D D D
min 2 max 2 min 1 max 1 min
1 0,25 1,000 0,894 0,838 0,785 0,729
1,1 0,25 1,100 0,994 0,938 0,885 0,829
1,2 0,25 1,200 1,094 1,038 0,985 0,929
1,4 0,3 1,400 1,265 1,205 1,142 1,075
1,6 0,35 1,600 1,440 1,373 1,301 1,221
1,8 0,35 1,800 1,640 1,573 1,501 1,421
2 0,25 2,000 1,898 1,838 1,785 1,729
2 0,4 2,000 1,811 1,740 1,657 1,567
2,2 0,25 2,200 2,098 2,038 1,985 1,929
2,2 0,45 2,200 1,983 1,908 1,813 1,713
2,5 0,35 2,500 2,340 2,273 2,201 2,121
2,5 0,45 2,500 2,283 2,208 2,113 2,013
3 0,35 3,000 2,844 2,773 2,701 2,621
3 0,5 3,000 2,755 2,675 2,571 2,459
a
Refers to the imaginary coaxial cylinder through the endpoints of straight flanks.

TTabablele 3 3 ((ccoonnttiinnueuedd))
Major
Nominal
Pitch diameter Minor diameter
diameter
diameter Pitch
a
D P D D D D D
min 2 max 2 min 1 max 1 min
3,5 0,35 3,500 3,344 3,273 3,201 3,121
3,5 0,6 3,500 3,200 3,110 2,975 2,850
4 0,5 4,000 3,755 3,675 3,571 3,459
4 0,7 4,000 3,640 3,545 3,382 3,242
4,5 0,5 4,500 4,255 4,175 4,071 3,959
4,5 0,75 4,500 4,108 4,013 3,838 3,688
5 0,5 5,000 4,755 4,675 4,571 4,459
5 0,8 5,000 4,580 4,480 4,294 4,134
5,5 0,5 5,500 5,255 5,175 5,071 4,959
6 0,75 6,000 5,619 5,513 5,338 5,188
6 1 6,000 5,468 5,350 5,107 4,917
7 0,75 7,000 6,619 6,513 6,338 6,188
7 1 7,000 6,468 6,350 6,107 5,917
8 0,75 8,000 7,619 7,513 7,338 7,188
8 1 8,000 7,468 7,350 7,107 6,917
8 1,25 8,000 7,313 7,188 6,859 6,647
9 0,75 9,000 8,619 8,513 8,338 8,188
9 1 9,000 8,468 8,350 8,107 7,917
9 1,25 9,000 8,313 8,188 7,859 7,647
10 0,75 10,000 9,619 9,513 9,338 9,188
10 1 10,000 9,468 9,350 9,107 8,917
10 1,25 10,000 9,313 9,188 8,859 8,647
10 1,5 10,000 9,166 9,026 8,612 8,376
11 0,75 11,000 10,619 10,513 10,338 10,188
11 1 11,000 10,468 10,350 10,107 9,917
11 1,5 11,000 10,166 10,026 9,612 9,376
12 1 12,000 11,475 11,350 11,107 10,917
12 1,25 12,000 11,328 11,188 10,859 10,647
12 1,5 12,000 11,176 11,026 10,612 10,376
12 1,75 12,000 11,023 10,863 10,371 10,106
14 1 14,000 13,475 13,350 13,107 12,917
14 1,5 14,000 13,176 13,026 12,612 12,376
14 2 14,000 12,871 12,701 12,135 11,835
15 1 15,000 14,475 14,350 14,107 13,917
15 1,5 15,000 14,176 14,026 13,612 13,376
16 1 16,000 15,475 15,350 15,107 14,917
16 1,5 16,000 15,176 15,026 14,612 14,376
16 2 16,000 14,871 14,701 14,135 13,835
17 1 17,000 16,475 16,350 16,107 15,917
17 1,5 17,000 16,176 16,026 15,612 15,376
18 1 18,000 17,475 17,350 17,107 16,917
a
Refers to the imaginary coaxial cylinder through the endpoints of straight flanks.

TTabablele 3 3 ((ccoonnttiinnueuedd))
Major
Nominal
Pitch diameter Minor diameter
diameter
diameter Pitch
a
D P D D D D D
min 2 max 2 min 1 max 1 min
18 1,5 18,000 17,176 17,026 16,612 16,376
18 2 18,000 16,871 16,701 16,135 15,835
18 2,5 18,000 16,556 16,376 15,649 15,294
20 1 20,000 19,475 19,350 19,107 18,917
20 1,5 20,000 19,176 19,026 18,612 18,376
20 2 20,000 18,871 18,701 18,135 17,835
20 2,5 20,000 18,556 18,376 17,649 17,294
22 1 22,000 21,475 21,350 21,107 20,917
22 1,5 22,000 21,176 21,026 20,612 20,376
22 2 22,000 20,871 20,701 20,135 19,835
22 2,5 22,000 20,556 20,376 19,649 19,294
24 1 24,000 23,482 23,350 23,107 22,917
24 1,5 24,000 23,186 23,026 22,612 22,376
24 2 24,000 22,881 22,701 22,135 21,835
24 3 24,000 22,263 22,051 21,152 20,752
25 1 25,000 24,482 24,350 24,107 23,917
25 1,5 25,000 24,186 24,026 23,612 23,376
25 2 25,000 23,881 23,701 23,135 22,835
26 1,5 26,000 25,186 25,026 24,612 24,376
27 1 27,000 26,482 26,350 26,107 25,917
27 1,5 27,000 26,186 26,026 25,612 25,376
27 2 27,000 25,881 25,701 25,135 24,835
27 3 27,000 25,263 25,051 24,152 23,752
28 1 28,000 27,482 27,350 27,107 26,917
28 1,5 28,000 27,186 27,026 26,612 26,376
28 2 28,000 26,881 26,701 26,135 25,835
30 1 30,000 29,482 29,350 29,107 28,917
30 1,5 30,000 29,186 29,026 28,612 28,376
30 2 30,000 28,881 28,701 28,135 27,835
30 3 30,000 28,263 28,051 27,152 26,752
30 3,5 30,000 27,951 27,727 26,661 26,211
32 1,5 32,000 31,186 31,026 30,612 30,376
32 2 32,000 30,881 30,701 30,135 29,835
33 1,5 33,000 32,186 32,026 31,612 31,376
33 2 33,000 31,881 31,701 31,135 30,835
33 3 33,000 31,263 31,051 30,152 29,752
33 3,5 33,000 30,951 30,727 29,661 29,211
36 1,5 36,000 35,186 35,026 34,612 34,376
36 2 36,000 34,881 34,701 34,135 33,835
36 3 36,000 34,263 34,051 33,152 32,752
36 4 36,000 33,638 33,402 32,145 31,670
a
Refers to the imaginary coaxial cylinder through the endpoints of straight flanks.

TTabablele 3 3 ((ccoonnttiinnueuedd))
Major
Nominal
Pitch diameter Minor diameter
diameter
diameter Pitch
a
D P D D D D D
min 2 max 2 min 1 max 1 min
38 1,5 38,000 37,186 37,026 36,612 36,376
39 1,5 39,000 38,186 38,026 37,612 37,376
39 2 39,000 37,881 37,701 37,135 36,835
39 3 39,000 37,263 37,051 36,152 35,752
39 4 39,000 36,638 36,402 35,145 34,670
40 1,5 40,000 39,186 39,026 38,612 38,376
40 2 40,000 38,881 38,701 38,135 37,835
40 3 40,000 38,263 38,051 37,152 36,752
42 1,5 42,000 41,186 41,026 40,612 40,376
42 2 42,000 40,881 40,701 40,135 39,835
42 3 42,000 40,263 40,051 39,152 38,752
42 4 42,000 39,638 39,402 38,145 37,670
42 4,5 42,000 39,327 39,077 37,659 37,129
45 1,5 45,000 44,186 44,026 43,612 43,376
45 2 45,000 43,881 43,701 43,135 42,835
45 3 45,000 43,263 43,051 42,152 41,752
45 4 45,000 42,638 42,402 41,145 40,670
45 4,5 45,000 42,327 42,077 40,659 40,129
48 1,5 48,000 47,196 47,026 46,612 46,376
48 2 48,000 46,891 46,701 46,135 45,835
48 3 48,000 46,275 46,051 45,152 44,752
48 4 48,000 45,652 45,402 44,145 43,670
48 5 48,000 45,017 44,752 43,147 42,587
50 1,5 50,000 49,196 49,026 48,612 48,376
50 2 50,000 48,891 48,701 48,135 47,835
50 3 50,000 48,275 48,051 47,152 46,752
52 1,5 52,000 51,196 51,026 50,612 50,376
52 2 52,000 50,891 50,701 50,135 49,835
52 3 52,000 50,275 50,051 49,152 48,752
52 4 52,000 49,652 49,402 48,145 47,670
52 5 52,000 49,017 48,752 47,147 46,587
55 1,5 55,000 54,196 54,026 53,612 53,376
55 2 55,000 53,891 53,701 53,135 52,835
55 3 55,000 53,275 53,051 52,152 51,752
55 4 55,000 52,652 52,402 51,145 50,670
56 1,5 56,000 55,196 55,026 54,612 54,376
56 2 56,000 54,891 54,701 54,135 53,835
56 3 56,000 54,275 54,051 53,152 52,752
56 4 56,000 53,652 53,402 52,145 51,670
56 5,5 56,000 52,708 52,428 50,646 50,046
58 1,5 58,000 57,196 57,026 56,612 56,376
a
Refers to the imaginary coaxial cylinder through the endpoints of straight flanks.

TTabablele 3 3 ((ccoonnttiinnueuedd))
Major
Nominal
Pitch diameter Minor diameter
diameter
diameter Pitch
a
D P D D D D D
min 2 max 2 min 1 max 1 min
58 2 58,000 56,891 56,701 56,135 55,835
58 3 58,000 56,275 56,051 55,152 54,752
58 4 58,000 55,652 55,402 54,145 53,670
60 1,5 60,000 59,196 59,026 58,612 58,376
60 2 60,000 58,891 58,701 58,135 57,835
60 3 60,000 58,275 58,051 57,152 56,752
60 4 60,000 57,652 57,402 56,145 55,670
60 5,5 60,000 56,708 56,428 54,646 54,046
62 1,5 62,000 61,196 61,026 60,612 60,376
62 2 62,000 60,891 60,701 60,135 59,835
62 3 62,000 60,275 60,051 59,152 58,752
62 4 62,000 59,652 59,402 58,145 57,670
64 1,5 64,000 63,196 63,026 62,612 62,376
64 2 64,000 62,891 62,701 62,135 61,835
64 3 64,000 62,275 62,051 61,152 60,752
64 4 64,000 61,652 61,402 60,145 59,670
64 6 64,000 60,403 60,103 58,135 57,505
65 1,5 65,000 64,196 64,026 63,612 63,376
65 2 65,000 63,891 63,701 63,135 62,835
65 3 65,000 63,275 63,051 62,152 61,752
65 4 65,000 62,652 62,402 61,145 60,670
68 1,5 68,000 67,196 67,026 66,612 66,376
68 2 68,000 66,891 66,701 66,135 65,835
68 3 68,000 66,275 66,051 65,152 64,752
68 4 68,000 65,652 65,402 64,145 63,670
68 6 68,000 64,403 64,103 62,135 61,505
70 1,5 70,000 69,196 69,026 68,612 68,376
70 2 70,000 68,891 68,701 68,135 67,835
70 3 70,000 68,275 68,051 67,152 66,752
70 4 70,000 67,652 67,402 66,145 65,670
70 6 70,000 66,403 66,103 64,135 63,505
72 1,5 72,000 71,196 71,026 70,612 70,376
72 2 72,000 70,891 70,701 70,135 69,835
72 3 72,000 70,275 70,051 69,152 68,752
72 4 72,000 69,652 69,402 68,145 67,670
72 6 72,000 68,403 68,103 66,135 65,505
75 1,5 75,000 74,196 74,026 73,612 73,376
75 2 75,000 73,891 73,701 73,135 72,835
75 3 75,000 73,275 73,051 72,152 71,752
75 4 75,000 72,652 72,402 71,145 70,670
76 1,5 76,000 75,196 75,026 74,612 74,376
a
Refers to the imaginary coaxial cylinder through the endpoints of straight flanks.

TTabablele 3 3 ((ccoonnttiinnueuedd))
Major
Nominal
Pitch diameter Minor diameter
diameter
diameter Pitch
a
D P D D D D D
min 2 max 2 min 1 max 1 min
76 2 76,000 74,891 74,701 74,135 73,835
76 3 76,000 74,275 74,051 73,152 72,752
76 4 76,000 73,652 73,402 72,145 71,670
76 6 76,000 72,403 72,103 70,135 69,505
78 2 78,000 76,891 76,701 76,135 75,835
80 1,5 80,000 79,196 79,026 78,612 78,376
80 2 80,000 78,891 78,701 78,135 77,835
80 3 80,000 78,275 78,051 77,152 76,752
80 4 80,000 77,652 77,402 76,145 75,670
80 6 80,000 76,403 76,103 74,135 73,505
82 2 82,000 80,891 80,701 80,135 79,835
85 2 85,000 83,891 83,701 83,135 82,835
85 3 85,000 83,275 83,051 82,152 81,752
85 4 85,000 82,652 82,402 81,145 80,670
85 6 85,000 81,403 81,103 79,135 78,505
90 2 90,000 88,891 88,701 88,135 87,835
90 3 90,000 88,275 88,051 87,152 86,752
90 4 90,000 87,652 87,402 86,145 85,670
90 6 90,000 86,403 86,103 84,135 83,505
95 2 95,000 93,901 93,701 93,135 92,835
95 3 95,000 93,287 93,051 92,152 91,752
95 4 95,000 92,667 92,402 91,145 90,670
95 6 95,000 91,418 91,103 89,135 88,505
100 2 100,000 98,901 98,701 98,135 97,835
100 3 100,000 98,287 98,051 97,152 96,752
100 4 100,000 97,667 97,402 96,145 95,670
100 6 100,000 96,418 96,103 94,135 93,505
105 2 105,000 103,901 103,701 103,135 102,835
105 3 105,000 103,287 103,051 102,152 101,752
105 4 105,000 102,667 102,402 101,145 100,670
105 6 105,000 101,418 101,103 99,135 98,505
110 2 110,000 108,901 108,701 108,135 107,835
110 3 110,000 108,287 108,051 107,152 106,752
110 4 110,000 107,667 107,402 106,145 105,670
110 6 110,000 106,418 106,103 104,135 103,505
115 2 115,000 113,901 113,701 113,135 112,835
115 3 115,000 113,287 113,051 112,152 111,752
115 4 115,000 112,667 112,402 111,145 110,670
115 6 115,000 111,418 111,103 109,135 108,505
120 2 120,000 118,901 118,701 118,135 117,835
120 3 120,000 118,287 118,051 117,152 116,752
a
Refers to the imaginary coaxial cylinder through the endpoints of straight flanks.

TTabablele 3 3 ((ccoonnttiinnueuedd))
Major
Nominal
Pitch diameter Minor diameter
diameter
diameter Pitch
a
D P D D D D D
min 2 max 2 min 1 max 1 min
120 4 120,000 117,667 117,402 116,145 115,670
120 6 120,000 116,418 116,103 114,135 113,505
125 2 125,000 123,901 123,701 123,135 122,835
125 3 125,000 123,287 123,051 122,152 121,752
125 4 125,000 122,667 122,402 121,145 120,670
125 6 125,000 121,418 121,103 119,135 118,505
125 8 125,000 120,159 119,804 117,140 116,340
130 2 130,000 128,901 128,701 128,135 127,835
130 3 130,000 128,287 128,051 127,152 126,752
130 4 130,000 127,667 127,402 126,145 125,670
130 6 130,000 126,418 126,103 124,135 123,505
130 8 130,000 125,159 124,804 122,140 121,340
135 2 135,000 133,901 133,701 133,135 132,835
135 3 135,000 133,287 133,051 132,152 131,752
135 4 135,000 132,667 132,402 131,145 130,670
135 6 135,000 131,418 131,103 129,135 128,505
140 2 140,000 138,901 138,701 138,135 137,835
140 3 140,000 138,287 138,051 137,152 136,752
140 4 140,000 137,667 137,402 136,145 135,670
140 6 140,000 136,418 136,103 134,135 133,505
140 8 140,000 135,159 134,804 132,140 131,340
145 2 145,000 143,901 143,701 143,135 142,835
145 3 145,000 143,287 143,051 142,152 141,752
145 4 145,000 142,667 142,402 141,145 140,670
145 6 145,000 141,418 141,103 139,135 138,505
150 2 150,000 148,901 148,701 148,135 147,835
150 3 150,000 148,287 148,051 147,152 146,752
150 4 150,000 147,667 147,402 146,145 145,670
150 6 150,000 146,418 146,103 144,135 143,505
150 8 150,000 145,159 144,804 142,140 141,340
155 3 155,000 153,287 153,051 152,152 151,752
155 4 155,000 152,667 152,402 151,145 150,670
155 6 155,000 151,418 151,103 149,135 148,505
160 3 160,000 158,287 158,051 157,152 156,752
160 4 160,000 157,667 157,402 156,145 155,670
160 6 160,000 156,418 156,103 154,135 153,505
160 8 160,000 155,159 154,804 152,140 151,340
165 3 165,000 163,287 163,051 162,152 161,752
165 4 165,000 162,667 162,402 161,145 160,670
165 6 165,000 161,418 161,103 159,135 158,505
170 3 170,000 168,287 168,051 167,152 166,752
a
Refers to the imaginary coaxial cylinder through the endpoints of straight flanks.

TTabablele 3 3 ((ccoonnttiinnueuedd))
Major
Nominal
Pitch diameter Minor diameter
diameter
diameter Pitch
a
D P D D D D D
min 2 max 2 min 1 max 1 min
170 4 170,000 167,667 167,402 166,145 165,670
170 6 170,000 166,418 166,103 164,135 163,505
170 8 170,000 165,159 164,804 162,140 161,340
175 3 175,000 173,287 173,051 172,152 171,752
175 4 175,000 172,667 172,402 171,145 170,670
175 6 175,000 171,418 171,103 169,135 168,505
180 3 180,000 178,287 178,051 177,152 176,752
180 4 180,000 177,667 177,402 176,145 175,670
180 6 180,000 176,418 176,103 174,135 173,505
180 8 180,000 175,159 174,804 172,140 171,340
185 3 185,000 183,316 183,051 182,152 181,752
185 4 185,000 182,702 182,402 181,145 180,670
185 6 185,000 181,438 181,103 179,135 178,505
190 3 190,000 188,316 188,051 187,152 186,752
190 4 190,000 187,702 187,402 186,145 185,670
190 6 190,000 186,438 186,103 184,135 183,505
190 8 190,000 185,179 184,804 182,140 181,340
195 3 195,000 193,316 193,051 192,152 191,752
195 4 195,000 192,702 192,402 191,145 190,670
195 6 195,000 191,438 191,103 189,135 188,505
200 3 200,000 198,316 198,051 197,152 196,752
200 4 200,000 197,702 197,402 196,145 195,670
200 6 200,000 196,438 196,103 194,135 193,505
200 8 200,000 195,179 194,804 192,140 191,340
205 3 205,000 203,316 203,051 202,152 201,752
205 4 205,000 202,702 202,402 201,145 200,670
205 6 205,000 201,438 201,103 199,135 198,505
210 3 210,000 208,316 208,051 207,152 206,752
210 4 210,000 207,702 207,402 206,145 205,670
210 6 210,000 206,438 206,103 204,135 203,505
210 8 210,000 205,179 204,804 202,140 201,340
215 3 215,000 213,316 213,051 212,152 211,752
215 4 215,000 212,702 212,402 211,145 210,670
215 6 215,000 211,438 211,103 209,135 208,505
220 3 220,000 218,316 218,051 217,152 216,752
220 4 220,000 217,702 217,402 216,145 215,670
220 6 220,000 216,438 216,103 214,135 213,505
220 8 220,000 215,179 214,804 212,140 211,340
225 3 225,000 223,316 223,051 222,152 221,752
225 4 225,000 222,702 222,402 221,145 220,670
225 6 225,000 221,438 221,103 219,135 218,505
a
Refers to the imaginary coaxial cylinder through the endpoints of straight flanks.

TTabablele 3 3 ((ccoonnttiinnueuedd))
Major
Nominal
Pitch diameter Minor diameter
diameter
diameter Pitch
a
D P D D D D D
min 2 max 2 min 1 max 1 min
230 3 230,000 228,316 228,051 227,152 226,752
230 4 230,000 227,702 227,402 226,145 225,670
230 6 230,000 226,438 226,103 224,135 223,505
230 8 230,000 225,179 224,804 222,140 221,340
235 3 235,000 233,316 233,051 232,152 231,752
235 4 235,000 232,702 232,402 231,145 230,670
235 6 235,000 231,438 231,103 229,135 228,505
240 3 240,000 238,316 238,051 237,152 236,752
240 4 240,000 237,702 237,402 236,145 235,670
240 6 240,000 236,438 236,103 234,135 233,505
240 8 240,000 235,179 234,804 232,140 231,340
245 3 245,000 243,316 243,051 242,152 241,752
245 4 245,000 242,702 242,402 241,145 240,670
245 6 245,000 241,438 241,103 239,135 238,505
250 3 250,000 248,316 248,051 247,152 246,752
250 4 250,000 247,702 247,402 246,145 245,670
250 6 250,000 246,438 246,103 244,135 243,505
250 8 250,000 245,179 244,804 242,140 241,340
255 4 255,000 252,702 252,402 251,145 250,670
255 6 255,000 251,438 251,103 249,135 248,505
260 4 260,000 257,702 257,402 256,145 255,670
260 6 260,000 256,438 256,103 254,135 253,505
260 8 260,000 255,179 254,804 252,140 251,340
265 4 265,000 262,702 262,402 261,145 260,670
265 6 265,000 261,438 261,103 259,135 258,505
270 4 270,000 267,702 267,402 266,145 265,670
270 6 270,000 266,438 266,103 264,135 263,505
270 8 270,000 265,179 264,804 262,140 261,340
275 4 275,000 272,702 272,402 271,145 270,670
275 6 275,000 271,438 271,103 269,135 268,505
280 4 280,000 277,702 277,402 276,145 275,670
280 6 280,000 276,438 276,103 274,135 273,505
280 8 280,000 275,179 274,804 272,140 271,340
285 4 285,000 282,702 282,402 281,145 280,670
285 6 285,000 281,438 281,103 279,135 278,505
290 4 290,000 287,702 287,402 286,145 285,670
290 6 290,000 286,438 286,103 284,135 283,505
290 8 290,000 285,179 284,804 282,140 281,340
295 4 295,000 292,702 292,402 291,145 290,670
295 6 295,000 291,438 291,103 289,135 288,505
300 4 300,000 297,702 297,402 296,145 295,670
a
Refers to the imaginary coaxial cylinder through the endpoints of straight flanks.

TTabablele 3 3 ((ccoonnttiinnueuedd))
Major
Nominal
Pitch diameter Minor diameter
diameter
diameter Pitch
a
D P D D D D D
min 2 max 2 min 1 max 1 min
300 6 300,000 296,438 296,103 294,135 293,505
300 8 300,000 295,179 294,804 292,140 291,340
a
Refers to the imaginary coaxial cylinder through the endpoints of straight flanks.
Limits of sizes for the internal threads with tolerance class 6H shall be as specified in Table 4.
Table 4 — Limits of sizes for the internal threads with tolerance class 6H
Dimensions in millimetres
Major
Nominal
Pitch diameter Minor diameter
diameter
diameter Pitch
a
D P D D D D D
min 2 max 2 min 1 max 1 min
1,4 0,3 1,400 1,280 1,205 1,160 1,075
1,6 0,35 1,600 1,458 1,373 1,321 1,221
1,8 0,35 1,800 1,658 1,573 1,521 1,421
2 0,4 2,000 1,830 1,740 1,679 1,567
2,2 0,45 2,200 2,003 1,908 1,838 1,713
2,5 0,35 2,500 2,358 2,273 2,221 2,121
2,5 0,45 2,500 2,303 2,208 2,138 2,013
3 0,35 3,000 2,863 2,773 2,721 2,621
3 0,5 3,000 2,775 2,675 2,599 2,459
3,5 0,35 3,500 3,363 3,273 3,221 3,121
3,5 0,6 3,500 3,222 3,110 3,010 2,850
4 0,5 4,000 3,775 3,675 3,599 3,459
4 0,7 4,000 3,663 3,545 3,422 3,242
4,5 0,5 4,500 4,275 4,175 4,099 3,959
4,5 0,75 4,500 4,131 4,013 3,878 3,688
5 0,5 5,000 4,775 4,675 4,599 4,459
5 0,8 5,000 4,605 4,480 4,334 4,134
5,5 0,5 5,500 5,275 5,175 5,099 4,959
6 0,75 6,000 5,645 5,513 5,378 5,188
6 1 6,000 5,500 5,350 5,153 4,917
7 0,75 7,000 6,645 6,513 6,378 6,188
7 1 7,000 6,500 6,350 6,153 5,917
8 0,75 8,000 7,645 7,513 7,378 7,188
8 1 8,000 7,500 7,350 7,153 6,917
8 1,25 8,000 7,348 7,188 6,912 6,647
9 0,75 9,000 8,645 8,513 8,378 8,188
9 1 9,000 8,500 8,350 8,153 7,917
9 1,25 9,000 8,348 8,188 7,912 7,647
10 0,75 10,000 9,645 9,513 9,378 9,188
10 1 10,000 9,500 9,350 9,153 8,917
10 1,25 10,000 9,348 9,188 8,912 8,647
a
Refers to the imaginary coaxial cylinder through the endpoints of straight flanks.

TTabablele 4 4 ((ccoonnttiinnueuedd))
Major
Nominal
Pitch diameter Minor diameter
diameter
diameter Pitch
a
D P D D D D D
min 2 max 2 min 1 max 1 min
10 1,5 10,000 9,206 9,026 8,676 8,376
11 0,75 11,000 10,645 10,513 10,378 10,188
11 1 11,000 10,500 10,350 10,153 9,917
11 1,5 11,000 10,206 10,026 9,676 9,376
12 1 12,000 11,510 11,350 11,153 10,917
12 1,25 12,000 11,368 11,188 10,912 10,647
12 1,5 12,000 11,216 11,026 10,676 10,376
12 1,75 12,000 11,063 10,863 10,441 10,106
14 1 14,000 13,510 13,350 13,153 12,917
14 1,5 14,000 13,216 13,026 12,676 12,376
14 2 14,000 12,913 12,701 12,210 11,835
15 1 15,000 14,510 14,350 14,153 13,917
15 1,5 15,000 14,216 14,026 13,676 13,376
16 1 16,000 15,510 15,350 15,153 14,917
16 1,5 16,000 15,216 15,026 14,676 14,376
16 2 16,000 14,913 14,701 14,210 13,835
17 1 17,000 16,510 16,350 16,153 15,917
17 1,5 17,000 16,216 16,026 15,676 15,376
18 1 18,000 17,510 17,350 17,153 16,917
18 1,5 18,000 17,216 17,026 16,676 16,376
18 2 18,000 16,913 16,701 16,210 15,835
18 2,5 18,000 16,600 16,376 15,744 15,294
20 1 20,000 19,510 19,350 19,153 18,917
20 1,5 20,000 19,216 19,026 18,676 18,376
20 2 20,000 18,913 18,701 18,210 17,835
20 2,5 20,000 18,600 18,376 17,744 17,294
22 1 22,000 21,510 21,350 21,153 20,917
22 1,5 22,000 21,216 21,026 20,676 20,376
22 2 22,000 20,913 20,701 20,210 19,835
22 2,5 22,000 20,600 20,376 19,744 19,294
24 1 24,000 23,520 23,350 23,153 22,917
24 1,5 24,000 23,226 23,026 22,676 22,376
24 2 24,000 22,925 22,701 22,210 21,835
24 3 24,000 22,316 22,051 21,252 20,752
25 1 25,000 24,520 24,350 24,153 23,917
25 1,5 25,000 24,226 24,026 23,676 23,376
25 2 25,000 23,925 23,701 23,210 22,835
26 1,5 26,000 25,226 25,026 24,676 24,376
27 1 27,000 26,520 26,350 26,153 25,917
27 1,5 27,000 26,226 26,026 25,676 25,376
27 2 27,000 25,925 25,701 25,210 24,835
a
Refers to the imaginary coaxial cylinder through the endpoints of straight flanks.

TTabablele 4 4 ((ccoonnttiinnueuedd))
Major
Nominal
Pitch diameter Minor diameter
diameter
diameter Pitch
a
D P D D D D D
min 2 max 2 min 1 max 1 min
27 3 27,000 25,316 25,051 24,252 23,752
28 1 28,000 27,520 27,350 27,153 26,917
28 1,5 28,000 27,226 27,026 26,676 26,376
28 2 28,000 26,925 26,701 26,210 25,835
30 1 30,000 29,520 29,350 29,153 28,917
30 1,5 30,000 29,226 29,026 28,676 28,376
30 2 30,000 28,925 28,701 28,210 27,835
30 3 30,000 28,316 28,051 27,252 26,752
30 3,5 30,000 28,007 27,727 26,771 26,211
32 1,5 32,000 31,226 31,026 30,676 30,376
32 2 32,000 30,925 30,701 30,210 29,835
33 1,5 33,000 32,226 32,026 31,676 31,376
33 2 33,000 31,925 31,701 31,210 30,835
33 3 33,000 31,316 31,051 30,252 29,752
33 3,5 33,000 31,007 30,727 29,771 29,211
36 1,5 36,000 35,226 35,026 34,676 34,376
36 2 36,000 34,925 34,701 34,210 33,835
36 3 36,000 34,316 34,051 33,252 32,752
36 4 36,000 33,702 33,402 32,270 31,670
38 1,5 38,000 37,226 37,026 36,676 36,376
39 1,5 39,000 38,226 38,026 37,676 37,376
39 2 39,000 37,925 37,701 37,210 36,835
39 3 39,000 37,316 37,051 36,252 35,752
39 4 39,000 36,702 36,402 35,270 34,670
40 1,5 40,000 39,226 39,026 38,676 38,376
40 2 40,000 38,925 38,701 38,210 37,835
40 3 40,000 38,316 38,051 37,252 36,752
42 1,5 42,000 41,226 41,026 40,676 40,376
42 2 42,000 40,925 40,701 40,210 39,835
42 3 42,000 40,316 40,051 39,252 38,752
42 4 42,000 39,702 39,402 38,270 37,670
42 4,5 42,000 39,392 39,077 37,799 37,129
45 1,5 45,000 44,226 44,026 43,676 43,376
45 2 45,000 43,925 43,701 43,210 42,835
45 3 45,000 43,316 43,051 42,252 41,752
45 4 45,000 42,702 42,402 41,270 40,670
45 4,5 45,000 42,392 42,077 40,799 40,129
48 1,5 48,000 47,238 47,026 46,676 46,376
48 2 48,000 46,937 46,701 46,210 45,835
48 3 48,000 46,331 46,051 45,252 44,752
48 4 48,000 45,717 45,402 44,270 43,670
a
Refers to the imaginary coaxial cylinder through the endpoints of straight flanks.

TTabablele 4 4 ((ccoonnttiinnueuedd))
Major
Nominal
Pitch diameter Minor diameter
diameter
diameter Pitch
a
D P D D D D D
min 2 max 2 min 1 max 1 min
48 5 48,000 45,087 44,752 43,297 42,587
50 1,5 50,000 49,238 49,026 48,676 48,376
50 2 50,000 48,937 48,701 48,210 47,835
50 3 50,000 48,331 48,051 47,252 46,752
52 1,5 52,000 51,238 51,026 50,676 50,376
52 2 52,000 50,937 50,701 50,210 49,835
52 3 52,000 50,331 50,051 49,252 48
...