ISO 2903-2:2025

International
Standard
ISO 2903-2
First edition
ISO metric trapezoidal screw
2025-07
threads — Tolerances —
Part 2:
Limits of sizes
Filetages métriques trapézoïdaux ISO — Tolérances —
Partie 2: Dimensions limites
Reference number
© ISO 2025
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Limits of sizes . 1
4.1 General .1
4.2 Internal threads.2
4.3 External threads .14
Bibliography .31

iii
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types
of ISO document should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent
rights in respect thereof. As of the date of publication of this document, ISO had not received notice of (a)
patent(s) which may be required to implement this document. However, implementers are cautioned that
this may not represent the latest information, which may be obtained from the patent database available at
www.iso.org/patents. ISO shall not be held responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions
related to conformity assessment, as well as information about ISO's adherence to the World Trade
Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 1, Screw threads.
A list of all parts in the ISO 2903 series can be found on the ISO website.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.

iv
International Standard ISO 2903-2:2025(en)
ISO metric trapezoidal screw threads — Tolerances —
Part 2:
Limits of sizes
1 Scope
This document specifies the limits of sizes for major, pitch and minor diameters of ISO metric trapezoidal
screw threads (Tr) conforming to ISO 2902 and having basic and design profiles in accordance with ISO 2901.
This document is applicable to the metric trapezoidal screw threads with the seven tolerance classes (7H,
8H, 9H, 7e, 8e, 8c and 9c) recommended in ISO 2903.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes
requirements of this document. For dated references, only the edition cited applies. For undated references,
the latest edition of the referenced document (including any amendments) applies.
ISO 2903, ISO metric trapezoidal screw threads — Tolerances
ISO 5408, Screw threads — Vocabulary
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 5408 apply.
ISO and IEC maintain terminology databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https:// www .iso .org/ obp
— IEC Electropedia: available at https:// www .electropedia .org/
4 Limits of sizes
4.1 General
The limits of sizes specified shall be derived from the fundamental deviations and tolerances specified in
ISO 2903.
The limits of sizes for major, pitch and minor diameters of screw threads (Tr) have been calculated by the
following formulae and rounded to the third decimal place.

Internal thread
Major diameter D = D + 2 a
4 min c
Pitch diameter D = D = D – 0,5 P
2 min 2
D = D + T
2 max 2 min D2
Minor diameter D = D = D – P
1 min 1
D = D + T
1 max 1 min D1
External thread
Major diameter d = d
max
d = d – T
min d
Pitch diameter d = d + es = d – 0,5 P + es
2 max 2
d = d – T
2 min 2 max d2
Minor diameter d = d – 2 a = d – P – 2 a
3 max 1 c c
d = d – T
3 min 3 max d3
Where es is a negative value.
For the symbols and their definitions see ISO 2903.
The maximum major diameter of internal thread D is not specified.
4 max
For the seven tolerance classes and nominal diameter ranges see Table 1.
Table 1 — Tr screw threads with the seven recommended tolerance classes
Nominal diameter
Screw thread Tolerance class Table number
mm
7H Table 2
From 8 to 300
Internal thread 8H Table 3
9H From 8 to 100 Table 4
7e Table 5
8e From 8 to 300 Table 6
External thread
8c Table 7
9c From 8 to 100 Table 8
4.2 Internal threads
Limits of sizes for the internal threads with tolerance class 7H shall be as specified in Table 2.

Table 2 — Limits of sizes for the internal threads with tolerance class 7H
Dimensions in millimetres
Major
Nominal
Pitch diameter Minor diameter
diameter
diameter Pitch
D P D D D D D
4 min 2 max 2 min 1 max 1 min
8 1,5 8,300 7,474 7,250 6,690 6,500
9 1,5 9,300 8,474 8,250 7,690 7,500
9 2 9,500 8,250 8,000 7,236 7,000
10 1,5 10,300 9,474 9,250 8,690 8,500
10 2 10,500 9,250 9,000 8,236 8,000
11 2 11,500 10,250 10,000 9,236 9,000
11 3 11,500 9,780 9,500 8,315 8,000
12 2 12,500 11,265 11,000 10,236 10,000
12 3 12,500 10,800 10,500 9,315 9,000
14 2 14,500 13,265 13,000 12,236 12,000
14 3 14,500 12,800 12,500 11,315 11,000
16 2 16,500 15,265 15,000 14,236 14,000
16 4 16,500 14,355 14,000 12,375 12,000
18 2 18,500 17,265 17,000 16,236 16,000
18 4 18,500 16,355 16,000 14,375 14,000
20 2 20,500 19,265 19,000 18,236 18,000
20 4 20,500 18,355 18,000 16,375 16,000
22 3 22,500 20,800 20,500 19,315 19,000
22 5 22,500 19,875 19,500 17,450 17,000
22 8 23,000 18,475 18,000 14,630 14,000
24 3 24,500 22,835 22,500 21,315 21,000
24 5 24,500 21,900 21,500 19,450 19,000
24 8 25,000 20,500 20,000 16,630 16,000
26 3 26,500 24,835 24,500 23,315 23,000
26 5 26,500 23,900 23,500 21,450 21,000
26 8 27,000 22,500 22,000 18,630 18,000
28 3 28,500 26,835 26,500 25,315 25,000
28 5 28,500 25,900 25,500 23,450 23,000
28 8 29,000 24,500 24,000 20,630 20,000
30 3 30,500 28,835 28,500 27,315 27,000
30 6 31,000 27,450 27,000 24,500 24,000
30 10 31,000 25,530 25,000 20,710 20,000
32 3 32,500 30,835 30,500 29,315 29,000
32 6 33,000 29,450 29,000 26,500 26,000
32 10 33,000 27,530 27,000 22,710 22,000
34 3 34,500 32,835 32,500 31,315 31,000
34 6 35,000 31,450 31,000 28,500 28,000
34 10 35,000 29,530 29,000 24,710 24,000
36 3 36,500 34,835 34,500 33,315 33,000
36 6 37,000 33,450 33,000 30,500 30,000
36 10 37,000 31,530 31,000 26,710 26,000

TTabablele 2 2 ((ccoonnttiinnueuedd))
Major
Nominal
Pitch diameter Minor diameter
diameter
diameter Pitch
D P D D D D D
4 min 2 max 2 min 1 max 1 min
38 3 38,500 36,835 36,500 35,315 35,000
38 7 39,000 34,975 34,500 31,560 31,000
38 10 39,000 33,530 33,000 28,710 28,000
40 3 40,500 38,835 38,500 37,315 37,000
40 7 41,000 36,975 36,500 33,560 33,000
40 10 41,000 35,530 35,000 30,710 30,000
42 3 42,500 40,835 40,500 39,315 39,000
42 7 43,000 38,975 38,500 35,560 35,000
42 10 43,000 37,530 37,000 32,710 32,000
44 3 44,500 42,835 42,500 41,315 41,000
44 7 45,000 40,975 40,500 37,560 37,000
44 12 45,000 38,560 38,000 32,800 32,000
46 3 46,500 44,855 44,500 43,315 43,000
46 8 47,000 42,530 42,000 38,630 38,000
46 12 47,000 40,630 40,000 34,800 34,000
48 3 48,500 46,855 46,500 45,315 45,000
48 8 49,000 44,530 44,000 40,630 40,000
48 12 49,000 42,630 42,000 36,800 36,000
50 3 50,500 48,855 48,500 47,315 47,000
50 8 51,000 46,530 46,000 42,630 42,000
50 12 51,000 44,630 44,000 38,800 38,000
52 3 52,500 50,855 50,500 49,315 49,000
52 8 53,000 48,530 48,000 44,630 44,000
52 12 53,000 46,630 46,000 40,800 40,000
55 3 55,500 53,855 53,500 52,315 52,000
55 9 56,000 51,060 50,500 46,670 46,000
55 14 57,000 48,670 48,000 41,900 41,000
60 3 60,500 58,855 58,500 57,315 57,000
60 9 61,000 56,060 55,500 51,670 51,000
60 14 62,000 53,670 53,000 46,900 46,000
65 4 65,500 63,400 63,000 61,375 61,000
65 10 66,000 60,560 60,000 55,710 55,000
65 16 67,000 57,710 57,000 50,000 49,000
70 4 70,500 68,400 68,000 66,375 66,000
70 10 71,000 65,560 65,000 60,710 60,000
70 16 72,000 62,710 62,000 55,000 54,000
75 4 75,500 73,400 73,000 71,375 71,000
75 10 76,000 70,560 70,000 65,710 65,000
75 16 77,000 67,710 67,000 60,000 59,000
80 4 80,500 78,400 78,000 76,375 76,000
80 10 81,000 75,560 75,000 70,710 70,000
80 16 82,000 72,710 72,000 65,000 64,000

TTabablele 2 2 ((ccoonnttiinnueuedd))
Major
Nominal
Pitch diameter Minor diameter
diameter
diameter Pitch
D P D D D D D
4 min 2 max 2 min 1 max 1 min
85 4 85,500 83,400 83,000 81,375 81,000
85 12 86,000 79,630 79,000 73,800 73,000
85 18 87,000 76,750 76,000 68,120 67,000
90 4 90,500 88,400 88,000 86,375 86,000
90 12 91,000 84,630 84,000 78,800 78,000
90 18 92,000 81,750 81,000 73,120 72,000
95 4 95,500 93,425 93,000 91,375 91,000
95 12 96,000 89,670 89,000 83,800 83,000
95 18 97,000 86,800 86,000 78,120 77,000
100 4 100,500 98,425 98,000 96,375 96,000
100 12 101,000 94,670 94,000 88,800 88,000
100 20 102,000 90,800 90,000 81,180 80,000
105 4 105,500 103,425 103,000 101,375 101,000
105 12 106,000 99,670 99,000 93,800 93,000
105 20 107,000 95,800 95,000 86,180 85,000
110 4 110,500 108,425 108,000 106,375 106,000
110 12 111,000 104,670 104,000 98,800 98,000
110 20 112,000 100,800 100,000 91,180 90,000
115 6 116,000 112,500 112,000 109,500 109,000
115 14 117,000 108,710 108,000 101,900 101,000
115 22 117,000 104,850 104,000 94,250 93,000
120 6 121,000 117,500 117,000 114,500 114,000
120 14 122,000 113,710 113,000 106,900 106,000
120 22 122,000 109,850 109,000 99,250 98,000
125 6 126,000 122,500 122,000 119,500 119,000
125 14 127,000 118,710 118,000 111,900 111,000
125 22 127,000 114,850 114,000 104,250 103,000
130 6 131,000 127,500 127,000 124,500 124,000
130 14 132,000 123,710 123,000 116,900 116,000
130 22 132,000 119,850 119,000 109,250 108,000
135 6 136,000 132,500 132,000 129,500 129,000
135 14 137,000 128,710 128,000 121,900 121,000
135 24 137,000 123,900 123,000 112,320 111,000
140 6 141,000 137,500 137,000 134,500 134,000
140 14 142,000 133,710 133,000 126,900 126,000
140 24 142,000 128,900 128,000 117,320 116,000
145 6 146,000 142,500 142,000 139,500 139,000
145 14 147,000 138,710 138,000 131,900 131,000
145 24 147,000 133,900 133,000 122,320 121,000
150 6 151,000 147,500 147,000 144,500 144,000
150 16 152,000 142,750 142,000 135,000 134,000
150 24 152,000 138,900 138,000 127,320 126,000

TTabablele 2 2 ((ccoonnttiinnueuedd))
Major
Nominal
Pitch diameter Minor diameter
diameter
diameter Pitch
D P D D D D D
4 min 2 max 2 min 1 max 1 min
155 6 156,000 152,500 152,000 149,500 149,000
155 16 157,000 147,750 147,000 140,000 139,000
155 24 157,000 143,900 143,000 132,320 131,000
160 6 161,000 157,500 157,000 154,500 154,000
160 16 162,000 152,750 152,000 145,000 144,000
160 28 162,000 146,950 146,000 133,500 132,000
165 6 166,000 162,500 162,000 159,500 159,000
165 16 167,000 157,750 157,000 150,000 149,000
165 28 167,000 151,950 151,000 138,500 137,000
170 6 171,000 167,500 167,000 164,500 164,000
170 16 172,000 162,750 162,000 155,000 154,000
170 28 172,000 156,950 156,000 143,500 142,000
175 8 176,000 171,560 171,000 167,630 167,000
175 16 177,000 167,750 167,000 160,000 159,000
175 28 177,000 161,950 161,000 148,500 147,000
180 8 181,000 176,560 176,000 172,630 172,000
180 18 182,000 171,800 171,000 163,120 162,000
180 28 182,000 166,950 166,000 153,500 152,000
185 8 186,000 181,600 181,000 177,630 177,000
185 18 187,000 176,850 176,000 168,120 167,000
185 32 187,000 170,060 169,000 154,600 153,000
190 8 191,000 186,600 186,000 182,630 182,000
190 18 192,000 181,850 181,000 173,120 172,000
190 32 192,000 175,060 174,000 159,600 158,000
195 8 196,000 191,600 191,000 187,630 187,000
195 18 197,000 186,850 186,000 178,120 177,000
195 32 197,000 180,060 179,000 164,600 163,000
200 8 201,000 196,600 196,000 192,630 192,000
200 18 202,000 191,850 191,000 183,120 182,000
200 32 202,000 185,060 184,000 169,600 168,000
210 8 211,000 206,600 206,000 202,630 202,000
210 20 212,000 200,900 200,000 191,180 190,000
210 36 212,000 193,120 192,000 175,800 174,000
220 8 221,000 216,600 216,000 212,630 212,000
220 20 222,000 210,900 210,000 201,180 200,000
220 36 222,000 203,120 202,000 185,800 184,000
230 8 231,000 226,600 226,000 222,630 222,000
230 20 232,000 220,900 220,000 211,180 210,000
230 36 232,000 213,120 212,000 195,800 194,000
240 8 241,000 236,600 236,000 232,630 232,000
240 22 242,000 229,900 229,000 219,250 218,000
240 36 242,000 223,120 222,000 205,800 204,000

TTabablele 2 2 ((ccoonnttiinnueuedd))
Major
Nominal
Pitch diameter Minor diameter
diameter
diameter Pitch
D P D D D D D
4 min 2 max 2 min 1 max 1 min
250 12 251,000 244,710 244,000 238,800 238,000
250 22 252,000 239,900 239,000 229,250 228,000
250 40 252,000 231,120 230,000 211,900 210,000
260 12 261,000 254,710 254,000 248,800 248,000
260 22 262,000 249,900 249,000 239,250 238,000
260 40 262,000 241,120 240,000 221,900 220,000
270 12 271,000 264,710 264,000 258,800 258,000
270 24 272,000 258,950 258,000 247,320 246,000
270 40 272,000 251,120 250,000 231,900 230,000
280 12 281,000 274,710 274,000 268,800 268,000
280 24 282,000 268,950 268,000 257,320 256,000
280 40 282,000 261,120 260,000 241,900 240,000
290 12 291,000 284,710 284,000 278,800 278,000
290 24 292,000 278,950 278,000 267,320 266,000
290 44 292,000 269,250 268,000 248,000 246,000
300 12 301,000 294,710 294,000 288,800 288,000
300 24 302,000 288,950 288,000 277,320 276,000
300 44 302,000 279,250 278,000 258,000 256,000
Limits of sizes for the internal threads with tolerance class 8H shall be as specified in Table 3.
Table 3 — Limits of sizes for the internal threads with tolerance class 8H
Dimensions in millimetres
Major
Nominal
Pitch diameter Minor diameter
diameter
diameter Pitch
D P D D D D D
4 min 2 max 2 min 1 max 1 min
8 1,5 8,300 7,530 7,250 6,690 6,500
9 1,5 9,300 8,530 8,250 7,690 7,500
9 2 9,500 8,315 8,000 7,236 7,000
10 1,5 10,300 9,530 9,250 8,690 8,500
10 2 10,500 9,315 9,000 8,236 8,000
11 2 11,500 10,315 10,000 9,236 9,000
11 3 11,500 9,855 9,500 8,315 8,000
12 2 12,500 11,335 11,000 10,236 10,000
12 3 12,500 10,875 10,500 9,315 9,000
14 2 14,500 13,335 13,000 12,236 12,000
14 3 14,500 12,875 12,500 11,315 11,000
16 2 16,500 15,335 15,000 14,236 14,000
16 4 16,500 14,450 14,000 12,375 12,000
18 2 18,500 17,335 17,000 16,236 16,000
18 4 18,500 16,450 16,000 14,375 14,000
20 2 20,500 19,335 19,000 18,236 18,000
20 4 20,500 18,450 18,000 16,375 16,000

TTabablele 3 3 ((ccoonnttiinnueuedd))
Major
Nominal
Pitch diameter Minor diameter
diameter
diameter Pitch
D P D D D D D
4 min 2 max 2 min 1 max 1 min
22 3 22,500 20,875 20,500 19,315 19,000
22 5 22,500 19,975 19,500 17,450 17,000
22 8 23,000 18,600 18,000 14,630 14,000
24 3 24,500 22,925 22,500 21,315 21,000
24 5 24,500 22,000 21,500 19,450 19,000
24 8 25,000 20,630 20,000 16,630 16,000
26 3 26,500 24,925 24,500 23,315 23,000
26 5 26,500 24,000 23,500 21,450 21,000
26 8 27,000 22,630 22,000 18,630 18,000
28 3 28,500 26,925 26,500 25,315 25,000
28 5 28,500 26,000 25,500 23,450 23,000
28 8 29,000 24,630 24,000 20,630 20,000
30 3 30,500 28,925 28,500 27,315 27,000
30 6 31,000 27,560 27,000 24,500 24,000
30 10 31,000 25,670 25,000 20,710 20,000
32 3 32,500 30,925 30,500 29,315 29,000
32 6 33,000 29,560 29,000 26,500 26,000
32 10 33,000 27,670 27,000 22,710 22,000
34 3 34,500 32,925 32,500 31,315 31,000
34 6 35,000 31,560 31,000 28,500 28,000
34 10 35,000 29,670 29,000 24,710 24,000
36 3 36,500 34,925 34,500 33,315 33,000
36 6 37,000 33,560 33,000 30,500 30,000
36 10 37,000 31,670 31,000 26,710 26,000
38 3 38,500 36,925 36,500 35,315 35,000
38 7 39,000 35,100 34,500 31,560 31,000
38 10 39,000 33,670 33,000 28,710 28,000
40 3 40,500 38,925 38,500 37,315 37,000
40 7 41,000 37,100 36,500 33,560 33,000
40 10 41,000 35,670 35,000 30,710 30,000
42 3 42,500 40,925 40,500 39,315 39,000
42 7 43,000 39,100 38,500 35,560 35,000
42 10 43,000 37,670 37,000 32,710 32,000
44 3 44,500 42,925 42,500 41,315 41,000
44 7 45,000 41,100 40,500 37,560 37,000
44 12 45,000 38,710 38,000 32,800 32,000
46 3 46,500 44,950 44,500 43,315 43,000
46 8 47,000 42,670 42,000 38,630 38,000
46 12 47,000 40,800 40,000 34,800 34,000
48 3 48,500 46,950 46,500 45,315 45,000
48 8 49,000 44,670 44,000 40,630 40,000
48 12 49,000 42,800 42,000 36,800 36,000

TTabablele 3 3 ((ccoonnttiinnueuedd))
Major
Nominal
Pitch diameter Minor diameter
diameter
diameter Pitch
D P D D D D D
4 min 2 max 2 min 1 max 1 min
50 3 50,500 48,950 48,500 47,315 47,000
50 8 51,000 46,670 46,000 42,630 42,000
50 12 51,000 44,800 44,000 38,800 38,000
52 3 52,500 50,950 50,500 49,315 49,000
52 8 53,000 48,670 48,000 44,630 44,000
52 12 53,000 46,800 46,000 40,800 40,000
55 3 55,500 53,950 53,500 52,315 52,000
55 9 56,000 51,210 50,500 46,670 46,000
55 14 57,000 48,850 48,000 41,900 41,000
60 3 60,500 58,950 58,500 57,315 57,000
60 9 61,000 56,210 55,500 51,670 51,000
60 14 62,000 53,850 53,000 46,900 46,000
65 4 65,500 63,500 63,000 61,375 61,000
65 10 66,000 60,710 60,000 55,710 55,000
65 16 67,000 57,900 57,000 50,000 49,000
70 4 70,500 68,500 68,000 66,375 66,000
70 10 71,000 65,710 65,000 60,710 60,000
70 16 72,000 62,900 62,000 55,000 54,000
75 4 75,500 73,500 73,000 71,375 71,000
75 10 76,000 70,710 70,000 65,710 65,000
75 16 77,000 67,900 67,000 60,000 59,000
80 4 80,500 78,500 78,000 76,375 76,000
80 10 81,000 75,710 75,000 70,710 70,000
80 16 82,000 72,900 72,000 65,000 64,000
85 4 85,500 83,500 83,000 81,375 81,000
85 12 86,000 79,800 79,000 73,800 73,000
85 18 87,000 76,950 76,000 68,120 67,000
90 4 90,500 88,500 88,000 86,375 86,000
90 12 91,000 84,800 84,000 78,800 78,000
90 18 92,000 81,950 81,000 73,120 72,000
95 4 95,500 93,530 93,000 91,375 91,000
95 12 96,000 89,850 89,000 83,800 83,000
95 18 97,000 87,000 86,000 78,120 77,000
100 4 100,500 98,530 98,000 96,375 96,000
100 12 101,000 94,850 94,000 88,800 88,000
100 20 102,000 91,000 90,000 81,180 80,000
105 4 105,500 103,530 103,000 101,375 101,000
105 12 106,000 99,850 99,000 93,800 93,000
105 20 107,000 96,000 95,000 86,180 85,000
110 4 110,500 108,530 108,000 106,375 106,000
110 12 111,000 104,850 104,000 98,800 98,000
110 20 112,000 101,000 100,000 91,180 90,000

TTabablele 3 3 ((ccoonnttiinnueuedd))
Major
Nominal
Pitch diameter Minor diameter
diameter
diameter Pitch
D P D D D D D
4 min 2 max 2 min 1 max 1 min
115 6 116,000 112,630 112,000 109,500 109,000
115 14 117,000 108,900 108,000 101,900 101,000
115 22 117,000 105,060 104,000 94,250 93,000
120 6 121,000 117,630 117,000 114,500 114,000
120 14 122,000 113,900 113,000 106,900 106,000
120 22 122,000 110,060 109,000 99,250 98,000
125 6 126,000 122,630 122,000 119,500 119,000
125 14 127,000 118,900 118,000 111,900 111,000
125 22 127,000 115,060 114,000 104,250 103,000
130 6 131,000 127,630 127,000 124,500 124,000
130 14 132,000 123,900 123,000 116,900 116,000
130 22 132,000 120,060 119,000 109,250 108,000
135 6 136,000 132,630 132,000 129,500 129,000
135 14 137,000 128,900 128,000 121,900 121,000
135 24 137,000 124,120 123,000 112,320 111,000
140 6 141,000 137,630 137,000 134,500 134,000
140 14 142,000 133,900 133,000 126,900 126,000
140 24 142,000 129,120 128,000 117,320 116,000
145 6 146,000 142,630 142,000 139,500 139,000
145 14 147,000 138,900 138,000 131,900 131,000
145 24 147,000 134,120 133,000 122,320 121,000
150 6 151,000 147,630 147,000 144,500 144,000
150 16 152,000 142,950 142,000 135,000 134,000
150 24 152,000 139,120 138,000 127,320 126,000
155 6 156,000 152,630 152,000 149,500 149,000
155 16 157,000 147,950 147,000 140,000 139,000
155 24 157,000 144,120 143,000 132,320 131,000
160 6 161,000 157,630 157,000 154,500 154,000
160 16 162,000 152,950 152,000 145,000 144,000
160 28 162,000 147,180 146,000 133,500 132,000
165 6 166,000 162,630 162,000 159,500 159,000
165 16 167,000 157,950 157,000 150,000 149,000
165 28 167,000 152,180 151,000 138,500 137,000
170 6 171,000 167,630 167,000 164,500 164,000
170 16 172,000 162,950 162,000 155,000 154,000
170 28 172,000 157,180 156,000 143,500 142,000
175 8 176,000 171,710 171,000 167,630 167,000
175 16 177,000 167,950 167,000 160,000 159,000
175 28 177,000 162,180 161,000 148,500 147,000
180 8 181,000 176,710 176,000 172,630 172,000
180 18 182,000 172,000 171,000 163,120 162,000
180 28 182,000 167,180 166,000 153,500 152,000

TTabablele 3 3 ((ccoonnttiinnueuedd))
Major
Nominal
Pitch diameter Minor diameter
diameter
diameter Pitch
D P D D D D D
4 min 2 max 2 min 1 max 1 min
185 8 186,000 181,750 181,000 177,630 177,000
185 18 187,000 177,060 176,000 168,120 167,000
185 32 187,000 170,320 169,000 154,600 153,000
190 8 191,000 186,750 186,000 182,630 182,000
190 18 192,000 182,060 181,000 173,120 172,000
190 32 192,000 175,320 174,000 159,600 158,000
195 8 196,000 191,750 191,000 187,630 187,000
195 18 197,000 187,060 186,000 178,120 177,000
195 32 197,000 180,320 179,000 164,600 163,000
200 8 201,000 196,750 196,000 192,630 192,000
200 18 202,000 192,060 191,000 183,120 182,000
200 32 202,000 185,320 184,000 169,600 168,000
210 8 211,000 206,750 206,000 202,630 202,000
210 20 212,000 201,120 200,000 191,180 190,000
210 36 212,000 193,400 192,000 175,800 174,000
220 8 221,000 216,750 216,000 212,630 212,000
220 20 222,000 211,120 210,000 201,180 200,000
220 36 222,000 203,400 202,000 185,800 184,000
230 8 231,000 226,750 226,000 222,630 222,000
230 20 232,000 221,120 220,000 211,180 210,000
230 36 232,000 213,400 212,000 195,800 194,000
240 8 241,000 236,750 236,000 232,630 232,000
240 22 242,000 230,120 229,000 219,250 218,000
240 36 242,000 223,400 222,000 205,800 204,000
250 12 251,000 244,900 244,000 238,800 238,000
250 22 252,000 240,120 239,000 229,250 228,000
250 40 252,000 231,400 230,000 211,900 210,000
260 12 261,000 254,900 254,000 248,800 248,000
260 22 262,000 250,120 249,000 239,250 238,000
260 40 262,000 241,400 240,000 221,900 220,000
270 12 271,000 264,900 264,000 258,800 258,000
270 24 272,000 259,180 258,000 247,320 246,000
270 40 272,000 251,400 250,000 231,900 230,000
280 12 281,000 274,900 274,000 268,800 268,000
280 24 282,000 269,180 268,000 257,320 256,000
280 40 282,000 261,400 260,000 241,900 240,000
290 12 291,000 284,900 284,000 278,800 278,000
290 24 292,000 279,180 278,000 267,320 266,000
290 44 292,000 269,500 268,000 248,000 246,000
300 12 301,000 294,900 294,000 288,800 288,000
300 24 302,000 289,180 288,000 277,320 276,000
300 44 302,000 279,500 278,000 258,000 256,000

Limits of sizes for the internal threads with tolerance class 9H shall be as specified in Table 4.
Table 4 — Limits of sizes for the internal threads with tolerance class 9H.
Dimensions in millimetres
Major
Nominal
Pitch diameter Minor diameter
diameter
diameter Pitch
D P D D D D D
4 min 2 max 2 min 1 max 1 min
8 1,5 8,300 7,605 7,250 6,690 6,500
9 1,5 9,300 8,605 8,250 7,690 7,500
9 2 9,500 8,400 8,000 7,236 7,000
10 1,5 10,300 9,605 9,250 8,690 8,500
10 2 10,500 9,400 9,000 8,236 8,000
11 2 11,500 10,400 10,000 9,236 9,000
11 3 11,500 9,950 9,500 8,315 8,000
12 2 12,500 11,425 11,000 10,236 10,000
12 3 12,500 10,975 10,500 9,315 9,000
14 2 14,500 13,425 13,000 12,236 12,000
14 3 14,500 12,975 12,500 11,315 11,000
16 2 16,500 15,425 15,000 14,236 14,000
16 4 16,500 14,560 14,000 12,375 12,000
18 2 18,500 17,425 17,000 16,236 16,000
18 4 18,500 16,560 16,000 14,375 14,000
20 2 20,500 19,425 19,000 18,236 18,000
20 4 20,500 18,560 18,000 16,375 16,000
22 3 22,500 20,975 20,500 19,315 19,000
22 5 22,500 20,100 19,500 17,450 17,000
22 8 23,000 18,750 18,000 14,630 14,000
24 3 24,500 23,030 22,500 21,315 21,000
24 5 24,500 22,130 21,500 19,450 19,000
24 8 25,000 20,800 20,000 16,630 16,000
26 3 26,500 25,030 24,500 23,315 23,000
26 5 26,500 24,130 23,500 21,450 21,000
26 8 27,000 22,800 22,000 18,630 18,000
28 3 28,500 27,030 26,500 25,315 25,000
28 5 28,500 26,130 25,500 23,450 23,000
28 8 29,000 24,800 24,000 20,630 20,000
30 3 30,500 29,030 28,500 27,315 27,000
30 6 31,000 27,710 27,000 24,500 24,000
30 10 31,000 25,850 25,000 20,710 20,000
32 3 32,500 31,030 30,500 29,315 29,000
32 6 33,000 29,710 29,000 26,500 26,000
32 10 33,000 27,850 27,000 22,710 22,000
34 3 34,500 33,030 32,500 31,315 31,000
34 6 35,000 31,710 31,000 28,500 28,000
34 10 35,000 29,850 29,000 24,710 24,000
36 3 36,500 35,030 34,500 33,315 33,000
36 6 37,000 33,710 33,000 30,500 30,000

TTabablele 4 4 ((ccoonnttiinnueuedd))
Major
Nominal
Pitch diameter Minor diameter
diameter
diameter Pitch
D P D D D D D
4 min 2 max 2 min 1 max 1 min
36 10 37,000 31,850 31,000 26,710 26,000
38 3 38,500 37,030 36,500 35,315 35,000
38 7 39,000 35,250 34,500 31,560 31,000
38 10 39,000 33,850 33,000 28,710 28,000
40 3 40,500 39,030 38,500 37,315 37,000
40 7 41,000 37,250 36,500 33,560 33,000
40 10 41,000 35,850 35,000 30,710 30,000
42 3 42,500 41,030 40,500 39,315 39,000
42 7 43,000 39,250 38,500 35,560 35,000
42 10 43,000 37,850 37,000 32,710 32,000
44 3 44,500 43,030 42,500 41,315 41,000
44 7 45,000 41,250 40,500 37,560 37,000
44 12 45,000 38,900 38,000 32,800 32,000
46 3 46,500 45,060 44,500 43,315 43,000
46 8 47,000 42,850 42,000 38,630 38,000
46 12 47,000 41,000 40,000 34,800 34,000
48 3 48,500 47,060 46,500 45,315 45,000
48 8 49,000 44,850 44,000 40,630 40,000
48 12 49,000 43,000 42,000 36,800 36,000
50 3 50,500 49,060 48,500 47,315 47,000
50 8 51,000 46,850 46,000 42,630 42,000
50 12 51,000 45,000 44,000 38,800 38,000
52 3 52,500 51,060 50,500 49,315 49,000
52 8 53,000 48,850 48,000 44,630 44,000
52 12 53,000 47,000 46,000 40,800 40,000
55 3 55,500 54,060 53,500 52,315 52,000
55 9 56,000 51,400 50,500 46,670 46,000
55 14 57,000 49,060 48,000 41,900 41,000
60 3 60,500 59,060 58,500 57,315 57,000
60 9 61,000 56,400 55,500 51,670 51,000
60 14 62,000 54,060 53,000 46,900 46,000
65 4 65,500 63,630 63,000 61,375 61,000
65 10 66,000 60,900 60,000 55,710 55,000
65 16 67,000 58,120 57,000 50,000 49,000
70 4 70,500 68,630 68,000 66,375 66,000
70 10 71,000 65,900 65,000 60,710 60,000
70 16 72,000 63,120 62,000 55,000 54,000
75 4 75,500 73,630 73,000 71,375 71,000
75 10 76,000 70,900 70,000 65,710 65,000
75 16 77,000 68,120 67,000 60,000 59,000
80 4 80,500 78,630 78,000 76,375 76,000
80 10 81,000 75,900 75,000 70,710 70,000

TTabablele 4 4 ((ccoonnttiinnueuedd))
Major
Nominal
Pitch diameter Minor diameter
diameter
diameter Pitch
D P D D D D D
4 min 2 max 2 min 1 max 1 min
80 16 82,000 73,120 72,000 65,000 64,000
85 4 85,500 83,630 83,000 81,375 81,000
85 12 86,000 80,000 79,000 73,800 73,000
85 18 87,000 77,180 76,000 68,120 67,000
90 4 90,500 88,630 88,000 86,375 86,000
90 12 91,000 85,000 84,000 78,800 78,000
90 18 92,000 82,180 81,000 73,120 72,000
95 4 95,500 93,670 93,000 91,375 91,000
95 12 96,000 90,060 89,000 83,800 83,000
95 18 97,000 87,250 86,000 78,120 77,000
100 4 100,500 98,670 98,000 96,375 96,000
100 12 101,000 95,060 94,000 88,800 88,000
100 20 102,000 91,250 90,000 81,180 80,000
4.3 External threads
Limits of sizes for the external threads with tolerance class 7e shall be as specified in Table 5.
Table 5 — Limits of sizes for the external threads with tolerance class 7e
Dimensions in millimetres
Nominal Major diameter Pitch diameter Minor diameter
diameter Pitch
d d d d d d
max min 2 max 2 min 3 max 3 min
d P
8 1,5 8,000 7,850 7,183 7,013 6,200 5,921
9 1,5 9,000 8,850 8,183 8,013 7,200 6,921
9 2 9,000 8,820 7,929 7,739 6,500 6,191
10 1,5 10,000 9,850 9,183 9,013 8,200 7,921
10 2 10,000 9,820 8,929 8,739 7,500 7,191
11 2 11,000 10,820 9,929 9,739 8,500 8,191
11 3 11,000 10,764 9,415 9,203 7,500 7,150
12 2 12,000 11,820 10,929 10,729 9,500 9,179
12 3 12,000 11,764 10,415 10,191 8,500 8,135
14 2 14,000 13,820 12,929 12,729 11,500 11,179
14 3 14,000 13,764 12,415 12,191 10,500 10,135
16 2 16,000 15,820 14,929 14,729 13,500 13,179
16 4 16,000 15,700 13,905 13,640 11,500 11,074
18 2 18,000 17,820 16,929 16,729 15,500 15,179
18 4 18,000 17,700 15,905 15,640 13,500 13,074
20 2 20,000 19,820 18,929 18,729 17,500 17,179
20 4 20,000 19,700 17,905 17,640 15,500 15,074
22 3 22,000 21,764 20,415 20,191 18,500 18,135
22 5 22,000 21,665 19,394 19,114 16,500 16,044
22 8 22,000 21,550 17,868 17,513 13,000 12,424

TTabablele 5 5 ((ccoonnttiinnueuedd))
Nominal Major diameter Pitch diameter Minor diameter
diameter Pitch
d d d d d d
max min 2 max 2 min 3 max 3 min
d P
24 3 24,000 23,764 22,415 22,165 20,500 20,103
24 5 24,000 23,665 21,394 21,094 18,500 18,019
24 8 24,000 23,550 19,868 19,493 15,000 14,399
26 3 26,000 25,764 24,415 24,165 22,500 22,103
26 5 26,000 25,665 23,394 23,094 20,500 20,019
26 8 26,000 25,550 21,868 21,493 17,000 16,399
28 3 28,000 27,764 26,415 26,165 24,500 24,103
28 5 28,000 27,665 25,394 25,094 22,500 22,019
28 8 28,000 27,550 23,868 23,493 19,000 18,399
30 3 30,000 29,764 28,415 28,165 26,500 26,103
30 6 30,000 29,625 26,882 26,547 23,000 22,463
30 10 30,000 29,470 24,850 24,450 19,000 18,350
32 3 32,000 31,764 30,415 30,165 28,500 28,103
32 6 32,000 31,625 28,882 28,547 25,000 24,463
32 10 32,000 31,470 26,850 26,450 21,000 20,350
34 3 34,000 33,764 32,415 32,165 30,500 30,103
34 6 34,000 33,625 30,882 30,547 27,000 26,463
34 10 34,000 33,470 28,850 28,450 23,000 22,350
36 3 36,000 35,764 34,415 34,165 32,500 32,103
36 6 36,000 35,625 32,882 32,547 29,000 28,463
36 10 36,000 35,470 30,850 30,450 25,000 24,350
38 3 38,000 37,764 36,415 36,165 34,500 34,103
38 7 38,000 37,575 34,375 34,020 30,000 29,431
38 10 38,000 37,470 32,850 32,450 27,000 26,350
40 3 40,000 39,764 38,415 38,165 36,500 36,103
40 7 40,000 39,575 36,375 36,020 32,000 31,431
40 10 40,000 39,470 34,850 34,450 29,000 28,350
42 3 42,000 41,764 40,415 40,165 38,500 38,103
42 7 42,000 41,575 38,375 38,020 34,000 33,431
42 10 42,000 41,470 36,850 36,450 31,000 30,350
44 3 44,000 43,764 42,415 42,165 40,500 40,103
44 7 44,000 43,575 40,375 40,020 36,000 35,431
44 12 44,000 43,400 37,840 37,415 31,000 30,309
46 3 46,000 45,764 44,415 44,150 42,500 42,084
46 8 46,000 45,550 41,868 41,468 37,000 36,368
46 12 46,000 45,400 39,840 39,365 33,000 32,246
48 3 48,000 47,764 46,415 46,150 44,500 44,084
48 8 48,000 47,550 43,868 43,468 39,000 38,368
48 12 48,000 47,400 41,840 41,365 35,000 34,246
50 3 50,000 49,764 48,415 48,150 46,500 46,084
50 8 50,000 49,550 45,868 45,468 41,000 40,368
50 12 50,000 49,400 43,840 43,365 37,000 36,246

TTabablele 5 5 ((ccoonnttiinnueuedd))
Nominal Major diameter Pitch diameter Minor diameter
diameter Pitch
d d d d d d
max min 2 max 2 min 3 max 3 min
d P
52 3 52,000 51,764 50,415 50,150 48,500 48,084
52 8 52,000 51,550 47,868 47,468 43,000 42,368
52 12 52,000 51,400 45,840 45,365 39,000 38,246
55 3 55,000 54,764 53,415 53,150 51,500 51,084
55 9 55,000 54,500 50,360 49,935 45,000 44,329
55 14 55,000 54,330 47,820 47,320 39,000 38,195
60 3 60,000 59,764 58,415 58,150 56,500 56,084
60 9 60,000 59,500 55,360 54,935 50,000 49,329
60 14 60,000 59,330 52,820 52,320 44,000 43,195
65 4 65,000 64,700 62,905 62,605 60,500 60,030
65 10 65,000 64,470 59,850 59,425 54,000 53,319
65 16 65,000 64,290 56,810 56,280 47,000 46,147
70 4 70,000 69,700 67,905 67,605 65,500 65,030
70 10 70,000 69,470 64,850 64,425 59,000 58,319
70 16 70,000 69,290 61,810 61,280 52,000 51,147
75 4 75,000 74,700 72,905 72,605 70,500 70,030
75 10 75,000 74,470 69,850 69,425 64,000 63,319
75 16 75,000 74,290 66,810 66,280 57,000 56,147
80 4 80,000 79,700 77,905 77,605 75,500 75,030
80 10 80,000 79,470 74,850 74,425 69,000 68,319
80 16 80,000 79,290 71,810 71,280 62,000 61,147
85 4 85,000 84,700 82,905 82,605 80,500 80,030
85 12 85,000 84,400 78,840 78,365 72,000 71,246
85 18 85,000 84,200 75,800 75,240 65,000 64,100
90 4 90,000 89,700 87,905 87,605 85,500 85,030
90 12 90,000 89,400 83,840 83,365 77,000 76,246
90 18 90,000 89,200 80,800 80,240 70,000 69,100
95 4 95,000 94,700 92,905 92,590 90,500 90,011
95 12 95,000 94,400 88,840 88,340 82,000 81,215
95 18 95,000 94,200 85,800 85,200 75,000 74,050
100 4 100,000 99,700 97,905 97,590 95,500 95,011
100 12 100,000 99,400 93,840 93,340 87,000 86,215
100 20 100,000 99,150 89,788 89,188 78,000 77,038
105 4 105,000 104,700 102,905 102,590 100,500 100,011
105 12 105,000 104,400 98,840 98,340 92,000 91,215
105 20 105,000 104,150 94,788 94,188 83,000 82,038
110 4 110,000 109,700 107,905 107,590 105,500 105,011
110 12 110,000 109,400 103,840 103,340 97,000 96,215
110 20 110,000 109,150 99,788 99,188 88,000 87,038
115 6 115,000 114,625 111,882 111,507 108,000 107,413
115 14 115,000 114,330 107,820 107,290 99,000 98,157
115 22 115,000 114,100 103,776 103,146 91,000 89,989

TTabablele 5 5 ((ccoonnttiinnueuedd))
Nominal Major diameter Pitch diameter Minor diameter
diameter Pitch
d d d d d d
max min 2 max 2 min 3 max 3 min
d P
120 6 120,000 119,625 116,882 116,507 113,000 112,413
120 14 120,000 119,330 112,820 112,290 104,000 103,157
120 22 120,000 119,100 108,776 108,146 96,000 94,989
125 6 125,000 124,625 121,882 121,507 118,000 117,413
125 14 125,000 124,330 117,820 117,290 109,000 108,157
125 22 125,000 124,100 113,776 113,146 101,000 99,989
130 6 130,000 129,625 126,882 126,507 123,000 122,413
130 14 130,000 129,330 122,820 122,290 114,000 113,157
130 22 130,000 129,100 118,776 118,146 106,000 104,989
135 6 135,000 134,625 131,882 131,507 128,000 127,413
135 14 135,000 134,330 127,820 127,290 119,000 118,157
135 24 135,000 134,050 122,764 122,094 109,000 107,926
140 6 140,000 139,625 136,882 136,507 133,000 132,413
140 14 140,000 139,330 132,820 132,290 124,000 123,157
140 24 140,000 139,050 127,764 127,094 114,000 112,926
145 6 145,000 144,625 141,882 141,507 138,000 137,413
145 14 145,000 144,330 137,820 137,290 129,000 128,157
145 24 145,000 144,050 132,764 132,094 119,000 117,926
150 6 150,000 149,625 146,882 146,507 143,000 142,413
150 16 150,000 149,290 141,810 141,250 132,000 131,110
150 24 150,000 149,050 137,764 137,094 124,000 122,926
155 6 155,000 154,625 151,882 151,507 148,000 147,413
155 16 155,000 154,290 146,810 146,250 137,000 136,110
155 24 155,000 154,050 142,764 142,094 129,000 127,926
160 6 160,000 159,625 156,882 156,507 153,000 152,413
160 16 160,000 159,290 151,810 151,250 142,000 141,110
160 28 160,000 158,940 145,750 145,040 130,000 128,862
165 6 165,000 164,625 161,882 161,507 158,000 157,413
165 16 165,000 164,290 156,810 156,250 147,000 146,110
165 28 165,000 163,940 150,750 150,040 135,000 133,862
170 6 170,000 169,625 166,882 166,507 163,000 162,413
170 16 170,000 169,290 161,810 161,250 152,000 151,110
170 28 170,000 168,940 155,750 155,040 140,000 138,862
175 8 175,000 174,550 170,868 170,443 166,000 165,337
175 16 175,000 174,290 166,810 166,250 157,000 156,110
175 28 175,000 173,940 160,750 160,040 145,000 143,862
180 8 180,000 179,550 175,868 175,443 171,000 170,337
180 18 180,000 179,200 170,800 170,200 160,000 159,050
180 28 180,000 178,940 165,750 165,040 150,000 148,862
185 8 185,000 184,550 180,868 180,418 176,000 175,305
185 18 185,000 184,200 175,800 175,170 165,000 164,013
185 32 185,000 183,880 168,735 167,935 151,000 149,735

TTabablele 5 5 ((ccoonnttiinnueuedd))
Nominal Major diameter Pitch diameter Minor diameter
diameter Pitch
d d d d d d
max min 2 max 2 min 3 max 3 min
d P
190 8 190,000 189,550 185,868 185,418 181,000 180,305
190 18 190,000 189,200 180,800 180,170 170,000 169,013
190 32 190,000 188,880 173,735 172,935 156,000 154,735
195 8 195,000 194,550 190,868 190,418 186,000 185,305
195 18 195,000 194,200 185,800 185,170 175,000 174,013
195 32 195,000 193,880 178,735 177,935 161,000 159,735
200 8 200,000 199,550 195,868 195,418 191,000 190,305
200 18 200,000 199,200 190,800 190,170 180,000 179,013
200 32 200,000 198,880 183,735 182,935 166,000 164,735
210 8 210,000 209,550 205,868 205,418 201,000 200,305
210 20 210,000 209,150 199,788 199,118 188,000 186,950
210 36 210,000 208,750 191,720 190,870 172,000 170,657
220 8 220,000 219,550 215,868 215,418 211,000 210,305
220 20 220,000 219,150 209,788 209,118 198,000 196,950
220 36 220,000 218,750 201,720 200,870 182,000 180,657
230 8 230,000 229,550 225,868 225,418 221,000 220,305
230 20 230,000 229,150 219,788 219,118 208,000 206,950
230 36 230,000 228,750 211,720 210,870 192,000 190,657
240 8 240,000 239,550 235,868 235,418 231,000 230,305
240 22 240,000 239,100 228,776 228,106 216,000 214,938
240 36 240,000 238,750 221,720 220,870 202,000 200,657
250 12 250,000 249,400 243,840 243,310 237,000 236,177
250 22 250,000 249,100 238,776 238,106 226,000 224,938
250 40 250,000 248,680 229,700 228,850 208,000 206,637
260 12 260,000 259,400 253,840 253,310 247,000 246,177
260 22 260,000 259,100 248,776 248,106 236,000 234,938
260 40 260,000 258,680 239,700 238,850 218,000 216,637
270 12 270,000 269,400 263,840 263,310 257,000 256,177
270 24 270,000 269,050 257,764 257,054 244,000 242,876
270 40 270,000 268,680 249,700 248,850 228,000 226,637
280 12 280,000 279,400 273,840 273,310 267,000 266,177
280 24 280,000 279,050 267,764 267,054 254,000 252,876
280 40 280,000 278,680 259,700 258,850 238,000 236,637
290 12 290,000 289,400 283,840 283,310 277,000 276,177
290 24 290,000 289,050 277,764 277,054 264,000 262,876
290 44 290,000 288,600 267,685 266,785 244,000 242,560
300 12 300,000 299,400 293,840 293,310 287,000 286,177
300 24 300,000 299,050 287,764 287,054 274,000 272,876
300 44 300,000 298,600 277,685 276,785 254,000 252,560
Limits of sizes for the external threads with tolerance class 8e shall be as specified in Table 6.

Table 6 — Limits of sizes for the external threads with tolerance class 8e
Dimensions in millimetres
Nominal Major diameter Pitch diameter Minor diameter
diameter Pitch
d d d d d d
max min 2 max 2 min 3 max 3 min
d P
8 1,5 8,000 7,850 7,183 6,971 6,200 5,868
9 1,5 9,000 8,850 8,183 7,971 7,200 6,868
9 2 9,000 8,820 7,929 7,693 6,500 6,134
10 1,5 10,000 9,850 9,183 8,971 8,200 7,868
10 2 10,000 9,820 8,929 8,693 7,500 7,134
11 2 11,000 10,820 9,929 9,693 8,500 8,134
11 3 11,000 10,764 9,415 9,150 7,500 7,084
12 2 12,000 11,820 10,929 10,679 9,500 9,117
12 3 12,000 11,764 10,415 10,135 8,500 8,065
14 2 14,000 13,820 12,929 12,679 11,500 11,117
14 3 14,000 13,764 12,415 12,135 10,500 10,065
16 2 16,000 15,820 14,929 14,679 13,500 13,117
16 4 16,000 15,700 13,905 13,570 11,500 10,986
18 2 18,000 17,820 16,929 16,679 15,500 15,117
18 4 18,000 17,700 15,905 15,570 13,500 12,986
20 2 20,000 19,820 18,929 18,679 17,500 17,117
20 4 20,000 19,700 17,905 17,570 15,500 14,986
22 3 22,000 21,764 20,415 20,135 18,500 18,065
22 5 22,000 21,665 19,394 19,039 16,500 15,950
22 8 22,000 21,550 17,868 17,418 13,000 12,305
24 3 24,000 23,764 22,415 22,100 20,500 20,021
24 5 24,000 23,665 21,394 21,019 18,500 17,925
24 8 24,000 23,550 19,868 19,393 15,000 14,274
26 3 26,000 25,764 24,415 24,100 22,500 22,021
26 5 26,000 25,665 23,394 23,019 20,500 19,925
26 8 26,000 25,550 21,868 21,393 17,000 16,274
28 3 28,000 27,764 26,415 26,100 24,500 24,021
28 5 28,000 27,665 25,394 25,019 22,500 21,925
28 8 28,000 27,550 23,868 23,393 19,000 18,274
30 3 30,000 29,764 28,415 28,100 26,500 26,021
30 6 30,000 29,625 26,882 26,457 23,000 22,351
30 10 30,000 29,470 24,850 24,350 19,000 18,225
32 3 32,000 31,764 30,415 30,100 28,500 28,021
32 6 32,000 31,625 28,882 28,457 25,000 24,351
32 10 32,000 31,470 26,850 26,350 21,000 2
...