ISO 4102:1984
(Main)Equipment for crop protection — Sprayers — Connection threading
Equipment for crop protection — Sprayers — Connection threading
Lays down the essential dimensions of connection threading for sprayers to cover existing and foreseeable needs. Applies to spray tips, nozzles, pressure regulators and nuts of sprayers. Tabulates the metric threads according to ISO 261 (M12, M18, M27), and the gas list threads according to ISO 228/1 (nominal sizes: 1/4, 3/8, 3/4 inch).
Matériel de traitement agropharmaceutique — Pulvérisateurs — Filetages de raccordement
La présente Norme internationale fixe les dimensions essentielles, pour couvrir les nécessités existantes et prévisibles, des filetages de raccordement des pulvérisateurs pour le traitement agropharmaceutique. Elle est applicable aux buses, lances, régulateurs de pression et écrous de pulvérisateurs.
Stroji za zaščito rastlin - Škropilnice - Navoji spojev
General Information
- Status
- Published
- Publication Date
- 31-May-1984
- Technical Committee
- ISO/TC 23/SC 6 - Equipment for crop protection
- Drafting Committee
- ISO/TC 23/SC 6 - Equipment for crop protection
- Current Stage
- 9093 - International Standard confirmed
- Start Date
- 23-Aug-2021
- Completion Date
- 14-Feb-2026
Relations
- Effective Date
- 09-Feb-2026
- Effective Date
- 09-Feb-2026
- Effective Date
- 09-Feb-2026
- Effective Date
- 09-Feb-2026
- Effective Date
- 09-Feb-2026
Overview
ISO 4102:1984 - Equipment for crop protection - Sprayers - Connection threading is an international standard developed by ISO to unify the essential dimensions for thread connections found on crop protection equipment, particularly sprayers. This standard covers both metric and gas list threads for crucial sprayer components such as spray tips, nozzles, pressure regulators, and nuts. It aims to ensure compatibility and interchangeability between equipment parts from different manufacturers, supporting operational efficiency and safety in agricultural spraying activities.
Key Topics
- Thread Dimensions: ISO 4102 specifies the essential sizes and requirements for both metric and gas list threads used in sprayers.
- Metric Threads: Dimensions according to ISO 261, including M12, M18, and M27 thread sizes.
- Gas List Threads: Threads according to ISO 228/1, which include nominal sizes 1/4", 3/8", and 3/4" for effective application in components made of various materials.
- Component Coverage: The standard applies to connection threading on:
- Spray tips
- Nozzles
- Pressure regulators
- Nuts
- Thread Suitability: Preference is given to metric threading, but gas list threads may be more suitable for plastic equipment.
- Interchangeability: By standardizing connection threading, ISO 4102 enhances compatibility between different brands and types of crop protection equipment.
Applications
ISO 4102:1984 brings practical value to manufacturers, agricultural equipment users, and maintenance professionals by ensuring:
- Component Compatibility: Helps prevent mismatched thread issues when connecting nozzles, spray tips, and other components from different suppliers.
- Simplified Maintenance: Standardized threads simplify sourcing of spare parts and reduce downtime for agricultural sprayer repair and maintenance.
- Increased Safety: Accurate component fitting reduces risk of leaks, ensuring chemical sprays are handled safely and effectively during use.
- Global Trade Facilitation: By adhering to internationally recognized thread standards, manufacturers make it easier for their products to be exported and integrated into diverse agricultural markets.
- Support for Modernization: Standardization assists in upgrading and maintaining existing equipment by enabling the use of advanced nozzles and pressure regulators that conform to the established thread specifications.
Common areas of use include:
- Field and crop spraying for pest and weed control
- Orchard and vineyard sprayers
- Greenhouse and horticultural applications
Related Standards
For comprehensive thread specification and further harmonization in agricultural equipment, ISO 4102:1984 references the following standards:
- ISO 261 – General purpose metric screw threads
- ISO 228/1 – Pipe threads where pressure-tight joints are not made on the threads (dimensions and designation)
Other relevant standards for agricultural machinery include:
- ISO 5682 - Equipment for crop protection - Sprayers
- ISO 19932 - Equipment for crop protection - Knapsack sprayers
These references collectively support a robust framework for specifying, designing, and maintaining threaded connections on crop protection sprayers worldwide.
By implementing ISO 4102:1984, manufacturers and users benefit from improved equipment reliability, efficiency, and global compatibility, underscoring its essential role in modern agricultural machinery standardization.
Buy Documents
ISO 4102:1984 - Equipment for crop protection -- Sprayers -- Connection threading
ISO 4102:1984 - Equipment for crop protection — Sprayers — Connection threading/1/1984
ISO 4102:1984 - Matériel de traitement agropharmaceutique -- Pulvérisateurs -- Filetages de raccordement
ISO 4102:1984 - Matériel de traitement agropharmaceutique — Pulvérisateurs — Filetages de raccordement/1/1984
ISO 4102:1984 - Matériel de traitement agropharmaceutique — Pulvérisateurs — Filetages de raccordement/1/1984
Get Certified
Connect with accredited certification bodies for this standard
Control Union Certifications
Global certification for agriculture and sustainability.
ECOCERT
Organic and sustainability certification.
FSC International
Forest Stewardship Council certification.
Sponsored listings
Frequently Asked Questions
ISO 4102:1984 is a standard published by the International Organization for Standardization (ISO). Its full title is "Equipment for crop protection — Sprayers — Connection threading". This standard covers: Lays down the essential dimensions of connection threading for sprayers to cover existing and foreseeable needs. Applies to spray tips, nozzles, pressure regulators and nuts of sprayers. Tabulates the metric threads according to ISO 261 (M12, M18, M27), and the gas list threads according to ISO 228/1 (nominal sizes: 1/4, 3/8, 3/4 inch).
Lays down the essential dimensions of connection threading for sprayers to cover existing and foreseeable needs. Applies to spray tips, nozzles, pressure regulators and nuts of sprayers. Tabulates the metric threads according to ISO 261 (M12, M18, M27), and the gas list threads according to ISO 228/1 (nominal sizes: 1/4, 3/8, 3/4 inch).
ISO 4102:1984 is classified under the following ICS (International Classification for Standards) categories: 65.060.40 - Plant care equipment. The ICS classification helps identify the subject area and facilitates finding related standards.
ISO 4102:1984 has the following relationships with other standards: It is inter standard links to EN 12761-2:2001, EN ISO 16119-3:2013, EN ISO 16119-4:2014, EN 12761-3:2001, EN ISO 16119-2:2013. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
ISO 4102:1984 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-junij-1996
6WURML]D]DãþLWRUDVWOLQâNURSLOQLFH1DYRMLVSRMHY
Equipment for crop protection -- Sprayers -- Connection threading
Matériel de traitement agropharmaceutique -- Pulvérisateurs -- Filetages de
raccordement
Ta slovenski standard je istoveten z: ISO 4102:1984
ICS:
65.060.40 Oprema za nego rastlin Plant care equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
International Standard
INTERNATIONAL ORGANIZATION FOR STANDARDIZATlON.ME)I(C\YHAPO~HAR OPTAHM3ALWl fl0 CTAH~APTbl3AL@lM@ORGANlSATlON INTERNATIONALE DE NORMALISATION
Equipment for crop protection - Sprayers - Connection
threading
Mat&iel de traitement agropharmaceutique - PuMrisateurs - Filetages de raccordement
First edition - 1984-06-15
UDC 631348.45 : 621 l 82.082 Ref. No. IS0 4102-1984 (E)
iii
-
agricultural machinery, agricultural sprayers, junctions, screw threads, dimensions, thread pitch.
m Descriptors :
cn
Price based on 1 page
Foreword
IS0 (the International Organization for Standardization) is a worldwide federation of
national standards bodies (IS0 member bodies). The work of developing international
Standards is carried out through IS0 technical committees. Every member body
interested in a subject for which a technical committee has been authorized has the
right to be represented on that committee. International organizations, governmental
and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated to
the member bodies for approval before their acceptance as International St
...
International Standard
INTERNATIONAL ORGANIZATION FOR STANDARDIZATlON.ME)I(C\YHAPO~HAR OPTAHM3ALWl fl0 CTAH~APTbl3AL@lM@ORGANlSATlON INTERNATIONALE DE NORMALISATION
Equipment for crop protection - Sprayers - Connection
threading
Mat&iel de traitement agropharmaceutique - PuMrisateurs - Filetages de raccordement
First edition - 1984-06-15
UDC 631348.45 : 621 l 82.082 Ref. No. IS0 4102-1984 (E)
iii
-
agricultural machinery, agricultural sprayers, junctions, screw threads, dimensions, thread pitch.
m Descriptors :
cn
Price based on 1 page
Foreword
IS0 (the International Organization for Standardization) is a worldwide federation of
national standards bodies (IS0 member bodies). The work of developing international
Standards is carried out through IS0 technical committees. Every member body
interested in a subject for which a technical committee has been authorized has the
right to be represented on that committee. International organizations, governmental
and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated to
the member bodies for approval before their acceptance as International Standards by
the IS0 Council.
International Standard IS0 4102 was developed by Technical Committee lSO/TC 23,
Tractors and machinery for agriculture and forestry, and was circulated to the member
bodies in March 1983.
It has been approved by the member bodies of the following countries:
Australia
Finland Portugal
Austria
France Romania
Belgium
Germany, F. R.
South
...
International Standard
INTERNATIONAL ORGANIZATION FOR STANDARDIZATlON.ME)I(C\YHAPO~HAR OPTAHM3ALWl fl0 CTAH~APTbl3AL@lM@ORGANlSATlON INTERNATIONALE DE NORMALISATION
Equipment for crop protection - Sprayers - Connection
threading
Mat&iel de traitement agropharmaceutique - PuMrisateurs - Filetages de raccordement
First edition - 1984-06-15
UDC 631348.45 : 621 l 82.082 Ref. No. IS0 4102-1984 (E)
iii
-
agricultural machinery, agricultural sprayers, junctions, screw threads, dimensions, thread pitch.
m Descriptors :
cn
Price based on 1 page
Foreword
IS0 (the International Organization for Standardization) is a worldwide federation of
national standards bodies (IS0 member bodies). The work of developing international
Standards is carried out through IS0 technical committees. Every member body
interested in a subject for which a technical committee has been authorized has the
right to be represented on that committee. International organizations, governmental
and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated to
the member bodies for approval before their acceptance as International Standards by
the IS0 Council.
International Standard IS0 4102 was developed by Technical Committee lSO/TC 23,
Tractors and machinery for agriculture and forestry, and was circulated to the member
bodies in March 1983.
It has been approved by the member bodies of the following countries:
Australia
Finland Portugal
Austria
France Romania
Belgium
Germany, F. R.
South
...
Norme internationale
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION.ME)I(~YHAPO~HAR OPrAHl43ALlMR fl0 CTAHAAPTM3ALWlM.ORGANISATlON INTERNATIONALE DE NORMALISATION
Matériel de traitement agropharmaceutique -
- Filetages de raccordement
Pulvérisateurs
Equipment for trop protection - Spra yers - Connection threading
Première édition - 1984-06-15
CDU 631348.45 : 621 B82.082 Réf. no : ISO 4102-1984 (F)
Descripteurs : machine agricole, pulvérisateur agricole, raccordement, filetage, dimension, pas de vis.
Prix basé sur 1 page
Avant-propos
L’ISO (Organisation internationale de normalisation) est une fédération mondiale
d’organismes nationaux de normalisation (comités membres de I’ISO). L’élaboration
des Normes internationales est confiée aux comités techniques de I’ISO. Chaque
comité membre intéressé par une étude a le droit de faire partie du comité technique
correspondant. Les organisations internationales, gouvernementales et non gouverne-
mentales, en liaison avec I’ISO, participent également aux travaux.
Les projets de Normes internationales adoptés par les comités techniques sont soumis
aux comités membres pour approbation, avant leur acceptation comme Normes inter-
nationales par le Conseil de I’ISO.
La Norme internationale ISO 4102 a été élaborée par le comité technique ISO/TC 23,
Tracteurs et matériels agricoles et forestiers, et a été soumise aux comités membres en
mars 1983.
Les comités membres des pays suivants l’ont approuvée:
Afrique du Sud, Rép. d’
Danemark Pologne
Allemagne, R. F.
Égypte, Rép. arabe d’ Portugal
Australie Espagne Roumanie
Autric
...
Norme internationale
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION.ME)I(~YHAPO~HAR OPrAHl43ALlMR fl0 CTAHAAPTM3ALWlM.ORGANISATlON INTERNATIONALE DE NORMALISATION
Matériel de traitement agropharmaceutique -
- Filetages de raccordement
Pulvérisateurs
Equipment for trop protection - Spra yers - Connection threading
Première édition - 1984-06-15
CDU 631348.45 : 621 B82.082 Réf. no : ISO 4102-1984 (F)
Descripteurs : machine agricole, pulvérisateur agricole, raccordement, filetage, dimension, pas de vis.
Prix basé sur 1 page
Avant-propos
L’ISO (Organisation internationale de normalisation) est une fédération mondiale
d’organismes nationaux de normalisation (comités membres de I’ISO). L’élaboration
des Normes internationales est confiée aux comités techniques de I’ISO. Chaque
comité membre intéressé par une étude a le droit de faire partie du comité technique
correspondant. Les organisations internationales, gouvernementales et non gouverne-
mentales, en liaison avec I’ISO, participent également aux travaux.
Les projets de Normes internationales adoptés par les comités techniques sont soumis
aux comités membres pour approbation, avant leur acceptation comme Normes inter-
nationales par le Conseil de I’ISO.
La Norme internationale ISO 4102 a été élaborée par le comité technique ISO/TC 23,
Tracteurs et matériels agricoles et forestiers, et a été soumise aux comités membres en
mars 1983.
Les comités membres des pays suivants l’ont approuvée:
Afrique du Sud, Rép. d’
Danemark Pologne
Allemagne, R. F.
Égypte, Rép. arabe d’ Portugal
Australie Espagne Roumanie
Autric
...
Norme internationale
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION.ME)I(~YHAPO~HAR OPrAHl43ALlMR fl0 CTAHAAPTM3ALWlM.ORGANISATlON INTERNATIONALE DE NORMALISATION
Matériel de traitement agropharmaceutique -
- Filetages de raccordement
Pulvérisateurs
Equipment for trop protection - Spra yers - Connection threading
Première édition - 1984-06-15
CDU 631348.45 : 621 B82.082 Réf. no : ISO 4102-1984 (F)
Descripteurs : machine agricole, pulvérisateur agricole, raccordement, filetage, dimension, pas de vis.
Prix basé sur 1 page
Avant-propos
L’ISO (Organisation internationale de normalisation) est une fédération mondiale
d’organismes nationaux de normalisation (comités membres de I’ISO). L’élaboration
des Normes internationales est confiée aux comités techniques de I’ISO. Chaque
comité membre intéressé par une étude a le droit de faire partie du comité technique
correspondant. Les organisations internationales, gouvernementales et non gouverne-
mentales, en liaison avec I’ISO, participent également aux travaux.
Les projets de Normes internationales adoptés par les comités techniques sont soumis
aux comités membres pour approbation, avant leur acceptation comme Normes inter-
nationales par le Conseil de I’ISO.
La Norme internationale ISO 4102 a été élaborée par le comité technique ISO/TC 23,
Tracteurs et matériels agricoles et forestiers, et a été soumise aux comités membres en
mars 1983.
Les comités membres des pays suivants l’ont approuvée:
Afrique du Sud, Rép. d’
Danemark Pologne
Allemagne, R. F.
Égypte, Rép. arabe d’ Portugal
Australie Espagne Roumanie
Autric
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...