ISO 1101:2017
(Main)Geometrical product specifications (GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out
Geometrical product specifications (GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out
ISO 1101:2017 defines the symbol language for geometrical specification of workpieces and the rules for its interpretation. It provides the foundation for geometrical specification. The illustrations in this document are intended to illustrate how a specification can be fully indicated with visible annotation (including e.g. TEDs). NOTE 1 Other International Standards referenced in Clause 2 and in Tables 3 and 4 provide more detailed information on geometrical tolerancing. NOTE 2 This document gives rules for explicit and direct indications of geometrical specifications. Alternatively, the same specifications can be indicated indirectly in accordance with ISO 16792 by attaching them to a 3D CAD model. In this case, it is possible that some elements of the specification are available through a query function or other interrogation of information on the model instead of being indicated using visible annotation
Spécification géométrique des produits (GPS) — Tolérancement géométrique — Tolérancement de forme, orientation, position et battement
ISO 1101:2017 définit le langage symbolique utilisé pour la spécification géométrique des pièces, ainsi que ses règles d'interprétation. Il établit la base de la spécification géométrique. Les illustrations du présent document visent à illustrer la façon dont une spécification peut être indiquée dans son intégralité avec annotation visible (y compris par exemple les TEDs). NOTE 1 D'autres Normes internationales, citées à l'Article 2 et dans les Tableaux 3 et 4, fournissent des informations plus détaillées sur le tolérancement géométrique. NOTE 2 Le présent document spécifie les règles pour des indications explicites et directes des spécifications géométriques. Les mêmes spécifications peuvent également être indiquées de façon indirecte, conformément à l'ISO 16792, en les rattachant à un modèle CAO en 3D. Dans ce cas, il est possible que certains éléments de la spécification soient disponibles par une fonction de requête ou d'une autre méthode d'interrogation des informations sur le modèle, plutôt que d'être indiqués au moyen d'une annotation visible.
General Information
Relations
Standards Content (Sample)
INTERNATIONAL ISO
STANDARD 1101
Fourth edition
2017-02
Geometrical product specifications
(GPS) — Geometrical tolerancing
— Tolerances of form, orientation,
location and run-out
Spécification géométrique des produits (GPS) — Tolérancement
géométrique — Tolérancement de forme, orientation, position et
battement
Reference number
©
ISO 2017
© ISO 2017, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2017 – All rights reserved
Contents Page
Foreword .vi
Introduction .vii
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Basic concepts . 4
5 Symbols . 6
6 Toleranced features . 9
7 Tolerance zones .12
7.1 Tolerance zone defaults .12
7.2 Tolerance zones of variable width .13
7.3 Orientation of tolerance zones for derived features .13
7.4 Cylindrical and spherical tolerance zones .13
8 Geometrical specification indication .14
8.1 General .14
8.2 Tolerance indicator .14
8.2.1 Symbol section .14
8.2.2 Zone, feature and characteristic section .14
8.2.3 Datum section.35
8.3 Plane and feature indicators .35
8.4 Indications adjacent to the tolerance indicator .36
8.4.1 General.36
8.4.2 Toleranced feature identifiers .36
8.4.3 Patterns .38
8.4.4 Adjacent indication sequence .38
8.5 Stacked tolerance indications .38
8.6 Indication of drawing defaults .38
9 Supplementary indications .39
9.1 Indications of a compound or restricted toleranced feature .39
9.1.1 General.39
9.1.2 All around and all over — Continuous, closed tolerance feature .39
9.1.3 Restricted area toleranced feature .42
9.1.4 Continuous, non-closed toleranced feature .44
9.2 Moveable assemblies .45
10 Theoretically exact dimensions (TED) .46
11 Restrictive specifications .46
12 Projected toleranced feature .48
13 Intersection planes .52
13.1 Role of intersection planes .52
13.2 Features to be used for establishing a family of intersection planes .52
13.3 Graphical language .52
13.4 Rules .52
14 Orientation planes .55
14.1 Role of orientation planes .55
14.2 Features to be used for establishing orientation planes .55
14.3 Graphical language .55
14.4 Rules .55
15 Direction feature .57
15.1 Role of direction features .57
15.2 Features to be used for establishing direction features .59
15.3 Graphical language .59
15.4 Rules .59
16 Collection plane .60
16.1 Role of collection planes .60
16.2 Features to be used for establishing collection planes .61
16.3 Graphical language .61
16.4 Rules .61
17 Definitions of geometrical specifications .61
17.1 General .61
17.2 Straightness specification .61
17.3 Flatness specification .64
17.4 Roundness specification .64
17.5 Cylindricity specification .66
17.6 Line profile specification not related to a datum .67
17.7 Line profile specification related to a datum system .68
17.8 Surface profile specification not related to a datum.70
17.9 Surface profile specification related to a datum .70
17.10 Parallelism specification .71
17.10.1 General.71
17.10.2 Parallelism specification of a median line related to a datum system .72
17.10.3 Parallelism specification of a median line related to a datum straight line .75
17.10.4 Parallelism specification of a median line related to a datum plane .76
17.10.5 Parallelism specification of a set of lines in a surface related to a datum plane .77
17.10.6 Parallelism specification of a planar surface related to a datum straight line .77
17.10.7 Parallelism specification of a planar surface related to a datum plane .78
17.11 Perpendicularity specification .
...
NORME ISO
INTERNATIONALE 1101
Quatrième édition
2017-02
Spécification géométrique des
produits (GPS) — Tolérancement
géométrique — Tolérancement
de forme, orientation, position et
battement
Geometrical product specifications (GPS) — Geometrical tolerancing
— Tolerances of form, orientation, location and run-out
Numéro de référence
©
ISO 2017
DOCUMENT PROTÉGÉ PAR COPYRIGHT
© ISO 2017, Publié en Suisse
Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite ni utilisée
sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie, l’affichage sur
l’internet ou sur un Intranet, sans autorisation écrite préalable. Les demandes d’autorisation peuvent être adressées à l’ISO à
l’adresse ci-après ou au comité membre de l’ISO dans le pays du demandeur.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2017 – Tous droits réservés
Sommaire Page
Avant-propos .vi
Introduction .vii
1 Domaine d’application .1
2 Références normatives .1
3 Termes et définitions . 2
4 Concepts de base .4
5 Symboles . 7
6 Éléments tolérancés .10
7 Zones de tolérance .13
7.1 Zone de tolérance par défaut .13
7.2 Zones de tolérance de largeur variable .14
7.3 Orientation des zones de tolérance pour les éléments dérivés .14
7.4 Zones de tolérance cylindriques et sphériques .14
8 Indication de spécification géométrique .15
8.1 Généralités .15
8.2 Indicateur de tolérance .15
8.2.1 Section «Symbole» .15
8.2.2 Section «Zone, élément et caractéristique» .15
8.2.3 Section «références spécifiées» .36
8.3 Indicateurs de plan et d’élément .36
8.4 Indications adjacentes à l’indicateur de tolérance .37
8.4.1 Généralités .37
8.4.2 Identificateurs d’élément tolérancé .37
8.4.3 Groupes d’élément .39
8.4.4 Ordre d’indication adjacente .39
8.5 Indications de tolérances empilées .39
8.6 Indication des cas par défaut d’un dessin .40
9 Indications complémentaires .40
9.1 Indications d’un élément tolérancé composé ou restreint .40
9.1.1 Généralités .40
9.1.2 Tout autour et sur toute la pièce — Élément tolérancé continu fermé .41
9.1.3 Élément tolérancé en zone restreinte .43
9.1.4 Élément tolérancé continu non fermé .45
9.2 Assemblages mobiles .47
10 Dimensions théoriques exactes (TED) .47
11 Spécifications restrictives .48
12 Élément tolérancé projeté .50
13 Plans d’intersection .54
13.1 Rôle des plans d’intersection .54
13.2 Éléments à utiliser pour établir une famille de plans d’intersection .54
13.3 Langage graphique .54
13.4 Règles .54
14 Plans d’orientation .57
14.1 Rôle des plans d’orientation .57
14.2 Éléments à utiliser pour définir des plans d’orientation .57
14.3 Langage graphique .57
14.4 Règles .58
15 Élément de direction .59
15.1 Rôle des éléments de direction .59
15.2 Éléments à utiliser pour établir des éléments de direction .61
15.3 Langage graphique .61
15.4 Règles .62
16 Plan de collection .63
16.1 Rôle des plans de collection .63
16.2 Éléments à utiliser pour définir des plans de collection .63
16.3 Langage graphique .63
16.4 Règles .63
17 Définitions des spécifications géométriques .63
17.1 Généralités .63
17.2 Spécification de rectitude .63
17.3 Spécification de planéité .66
17.4 Spécification de circularité .66
17.5 Spécification de cylindricité .68
17.6 Spécification de profil de ligne ne se rapportant pas à une référence spécifiée .69
17.7 Spécification de profil de ligne se rapportant à un système de références spécifiées .71
17.8 Spécification de profil de surface ne se rapportant pas à une référence spécifiée .72
17.9 Spécification de profil de surface se rapportant à une référence spécifiée .73
17.10 Spécification de parallélisme .74
17.10.1 Généralités .74
17.10.2 Spécification de parallélisme d’une ligne médiane par rapport à un
système de références spécifiées .74
17.10.3 Spécification de parallélisme d’une ligne médiane par rapport à une
droite de référence spécifiée .77
17.10.4 Spécification de parallélisme d’une ligne médiane par rapport à un plan
de référence spécifiée .78
17.10.5 Spécification de parallélisme d’un ensemble de lignes d’une surface par
rapport à un plan de référence spécifiée .79
17.10.6 Spécification de parallélisme d’une surface plane par rapport à une droite
de référence spécifiée .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.