Abstract

This document provides a list of International Standards that can be completely or partly applied in the design of tower cranes. The bibliography refers to other useful documents (FEM publications, European standards and national standards).

Status
Published
Publication Date
08-Nov-2026
Technical Committee
ISO/TC 96/SC 7 - Tower cranes
Current Stage
6060 - International Standard published
Start Date
09-Nov-2026
Completion Date
09-Nov-2026

Buy Documents

Technical report

ISO/TR 27245:2026 - Cranes — Tower cranes — International Standards for design, manufacture, use and maintenance requirements and recommendations

Release Date:09-Nov-2026
English language (11 pages)
sale 15% off
Preview
sale 15% off
Preview

ISO/TR 27245:2026 is an ISO Technical Report about tower cranes. It collects International Standards that can be applied completely or partly in the design, manufacture, use and maintenance of tower cranes, and it also points to other useful documents in its bibliography. It is meant for people who need to choose the right standards for tower crane work, including designers, manufacturers, operators, maintainers and buyers.

What does ISO/TR 27245:2026 specify?

ISO/TR 27245:2026 specifies a curated list of standards relevant to tower cranes, rather than technical requirements of its own. Its scope is limited to International Standards that can support tower crane design, and its bibliography points to additional FEM publications, European standards and national standards.

The document is organized into:

  • Clause 4.1, which lists the particular International Standards for tower cranes.
  • Clause 4.2, which groups additional useful standards by topic:
    • general machinery safety
    • electrical requirements
    • acoustics
    • graphical symbols

That structure matters in practice because it helps a project team separate the core tower-crane standards from broader standards that may be needed for the machine, the controls, the instructions or the site.

What are the key requirements of ISO/TR 27245:2026?

ISO/TR 27245:2026 does not set design rules itself. Its practical value is that it points readers to the standards that cover the main technical decisions for a tower crane.

Design basis, loads and structural competence

Clause 4.1 highlights ISO 4301-3 for tower-crane classification, ISO 8686-3 for load combinations, ISO 4302 for wind load assessment, and ISO 20332 for proof of competence of steel structures. It also cites ISO 11031 for seismic design and ISO 23778 for hydraulic cylinders in crane applications.

In practice, these standards are the starting point for defining the duty class, calculating loads and checking whether the structure and major components can withstand the intended use. ISO 4301-3 is especially relevant because tower cranes for construction work are treated as hook-only cranes, while other uses can require different values.

Components and mechanisms

Clause 4.1 points to ISO 4309 for wire ropes, ISO 10972-3 for tower-crane mechanisms, ISO 16625 for selecting wire ropes, drums and sheaves, ISO 16881-1 for wheel/rail contacts, and ISO 17440 for forged steel hooks. These standards support the mechanical design of parts that carry or guide the load.

In practice, they help engineers specify the right ropes, drums, hooks, wheels and mechanism arrangements, and they support checks on wear, geometry and local stresses.

Operation, inspection, maintenance and training

Clause 4.1 includes ISO 12480-3 for safe use, ISO 9927-3 for regular inspections, ISO 9926-3 for operator training, ISO 23853 for slinger and signaller training, ISO 12478-1 for maintenance manuals, and ISO 10973 for spare parts manuals.

In practice, these standards shape the operating procedures, inspection routines, maintenance documentation and training plan that keep a tower crane in service in a controlled way.

Controls, access and information

Clause 4.1 also points to ISO 7752-3 for control layout, ISO 8566-3 for cabins and control stations, ISO 10245-3 for limiting and indicating devices, ISO 11660-3 for access, guards and restraints, ISO 7296-3 for graphical symbols, and ISO 9942-3 for information labels.

In practice, these are the references used when a tower crane needs operator controls, labels, symbols, guarding and access arrangements that are consistent and easy to use.

General machinery, electrical and noise-related support standards

Clause 4.2 adds ISO 12100, ISO 13849-1, ISO 20607, IEC 60204-32, IEC 62745 and the listed acoustics and graphical-symbol standards. These are useful when a tower crane project also needs risk assessment, safety-related control-system design, electrical equipment requirements, cableless controls, noise declaration or standardized safety signs.

Who uses ISO/TR 27245:2026?

ISO/TR 27245:2026 is used by crane designers, manufacturers, technical purchasers, conformity and safety engineers, inspectors, maintenance planners and training providers. It is also useful for site managers and buyers who need to know which standards apply to the crane itself and which apply to its operation, documentation or accessories. In practice, it helps teams build a standards list for specification, design review, procurement and maintenance planning.

What changed in ISO/TR 27245:2026 from the previous edition?

ISO/TR 27245:2026 is the second edition and it cancels and replaces ISO/TR 27245:2007. The foreword states that the list of standards applicable to tower cranes has been updated, and Annex A has been removed.

Which standards are used with ISO/TR 27245:2026?

ISO/TR 27245:2026 names a broad set of companion standards. The most relevant groups are:

Standard groupWhat it contributes
ISO 4301-1, ISO 4301-3, ISO 4306-1, ISO 4306-3Classification and vocabulary for cranes and tower cranes
ISO 4302, ISO 8686-1, ISO 8686-3, ISO 20332, ISO 11031, ISO 23778Loads, load combinations, structural competence, seismic design and hydraulic cylinders
ISO 4309, ISO 10972-1, ISO 10972-3, ISO 16625, ISO 16881-1, ISO 17440Wire ropes, mechanisms, rope selection, wheel/rail contacts and hooks
ISO 4310, ISO 9926-3, ISO 9927-3, ISO 12480-3, ISO 12478-1, ISO 10973, ISO 23853Tests, training, inspections, safe use, maintenance and spare parts
ISO 7752-3, ISO 8566-3, ISO 10245-3, ISO 11660-3, ISO 7296-3, ISO 9942-3Controls, cabins, limiting devices, access, symbols and labels
ISO 12100, ISO 13849-1, ISO 20607, IEC 60204-32, IEC 62745Machinery safety, control-system safety, instruction handbooks and electrical equipment
ISO 3744, ISO 4871, ISO 11203, ISO/TR 11688-1, ISO/TR 11688-2Noise measurement, declaration and low-noise design guidance
ISO 3864-1, ISO 3864-2, ISO 3864-3, ISO 7000, ISO 7010Safety colours, signs and graphical symbols

What does the ISO/TR 27245:2026 document contain?

ISO/TR 27245:2026 is essentially a standards map for tower cranes. Clause 4.1 gives the tower-crane-specific standards, and clause 4.2 adds broader standards for safety of machinery, electrical equipment, acoustics and graphical symbols. The bibliography then extends the list to other industry references such as FEM, EN, AS, BS and ASME documents, which makes the report useful as a starting point for technical specification and document control.

Relations

Effective Date
20-Apr-2024

Buy Documents

Technical report

ISO/TR 27245:2026 - Cranes — Tower cranes — International Standards for design, manufacture, use and maintenance requirements and recommendations

Release Date:09-Nov-2026
English language (11 pages)
sale 15% off
Preview
sale 15% off
Preview

Frequently Asked Questions

ISO/TR 27245:2026 is a technical report published by the International Organization for Standardization (ISO). Its full title is "Cranes — Tower cranes — International Standards for design, manufacture, use and maintenance requirements and recommendations". This standard covers: This document provides a list of International Standards that can be completely or partly applied in the design of tower cranes. The bibliography refers to other useful documents (FEM publications, European standards and national standards).

This document provides a list of International Standards that can be completely or partly applied in the design of tower cranes. The bibliography refers to other useful documents (FEM publications, European standards and national standards).

ISO/TR 27245:2026 is classified under the following ICS (International Classification for Standards) categories: 53.020.20 - Cranes. The ICS classification helps identify the subject area and facilitates finding related standards.

ISO/TR 27245:2026 has the following relationships with other standards: It is inter standard links to ISO/TR 27245:2007. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

ISO/TR 27245:2026 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.

Standards Content (Sample)


Technical
Report
ISO/TR 27245
Second edition
Cranes — Tower cranes —
2026-11
International Standards for
design, manufacture, use and
maintenance requirements and
recommendations
Appareils de levage à charge suspendue — Grues à tour —
Normes internationales sur les exigences et les recommandations
de conception, de fabrication, d'utilisation et de maintenance
Reference number
© ISO 2026
All rights reserved.
This ISO publication is protected by copyright and is owned by ISO and/or its licensors.
The content of this ISO publication is provided under licence, not sold. Use is subject to the applicable licence terms issued by ISO,
an ISO member body, or an authorized third-party distributor.
Except as required for implementation or expressly permitted by a separate licence, no part of this ISO publication may be
reproduced, distributed, modified, used, or made available in any form or by any means – electronic or mechanical, including
photocopying, scanning, recording, or posting on internal or external digital platforms.
Any use beyond the scope of the granted rights is prohibited and may result in legal action.
ISO copyright office
CP 401 • CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 International Standards for tower cranes . 1
4.1 Particular International Standards for tower cranes .1
4.2 Additional International Standards useful for tower cranes .7
4.2.1 General standards (by ISO/TC 199, Safety of machinery).7
4.2.2 IEC standards for electrical requirements (by IEC/TC 44, Safety of machinery -
Electrotechnical aspects) .8
4.2.3 ISO standards for acoustics (by ISO/TC 43, Acoustics, SC 1, Noise) .9
4.2.4 Graphical symbols (by ISO/TC 145, Graphical symbols) .9
Bibliography .11

iii
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types
of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent
rights in respect thereof. As of the date of publication of this document, ISO had not received notice of (a)
patent(s) which may be required to implement this document. However, implementers are cautioned that
this may not represent the latest information, which may be obtained from the patent database available at
www.iso.org/patents. ISO shall not be held responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions
related to conformity assessment, as well as information about ISO's adherence to the World Trade
Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 96, Cranes, Subcommittee SC 7, Tower cranes.
This second edition cancels and replaces the first edition (ISO/TR 27245:2007), which has been technically
revised.
The main changes are as follows:
— the list of standards applicable to tower cranes has been updated;
— Annex A has been removed.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.

iv
Technical Report ISO/TR 27245:2026(en)
Cranes — Tower cranes — International Standards for
design, manufacture, use and maintenance requirements and
recommendations
1 Scope
This document provides a list of International Standards that can be completely or partly applied in the
design of tower cranes. The bibliography refers to other useful documents (FEM publications, European
standards and national standards).
2 Normative references
There are no normative references in this document.
3 Terms and definitions
No terms and definitions are listed in this document.
ISO and IEC maintain terminology databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https:// www .iso .org/ obp
— IEC Electropedia: available at https:// www .electropedia .org/
4 International Standards for tower cranes
4.1 Particular International Standards for tower cranes
ISO 4301-1 Cranes — Classification — Part 1: General
Abstract: It establishes a general classification of cranes and mechanisms based on
the service conditions, mainly expressed by the following:
—  the total number of working cycles to be carried out during the specified design
life of the crane;
—  the load spectrum factor which represents the relative frequencies of loads to be
handled;
—  the average displacements.

ISO 4301-3 Cranes — Classification — Part 3: Tower cranes
Abstract: It provides the classification of tower cranes for construction work as
defined in ISO 4306-3, and gives specific requirements for steel supporting structure,
mechanisms, ropes and further components basing on standard service conditions,
mainly expressed by the following:
—  the number of working cycles;
—  the load spectrum factor;
—  the average displacements;
—  additional values for factors to be used at the structural or mechanical calcula-
tion.
Tower cranes for construction work are exclusively equipped with a hook as
load-handling device.
For tower cranes intended to be used for other purposes and/or equipped with other
load handling devices, other values according to the specified usage of the tower
crane can result.
ISO 4302 Cranes — Wind load assessment
Abstract: It establishes general methods for calculating wind loads (for in-service
and out-of-service conditions), which are included in the load combinations stated in
ISO 8686-1 and used for proofs of competence such as those given in ISO 20332 for
the structural components of cranes.
It provides a simplified method of calculation and assumes that:
—  the wind can blow horizontally from any direction;
—  the wind blows at a constant speed;
—  there is a static reaction to the wind load applied to the crane structure.
It includes built-in allowances for the effects of gusting (fluctuation in wind speed)
and for dynamic response. It gives guidance on when to secure the crane for out-of-
service conditions.
ISO 4306-1 Cranes — Vocabulary — Part 1: General
Abstract: It establishes a vocabulary of the most commonly used terms in the field
of cranes and defines terms concerning the main crane types and classifications,
parameters, general concepts and component parts.
ISO 4306-3 Cranes — Vocabulary — Part 3: Tower cranes
Abstract: It establishes a vocabulary of the most commonly used terms in the field of
cranes.
It gives the general definition of a tower crane and illustrates the terminology used
with each type of tower crane by the use of figures with referenced term numbers.
It is applicable to
—  tower cranes that can be assembled and dismantled (by element or self-erecting
cranes),
—  permanently erected tower cranes, and
—  mobile self-erecting tower cranes.
It is not applicable to
—  mobile cranes, or
—  erection masts, with or without jibs.

ISO 4309 Cranes — Wire ropes — Care and maintenance, inspection and discard
Abstract: It establishes general principles for the care and maintenance, and inspec-
tion and discard of steel wire ropes used on cranes and hoists.
In addition to guidance on storage, handling, installation and maintenance, it pro-
vides discard criteria for those running ropes which are subjected to multi-layer
spooling, where both field experience and testing demonstrate that deterioration is
significantly greater at the crossover zones on the drum than at any other section of
rope in the system.
It also provides more realistic discard criteria covering decreases in rope diameter
and corrosion and gives a method for assessing the combined effect of deterioration
at any position in the rope.
It applies to rope on cranes, winches and hoists used for hook, grabbing, magnet,
ladle, excavator or stacking duties, whether operated manually, electrically or hy-
draulically.
It also applies to rope used on hoists and hoist blocks.
ISO 4310 Cranes — Test code and procedures
Abstract: It specifies tests, inspections and procedures for verifying the conformance
of a crane with its operational specifications and capability to lift rated loads.
ISO 7296-1 Cranes — Graphical symbols — Part 1: General
Abstract: It gives 67 symbols and defines the various colours to be used with cranes.
It contains the alphabetical indexes in English, French and Russian.
ISO 7296-3 Cranes — Graphic symbols — Part 3: Tower cranes
Abstract: It establishes graphical symbols for use on operator controls and other
displays on tower cranes as defined in ISO 4306-3.
ISO 7752-1 Cranes — Control layout and characteristics — Part 1: General principles
Abstract: It establishes principles and requirements for the controls of cranes. It
deals with the arrangement of those controls used in positioning loads and serves
as a general basis for the elaboration of detailed standards covering the controls of
particular types of cranes.
ISO 7752-3 Cranes — Control layout and characteristics — Part 3: Tower cranes
Abstract: It specifies the particular requirements for controls for tower cranes as de-
fined in ISO 4306-3 and the arrangement of basic control used for positioning loads.
NOTE For the general principles and requirements for the controls of cranes, see
ISO 7752-1.
ISO 8566-1 Cranes — Cabins and control stations — Part 1: General
Abstract: It specifies the general requirements for cabins and control stations from
which cranes, as defined in ISO 4306-1, are operated.
ISO 8566-3 Cranes — Cabins and control stations — Part 3: Tower cranes
Abstract: It specifies the requirements for cabins and control stations for tower
cranes as defined in ISO 4306-3. It is intended to be used in conjunction with
ISO 8566-1.
ISO 8686-1 Cranes — Design principles for loads and load combinations — Part 1: General
Abstract: It establishes general methods for the calculating loads and principles to
be used in the selection of load combinations for proofs of competence in accordance
with ISO 20332 for the structural and mechanical components of cranes as defined in
ISO 4306-1.
It is based on rigid body kinetic analysis and elastostatic analysis but expressly per-
mits the use of more advanced methods (calculations or tests) to evaluate the effects
of loads and load combinations, and the values of dynamic load factors, where it can
be demonstrated that these provide at least equivalent levels of competence.
It provides for two distinct kinds of application:
a)  the general form, content and ranges of parameter values for more specific stand-
ards to be developed for specific types of cranes;
b)  a framework for agreement on loads and load combinations between a design-
er or manufacturer and a crane purchaser for those types of cranes where specific
standards do not exist.
ISO 8686-3 Cranes — Design principles for loads and load combinations — Part 3: Tower cranes
Abstract: It establishes the application of ISO 8686-1 to tower cranes for construction
work as defined in ISO 4306-3 and gives specific requirements and values for factors
to be used at the structural calculation.
Tower cranes for construction work are exclusively equipped with a hook as the
load-handling device.
For tower cranes intended to be used for other purposes and/or with other load-han-
dling devices, other values can be necessary according to the tower crane usage
specification.
ISO 9926-1 Cranes — Training of drivers — Part 1: General
Abstract: It specifies the minimum training to be given to trainee drivers of cranes,
to develop basic operational skills and to impart the requisite knowledge for the
proper use of those skills.
It defines the overall training scheme within which specific training should be given
for each type of crane (for example tower cranes, mobile cranes).
It assumes that the trainees have no previous practical experience in driving cranes.
It does not specify any procedure for evaluating their capabilities or qualifications.
ISO 9926-3 Cranes — Training of drivers — Part 3: Tower cranes
Abstract: It covers the specific subjects considered necessary for training tower
crane operators.
ISO 9927-1 Cranes — Inspections — Part 1: General
Abstract: It specifies the general requirements for inspections to be carried out on
cranes as defined in ISO 4306-1.
ISO 9927-3 Cranes — Inspections — Part 3: Tower cranes
Abstract: It specifies the regular inspections to be carried out on tower cranes. It
does not cover inspection prior to the first use of a tower crane.
ISO 9928-1 Cranes — Crane operating manual — Part 1: General
Abstract: It specifies general requirements for the contents of a crane operating man-
ual.
ISO 9942-1 Cranes — Information labels — Part 1: General
Abstract: It specifies the minimum requirements for labels for the identification
(marking) and the operation of cranes.

ISO 9942-3 Cranes — Information labels — Part 3: Tower cranes
Abstract: It specifies the minimum requirements for labels for the identification
(marking) and the operation of tower cranes.
ISO 10245-1 Cranes — Limiting and indicating devices — Part 1: General
Abstract: It specifies general requirements for limiting and indicating devices for
cranes that are applicable to loads and motions, performance and environment.
These devices restrict operation and/ or provide the operator or other persons with
operational information.
ISO 10245-3 Cranes — Limiting and indicating devices — Part 3: Tower cranes
Abstract: It gives requirements specific to tower cranes for limiting and i
...