Abstract

This document specifies a method of determination of the sieve residue (gross particle and coagulum content) of polymer dispersions. This document is only applicable to coagulum type content.

Status
Published
Publication Date
12-Nov-2026
Current Stage
6060 - International Standard published
Start Date
13-Nov-2026
Completion Date
13-Nov-2026

Buy Documents

Standard

ISO 4576:2026 - Plastics — Polymer dispersions — Determination of sieve residue

Release Date:13-Nov-2026
English language (5 pages)
sale 15% off
Preview
sale 15% off
Preview

ISO 4576:2026 is an International Standard from ISO for determining the sieve residue of polymer dispersions. It specifies a filtration and weighing method for gross particle and coagulum content, and it is applicable only to coagulum type content.

What does ISO 4576:2026 specify?

ISO 4576:2026 specifies a method for measuring sieve residue in polymer dispersions. The document is organized into clauses covering scope, normative references, principle, reagents, apparatus, sampling, procedure, expression of results, precision and the test report.

In practice, that means the standard tells a laboratory how to prepare the sample, which sieve equipment to use, how to dry and weigh the residue, and what to record in the report. It is a test method document, not a product specification.

What are the key requirements of ISO 4576:2026?

ISO 4576:2026 sets out a controlled sieve test for residue left after a polymer dispersion is diluted, filtered, washed, dried and weighed. The details matter because the result depends on sample handling, sieve choice, drying temperature and how consistently the test is repeated.

Sampling and sample preparation

Sampling is carried out using ISO 123 or ISO 15528 to obtain a homogeneous sample. Visible skin and skin fragments larger than 5 mm are to be avoided, the sample is filtered before testing with a filter mesh of at least 0,4 mm, and the test is run within 10 min after sampling.

For a user, this means the sample has to be representative and fresh. Delays or poor handling can change the amount of coagulum measured.

Sieve, balance and drying conditions

The test uses metal gauze test sieves as specified in ISO 3310-1. The document names mesh apertures of 45 μm, 63 μm, 90 μm, 125 μm and 180 μm, with the actual choice depending on the sample specification. Non-metallic gauzes may be used, but that must be stated in the test report.

The apparatus also includes balances with different accuracies for the test portion and the sieve, and an oven or vacuum oven kept at the selected drying temperature. The preferred drying temperature is 105 °C ± 2 °C, with 125 °C or 140 °C as alternatives when suitable for the dispersion.

Test procedure

ISO 4576:2026 requires the gauze to be clean and dry before use. Metal gauze is cleaned, if needed, by boiling in water, rinsing with acetone and drying to constant mass; other suitable cleaning methods are allowed when boiling water is not effective.

The test portion is diluted with deionized water in a specified amount related to its mass, and a surfactant may be added if needed to prevent extra agglomeration during the test. The dilute dispersion is poured through the sieve, the residue is washed until a clear filtrate is obtained, then the sieve and residue are dried to constant mass and weighed.

Result calculation and repeatability

ISO 4576:2026 calculates sieve residue from the mass of the test portion and the mass increase of the sieve after drying. The result is expressed as a percentage by mass of the dispersion.

Two determinations are required for each test sieve used. The two results shall agree within ±5 % of the mean value; otherwise, two further determinations are carried out until the condition is met. The document also gives an estimated same-day repeatability of ±8 % when the test is performed by the same person with the same apparatus on the same laboratory sample.

Test reporting

The test report records the reference to ISO 4576:2026, identification of the polymer dispersion, the sieve and drying temperature used, the sieve residue, a description of the residue, any unusual features, deviations from the method and the test date.

Who uses ISO 4576:2026?

ISO 4576:2026 is used by laboratories that test polymer dispersions, by manufacturers and suppliers that monitor coagulum content, and by quality teams or buyers who need a defined method for comparing test results. It is relevant where the filtering behaviour and cleanliness of a dispersion need to be measured in a repeatable way.

What changed in ISO 4576:2026 from the previous edition?

ISO 4576:2026 is the third edition and cancels and replaces ISO 4576:1996. The document states these main changes:

  • updated normative references
  • added Clause 3 on terms and definitions, with subsequent clauses renumbered
  • added general laboratory instruments in the apparatus clause
  • added filtering requirements before testing
  • added a test time after sampling
  • added test sieve cleaning
  • updated the procedure

Which standards are used with ISO 4576:2026?

ISO 4576:2026 refers to these normative documents:

  • ISO 123 - provides a sampling method for rubber latex and is used here as one option for obtaining a homogeneous sample
  • ISO 3310-1 - specifies technical requirements and testing for metal wire cloth test sieves, which supports the sieve equipment used in the method
  • ISO 15528 - provides a sampling method for paints, varnishes and raw materials for paints and varnishes, and is used here as another sampling option

What does the ISO 4576:2026 document contain?

ISO 4576:2026 contains the full test method framework: principle, reagent list, apparatus requirements, sampling rules, step-by-step procedure, result expression, precision note and report content. It also includes an example filtration apparatus in Figure 1.

The apparatus clause gives practical details on sieve mesh sizes, supports for the gauze, balances, oven conditions, desiccators, beakers and general laboratory instruments. The procedure clause covers cleaning, drying to constant mass, dilution, filtration, washing, drying, reweighing and repeat determinations.

Clause 9 explains how to express the result, and Clause 11 lists the information that the test report shall include. This makes the standard useful both for running the test and for documenting it in a consistent way.

Relations

Effective Date
04-Nov-2023

Buy Documents

Standard

ISO 4576:2026 - Plastics — Polymer dispersions — Determination of sieve residue

Release Date:13-Nov-2026
English language (5 pages)
sale 15% off
Preview
sale 15% off
Preview

Get Certified

Connect with accredited certification bodies for this standard

DIN CERTCO

DIN Group product certification.

DAKKS Germany Verified

Smithers Quality Assessments

US management systems and product certification.

ANAB United States Verified

Sponsored listings

Frequently Asked Questions

ISO 4576:2026 is a standard published by the International Organization for Standardization (ISO). Its full title is "Plastics — Polymer dispersions — Determination of sieve residue". This standard covers: This document specifies a method of determination of the sieve residue (gross particle and coagulum content) of polymer dispersions. This document is only applicable to coagulum type content.

This document specifies a method of determination of the sieve residue (gross particle and coagulum content) of polymer dispersions. This document is only applicable to coagulum type content.

ISO 4576:2026 is classified under the following ICS (International Classification for Standards) categories: 83.080.01 - Plastics in general. The ICS classification helps identify the subject area and facilitates finding related standards.

ISO 4576:2026 has the following relationships with other standards: It is inter standard links to ISO 4576:1996. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

ISO 4576:2026 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.

Standards Content (Sample)


International
Standard
ISO 4576
Third edition
Plastics — Polymer dispersions —
2026-11
Determination of sieve residue
Plastiques — Dispersions de polymères — Détermination du
résidu par tamisage
Reference number
© ISO 2026
All rights reserved.
This ISO publication is protected by copyright and is owned by ISO and/or its licensors.
The content of this ISO publication is provided under licence, not sold. Use is subject to the applicable licence terms issued by ISO,
an ISO member body, or an authorized third-party distributor.
Except as required for implementation or expressly permitted by a separate licence, no part of this ISO publication may be
reproduced, distributed, modified, used, or made available in any form or by any means – electronic or mechanical, including
photocopying, scanning, recording, or posting on internal or external digital platforms.
Any use beyond the scope of the granted rights is prohibited and may result in legal action.
ISO copyright office
CP 401 • CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 1
5 Reagents . 1
6 Apparatus . 2
7 Sampling . 3
8 Procedure . 4
9 Expression of results . 4
10 Precision . 5
11 Test report . 5

iii
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types
of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent
rights in respect thereof. As of the date of publication of this document, ISO had not received notice of (a)
patent(s) which may be required to implement this document. However, implementers are cautioned that
this may not represent the latest information, which may be obtained from the patent database available at
www.iso.org/patents. ISO shall not be held responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions
related to conformity assessment, as well as information about ISO's adherence to the World Trade
Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 61, Plastics, Subcommittee SC 9, Thermoplastic
materials.
This third edition cancels and replaces the second edition (ISO 4576:1996), which has been technically
revised.
The main changes are as follows:
— the normative references has been updated (see Clause 2);
— the mandatory terms and definitions clause (see Clause 3) has been added, and subsequent clauses have
been renumbered;
— "general laboratory instruments" has been added in the apparatus clause (see Clause 6);
— filtering requirements before test has been added;
— a test time after sampling has been added;
— test sieve cleaning has been added;
— the procedure has been updated.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.

iv
International Standard ISO 4576:2026(en)
Plastics — Polymer dispersions — Determination of sieve
residue
1 Scope
This document specifies a method of determination of the sieve residue (gross particle and coagulum
content) of polymer dispersions.
This document is only applicable to coagulum type content.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitut
...