Abstract

This document specifies a method for the determination of the biometric characteristics of husked or milled rice kernels.

Status
Not Published
Current Stage
5020 - FDIS ballot initiated: 2 months. Proof sent to secretariat
Start Date
02-Nov-2026
Completion Date
02-Nov-2026

Buy Documents

Draft

ISO/FDIS 11746-1 - Rice — Determination of biometric characteristics of kernels — Part 1: Manual method

Release Date:19-Oct-2026
English language (8 pages)
sale 15% off
sale 15% off
Draft

REDLINE ISO/FDIS 11746-1 - Rice — Determination of biometric characteristics of kernels — Part 1: Manual method

Release Date:19-Oct-2026
English language (8 pages)
sale 15% off
sale 15% off
Draft

ISO/FDIS 11746-1 - Riz — Détermination des caractéristiques biométriques des grains — Partie 1: Méthode manuelle

Release Date:31-Oct-2026
French language (10 pages)
sale 15% off
sale 15% off

ISO/FDIS 11746-1 is an ISO draft International Standard for the manual determination of biometric characteristics of husked or milled rice kernels. It specifies how to prepare a sample, measure kernel length, width and thickness with a micrometer, and calculate the length/width ratio for users who need comparable rice measurements.

What does ISO/FDIS 11746-1 specify?

ISO/FDIS 11746-1 specifies a manual method for determining the biometric characteristics of husked or milled rice kernels. The method is intended for laboratory measurement of kernel dimensions, with sample preparation, calculation, precision, and reporting covered in separate clauses.

Sampling is not part of the method itself. The document points users to ISO 24333 as the recommended sampling method and stresses that the laboratory should receive a representative sample that has not been damaged or altered in transport or storage.

The document is organized into clauses on scope, normative references, terms and definitions, principle, apparatus, sampling, procedure, calculation and expression of results, precision, and test report.

AnnexWhat it covers
Annex AKernel measurements and the orientation used for length, width, and thickness
Annex BInterlaboratory test results and precision data

What are the key requirements of ISO/FDIS 11746-1?

ISO/FDIS 11746-1 requires manual selection of kernels and measurement of their biometric characteristics with a micrometer. In practice, this means the operator must handle kernels carefully and avoid deformation, especially for husked rice, because measurement accuracy depends on keeping the grain in its natural shape.

Sample preparation and selection

Clause 7.1 requires the aggregate sample to be mixed and reduced with a sample divider, repeating the first division step at least three times, until a test sample of about 50 g is obtained. The operator then spreads the sample on a contrasting tray and removes extraneous matter, immature or malformed kernels, and broken kernels. This matters because the measurements are meant to represent sound kernels only.

Measurement procedure

Clause 7.2 requires two random sets of 100 kernels to be drawn from the prepared test sample. Each kernel is measured while held motionless in the correct orientation, using the micrometer, and results are reported to the nearest 0.01 mm. This gives a repeatable manual workflow that reduces handling errors and makes results comparable between operators.

Check on random selection

Clause 7.2.3 requires the mean values for the two 100-kernel sets to be compared for each characteristic - length, width, and thickness. If the calculated difference exceeds the stated limit, the sets are treated as not randomly selected and the full procedure is repeated. In practice, this is a control step that helps detect biased kernel selection before the final result is accepted.

Calculation and expression of results

Clause 8 requires arithmetic means to be calculated for the two determinations and used for length, width, and thickness. It also requires the length/width ratio to be calculated from the average length and average width, then reported together with the mean dimensions to the nearest 0.01 mm. This gives users a compact description of kernel size and shape.

Precision and reporting

Clause 9 summarizes precision from an interlaboratory test and gives repeatability and reproducibility limits for length, width, and thickness. Clause 10 requires the test report to identify the sample, state the sampling method if known, cite ISO 11746-1, record any optional details or incidents that could affect the result, give the test results, and include the date of the test. This is the information needed for traceable quality records and dispute-free reporting.

What terms does ISO/FDIS 11746-1 define?

  • Biometric characteristics - the kernel's length, width, and thickness measured along the three Cartesian axes.
  • Husked rice - a rice form used by the document as a target material for measurement.
  • Milled rice - a rice form used by the document as a target material for measurement.
  • Test sample - the reduced and cleaned sample prepared for measurement in Clause 7.
  • Repeatability - the closeness of results under the same laboratory, operator, equipment, and short time interval.
  • Reproducibility - the closeness of results obtained in different laboratories with different operators and equipment.
  • Length/width ratio - the ratio calculated from the average length and average width of the kernels.

Who uses ISO/FDIS 11746-1?

ISO/FDIS 11746-1 is used by laboratories that test rice quality and by technical staff who need measured kernel dimensions for specification checks, product comparison, or grading-related work. It is also relevant to rice processors, quality managers, and buyers who need a common manual method for comparing husked or milled rice samples.

What changed in ISO/FDIS 11746-1 from the previous edition?

ISO/FDIS 11746-1 is the first edition and cancels and replaces ISO 11746:2020. The stated changes are numeration changes and a title change to align with the new ISO 11746-2.

Which standards are used with ISO/FDIS 11746-1?

  • ISO 5725-1 - provides the general principles and definitions for accuracy, trueness, and precision.
  • ISO 7301 - supplies the rice specification used with the terminology and scope of the method.
  • ISO 24333 - gives the sampling method referred to in Clause 6.
  • ISO 5725-2 - is used for the interlaboratory test described in Annex B.

What does the ISO/FDIS 11746-1 document contain?

ISO/FDIS 11746-1 contains a defined manual procedure, a micrometer-based measurement method, and calculation steps for mean length, width, thickness, and length/width ratio. It also includes a kernel-orientation figure in Annex A and precision tables in Annex B, which support laboratory checking and method comparison.

The document further provides a test-report checklist and precision limits for repeatability and reproducibility. Those parts are used for routine testing, interlaboratory comparison, and documenting results in a way that can be reviewed later.

Relations

Effective Date
22-Aug-2026

Buy Documents

Draft

ISO/FDIS 11746-1 - Rice — Determination of biometric characteristics of kernels — Part 1: Manual method

Release Date:19-Oct-2026
English language (8 pages)
sale 15% off
sale 15% off
Draft

REDLINE ISO/FDIS 11746-1 - Rice — Determination of biometric characteristics of kernels — Part 1: Manual method

Release Date:19-Oct-2026
English language (8 pages)
sale 15% off
sale 15% off
Draft

ISO/FDIS 11746-1 - Riz — Détermination des caractéristiques biométriques des grains — Partie 1: Méthode manuelle

Release Date:31-Oct-2026
French language (10 pages)
sale 15% off
sale 15% off

Get Certified

Connect with accredited certification bodies for this standard

BSI Group

BSI (British Standards Institution) is the business standards company that helps organizations make excellence a habit.

UKAS United Kingdom Verified

Bureau Veritas

Bureau Veritas is a world leader in laboratory testing, inspection and certification services.

COFRAC France Verified

DNV

DNV is an independent assurance and risk management provider.

NA Norway Verified

Sponsored listings

Frequently Asked Questions

ISO/FDIS 11746-1 is a draft published by the International Organization for Standardization (ISO). Its full title is "Rice — Determination of biometric characteristics of kernels — Part 1: Manual method". This standard covers: This document specifies a method for the determination of the biometric characteristics of husked or milled rice kernels.

This document specifies a method for the determination of the biometric characteristics of husked or milled rice kernels.

ISO/FDIS 11746-1 is classified under the following ICS (International Classification for Standards) categories: 67.060 - Cereals, pulses and derived products. The ICS classification helps identify the subject area and facilitates finding related standards.

ISO/FDIS 11746-1 has the following relationships with other standards: It is inter standard links to ISO 11746:2020. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

ISO/FDIS 11746-1 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.

Standards Content (Sample)


FINAL DRAFT
International
Standard
ISO/TC 34/SC 4
Rice — Determination of biometric
Secretariat: SAC
characteristics of kernels —
Voting begins on:
2026-11-02
Part 1:
Manual method
Voting terminates on:
2026-12-14
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT,
WITH THEIR COMMENTS, NOTIFICATION OF ANY
RELEVANT PATENT RIGHTS OF WHICH THEY ARE AWARE
AND TO PROVIDE SUPPOR TING DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
ISO/CEN PARALLEL PROCESSING LOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE
TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL
TO BECOME STAN DARDS TO WHICH REFERENCE MAY BE
MADE IN NATIONAL REGULATIONS.
Reference number
FINAL DRAFT
International
Standard
ISO/TC 34/SC 4
Rice — Determination of biometric
Secretariat: SAC
characteristics of kernels —
Voting begins on:
Part 1:
Manual method
Voting terminates on:
© ISO 2026
All rights reserved.
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT,
WITH THEIR COMMENTS, NOTIFICATION OF ANY
This ISO publication is protected by copyright and is owned by ISO and/or its licensors.
RELEVANT PATENT RIGHTS OF WHICH THEY ARE AWARE
The content of this ISO publication is provided under licence, not sold. Use is subject to the applicable licence terms issued by ISO,
AND TO PROVIDE SUPPOR TING DOCUMENTATION.
an ISO member body, or an authorized third-party distributor.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
Except as required for implementation or expressly permitted by a separate licence, no part of this ISO publication may be
ISO/CEN PARALLEL PROCESSING
LOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
reproduced, distributed, modified, used, or made available in any form or by any means – electronic or mechanical, including
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE
photocopying, scanning, recording, or posting on internal or external digital platforms. TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL
TO BECOME STAN DARDS TO WHICH REFERENCE MAY BE
Any use beyond the scope of the granted rights is prohibited and may result in legal action.
MADE IN NATIONAL REGULATIONS.
ISO copyright office
CP 401 • CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
Reference number
ii
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 1
5 Apparatus . 1
6 Sampling . 2
7 Procedure . 2
7.1 Preparation of the test sample .2
7.2 Determination .2
8 Calculation and expression of results . 3
8.1 Calculation .3
8.2 Determination of length/width ratio .3
8.3 Expression of results .3
9 Precision . 3
9.1 Interlaboratory test . .3
9.2 Repeatability .3
9.3 Reproducibility .3
10 Test report . 4
Annex A (informative) Kernel measurements . 5
Annex B (informative) Results of the interlaboratory test . 6
Bibliography . 8

iii
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types
of ISO document should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent
rights in respect thereof. As of the date of publication of this document, ISO had not received notice of (a)
patent(s) which may be required to implement this document. However, implementers are cautioned that
this may not represent the latest information, which may be obtained from the patent database available at
www.iso.org/patents. ISO shall not be held responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions
related to conformity assessment, as well as information about ISO’s adherence to the World Trade
Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 34, Food products, Subcommittee SC 4, Cereals
and pulses, in collaboration with the European Committee for Standardization (CEN) Technical Committee
CEN/TC 338, Cereal and cereal products, in accordance with the Agreement on technical cooperation between
ISO and CEN (Vienna Agreement).
This first edition cancels and replaces ISO 11746:2020, of which it constitutes a minor revision.
The changes are as follows:
— numeration and change in the title to align with the new ISO 11746-2.
A list of all parts in the ISO 11746 series can be found on the ISO website.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.

© IS
...


ISO/TC 34/SC 4
Date: 2026-09
ISO 11746-1:202*(E)
ISO TC 34/SC 4
Secretariat: SAC
Date: 2026-10-16
Rice — Determination of biometric characteristics of kernels —
Part 1:manualManual method
FDIS stage
TTTThhhhiiiissss d d d drrrraftaftaftaft i i i issss s s s suuuubbbbmmmmiiiittttttttedededed t t t toooo  a pa pa pa pararararallel vallel vallel vallel vooootttte e e e iiiinnnn I I I ISSSSOOOO,,,, C C C CEEEENNNN.

All rights reserved.
This ISO publication is protected by copyright and is owned by ISO and/or its licensors.
The content of this ISO publication is provided under licence, not sold. Use is subject to the applicable licence terms issued
by ISO, an ISO member body, or an authorized third-party distributor.
Except as required for implementation or expressly permitted by a separate licence, no part of this ISO publication may
be reproduced, distributed, modified, used, or made available in any form or by any means – electronic or mechanical,
including photocopying, scanning, recording, or posting on internal or external digital platforms.
Any use beyond the scope of the granted rights is prohibited and may result in legal action.
ISO copyright office
CP 401 • CH-1214 Vernier, Geneva
Phone: + 41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
Contents
Foreword . iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 1
5 Apparatus . 1
6 Sampling . 2
7 Procedure . 2
7.1 Preparation of the test sample . 2
7.2 Determination . 2
8 Calculation and expression of results . 2
8.1 Calculation . 2
8.2 Determination of length/width ratio . 2
8.3 Expression of results . 3
9 Precision . 3
9.1 Interlaboratory test . 3
9.2 Repeatability . 3
9.3 Reproducibility . 3
10 Test report . 3
Annex A (informative) Kernel measurements . 5
Annex B (informative) Results of the interlaboratory test . 6
Bibliography . 8

iii
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types of
ISO documentsdocument should be noted. This document was drafted in accordance with the editorial rules
of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document may involvesinvolve the use
of (a) patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent
rights in respect thereof. As of the date of publication of this document, ISO had not received notice of (a)
patent(s) which may be required to implement this document. However, implementers are cautioned that this
may not represent the latest information, which may be obtained from the patent database available at
www.iso.org/patents. ISO shall not be held responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions
related to conformity assessment, as well as information about ISO’s adherence to the World Trade
Organization (WTO) principles in the Technical Barriers to Trade (TBT)), see
www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 34, Food products, Subcommittee SC 4, Cereals
and pulses, in collaboration with the European Committee for Standardization (CEN) Technical Committee
CEN/TC 338, Cereal and cereal products, in accordance with the Agreement on technical cooperation between
ISO and CEN (Vienna Agreement).
This first edition cancels and replaces ISO 11746:2020, of which it constitutes a minor revision. The changes
are as follows:
The changes are as follows:
— numeration and change in the title to align with the new ISO 11746-2.
A list of all parts in the ISO 11746 series can be found on the ISO website.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.
iv
Rice — Determination of biometric characteristics of kernels —
Part 1: manualManual method
1 Scope
This document specifies a method for the determination of the biometric characteristics of husked or milled
rice kernels.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes
requirements of this document. For dated references, only the edition cited applies. For undated references,
the latest edition of the referenced document (including any amendments) applies.
ISO 5725-1, Accuracy (trueness and precision) of measurement methods and results — Part 1: General principles
and definitions
ISO 7301, Rice — Specification
ISO 24333, Cereals and cereal products — Sampling
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 5725-1, ISO 7301, ISO 24333 and
the following apply.
ISO and IEC maintain terminologicalterminology databases for use in standardization at the following
addresses:
— ISO Online browsing platform: available at h
...


PROJET FINAL
Norme
internationale
ISO/TC 34/SC 4
Riz — Détermination des
Secrétariat: SAC
caractéristiques biométriques des
Début de vote:
grains —
2026-11-02
Partie 1:
Vote clos le:
2026-12-14
Méthode manuelle
Rice — Determination of biometric characteristics of kernels —
Part 1: Manual method
LES DESTINATAIRES DU PRÉSENT PROJET SONT
INVITÉS À PRÉSENTER, AVEC LEURS OBSERVATIONS,
NOTIFICATION DES DROITS DE PROPRIÉTÉ DONT ILS
AURAIENT ÉVENTUELLEMENT CONNAISSANCE ET À
FOURNIR UNE DOCUMENTATION EXPLICATIVE.
OUTRE LE FAIT D’ÊTRE EXAMINÉS POUR
ÉTABLIR S’ILS SONT ACCEPTABLES À DES FINS
INDUSTRIELLES, TECHNOLOGIQUES ET COM-MERCIALES,
AINSI QUE DU POINT DE VUE DES UTILISATEURS, LES
PROJETS DE NORMES
TRAITEMENT PARALLÈLE ISO/CEN
INTERNATIONALES DOIVENT PARFOIS ÊTRE CONSIDÉRÉS
DU POINT DE VUE DE LEUR POSSI BILITÉ DE DEVENIR DES
NORMES POUVANT
SERVIR DE RÉFÉRENCE DANS LA RÉGLEMENTATION
NATIONALE.
Numéro de référence
PROJET FINAL
Norme
internationale
ISO/TC 34/SC 4
Riz — Détermination des
Secrétariat: SAC
caractéristiques biométriques des
Début de vote:
grains —
2026-11-02
Partie 1:
Vote clos le:
2026-12-14
Méthode manuelle
Rice — Determination of biometric characteristics of kernels —
Part 1: Manual method
DOCUMENT PROTÉGÉ PAR COPYRIGHT
© ISO 2026
LES DESTINATAIRES DU PRÉSENT PROJET SONT
Tous droits réservés.
INVITÉS À PRÉSENTER, AVEC LEURS OBSERVATIONS,
NOTIFICATION DES DROITS DE PROPRIÉTÉ DONT ILS
La présente publication de l’ISO est protégée par le droit d’auteur et demeure la propriété de l’ISO et/ou de ses concédants de
AURAIENT ÉVENTUELLEMENT CONNAISSANCE ET À
licence.
FOURNIR UNE DOCUMENTATION EXPLICATIVE.
Le contenu de la présente publication de l’ISO est fourni sous licence, et n’est pas vendu. Son utilisation est soumise aux conditions
OUTRE LE FAIT D’ÊTRE EXAMINÉS POUR
ÉTABLIR S’ILS SONT ACCEPTABLES À DES FINS
de licence applicables définies par l’ISO, un organisme membre de l’ISO, ou un distributeur tiers agréé.
INDUSTRIELLES, TECHNOLOGIQUES ET COM-MERCIALES,
Sous réserve des besoins liés à sa mise en œuvre ou d’une autorisation expresse prévue aux termes d’une licence distincte, aucune
AINSI QUE DU POINT DE VUE DES UTILISATEURS, LES
partie de la présente publication de l’ISO ne peut être reproduite, distribuée, modifiée, utilisée ou mise à disposition sous quelque PROJETS DE NORMES
TRAITEMENT PARALLÈLE ISO/CEN
INTERNATIONALES DOIVENT PARFOIS ÊTRE CONSIDÉRÉS
forme ou par quelque moyen que ce soit – électronique ou mécanique, y compris la photocopie, la numérisation, l’enregistrement
DU POINT DE VUE DE LEUR POSSI BILITÉ DE DEVENIR DES
ou la publication sur des plateformes numériques internes ou externes.
NORMES POUVANT
SERVIR DE RÉFÉRENCE DANS LA RÉGLEMENTATION
Toute utilisation hors du champ d’application des droits accordés est interdite et peut donner lieu à des poursuites judiciaires.
NATIONALE.
ISO copyright office
Case postale 401 • CH-1214 Vernier, Genève
Tél.: +41 22 749 01 11
E-mail: copyright@iso.org
Web: www.iso.org
Publié en Suisse
Numéro de référence
ii
Sommaire Page
Avant-propos .iv
1 Domaine d'application . 1
2 Références normatives . 1
3 Termes et définitions . 1
4 Principe. 1
5 Appareillage . 1
6 Échantillonnage . 2
7 Mode opératoire . 2
7.1 Préparation de l'échantillon pour essai .2
7.2 Détermination .2
8 Calcul et expression des résultats . 3
8.1 Calcul .3
8.2 Détermination du rapport longueur/largeur .3
8.3 Expression des résultats .3
9 Fidélité . 3
9.1 Essai interlaboratoires .3
9.2 Répétabilité .3
9.3 Reproductibilité .4
10 Rapport d'essai . 4
Annexe A (informative) Mesurages des grains . 5
Annexe B (informative) Résultats de l'essai interlaboratoires . 6
Bibliographie . 8

iii
Avant-propos
L'ISO (Organisation internationale de normalisation) est une fédération mondiale d'organismes nationaux
de normalisation (comités membres de l'ISO). L'élaboration des Normes internationales est en général
confiée aux comités techniques de l'ISO. Chaque comité membre intéressé par une étude a le droit de faire
partie du comité technique créé à cet effet. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec l'ISO participent également aux travaux. L'ISO collabore étroitement avec
la Commission électrotechnique internationale (IEC) en ce qui concerne la normalisation électrotechnique.
Les procédures utilisées pour élaborer le présent document et celles destinées à sa mise à jour sont
décrites dans les Directives ISO/IEC, Partie 1. Il convient, en particulier, de prendre note des différents
critères d'approbation requis pour les différents types de documents ISO. Le présent document
a été rédigé conformément aux règles de rédaction données dans les Directives ISO/IEC, Partie 2
(voir www.iso.org/directives).
L'ISO attire l'attention sur le fait que la mise en application du présent document peut entraîner l'utilisation
d'un ou de plusieurs brevets. L'ISO ne prend pas position quant à la preuve, à la validité et à l'applicabilité de
tout droit de brevet revendiqué à cet égard. À la date de publication du présent document, l'ISO n'avait pas
reçu notification qu'un ou plusieurs brevets pouvaient être nécessaires à sa mise en application. Toutefois,
il y a lieu d'avertir les responsables de la mise en application du présent document que des informations
plus récentes sont susceptibles de figurer dans la base de données de brevets, disponible à l'adresse
www.iso.org/brevets. L'ISO ne saurait être tenue pour responsable de ne pas avoir identifié tout ou partie de
tels droits de brevet.
Les appellations commerciales éventuellement mentionnées dans le présent document sont données pour
information, par souci de commodité, à l'intention des utilisateurs et ne sauraient constituer un engagement.
Pour une explication de la nature volontaire des normes, la signification des termes et expressions
spécifiques de l'ISO liés à l'évaluation de la conformité, ou pour toute information au sujet de l'adhésion de
l'ISO aux principes de l'Organisation mondiale du commerce (OMC) concernant les obstacles techniques au
commerce (OTC), voir le lien suivant: www.iso.org/avant-propos.
Le présent document a été élaboré par le comité technique ISO/TC 34, Produits alimentaires, sous-comité SC 4,
Céréales et légumineuses, en collaboration avec le comité technique CEN/TC 338, Céréales et produits céréaliers
du Comité européen de normalisation (CEN), conformément à l'Accord de coopération technique entre l'ISO
et le CEN (Accord de Vienne).
Cette première édition annule et remplace l'ISO 11746:2020, dont elle constitue une révision mineure.
Les modifications sont les suivantes:
— numérotation et modification du titre pour l'aligner sur la nouvelle ISO 11746-2.
Une liste de toutes les parties de la série ISO 11746 peut être consultée sur le site de l'ISO.
Il convient que l'utilisateur adresse tout retour d'information ou toute question concernant le présent
document à l'organisme national de normalisation de son pays. Une liste exhaustive desdits organismes se
trouve à l'adresse www.iso.org/members.html.

iv
PROJET FINAL Norme internationale ISO/FDIS 11746-1:2026(fr)
Riz — Détermination des caractéristiques biométriques des
grains —
Partie 1:
Méthode manuelle
1 Domaine d'application
Le présent document spécifie une méthode de détermination des caractéristiques biométriques des grains
de riz décortiqués ou usinés.
2 Références normatives
Les documents suivants sont cités dans le texte de sorte qu'ils constituent, pour tout ou partie de leur
conte
...