ISO 16588:2002/Amd 1:2004
(Amendment)Water quality — Determination of six complexing agents — Gas-chromatographic method — Amendment 1
Water quality — Determination of six complexing agents — Gas-chromatographic method — Amendment 1
Qualité de l'eau — Dosage de six agents complexants — Méthode par chromatographie en phase gazeuse — Amendement 1
General Information
- Status
- Published
- Publication Date
- 02-May-2004
- Technical Committee
- ISO/TC 147/SC 2 - Physical, chemical and biochemical methods
- Drafting Committee
- ISO/TC 147/SC 2 - Physical, chemical and biochemical methods
- Current Stage
- 6060 - International Standard published
- Start Date
- 03-May-2004
- Due Date
- 30-Sep-2006
- Completion Date
- 30-Sep-2006
Relations
- Amends
ISO 16588:2002 - Water quality — Determination of six complexing agents — Gas-chromatographic method - Effective Date
- 06-Jun-2022
- Child
ISO 16588:2002 - Water quality — Determination of six complexing agents — Gas-chromatographic method - Effective Date
- 15-Apr-2008
Overview
ISO 16588:2002/Amd 1:2004 is an amendment to the international standard ISO 16588:2002, which specifies a gas-chromatographic method for the determination of six complexing agents in water. This amendment was prepared by Technical Committee ISO/TC 147, Subcommittee SC 2, focusing on water quality analysis using physical, chemical, and biochemical methods. The primary aim of this updated document is to further improve precision by including results of an interlaboratory trial and clarifying the reproducibility and repeatability of the method.
Key Topics
- Water Quality Assessment: Expands on established methodologies for the detection of six key complexing agents, including EDTA, NTA, DTPA, MGDA, β-ADA, and 1,3-PDTA.
- Gas Chromatography: Details analytical methods using gas chromatography for quantifying complexing agents at trace levels, a critical technique for environmental and regulatory monitoring.
- Improved Precision: Amendment 1 incorporates findings from an interlaboratory trial conducted in Germany, providing additional data for precision, repeatability, and reproducibility.
- Interlaboratory Studies: Offers insight into method performance across a variety of water matrices including drinking water, surface waters, and effluent samples.
Applications
The ISO 16588:2002/Amd 1:2004 standard is widely used in:
- Environmental Monitoring: Enables environmental laboratories and agencies to accurately determine the presence and concentration of complexing agents in natural and treated waters, supporting regulatory compliance and ecological assessments.
- Drinking Water Testing: Ensures that water suppliers and public health authorities can monitor potential contaminants with reliability and consistency.
- Industrial Wastewater Analysis: Assists in evaluating the treatment efficiency and environmental impact of effluent releases from industrial processes that utilize or discharge chelating agents.
- Quality Control and Accreditation: Provides a recognized, harmonized procedure for laboratories seeking ISO accreditation in water quality testing.
Organizations benefit from adopting ISO 16588:2002/Amd 1:2004 by:
- Achieving standardized and reproducible results for complexing agent determination.
- Meeting regulatory requirements for environmental reporting and compliance.
- Enhancing the credibility of laboratory results for clients and regulators.
Related Standards
Laboratories and professionals involved in water quality assessment may also refer to:
- ISO 5667 - Guidance on sampling procedures for water quality.
- ISO 17294 - Determination of metals and semimetals by ICP-MS.
- ISO 11885 - Determination of trace elements using ICP-OES.
- ISO 8466 - Calibration and evaluation of analytical methods for water analysis.
These related ISO standards support comprehensive water quality monitoring and help laboratories maintain international best practices in analytical methodology.
ISO 16588:2002/Amd 1:2004 furthers the reliability and precision in the measurement of complexing agents in water by gas chromatography, underpinning essential environmental, public health, and industrial applications. Adopting this amendment ensures high standards for reproducibility and traceability in water quality testing worldwide.
Buy Documents
ISO 16588:2002/Amd 1:2004 - Water quality — Determination of six complexing agents — Gas-chromatographic method — Amendment 1 Released:5/3/2004
ISO 16588:2002/Amd 1:2004 - Qualité de l'eau — Dosage de six agents complexants — Méthode par chromatographie en phase gazeuse — Amendement 1 Released:11/7/2005
Get Certified
Connect with accredited certification bodies for this standard
CIS Institut d.o.o.
Personal Protective Equipment (PPE) certification body. Notified Body NB-2890 for EU Regulation 2016/425 PPE.
Kiwa BDA Testing
Building and construction product certification.
Kmetijski inštitut Slovenije
Agricultural Institute of Slovenia. Soil testing, plant health, agricultural product analysis.
Sponsored listings
Frequently Asked Questions
ISO 16588:2002/Amd 1:2004 is a standard published by the International Organization for Standardization (ISO). Its full title is "Water quality — Determination of six complexing agents — Gas-chromatographic method — Amendment 1". This standard covers: Water quality — Determination of six complexing agents — Gas-chromatographic method — Amendment 1
Water quality — Determination of six complexing agents — Gas-chromatographic method — Amendment 1
ISO 16588:2002/Amd 1:2004 is classified under the following ICS (International Classification for Standards) categories: 13.060.50 - Examination of water for chemical substances. The ICS classification helps identify the subject area and facilitates finding related standards.
ISO 16588:2002/Amd 1:2004 has the following relationships with other standards: It is inter standard links to ISO 16588:2002; is excused to ISO 16588:2002. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
ISO 16588:2002/Amd 1:2004 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
INTERNATIONAL ISO
STANDARD 16588
First edition
2002-11-01
AMENDMENT 1
2004-05-01
Water quality — Determination of six
complexing agents —
Gas-chromatographic method
AMENDMENT 1
Qualité de l'eau — Dosage de six agents complexants — Méthode par
chromatographie en phase gazeuse
AMENDEMENT 1
Reference number
ISO 16588:2002/Amd.1:2004(E)
©
ISO 2004
ISO 16588:2002/Amd.1:2004(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2004
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2004 – All rights reserved
ISO 16588:2002/Amd.1:2004(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document
...
NORME ISO
INTERNATIONALE 16588
Première édition
2002-11-01
AMENDEMENT 1
2004-05-01
Qualité de l'eau — Dosage de six agents
complexants — Méthode par
chromatographie en phase gazeuse
AMENDEMENT 1
Water quality — Determination of six complexing agents —
Gas-chromatographic method
AMENDMENT 1
Numéro de référence
ISO 16588:2002/Amd.1:2004(F)
©
ISO 2004
ISO 16588:2002/Amd.1:2004(F)
PDF – Exonération de responsabilité
Le présent fichier PDF peut contenir des polices de caractères intégrées. Conformément aux conditions de licence d'Adobe, ce fichier
peut être imprimé ou visualisé, mais ne doit pas être modifié à moins que l'ordinateur employé à cet effet ne bénéficie d'une licence
autorisant l'utilisation de ces polices et que celles-ci y soient installées. Lors du téléchargement de ce fichier, les parties concernées
acceptent de fait la responsabilité de ne pas enfreindre les conditions de licence d'Adobe. Le Secrétariat central de l'ISO décline toute
responsabilité en la matière.
Adobe est une marque déposée d'Adobe Systems Incorporated.
Les détails relatifs aux produits logiciels utilisés pour la création du présent fichier PDF sont disponibles dans la rubrique General Info
du fichier; les paramètres de création PDF ont été optimisés pour l'impression. Toutes les mesures ont été prises pour garantir
l'exploitation de ce fichier par les comités membres de l'ISO. Dans le cas peu probable où surviendrait un problème d'utilisation,
veuillez en informer le Secrétariat central à l'adresse donnée ci-dessous.
© ISO 2004
Droits de reproduction réservés. Sauf prescription différente, aucune partie de cette publication ne peut être reproduite ni utilisée sous
quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les microfilms, sans l'accord écrit
de l'ISO à l'adresse ci-après ou du comité membre de l'ISO dans le pays du demandeur.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax. + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Version française parue en 2005
Publié en Suisse
ii © ISO 2004 – Tous droits réservés
ISO 16588:2002/Amd.1:2004(F)
Avant-propos
L'ISO (Organisation internationale de normalisation) est une fédération mondiale d'organismes nationaux de
normalisation (comités membres de l'ISO). L'élaboration des Normes internationales est en général confiée
aux comités techniques de l'ISO. Chaque comité membre intéressé par une étude a le droit de faire partie du
comité technique créé à cet effet. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec l'ISO participent également aux travaux. L'ISO collabore étroitement avec
la Commission électrotechnique internationale (CEI) en ce qui concerne la normalisation électrotechnique.
Les Normes internationales sont rédigées conformément aux règles données dans les Directives ISO/CEI,
Partie 2.
La tâche principale des comités techniques est d'élaborer les Normes internationales. Les projets de Normes
internationales adoptés par les comités techniques sont soumis aux comités membres pour vote. Leur
publication comme Normes internationales requiert l'approbation de 75 % au moins des comités membres
votants.
L'attention est appelée sur le fait que cert
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...