ISO 8367-2:1993
(Main)Packaging — Dimensional tolerances for general purpose sacks — Part 2: Sacks made from thermoplastic flexible film
Packaging — Dimensional tolerances for general purpose sacks — Part 2: Sacks made from thermoplastic flexible film
The tolerances of the following dimensions of sacks made from thermoplastic flexible film as defined in ISO 6590-2 are specified: thickness of plies, length of sack, width of sack, width of gusset, circumference of sack with gussets, width of bottom, width of valve, position of the leading edge of the valve sleeve, length of the valve sleeve, print position on sack.
Emballages — Tolérances dimensionnelles des sacs d'usage général — Partie 2: Sacs faits d'un film thermoplastique flexible
La présente partie de l'ISO 8367 prescrit un ensemble de tolérances applicables à la fabrication de sacs faits d'un film thermoplastique flexible, tels que définis dans l'ISO 6590-2.
General Information
- Status
- Published
- Publication Date
- 22-Dec-1993
- Technical Committee
- ISO/TC 122 - Packaging
- Drafting Committee
- ISO/TC 122 - Packaging
- Current Stage
- 9060 - Close of review
- Completion Date
- 02-Dec-2030
Overview
ISO 8367-2:1993 specifies the dimensional tolerances for general purpose sacks made from thermoplastic flexible film. Developed by the International Organization for Standardization (ISO), this standard provides manufacturers, quality inspectors, and packaging professionals with a reliable framework for ensuring consistency and quality in sack production. The standard covers essential dimensions, describes measurement methods, and promotes compatibility in the global packaging industry.
Key Topics
ISO 8367-2:1993 defines the allowable variations (tolerances) for the main dimensions of thermoplastic flexible film sacks. Key parameters include:
- Thickness of plies: Ensuring uniform film thickness for durability and protection.
- Length and width of sack: Standardizing overall size for storage and transport efficiency.
- Width of gusset: Controlling side expansion for volume and stability.
- Circumference of sack with gussets: Standardizing fit and compatibility.
- Width of bottom: Ensuring base stability.
- Width and position of valve: Important for filling, sealing, and emptying processes.
- Leading edge and length of valve sleeve: Facilitating efficient product filling and minimizing spillage.
- Print position on sack: Ensuring branding and labeling are correctly placed and legible.
All measurements and tolerances are defined to promote interoperability and minimize errors during manufacturing and use.
Applications
ISO 8367-2:1993 is essential for professionals involved in the design, manufacture, and quality control of packaging using thermoplastic flexible film sacks. Practical applications include:
- Manufacturing control: Ensures that sacks meet specified tolerances, resulting in fewer defects and more consistent production.
- Quality assurance: Provides a benchmark for inspection processes, reducing disputes over dimensional conformity.
- Supply chain optimization: Harmonized sack dimensions simplify logistics, stacking, and transportation, contributing to cost savings.
- Regulatory compliance: Assists companies in demonstrating adherence to international packaging quality standards.
- Customer trust: Consistent packaging dimensions enhance consumer and business partner confidence in the product.
Industries such as food processing, agriculture, chemicals, construction, and retail can benefit substantially from implementing this standard.
Related Standards
Several ISO standards are referenced within ISO 8367-2:1993, supporting accurate measurement and quality practices:
- ISO 6590-2:1986: Packaging - Sacks - Vocabulary and types (specific to thermoplastic flexible film).
- ISO 6591-2:1985: Packaging - Sacks - Description and method of measurement - Part 2: Empty sacks made from thermoplastic flexible film.
- ISO 7023:1983: Packaging - Sacks - Method of sampling empty sacks for testing.
- ISO 4593:1993: Plastics - Film and sheeting - Determination of thickness by mechanical scanning.
Using ISO 8367-2:1993 in combination with these standards ensures a comprehensive approach to packaging quality, measurement accuracy, and industry best practices.
By implementing ISO 8367-2:1993 for thermoplastic flexible film sacks, organizations in the packaging sector can confidently ensure dimensional accuracy, streamline production, and maintain global competitiveness.
Buy Documents
ISO 8367-2:1993 - Packaging — Dimensional tolerances for general purpose sacks — Part 2: Sacks made from thermoplastic flexible film Released:12/23/1993
ISO 8367-2:1993 - Emballages — Tolérances dimensionnelles des sacs d'usage général — Partie 2: Sacs faits d'un film thermoplastique flexible Released:12/23/1993
ISO 8367-2:1993 - Emballages — Tolérances dimensionnelles des sacs d'usage général — Partie 2: Sacs faits d'un film thermoplastique flexible Released:12/23/1993
Get Certified
Connect with accredited certification bodies for this standard
BRCGS (Brand Reputation Compliance Global Standards)
Global food safety and quality standards owner.
Sponsored listings
Frequently Asked Questions
ISO 8367-2:1993 is a standard published by the International Organization for Standardization (ISO). Its full title is "Packaging — Dimensional tolerances for general purpose sacks — Part 2: Sacks made from thermoplastic flexible film". This standard covers: The tolerances of the following dimensions of sacks made from thermoplastic flexible film as defined in ISO 6590-2 are specified: thickness of plies, length of sack, width of sack, width of gusset, circumference of sack with gussets, width of bottom, width of valve, position of the leading edge of the valve sleeve, length of the valve sleeve, print position on sack.
The tolerances of the following dimensions of sacks made from thermoplastic flexible film as defined in ISO 6590-2 are specified: thickness of plies, length of sack, width of sack, width of gusset, circumference of sack with gussets, width of bottom, width of valve, position of the leading edge of the valve sleeve, length of the valve sleeve, print position on sack.
ISO 8367-2:1993 is classified under the following ICS (International Classification for Standards) categories: 55.080 - Sacks. Bags. The ICS classification helps identify the subject area and facilitates finding related standards.
ISO 8367-2:1993 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
INTERNATIONAL
IS0 .
STANDARD
8367-2
First edition
1993-12-15
Packaging - Dimensional tolerances for
general purpose sacks -
Part 2:
Sacks made from thermoplastic flexible film
Emballages - Tokrances dimensionnelles des sacs d’usage g&&al -
Partie 2: Sacs faits d’un film thermoplastique flexible
Reference number
IS0 8367-2:1993(E)
IS0 8367=2:1993(E)
Foreword
IS0 (the International Organization for Standardization) is a worldwide
federation of national standards bodies (IS0 member bodies). The work
of preparing International Standards is normally carried out through IS0
technical committees. Each member body interested in a subject for
which a technical committee has been established has the right to be
represented on that committee. International organizations, governmental
and non-governmental, in liaison with ISO, also take part in the work. IS0
collaborates closely with the International Electrotechnical Commission
(IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are
circulated to the member bodies for voting. Publication as an International
Standard requires approval by at least 75 % of the member bodies casting
a vote.
International Standard IS0 8367-2 was prepared by Technical Committee
ISO/TC 122, Packaging, Sub-Committee SC 2, Sacks.
IS0 8367 consists of the following parts, under the general title Packaging
- Dimensional tolerances for general purpose sacks:
- Part 1: Paper sacks
- Part 2: Sacks made from thermoplastic flexible film
0 IS0 1993
All rights reserved. No part of this publication may be reproduced or utilized in any form or
by any means, electronic or mechanical, including photocopying and microfilm, without per-
mission in writing from the publisher.
International Organization for Standardization
Case Postale 56 l CH-1211 Geneve 20 l Switzerland
Printed in Switzerland
ii
INTERNATIONAL STANDARD IS0 8367=2:1993(E)
Packaging - Dimensional tolerances for general
purpose sacks -
Part 2:
Sacks made from thermoplastic flexible film
IS0 6590-2:1986, Packaging - Sacks - Vocabulary
1 Scope
Part 2: Sacks made from thermoplastic
and types -
flexible film.
This part of IS0 8367 specifies a set of tolerances
...
NORME ISO
INTERNATIONALE
8367-2
Première édition
1993-I 2-l 5
Tolérances dimensionnelles
Emballages -
des sacs d’usage général -
Partie 2:
Sacs faits d’un film thermoplastique flexible
Dimensional tolerances for general purpose sacks -
Packaging -
Part 2: Sacks made from thermoplastic flexible film
Numéro de référence
ISO 8367=2:1993(F)
Avant-propos
L’ISO (Organisation internationale de normalisation) est une fédération
mondiale d’organismes nationaux de normalisation (comités membres de
I’ISO). L’élaboration des Normes internationales est en général confiée aux
comités techniques de I’ISO. Chaque comité membre intéresse par une
etude a le droit de faire partie du comité technique crée à cet effet. Les
organisations internationales, gouvernementales et non gouvernemen-
tales, en liaison avec I’ISO participent également aux travaux. L’ISO colla-
bore étroitement avec la Commission électrotechnique internationale (CEI)
en ce qui concerne la normalisation électrotechnique.
Les projets de Normes internationales adoptes par les comités techniques
sont soumis aux comités membres pour vote. Leur publication comme
Normes internationales requiert l’approbation de 75 % au moins des co-
mités membres votants.
La Norme internationale ISO 8367-2 a été élaborée par le comité techni-
que lSO/TC 122, Emballages, sous-comité SC 2, Sacs.
L’ISO 8367 comprend les parties suivantes, présentées sous le titre gé-
néral Emballages - Tokrances dimensionnelles des sacs d’usage
général:
- Partie 1: Sacs en papier
- Partie 2: Sacs faits d’un film thermoplastique flexible
0 ISO 1993
Droits de reproduction réservh. Aucune partie de cette publication ne peut être reproduite
ni utilisee sous quelque forme que ce soit et par aucun procédé, électronique ou mhcanique,
y compris la photocopie et les microfilms, sans l’accord Qcrit de Mditeur.
Organisation internationale de normalisation
Case Postale 56 l CH-l 211 Genève 20 l Suisse
Imprimé en Suisse
II
NORME INTERNATIONALE ISO 8367-2: 1993(F)
Emballages - Tolérances dimensionnelles des sacs
d’usage général -
Partie 2:
Sacs faits d’un film thermoplastique flexible
ISO 6590.2:1986, Emballages - Sacs - Vocabulaire
1 Domaine d’application
et types - Partie 2: Sacs faits d’un film thermoplas-
tique flexible.
La présente partie de I’ISO 8367 prescrit un ensemble
de tolérances applicables à la fabrication de sacs faits
ISO 6591-2:1985, Emballages - Sacs - De
...
NORME ISO
INTERNATIONALE
8367-2
Première édition
1993-I 2-l 5
Tolérances dimensionnelles
Emballages -
des sacs d’usage général -
Partie 2:
Sacs faits d’un film thermoplastique flexible
Dimensional tolerances for general purpose sacks -
Packaging -
Part 2: Sacks made from thermoplastic flexible film
Numéro de référence
ISO 8367=2:1993(F)
Avant-propos
L’ISO (Organisation internationale de normalisation) est une fédération
mondiale d’organismes nationaux de normalisation (comités membres de
I’ISO). L’élaboration des Normes internationales est en général confiée aux
comités techniques de I’ISO. Chaque comité membre intéresse par une
etude a le droit de faire partie du comité technique crée à cet effet. Les
organisations internationales, gouvernementales et non gouvernemen-
tales, en liaison avec I’ISO participent également aux travaux. L’ISO colla-
bore étroitement avec la Commission électrotechnique internationale (CEI)
en ce qui concerne la normalisation électrotechnique.
Les projets de Normes internationales adoptes par les comités techniques
sont soumis aux comités membres pour vote. Leur publication comme
Normes internationales requiert l’approbation de 75 % au moins des co-
mités membres votants.
La Norme internationale ISO 8367-2 a été élaborée par le comité techni-
que lSO/TC 122, Emballages, sous-comité SC 2, Sacs.
L’ISO 8367 comprend les parties suivantes, présentées sous le titre gé-
néral Emballages - Tokrances dimensionnelles des sacs d’usage
général:
- Partie 1: Sacs en papier
- Partie 2: Sacs faits d’un film thermoplastique flexible
0 ISO 1993
Droits de reproduction réservh. Aucune partie de cette publication ne peut être reproduite
ni utilisee sous quelque forme que ce soit et par aucun procédé, électronique ou mhcanique,
y compris la photocopie et les microfilms, sans l’accord Qcrit de Mditeur.
Organisation internationale de normalisation
Case Postale 56 l CH-l 211 Genève 20 l Suisse
Imprimé en Suisse
II
NORME INTERNATIONALE ISO 8367-2: 1993(F)
Emballages - Tolérances dimensionnelles des sacs
d’usage général -
Partie 2:
Sacs faits d’un film thermoplastique flexible
ISO 6590.2:1986, Emballages - Sacs - Vocabulaire
1 Domaine d’application
et types - Partie 2: Sacs faits d’un film thermoplas-
tique flexible.
La présente partie de I’ISO 8367 prescrit un ensemble
de tolérances applicables à la fabrication de sacs faits
ISO 6591-2:1985, Emballages - Sacs - De
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...