IEC 63241-3-3:2025
(Main)Electric motor-operated tools - Dust measurement procedure - Part 3-3: Particular requirements for transportable planers and thicknessers
Electric motor-operated tools - Dust measurement procedure - Part 3-3: Particular requirements for transportable planers and thicknessers
IEC 63241-3-3:2025 applies to transportable planers and thicknessers intended to plane wood.
This document is to be used in conjunction with the first edition of IEC 63241-1:2023.
This document supplements or modifies the corresponding clauses in IEC 63241-1, so as to convert it into the IEC Standard: Particular requirements for transportable planers and thicknessers.
Where a particular subclause of IEC 63241-1 is not mentioned in this document, that subclause applies as far as reasonable. Where this document states "addition", "modification" or "replacement", the relevant text in IEC 63241-1 is to be adapted accordingly.
NOTE The attention of National Committees is drawn to the fact that equipment manufacturers and testing organizations can need a transitional period following publication of a new, amended or revised IEC publication in which to make products in accordance with the new requirements and to equip themselves for conducting new or revised tests.
It is the recommendation of the committee that the content of this publication be adopted for implementation nationally not earlier than 36 months from the date of publication.
General Information
- Status
- Published
- Publication Date
- 05-Aug-2025
- Technical Committee
- TC 116 - Safety of motor-operated electric tools
- Drafting Committee
- WG 11 - TC 116/WG 11
- Current Stage
- PPUB - Publication issued
- Start Date
- 06-Aug-2025
- Completion Date
- 28-Aug-2025
Overview
IEC 63241-3-3:2025 is an international standard developed by the International Electrotechnical Commission (IEC) that specifies particular requirements for dust measurement procedures related to transportable planers and thicknessers. These machines are electric motor-operated tools intended for planing wood, and this part of the standard is designed to supplement and modify the general requirements laid out in IEC 63241-1:2023. By defining specific testing conditions, terms, and procedures, IEC 63241-3-3:2025 aims to ensure consistency, safety, and performance in measuring dust emissions from planers and thicknessers in a variety of working environments.
Key Topics
Scope of Application:
This standard applies specifically to transportable planers and thicknessers used for wood processing, detailing procedures for accurate dust measurement.Terms and Definitions:
Detailed descriptions are provided for “planer” and “thicknesser,” ensuring industry-wide consistency in understanding tool functionality.Test Procedures:
- Clear operating conditions for both planers and thicknessers are established, including workpiece material, tool setup, and blade requirements.
- Emphasis is placed on using newly sharpened blades and controlling feed forces and speeds to simulate real usage.
- Indicates how to carry out multiple planing operations to reflect true working conditions.
Instrumentation:
Calls for the use of suitable measuring equipment as described in IEC 63241-1:2023 to ensure accuracy and repeatability.Reporting Requirements:
Specifies the information to be included in test reports, such as details on cycle time extensions if the required number of workpieces is not completed within 10 minutes.
Applications
Adopting IEC 63241-3-3:2025 provides substantial practical value across the wood processing and manufacturing industries:
Manufacturers:
Tool manufacturers can use this standard to evaluate and improve the dust containment efficiency of their transportable planers and thicknessers before market release, ensuring compliance with international safety requirements.Testing Laboratories:
Accredited labs rely on these procedures to provide consistent, comparable dust emission data, supporting certification and regulatory compliance.Occupational Health and Safety:
By defining dust measurement protocols, the standard facilitates assessment of workplace exposure, contributing to worker protection and compliance with occupational health standards.National and Regional Regulators:
Regulatory bodies can reference this standard when establishing or updating local requirements for dust control in woodworking and furniture manufacturing sectors.Procurement and Specification:
Buyers and end-users can request evidence of compliance with IEC 63241-3-3 as part of procurement processes, ensuring they select machines with proven dust management capabilities.
Related Standards
For comprehensive compliance and industry alignment, IEC 63241-3-3:2025 is designed to be used in conjunction with related standards, including:
IEC 63241-1:2023
Electric motor-operated tools - Dust measurement procedure - Part 1: General requirements
(this is the core standard to which 3-3 provides particular requirements)IEC 63241 Series
Contains additional parts addressing dust measurement procedures for various types of electric motor-operated tools used in woodworking and related industries.ISO/IEC Directives
The development and drafting process aligns with the general principles outlined in the ISO/IEC Directives, ensuring international compatibility.
By adopting IEC 63241-3-3:2025, manufacturers, laboratories, and regulators benefit from a harmonized, reliable dust measurement procedure tailored for transportable planers and thicknessers. This standard is critical for enhancing workplace safety, product quality, and regulatory compliance in the global woodworking industry.
Get Certified
Connect with accredited certification bodies for this standard
DVS-ZERT GmbH
German welding certification society.
CARES (UK Certification Authority for Reinforcing Steels)
UK certification for reinforcing steels and construction.
EWF/IIW (European/International Welding Federation)
International welding personnel certification.
Sponsored listings
Frequently Asked Questions
IEC 63241-3-3:2025 is a standard published by the International Electrotechnical Commission (IEC). Its full title is "Electric motor-operated tools - Dust measurement procedure - Part 3-3: Particular requirements for transportable planers and thicknessers". This standard covers: IEC 63241-3-3:2025 applies to transportable planers and thicknessers intended to plane wood. This document is to be used in conjunction with the first edition of IEC 63241-1:2023. This document supplements or modifies the corresponding clauses in IEC 63241-1, so as to convert it into the IEC Standard: Particular requirements for transportable planers and thicknessers. Where a particular subclause of IEC 63241-1 is not mentioned in this document, that subclause applies as far as reasonable. Where this document states "addition", "modification" or "replacement", the relevant text in IEC 63241-1 is to be adapted accordingly. NOTE The attention of National Committees is drawn to the fact that equipment manufacturers and testing organizations can need a transitional period following publication of a new, amended or revised IEC publication in which to make products in accordance with the new requirements and to equip themselves for conducting new or revised tests. It is the recommendation of the committee that the content of this publication be adopted for implementation nationally not earlier than 36 months from the date of publication.
IEC 63241-3-3:2025 applies to transportable planers and thicknessers intended to plane wood. This document is to be used in conjunction with the first edition of IEC 63241-1:2023. This document supplements or modifies the corresponding clauses in IEC 63241-1, so as to convert it into the IEC Standard: Particular requirements for transportable planers and thicknessers. Where a particular subclause of IEC 63241-1 is not mentioned in this document, that subclause applies as far as reasonable. Where this document states "addition", "modification" or "replacement", the relevant text in IEC 63241-1 is to be adapted accordingly. NOTE The attention of National Committees is drawn to the fact that equipment manufacturers and testing organizations can need a transitional period following publication of a new, amended or revised IEC publication in which to make products in accordance with the new requirements and to equip themselves for conducting new or revised tests. It is the recommendation of the committee that the content of this publication be adopted for implementation nationally not earlier than 36 months from the date of publication.
IEC 63241-3-3:2025 is classified under the following ICS (International Classification for Standards) categories: 25.080.25 - Planing machines; 25.140.20 - Electric tools. The ICS classification helps identify the subject area and facilitates finding related standards.
IEC 63241-3-3:2025 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
IEC 63241-3-3 ®
Edition 1.0 2025-08
INTERNATIONAL
STANDARD
Electric motor-operated tools - Dust measurement procedure -
Part 3-3: Particular requirements for transportable planers and thicknessers
ICS 25.080.25; 25.140.20 ISBN 978-2-8327-0603-9
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or
by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either
IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC copyright
or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local
IEC member National Committee for further information.
IEC Secretariat Tel.: +41 22 919 02 11
3, rue de Varembé info@iec.ch
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.
IEC publications search - IEC Products & Services Portal - products.iec.ch
webstore.iec.ch/advsearchform Discover our powerful search engine and read freely all the
The advanced search enables to find IEC publications by a publications previews, graphical symbols and the glossary.
variety of criteria (reference number, text, technical With a subscription you will always have access to up to date
committee, …). It also gives information on projects, content tailored to your needs.
replaced and withdrawn publications.
Electropedia - www.electropedia.org
The world's leading online dictionary on electrotechnology,
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published containing more than 22 500 terminological entries in English
details all new publications released. Available online and and French, with equivalent terms in 25 additional languages.
once a month by email. Also known as the International Electrotechnical Vocabulary
(IEV) online.
IEC Customer Service Centre - webstore.iec.ch/csc
If you wish to give us your feedback on this publication or
need further assistance, please contact the Customer
Service Centre: sales@iec.ch.
CONTENTS
FOREWORD . 2
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Test procedure . 4
5 Instrumentation. 6
6 Information to be reported . 6
Table 101 – Operating conditions for planers . 5
Table 102 – Operating conditions for thicknessers . 6
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
Electric motor-operated tools - Dust measurement procedure -
Part 3-3: Particular requirements for transportable planers and
thicknessers
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as "IEC Publication(s)"). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) IEC draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). IEC takes no position concerning the evidence, validity or applicability of any claimed patent rights in
respect thereof. As of the date of publication of this document, IEC had not received notice of (a) patent(s), which
may be required to implement this document. However, implementers are cautioned that this may not represent
the latest information, which may be obtained from the patent database available at https://patents.iec.ch. IEC
shall not be held responsible for identifying any or all such patent rights.
IEC 63241-3-3 has been prepared by IEC technical committee 116: Safety of motor-operated
electric tools. It is an International Standard.
The text of this International Standard is based on
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...