EN 61753-141-2:2011

SLOVENSKI STANDARD
01-september-2011
2SWLþQLVSRMQLHOHPHQWLLQSDVLYQHNRPSRQHQWH7HKQLþQLVWDQGDUGGHO
2SWLþQLSDVLYQLNRPSHQ]DWRUEDUYQHUD]SUãHQRVWLGLVSHU]LMHNLXSRUDEOMD
HQRURGQRYODNQRVNRPSHQ]DFLMRUD]SUãHQRVWLGLVSHU]LMH]DNDWHJRULMR&
1DG]RURYDQDRNROMD,(&
Fibre optic interconnecting devices and passive components - Performance standard -
Part 141-2: Fibre optic passive chromatic dispersion compensator using single-mode
dispersion compensating fibre for category C - Controlled environments (IEC 61753-141-
2:2011)
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil
141-2: Passiver chromatischer Dispersionskompensator mit
dispersionskompensierender Einmodenfaser für die Kategorie C - Kontrollierte
Umgebung (IEC 61753-141-2:2011)
Dispositifs d'interconnexion et composants passifs à fibres optiques - Norme de
performance - Partie 141-2: Compensateur de dispersion chromatique passif à fibres
optiques utilisant une fibre à compensation de dispersion unimodale pour la catégorie C -
Environnements contrôlés (CEI 61753-141-2:2011)
Ta slovenski standard je istoveten z: EN 61753-141-2:2011
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 61753-141-2
NORME EUROPÉENNE
May 2011
EUROPÄISCHE NORM
ICS 33.180.20
English version
Fibre optic interconnecting devices and passive components -
Performance standard -
Part 141-2: Fibre optic passive chromatic dispersion compensator using
single-mode dispersion compensating fibre for category C -
Controlled environments
(IEC 61753-141-2:2011)
Dispositifs d'interconnexion et composants Lichtwellenleiter -
passifs à fibres optiques - Verbindungselemente und passive
Norme de performance - Bauteile -
Partie 141-2: Compensateur de dispersion Betriebsverhalten -
chromatique passif à fibres optiques Teil 141-2: Passiver chromatischer
utilisant une fibre à compensation de Dispersionskompensator mit
dispersion unimodale pour la catégorie C - dispersionskompensierender
Environnements contrôlés Einmodenfaser für die Kategorie C -
(CEI 61753-141-2:2011) Kontrollierte Umgebung
(IEC 61753-141-2:2011)
This European Standard was approved by CENELEC on 2011-05-25. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels

© 2011 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 61753-141-2:2011 E

Foreword
The text of document 86B/3162/FDIS, future edition 1 of IEC 61753-141-2, prepared by SC 86B, Fibre
optic interconnecting devices and passive components, of IEC TC 86, Fibre optics, was submitted to the
IEC-CENELEC parallel vote and was approved by CENELEC as EN 61753-141-2 on 2011-05-25.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent
rights.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
(dop) 2012-02-25
national standard or by endorsement
– latest date by which the national standards conflicting
(dow) 2014-05-25
with the EN have to be withdrawn
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61753-141-2:2011 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 61753-1 NOTE  Harmonized as EN 61753-1.
IEC 62074-1 NOTE  Harmonized as EN 62074-1.
__________
- 3 - EN 61753-141-2:2011
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year

IEC 60793-2-50 - Optical fibres - EN 60793-2-50 -
Part 2-50: Product specifications - Sectional
specification for class B single-mode fibres

IEC 61300-2-1 - Fibre optic interconnecting devices and EN 61300-2-1 -
passive components - Basic test and
measurement procedures -
Part 2-1: Tests - Vibration (sinusoidal)

IEC 61300-2-4 - Fibre optic interconnecting devices and EN 61300-2-4 -
passive components - Basic test and
measurement procedures -
Part 2-4: Tests - Fibre/cable retention

IEC 61300-2-9 - Fibre optic interconnecting devices and EN 61300-2-9 -
passive components - Basic test and + AC:2011
measurement procedures -
Part 2-9: Tests - Shock
IEC 61300-2-17 - Fibre optic interconnecting devices and EN 61300-2-17 -
passive components - Basic test and
measurement procedures -
Part 2-17: Tests - Cold
IEC 61300-2-18 - Fibre optic interconnecting devices and EN 61300-2-18 -
passive components - Basic test and
measurement procedures -
Part 2-18: Tests - Dry heat - High temperature
endurance
IEC 61300-2-19 - Fibre optic interconnecting devices and EN 61300-2-19 -
passive components - Basic test and
measurement procedures -
Part 2-19: Tests - Damp heat (steady state)

IEC 61300-2-22 - Fibre optic interconnecting devices and EN 61300-2-22 -
passive components - Basic test and
measurement procedures -
Part 2-22: Tests - Change of temperature

IEC 61300-2-42 - Fibre optic interconnecting devices and EN 61300-2-42 -
passive components - Basic test and
measurement procedures -
Part 2-42: Tests - Static side load for
connectors
IEC 61300-2-44 - Fibre optic interconnecting devices and EN 61300-2-44 -
passive components - Basic test and
measurement procedures -
Part 2-44: Tests - Flexing of the strain relief of
fibre optic devices
Publication Year Title EN/HD Year

IEC 61300-3-2 - Fibre optic interconnecting devices and EN 61300-3-2 -
passive components - Basic test and
measurement procedures -
Part 3-2: Examinations and measurements -
Polarization dependent loss in a single-mode
fibre optic device
IEC 61300-3-4 - Fibre optic interconnecting devices and EN 61300-3-4 -
passive components - Basic test and
measurement procedures -
Part 3-4: Examinations and measurements -
Attenuation
1)
IEC 61300-3-7 - Fibre optic interconnecting devices and FprEN 61300-3-7 -
passive components - Basic test and
measurement procedures -
Part 3-7: Examinations and measurements -
Wavelength dependence of attenuation and
return loss of single mode components

IEC 61300-3-32 - Fibre optic interconnecting devices and EN 61300-3-32 -
passive components - Basic test and
measurement procedures -
Part 3-32: Examinations and measurements -
Polarisation mode dispersion measurement
for passive optical components

IEC/PAS 61300-3-38 - Fibre optic interconnecting devices and - -
passive components - Basic test and
measurement procedures -
Part 3-38: Group delay and chromatic
dispersion
IEC 61753-021-2 - Fibre optic interconnecting devices and EN 61753-021-2 -
passive components performance standard -
Part 021-2: Grade C/3 single-mode fibre optic
connectors for category C - Controlled
environment
IEC 61978-1 - Fibre optic interconnecting devices and EN 61978-1 -
passive components - Fibre optic passive
chromatic dispersion compensators -
Part 1: Generic specification
ITU-T - Optical system design and engineering - -
Recommendation considerations
G.Sup39
1)
At draft stage.
IEC 61753-141-2 ®
Edition 1.0 2011-04
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Fibre optic interconnecting devices and passive components – Performance
standard –
Part 141-2: Fibre optic passive chromatic dispersion compensator using
single-mode dispersion compensating fibre for category C – Controlled
environments
Dispositifs d'interconnexion et composants passifs à fibres optiques – Norme de
performance –
Partie 141-2: Compensateur de dispersion chromatique passif à fibres optiques
utilisant une fibre à compensation de dispersion unimodale pour la catégorie C –
Environnements contrôlés
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX N
ICS 33.180.20 ISBN 978-2-88912-452-7

– 2 – 61753-141-2  IEC:2011
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 6
4 Test . 7
5 Test report. 7
6 Performance requirements . 7
6.1 Reference components . 7
6.2 Dimensions . 7
6.3 Test details and requirements . 7
Annex A (normative) Sample size . 14
Bibliography . 15

Table 1 – Test and requirements for single channel application . 8
Table 2 – Test and requirements for C-band WDM application . 9
Table 3 – Test and requirements for L-band WDM application . 10
Table 4 – Test and requirements for all applications . 11
Table A.1 – Sample size for the tests in Table 1 . 14
Table A.2 – Sample size for the tests in Table 2 . 14

61753-141-2  IEC:2011 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FIBRE OPTIC INTERCONNECTING DEVICES
AND PASSIVE COMPONENTS –
PERFORMANCE STANDARD –
Part 141-2: Fibre optic passive chromatic dispersion compensator using
single-mode dispersion compensating fibre for category C –
Controlled environments
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 61753-141-2 has been prepared by subcommittee 86B: Fibre optic
interconnecting devices and passive components of IEC technical committee 86: Fibre optics.
The text of this standard is based on the following documents:
FDIS Report on voting
86B/3162/FDIS 86B/3200/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.

– 4 – 61753-141-2  IEC:2011
A list of all parts of the IEC 61753 series, published under the general title Fibre optic
interconnecting devices and passive components – Performance standard can be found on the
IEC website.
The committee has decided that the contents of this publication will remain unchanged until
the stability date indicated on the IEC web site under "http://webstore.iec.ch" in the data
related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
61753-141-2  IEC:2011 – 5 –
FIBRE OPTIC INTERCONNECTING DEVICES
AND PASSIVE COMPONENTS –
PERFORMANCE STANDARD –
Part 141-2: Fibre optic passive chromatic dispersion compensator using
single-mode dispersion compensating fibre for category C –
Controlled environments
1 Scope
This part of IEC 61753 contains the minimum test and measurement requirements and
severity levels that a fibre optic passive chromatic dispersion compensator (PCDC) using
single-mode dispersion compensating fibre (DCF) must satisfy in order to be categorised as
meeting the IEC standard, Category C – Contro
...