Abstract

This part of IEC 60695 specifies methodologies of fire safety engineering for electrotechnical products by providing:
– an explanation of the principles and uses of fire safety engineering;
– guidance on the use of fire safety engineering in the design of electrotechnical products;
– fire safety engineering terminology, and concepts;
– an indication of properties, data and tests needed for input into fire safety engineering assessment; and
– informative references.
This document is intended to provide guidance for product committees on fire safety engineering methods and performance-based tests for use in performance-based designs and fire hazard assessments of electrotechnical materials, assemblies, products and systems. More detailed information on fire safety engineering is contained in ISO 23932-1 [1].
NOTE Further detailed aspects of FSE are covered in ISO 16730-1 [2], ISO 16732-1 [3], ISO 16733-1 [4], ISO 24678-2 [5], ISO 24678-3 [6], ISO 24678-4 [7] and ISO/TR 16738 [8].
This basic safety publication focusing on safety guidance is primarily intended for use by committees in the preparation of safety publications in accordance with the principles laid down in IEC Guide 104 [39] and ISO/IEC Guide 51 [40]
One of the responsibilities of a committee is, wherever applicable, to make use of basic safety publications in the preparation of its publications.
This document has the status of a horizontal publication in accordance with IEC Guide 108 [43].

Status
Published
Publication Date
05-Nov-2026
Current Stage
6060 - Document made available - Publishing
Start Date
06-Nov-2026
Due Date
28-Nov-2025
Completion Date
06-Nov-2026

Buy Documents

Standard

EN IEC 60695-1-12:2027

English language (24 pages)
Preview
Preview
e-Library read for
×1 day

EN IEC 60695-1-12:2026 is a CLC/IEC guide in the Fire hazard testing series for assessing the fire hazard of electrotechnical products. It explains how fire safety engineering (FSE) is used for performance-based fire hazard assessment, including the objectives, data, tests and evaluation steps that matter in practice. The document is aimed at product committees, engineers and others preparing standards for electrotechnical materials, assemblies, products and systems.

What does EN IEC 60695-1-12:2026 specify?

EN IEC 60695-1-12:2026 specifies methodologies of fire safety engineering for electrotechnical products. It gives guidance on the principles and uses of FSE, the terminology and concepts involved, and the kinds of properties, data and tests needed as input to an FSE assessment.

The document is organized into 12 clauses, followed by a bibliography and one informative annex.

AnnexWhat it covers
Annex AAn example application of FSE, using a method for predicting flammability of materials in a microgravity environment

The scope also makes clear that EN IEC 60695-1-12:2026 is guidance for performance-based designs and fire hazard assessments, not a stand-alone product test standard. The requirements, test methods and test conditions apply only when they are specifically referenced or included in the relevant publications.

What are the key requirements of EN IEC 60695-1-12:2026?

EN IEC 60695-1-12:2026 is mainly a guidance document, so the key points are the methods and selection rules it sets out for using FSE on electrotechnical products. In practice, it tells a committee or engineer what has to be defined, measured and justified before FSE results can support a design decision.

Clause 4 - use an FSE process based on scientific calculation

Clause 4 describes the fire safety engineering process as a structured sequence from project scope to final report, including identifying fire safety objectives, design fire scenarios, engineering methods and management actions. Figure 1 shows the design, implementation and management flow.

In practice, this means FSE should be treated as a full design process, not a single calculation. The standard also says quantitative fire tests provide input data for the calculations.

Clause 5 - use FSE where it adds value

Clause 5 lists the benefits of FSE, including quantitative design decisions, comparison of design options, support for performance-based design, and help with innovation and change from prescriptive to performance requirements.

In practice, this matters when a project is too complex for prescriptive rules alone, such as large transport hubs, tall buildings, tunnels, power generation plants or large atria. The clause explains why FSE is used as a design and regulatory tool.

Clause 6 - define objectives in terms of safety outcomes

Clause 6 breaks fire safety into objectives such as safety of life, conservation of property, continuity of operation, protection of the natural environment and preservation of heritage. For life safety, it uses available safe escape time (ASET) and required safe escape time (RSET), with ASET needing to exceed RSET plus a safety margin.

In practice, this gives a way to turn a general safety goal into something measurable. A design team has to state what outcome is being protected and how that outcome will be judged.

Clause 7 - link objectives to functional requirements

Clause 7 says each FSE objective should be associated with one or more functional requirements. Examples include limiting flame spread beyond the compartment, controlling smoke movement, maintaining ASET, preventing loss of electrical power before evacuation is complete, and keeping public safety communications operating.

In practice, this tells a committee to translate a safety aim into functions that a product, system or installation must deliver. That makes the design checkable.

Clause 8 - choose explicit or implicit performance criteria

Clause 8 distinguishes explicit performance criteria from implicit ones. Explicit criteria are quantitative measurements, such as visibility or exposure dose after a defined fire exposure, and they are supported by quantitative fire tests. Implicit criteria rely on prescriptive requirements and on statistics or calculated predictions from known performance.

In practice, explicit criteria are the better fit for performance-based design because they produce measurable data that can be compared across products and scenarios. The clause also says test results should relate to actual use conditions and be expressed in defined scientific units.

Clause 9 - define the design fire scenario and the design fire

Clause 9 says the design fire scenario should describe the hazards, ignition events, protection measures and fire consequences. It also says the design fire is the assumed fire behaviour used for calculations, which may be simple or may require modelling of growth, fully developed fire and decay stages.

In practice, this means the engineer must first decide what fire is being analysed, then define the fire curve or scenario used in the calculations. Table 1 gives examples such as room fires, cable fires, tunnel fires and façade fires.

Clauses 10 to 12 - use fit-for-purpose data and tests

Clause 10 says the scenario description has to include the room or volume, combustibles, detection and suppression, and expected actions in a fire. It also identifies the kinds of data needed, including combustion heat, reaction-to-fire properties, fire resistance, fire effluent behaviour and relevant physical properties.

Clauses 11 and 12 then explain how tests on electrotechnical products should support FSE. The test data should be quantitative, representative of the scenario, and suitable for predictive methods, whether the product is the source of ignition or the victim of an external fire.

What terms does EN IEC 60695-1-12:2026 define?

EN IEC 60695-1-12:2026 uses terms from IEC 60695-4:2021 and ISO 13943:2017. The most important ones for readers are:

  • Fire safety engineering (FSE) - the use of engineering methods and scientific principles to assess or design fire safety for specific fire scenarios or for a group of scenarios.
  • Design fire scenario - the set of hazards, initiating events, protection measures and consequences used to test whether requirements can be met.
  • Design fire - the assumed fire characteristics used in the calculations for a chosen scenario.
  • Available safe escape time (ASET) - the time available for safe evacuation before conditions become unsafe.
  • Required safe escape time (RSET) - the time needed for evacuation to be completed safely.
  • Explicit performance criteria - quantitative measures such as visibility or exposure dose used to judge performance directly.
  • Implicit performance criteria - criteria based on prescriptive requirements and expected or calculated performance from known data.

Who uses EN IEC 60695-1-12:2026?

EN IEC 60695-1-12:2026 is used by product committees that prepare standards for electrotechnical materials, assemblies, products and systems. It is also relevant to fire safety engineers, design teams and test specialists who need to connect product data to performance-based fire hazard assessments.

The document is particularly relevant where electrotechnical products are part of larger fire safety questions, such as buildings, transport vehicles and systems, data centres, transformer enclosures, cable trays and concealed service spaces. It also supports work in sectors where FSE is used for performance-based regulation, including transport infrastructure, power generation and complex occupied spaces.

What changed in EN IEC 60695-1-12:2026 from the previous edition?

EN IEC 60695-1-12:2026 is the second edition, and the foreword states that it cancels and replaces the first edition published in 2015. The foreword also says that this edition constitutes a technical revision.

Which standards are used with EN IEC 60695-1-12:2026?

EN IEC 60695-1-12:2026 is to be used with IEC 60695-1-10 and IEC 60695-1-11.

ReferenceWhat it contributes
IEC 60695-1-10Guidance for assessing the fire hazard of electrotechnical products - general guidelines, including how to use qualitative and quantitative fire tests
IEC 60695-1-11Fire hazard assessment guidance for electrotechnical products
IEC 60695-4:2021Terminology concerning fire tests for electrotechnical products
ISO 13943:2017Fire safety vocabulary used for the terms and definitions in this document

The introduction also points readers to related FSE references such as ISO 23932-1 and other ISO fire safety engineering parts, which give more detailed methodology and supporting concepts.

What does the EN IEC 60695-1-12:2026 document contain?

EN IEC 60695-1-12:2026 contains a process-oriented explanation of FSE, a short overview of its benefits, and clauses on objectives, functional requirements, performance criteria, design fire scenarios, design fires, data and testing. It also includes a figure showing the FSE process and tables that illustrate design fire scenarios and common ignition phenomena in electrotechnical products.

Clause 11 explains how fire tests should generate quantitative data that can be used in predictive methods, and Clause 12 splits the evaluation into two cases: when the electrotechnical product is the source of ignition and when it is exposed as the victim of an external fire. Annex A gives an informative example of applying FSE to predict flammability in a microgravity environment.

Relations

Effective Date
19-Mar-2024
Effective Date
20-Oct-2026
Effective Date
20-Oct-2026
Effective Date
20-Oct-2026
Effective Date
20-Oct-2026
Effective Date
10-Nov-2026
Effective Date
10-Nov-2026
Effective Date
10-Nov-2026

Buy Documents

Standard

EN IEC 60695-1-12:2027

English language (24 pages)
Preview
Preview
e-Library read for
×1 day

Get Certified

Connect with accredited certification bodies for this standard

IMQ S.p.A. (Certification)

Italian electrical product certification.

ACCREDIA Italy Verified

SLG Prüf- und Zertifizierungs GmbH

German testing and certification body.

DAKKS Germany Verified

UL Solutions

Global safety science company with testing, inspection and certification.

ANAB United States Verified

Sponsored listings

Frequently Asked Questions

EN IEC 60695-1-12:2026 is a standard published by CLC. Its full title is "Fire hazard testing - Part 1-12: Guidance for assessing the fire hazard of electrotechnical products - Fire safety engineering". This standard covers: This part of IEC 60695 specifies methodologies of fire safety engineering for electrotechnical products by providing: – an explanation of the principles and uses of fire safety engineering; – guidance on the use of fire safety engineering in the design of electrotechnical products; – fire safety engineering terminology, and concepts; – an indication of properties, data and tests needed for input into fire safety engineering assessment; and – informative references. This document is intended to provide guidance for product committees on fire safety engineering methods and performance-based tests for use in performance-based designs and fire hazard assessments of electrotechnical materials, assemblies, products and systems. More detailed information on fire safety engineering is contained in ISO 23932-1 [1]. NOTE Further detailed aspects of FSE are covered in ISO 16730-1 [2], ISO 16732-1 [3], ISO 16733-1 [4], ISO 24678-2 [5], ISO 24678-3 [6], ISO 24678-4 [7] and ISO/TR 16738 [8]. This basic safety publication focusing on safety guidance is primarily intended for use by committees in the preparation of safety publications in accordance with the principles laid down in IEC Guide 104 [39] and ISO/IEC Guide 51 [40] One of the responsibilities of a committee is, wherever applicable, to make use of basic safety publications in the preparation of its publications. This document has the status of a horizontal publication in accordance with IEC Guide 108 [43].

This part of IEC 60695 specifies methodologies of fire safety engineering for electrotechnical products by providing: – an explanation of the principles and uses of fire safety engineering; – guidance on the use of fire safety engineering in the design of electrotechnical products; – fire safety engineering terminology, and concepts; – an indication of properties, data and tests needed for input into fire safety engineering assessment; and – informative references. This document is intended to provide guidance for product committees on fire safety engineering methods and performance-based tests for use in performance-based designs and fire hazard assessments of electrotechnical materials, assemblies, products and systems. More detailed information on fire safety engineering is contained in ISO 23932-1 [1]. NOTE Further detailed aspects of FSE are covered in ISO 16730-1 [2], ISO 16732-1 [3], ISO 16733-1 [4], ISO 24678-2 [5], ISO 24678-3 [6], ISO 24678-4 [7] and ISO/TR 16738 [8]. This basic safety publication focusing on safety guidance is primarily intended for use by committees in the preparation of safety publications in accordance with the principles laid down in IEC Guide 104 [39] and ISO/IEC Guide 51 [40] One of the responsibilities of a committee is, wherever applicable, to make use of basic safety publications in the preparation of its publications. This document has the status of a horizontal publication in accordance with IEC Guide 108 [43].

EN IEC 60695-1-12:2026 is classified under the following ICS (International Classification for Standards) categories: 13.220.40 - Ignitability and burning behaviour of materials and products; 29.020 - Electrical engineering in general. The ICS classification helps identify the subject area and facilitates finding related standards.

EN IEC 60695-1-12:2026 has the following relationships with other standards: It is inter standard links to EN IEC 60695-1-12:2020, EN IEC 60695-4:2021, EN 60695-1-10:2017, EN ISO 13943:2017, EN 60695-1-11:2015, EN 60695-1-30:2017, EN 60695-1-20:2016, EN IEC 60695-11-11:2021. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

EN IEC 60695-1-12:2026 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.

Standards Content (Sample)


SLOVENSKI STANDARD
01-januar-2027
Nadomešča:
SIST EN IEC 60695-1-12:2020
Preskušanje požarne ogroženosti - 1-12. del: Navodilo za ocenjevanje požarne
varnosti elektrotehniških izdelkov - Požarno inženirstvo (IEC 60695-1-12:2026)
Fire hazard testing - Part 1-12: Guidance for assessing the fire hazard of electrotechnical
products - Fire safety engineering (IEC 60695-1-12:2026)
Prüfungen zur Beurteilung der Brandgefahr - Teil 1-12: Anleitung zur Beurteilung der
Brandgefahr von elektrotechnischen Erzeugnissen - Brandschutzingenieurwesen (IEC
60695-1-12:2026)
Essais relatifs aux risques du feu - Partie 1-12: Lignes directrices pour l'évaluation des
risques du feu des produits électrotechniques - Ingénierie de la sécurité incendie (IEC
60695-1-12:2026)
Ta slovenski standard je istoveten z: EN IEC 60695-1-12:2026
ICS:
13.220.40 Sposobnost vžiga in Ignitability and burning
obnašanje materialov in behaviour of materials and
proizvodov pri gorenju products
29.020 Elektrotehnika na splošno Electrical engineering in
general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 60695-1-12

NORME EUROPÉENNE
EUROPÄISCHE NORM November 2026
ICS 13.220.40; 29.020 Supersedes EN IEC 60695-1-12:2020
English Version
Fire hazard testing - Part 1-12: Guidance for assessing the fire
hazard of electrotechnical products - Fire safety engineering
(IEC 60695-1-12:2026)
Essais relatifs aux risques du feu - Partie 1-12: Prüfungen zur Beurteilung der Brandgefahr - Teil 1-12:
Recommandations pour l'évaluation des risques du feu des Anleitung zur Beurteilung der Brandgefahr von
produits électrotechniques - Ingénierie de la sécurité elektrotechnischen Erzeugnissen -
incendie Brandschutzingenieurwesen
(IEC 60695-1-12:2026) (IEC 60695-1-12:2026)
This European Standard was approved by CENELEC on 2026-10-30. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2026 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 60695-1-12:2026 E

European foreword
The text of document 89/1631/CDV, future edition 2 of IEC 60695-1-12, prepared by TC 89 "Fire
hazard testing" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2027-11-30
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2029-11-30
document have to be withdrawn
This document supersedes EN IEC 60695-1-12:2020 and all of its amendments and corrigenda (if
any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
This document is read in conjunction with EN 60695-1-10 and EN 60695-1-11.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 60695-1-12:2026 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standard indicated:
IEC 60695-6-2 NOTE Approved as EN IEC 60695-6-2
IEC 60695-7-2 NOTE Approved as EN IEC 60695-7-2
IEC 60695-8-2 NOTE Approved as EN 60695-8-2
IEC 60695-9-2 NOTE Approved as EN IEC 60695-9-2
ISO 9239-1:2025 NOTE Approved as EN ISO 9239-1:2025 (not modified)
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cencenelec.eu.
Publication Year Title EN/HD Year
IEC 60695-1-10 2016 Fire hazard testing - Part 1-10: Guidance EN 60695-1-10 2017
for assessing the fire hazard of
electrotechnical products - General
guidelines
IEC 60695-1-11 - Fire hazard testing - Part 1-11: Guidance EN 60695-1-11 -
for assessing the fire hazard of
electrotechnical products - Fire hazard
assessment
IEC 60695-4 2021 Fire hazard testing - Part 4: Terminology EN IEC 60695-4 2021
concerning fire tests for electrotechnical
products
ISO 13943 2017 Fire safety - Vocabulary EN ISO 13943 2017

This standard has been withdrawn and replaced with EN ISO 13943:2023.
IEC 60695-1-12 ®
Edition 2.0 2026-09
INTERNATIONAL
STANDARD
BASIC SAFETY PUBLICATION
HORIZONTAL PUBLICATION
Fire hazard testing -
Part 1-12: Guidance for assessing the fire hazard of electrotechnical products -
Fire safety engineering
ICS 13.220.40; 29.020  ISBN 978-2-8327-1519-2

IEC 60695-1-12:2026-09(en)
IEC 60695-1-12:2026 © IEC 2026
CONTENTS
FOREWORD . 2
INTRODUCTION . 4
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 The fire safety engineering process . 7
4.1 General . 7
4.2 Fire safety engineering calculations . 8
4.3 Validity of methods . 9
5 Benefits of fire safety engineering . 9
6 Objectives of fire safety engineering . 10
6.1 General . 10
6.2 Safety of life . 10
6.3 Conservation of property . 10
6.4 Continuity of operation . 10
6.5 Protection of the natural environment . 11
6.6 Preservation of heritage . 11
7 Functional requirements . 11
8 Performance criteria . 11
8.1 General . 11
8.2 Explicit performance criteria . 11
8.3 Implicit performance criteria . 12
9 Design fire scenarios and design fires . 12
9.1 Design fire scenarios . 12
9.2 Design fires . 13
10 Data for fire safety engineering . 13
11 Tests on electrotechnical products. 14
11.1 General . 14
11.2 Condition for evaluation in fire tests . 14
11.3 Test selection and/or development . 14
12 Evaluation of electrotechnical products . 15
12.1 As the source of ignition of a fire . 15
12.2 As the victim of a fire . 16
Annex A (informative) An example of application of Fire Safety Engineering (FSE)
Method for prediction of flammability of materials in microgravity environment . 17
A.1 Background . 17
A.2 Method of application of Fire Safety Engineering (FSE) to predict the
flammability of materials in microgravity environment . 17
A.3 Details of the application of FSE . 17
Bibliography . 18

Figure 1 – FSE process – Design, implementation and management . 8

Table 1 – Examples of design fire scenario . 12
Table 2 – Common ignition phenomena encountered in electrotechnical products . 15
IEC 60695-1-12:2026 © IEC 2026
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
Fire hazard testing -
Part 1-12: Guidance for assessing the fire hazard
of electrotechnical products - Fire safety engineering

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as "IEC Publication(s)"). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) IEC draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). IEC takes no position concerning the evidence, validity or applicability of any claimed patent rights in
respect thereof. As of the date of publication of this document, IEC had not received notice of (a) patent(s), which
may be required to implement this document. However, implementers are cautioned that this may not represent
the latest information, which may be obtained from the patent database available at https://patents.iec.ch. IEC
shall not be held responsible for identifying any or all such patent rights.
IEC 60695-1-12 has been prepared by IEC technical committee 89: Fire hazard testing. It is an
International Standard.
This document has been given the status of a horizontal document in accordance with the
ISO/IEC Directives, Part 1. It has the status of a basic safety publication in accordance with
IEC Guide 104 and ISO/IEC Guide 51.
This second edition cancels and replaces the first edition published in 2015. This edition
constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous
edition:
a) whole text is renewed to contain the most recent technologies of fire safety engineering
mainly developed by ISO/TC92 Fire safety SC4 Fire safety engineering.
IEC 60695-1-12:2026 © IEC 2026
b) Annex A is changed to show example of application of FSE in an international standard.
The text of this International Standard is based on the following documents:
Draft Report on voting
89/1631/CDV 89/1670/RVC
Full information on the voting for its approval can be found in the report on voting indicated in
the above table.
The language used for the development of this International Standard is English.
This document has been drafted in accordance with the ISO/IEC Directives, Part 2, and
developed in accordance with ISO/IEC Directives, Part 1 and ISO/IEC Directives, IEC
Supplement, available at www.iec.ch/members_experts/reference. The main document types
developed by IEC are described in greater detail at www.iec.ch/publications.
A list of all the parts in the 60695 series, under the general title Fire hazard testing, can be
found on the IEC web site.
IEC 60695-1 consists of the following parts:
Part 1-10: Guidance for assessing the fire hazard of electrotechnical products - General
guidelines
Part 1-11: Guidance for assessing the fire hazard of electrotechnical products - Fire hazard
assessment
Part 1-12: Guidance for assessing the fire hazard of electrotechnical products - Fire safety
engineering
Part 1-30: Guidance for assessing the fire hazard of electrotechnical products - Preselection
testing process - General guidelines
Part 1-40: Guidance for assessing the fire hazard of electrotechnical products - Insulating
liquids.
This document is to be used in conjunction with IEC 60695-1-10 and IEC 60695-1-11.
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under webstore.iec.ch in the data related to the
specific document. At this date, the document will be
– reconfirmed,
– withdrawn, or
– revised.
IEC 60695-1-12:2026 © IEC 2026
INTRODUCTION
Fire safety engineering
Fire safety engineering (FSE) is the application of engineering methods based on scientific
principles to the development or assessment of designs in the built environment through the
analysis of specific fire scenarios or through the quantification of risk for a group of fire
scenarios.
Typical objectives of FSE are:
a) to protect life safety,
b) to protect property,
c) to maintain the continuity of operations,
d) to protect the natural environment, and
e) to preserve heritage.
The analysis of FSE is usually based on calculations that use input data obtained principally
from quantitative fire tests as described in IEC 60695-1-11.
Fire safety engineering (FSE) is a discipline increasingly being used in support of performance-
based national fire safety regulations in many states and regional jurisdictions throughout the
world. ISO 23932-1 [1] , developed by ISO TC 92/SC 4, outlines the fundamental
methodologies and uses of FSE. Further detailed aspects of FSE are covered in ISO 16730-1
[2], ISO 16732-1 [3], ISO 16733-1 [4], ISO 24678-2 [5], ISO 24678-3 [6], ISO 24678-4 [7] and
ISO/TR 16738 [8].
In addition to performance-based regulations, many nations are also using FSE to supplement
prescriptive regulations by applying FSE principles to specific design aspects, where reduced
costs, alternative practices, improved performance and improved safety are the objectives.
The International Maritime Organization (IMO) is using FSE and the ISO standards mentioned
above to develop fire safety designs for ships as described in IMO MSC/Circ.1002[27]. These
are considered to bring an improvement in the design of electrotechnical products.
There are handbooks, guides and literatures which give information with regards to FSE. See
Bibliography [28], [29], [30], [31], [32], [33], [34], [35], [36], [37], [38].
Qualitative and quantitative fire tests
Many standardized qualitative fire test methods give information on the performance of a
material or end product as measured in the test. Such information usually is not related to a
real fire scenario or real installation practices. These qualitative fire test methods result in a
"pass" or "fail" and/or a product or material ranking. They play an important role in prescriptive
regulations, and the results of a qualitative test can be used indirectly in fire hazard assessment
of electrotechnical products, but they are not suitable for directly supporting performance-based
design.
Most standardized test methods developed by IEC TC 89 for electrotechnical products are of
the qualitative type. It is agreed within ISO TC 92 and IEC TC 89 that this type of fire test will
continue to be maintained and, where necessary, developed. It is recognized that, even if the
use of these standards is in prescriptive codes, product data from many of these standards can
be potentially adaptable for fire safety engineering purposes.
___________
Numbers in square brackets refer to the Bibliography.
IEC 60695-1-12:2026 © IEC 2026
In contrast, quantitative fire tests are increasingly being developed and used, and these provide
data that can be inputs to fire safety engineering calculations.
Various ISO standards [14] to [23] for quantitative fire tests have been developed by
ISO TC 92/SC 1, Fire safety - Initiation and growth of fire, some of which can be used to assess
the performance of electrotechnical products, and referred to in the series of IEC 60695, e.g.
IEC TS 60695-5-2 [9], IEC 60695-6-2 [10], IEC 60695-7-2 [11], IEC 60695-8-2 [12] and
IEC 60695-9-2 [13].
IEC 60695-1-12:2026 © IEC 2026
1 Scope
This part of IEC 60695 specifies methodologies of fire safety engineering for electrotechnical
products by providing:
– an explanation of the principles and uses of fire safety engineering;
– guidance on the use of fire safety engineering in the design of electrotechnical products;
– fire safety engineering terminology, and concepts;
– an indication of properties, data and tests needed for input into fire safety engineering
assessment; and
– informative references.
This document is intended to provide guidance for product committees on fire safety
engineering methods and performance-based tests for use in performance-based designs and
fire hazard assessments of electrotechnical materials, assemblies, products and systems. More
detailed information on fire safety engineering is contained in ISO 23932-1 [1].
NOTE Further detailed aspects of FSE are covered in ISO 16730-1 [2], ISO 16732-1 [3], ISO 16733-1 [4],
ISO 24678-2 [5], ISO 24678-3 [6], ISO 24678-4 [7] and ISO/TR 16738 [8].
This basic safety publication focusing on safety guidance is primarily intended for use by
committees in the preparation of safety publications in accordance with the principles laid down
in IEC Guide 104 [39] and ISO/IEC Guide 51 [40]
One of the responsibilities of a committee is, wherever applicable, to make use of basic safety
publications in the preparation of its publications.
This document has the status of a horizontal publication in accordance with IEC Guide 108 [43].
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies.
For undated references, the latest edition of the referenced document (including any
amendments) applies.
IEC 60695-1-10:2016, Fire hazard testing - Part 1-10: Guidance for assessing the fire hazard
of electrotechnical products - General guidelines
IEC 60695-1-11, Fire hazard testing - Part 1-11: Guidance for assessing the fire hazard of
electrotechnical products - Fire hazard assessment
IEC 60695-4:2021, Fire hazard testing - Part 4: Terminology concerning fire tests for
electrotechnical products
ISO 13943:2017, Fire safety - Vocabulary
3 Terms and definitions
For the purposes of this document, the terms and definitions given in IEC 60695-4:2021 and
ISO 13943:2017 apply.
IEC 60695-1-12:2026 © IEC 2026
ISO and IEC maintain terminological databases for use in standardization at the following
addresses:
– IEC Electropedia: available at http://www.electropedia.org/
– ISO Online browsing platform: available at http://www.iso.org/obp
4 The fire safety engineering process
4.1 General
Fire safety engineering has been and is continuing to be developed to enable the design,
implementation and maintenance of objects and structures in the built environment, using
scientific principles, so that defined fire safety engineering objectives can be met. In order to
do this, quantitative fire tests are used to provide input data for the necessary calculations.
When applied to a major project in the built environment, the fire engineering process is both
complex and comprehensive. A flow chart in Figure 1 illustrates an example of the fire safety
engineering process.
The process will encompass many different issues, for example: architectural design, structural
design, ventilation, plumbing and electrical infrastructure. The fire safety of electrotechnical
products is therefore only one aspect of a much larger process.
Fire safety engineering should be used when safety objectives cannot adequately be met by
prescriptive requirements, and can also be used in parallel with prescriptive requirements e.g.
to support, from a scientific point of view, that such requirements are valid, or to further improve
the fire safety of the product.
IEC 60695-1-12:2026 © IEC 2026

Figure 1 – FSE process – Design, implementation and management
(ISO 23932-1:2018 [1], Figure 1)
4.2 Fire safety engineering calculations
These calculations can range from the solution of simple equations to very complex computer
models. For example, they could be used to calculate pipe sizes for sprinkler systems, or they
could be used to calculate the structural response of a load bearing building element, such as
a beam or a column, from a knowledge of the material properties at elevated temperatures, the
predicted temperatures reached in the fire and the applied loads.
At another level, requiring the use of integrated computer programs, these can be applied to
the evaluation of the life safety consequences of a specified fire, which would involve definition
of the context, the product designs, the structures, the scenarios, and then calculation of the
resulting hazards.
An electrotechnical example would be to assess the risks associated with cable fires in the built
environment using quantified data of fire growth, flame spread, smoke and toxic gas generation
of electric cables as well as the prediction of people movement.
IEC 60695-1-12:2026 © IEC 2026
NOTE A study at Lund University [28] simulated the escape phase in an occupied furnished building considering
two different cable installations but with various fire scenarios and means of evacuation. Cables with widely differing
material properties were chosen, not necessarily representing installed cables. The study aimed at illustrating the
power of modelling tools (simulation and FSE approach) rather than a practical selection study.
At a more strategic level, fire safety engineering can be applied by using a package of tests
and measures to a variety of different fire scenarios. Computer fire models have been
developed with four-dimensional animations (time and space) simulating multiple fire dynamics
over a range of fire scenarios, and structure responses (see an example in Bibliography [29]).
4.3 Validity of methods
The fire safety engineering process should be based on sound fire science and engineering
practice incorporating widely accepted methods, empirical data, calculations, correlation, and
computer models as contained in engineering textbooks and technical literature. There are
numerous technical resources that are of use in a particular fire safety design. Therefore, it is
very important that fire safety engineers and other members of the design team determine the
acceptability of the sources and methodologies used for the applications in which they are used.
When determining the validity of a resource, it is helpful to know the process through which the
resource was developed, reviewed, and validated. For example, many fire safety codes and
standards are developed under an open consensus process conducted by recognized
professional societies, code-making organizations, or governmental bodies. Other technical
references are subject to a peer review process, such as many of the technical and engineering
journals available. Also, engineering handbooks and textbooks provide wide
...