EN 61754-9:2001

SLOVENSKI STANDARD
01-januar-2004
[Not translated]
Fibre optic connector interfaces - Part 9: Type DS connector family
Steckgesichter von Lichtwellenleiter-Steckverbindern - Teil 9: Bauart DS
Steckverbinderfamilie
Interface de connecteurs pour fibres optiques - Partie 9: Famille de connecteur de type
DS
Ta slovenski standard je istoveten z: EN 61754-9:2001
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 61754-9
NORME EUROPÉENNE
EUROPÄISCHE NORM December 2001
ICS 33.180.20
English version
Fibre optic connector interfaces
Part 9: Type DS connector family
(IEC 61754-9:1996, modified)
Interface de connecteurs pour Steckgesichter von Lichtwellenleiter-
fibres optiques Steckverbindern
Partie 9: Famille de connecteur Teil 2: Bauart DS Steckverbinderfamilie
de type DS (IEC 61754-9:1996, modifiziert)
(CEI 61754-9:1996, modifiée)
This European Standard was approved by CENELEC on 1997-03-11. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands,
Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2001 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61754-9:2001 E
Foreword
The text of document 86B/837/FDIS, future edition 1 of IEC 61754-9, prepared by SC 86B, Fibre optic
interconnecting devices and passive components, of IEC TC 86, Fibre optics, was submitted to the
IEC-CENELEC parallel vote and was approved by CENELEC as EN 61754-9 on 1997-03-11 with a
corrigendum to the text of the International Standard.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2002-07-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2002-07-01
__________
Endorsement notice
The text of the International Standard IEC 61754-9:1996 was approved by CENELEC as a European
Standard with the following corrigendum to IEC 61754-9:
Table 2d Replace "Surface roughness grade N4 (0,2 µm radius)" by "Surface roughness
R = 0,2 µm)".
z
__________
INTERNATIONAL
IEC
STANDARD
1754-9
First edition
1996-12
Fibre optic connector interfaces –
Part 9:
Type DS connector family
Interfaces de connecteurs
pour fibres optiques –
Partie 9:
Famille de connecteurs de type DS
 CEI 1996  Droits de reproduction réservés  Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized
utilisée sous quelque forme que ce soit et par aucun procédé, in any form or by any means, electronic or mechanical,
électronique ou mécanique, y compris la photocopie et les including photocopying and microfilm, without permission
microfilms, sans l'accord écrit de l'éditeur. in writing from the publisher
Bureau central de la Commission Electrotechnique Internationale 3, rue de Varembé Genève Suisse
CODE PRIX
Commission Electrotechnique Internationale
PRICE CODE J
International Electrotechnical Commission
Pour prix, voir catalogue en vigueur
For price, see current catalogue

– 2 – 1754-9 © IEC:1996 (E)
CONTENTS
Page
FOREWORD . 3
Clause
1  Scope . 4
2  Description . 4
3  Interfaces. 4

1754-9  IEC:1996 (E) – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
_________
FIBRE OPTIC CONNECTOR INTERFACES –
Part 9: Type DS connector family
FOREWORD
1) The IEC (International Electrotechnical Commission) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of the IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, the IEC publishes International Standards. Their preparation is
entrusted to technical committees; any IEC National Committee interested in the subject dealt with may
participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. The IEC collaborates closely with the International Organization
for Standardization (ISO) in accordance with conditions determined by agr
...