EN 61968-11:2010

SLOVENSKI STANDARD
01-november-2010
,QWHJUDFLMDYUVWXSRUDEHSULHOHNWURSRGMHWMLK6LVWHPVNLYPHVQLNL]DXSUDYOMDQMH
GLVWULEXFLMHGHO3ULNOMXþNL]DGLVWULEXFLMRYVNXSQHPLQIRUPDFLMVNHPPRGHOX
,(&
Application integration at electric utilities - System interfaces for distribution management
- Part 11: Common information model (CIM) extensions for distribution (IEC 61968-
11:2010)
Integration von Anwendungen in Anlagen der Elektrizitätsversorgung -
Systemschnittstellen für Netzführung - Teil 11: Erweiterungen des allgemeinen
Informationsmodells (CIM) für die Verteilung (IEC 61968-11:2010)
Intégration d'applications pour les compagnies d'électricité – Interfaces système pour la
gestion de la distribution - Partie 11 : Extensions du modèle commun d’information (CIM)
pour la distribution (CEI 61968-11:2010)
Ta slovenski standard je istoveten z: EN 61968-11:2010
ICS:
29.240.30 Krmilna oprema za Control equipment for electric
elektroenergetske sisteme power systems
35.200 Vmesniška in povezovalna Interface and interconnection
oprema equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 61968-11
NORME EUROPÉENNE
September 2010
EUROPÄISCHE NORM
ICS 33.200
English version
Application integration at electric utilities -
System interfaces for distribution management -
Part 11: Common information model (CIM) extensions for distribution
(IEC 61968-11:2010)
Intégration d'applications pour  Integration von Anwendungen in Anlagen
les compagnies d'électricité – Interfaces der Elektrizitätsversorgung -
système pour la gestion de la distribution - Systemschnittstellen für Netzführung -
Partie 11 : Extensions du modèle commun Teil 11: Erweiterungen des allgemeinen
d’information (CIM) pour Informationsmodells (CIM)
la distribution für die Verteilung
(CEI 61968-11:2010) (IEC 61968-11:2010)

This European Standard was approved by CENELEC on 2010-09-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels

© 2010 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61968-11:2010 E
Foreword
The text of document 57/1058/FDIS, future edition 1 of IEC 61968-11, prepared by IEC TC 57, Power
systems management and associated information exchange, was submitted to the IEC-CENELEC
parallel vote and was approved by CENELEC as EN 61968-11 on 2010-09-01.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent
rights.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
(dop) 2011-06-01
national standard or by endorsement
– latest date by which the national standards conflicting
(dow) 2013-09-01
with the EN have to be withdrawn
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60968-11:2010 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 61968-3 NOTE  Harmonized as EN 61968-3.
IEC 61968-4 NOTE  Harmonized as EN 61968-4.
IEC 61968-9 NOTE  Harmonized as EN 61968-9
IEC 61968-13 NOTE  Harmonized as EN 61968-13
__________
- 3 - EN 61968-11:2010
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year

IEC 61968-1 - Application integration at electric utilities - EN 61968-1 -
System interfaces for distribution
management -
Part 1: Interface architecture and general
requirements
IEC/TS 61968-2 - Application integration at electric utilities - - -
System interfaces for distribution
management -
Part 2: Glossary
IEC 61970-301 - Energy management system application EN 61970-301 -
program interface (EMS-API) -
Part 301: Common information model (CIM)
base
IEC 61970-501 - Energy management system application EN 61970-501 -
program interface (EMS-API) -
Part 501: Common Information Model
Resource Description Framework (CIM RDF)
schema
IEC 61968-11 ®
Edition 1.0 2010-07
INTERNATIONAL
STANDARD
colour
inside
Application integration at electric utilities – System interfaces for distribution
management –
Part 11: Common information model (CIM) extensions for distribution

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
XH
ICS 33.200 ISBN 978-2-88912-021-5
– 2 – 61968-11 © IEC:2010(E)
CONTENTS
FOREWORD.10
INTRODUCTION.12
1 Scope.13
2 Normative references .14
3 Terms and definitions .14
4 CIM specification.15
4.1 CIM modeling notation.15
4.2 CIM packages .15
4.2.1 General .15
4.2.2 TC 57 CIM packages .16
4.2.3 CIM extensions for distribution packages (this document).16
4.3 CIM UML modelling .17
4.3.1 General .17
4.3.2 Scope of UML model .18
4.3.3 Extensibility .18
4.3.4 Message (profile) definition .19
4.4 DCIM model concepts and examples.19
4.4.1 General .19
4.4.2 Key classes in DCIM.19
4.4.3 Single-phase and unbalanced loads .20
4.4.4 Distribution line segments .21
4.4.5 Distribution transformers .26
4.4.6 Connectivity with unbalanced phases .30
4.4.7 Electrical model vs. physical model .32
4.4.8 Locations and graphical representations.33
4.4.9 Metering .33
4.4.10 PaymentMetering .35
4.5 Other.39
5 Detailed model .39
5.1 Overview .39
5.2 Context .39
6 Package architecture (normative) .41
6.1 General .41
6.2 Top package IEC61968 .41
6.2.1 IEC61968CIMVersion .43
6.2.2 Package Common .44
6.2.3 Package WiresExt .56
6.2.4 Package Assets.69
6.2.5 Package AssetModels .75
6.2.6 Package Work .94
6.2.7 Package Customers .96
6.2.8 Package Metering.105
6.2.9 Package LoadControl .129
6.2.10 Package PaymentMetering .132
Bibliography.162

61968-11 © IEC:2010(E) – 3 –
Figure 1 – TC 57 CIM packages.16
Figure 2 – CIM extensions for distribution (DCIM) top-level packages.17
Figure 3 – DCIM key classes .20
Figure 4 – DCIM load model .21
Figure 5 – DCIM line connectivity model .22
Figure 6 – DCIM conductor (line and cable datasheet) model .23
Figure 7 – DCIM transformer connectivity model.26
Figure 8 – DCIM transformer datasheet model .27
Figure 9 – DCIM tap changer model.29
Figure 10 – Example of a distribution transformer that can be modelled with DCIM.30
Figure 11 – DCIM connectivity for two-Terminal devices .31
Figure 12 – DCIM connectivity for single-Terminal devices .32
Figure 13 – DCIM assets and relation to power system resources.33
Figure 14 – DCIM power system resource and asset locations.33
Figure 15 – DCIM metering model.34
Figure 16 – DCIM transacting model .35
Figure 17 – DCIM receipting model.36
Figure 18 – DCIM auxiliary agreement model.37
Figure 19 – DCIM pricing structure model .38
Figure 20 – Package diagram IEC61968::Main .41
Figure 21 – Package diagram IEC61968::Dependencies .42
Figure 22 – Package diagram IEC61968::StdCIM .43
Figure 23 – Logical diagram IEC61968::DCIMKeyClasses .43
Figure 24 – Logical diagram Common::CommonInheritance.44
Figure 25 – Logical diagram Common::CommonOverview.45
Figure 26 – Logical diagram Common::DCIMLocations .45
Figure 27 – Logical diagram WiresExt::WiresExtInheritance.56
Figure 28 – Logical diagram WiresExt::DCIMLoadModel .57
Figure 29 – Logical diagram WiresExt::DCIMLineModel .58
Figure 30 – Logical diagram WiresExt::DCIMTransformerModel.59
Figure 31 – Logical diagram WiresExt::DCIMTapChangerModel.60
Figure 32 – Logical diagram Assets::AssetsInheritance .69
Figure 33 – Logical diagram Assets::AssetsOverview .70
Figure 34 – Logical diagram Assets::DCIMAssetsAndPSRs .70
Figure 35 – Logical diagram AssetModels::AssetModelsInheritance.76
Figure 36 – Logical diagram AssetModels::AssetModelsOverview.77
Figure 37 – Logical diagram AssetModels::DCIMConductorInfo .78
Figure 38 – Logical diagram AssetModels::DCIMTransformerInfo .79
Figure 39 – Logical diagram Work::WorkInheritance .94
Figure 40 – Logical diagram Work::WorkOverview .94
Figure 41 – Logical diagram Customers::CustomersInheritance .96
Figure 42 – Logical diagram Customers::CustomersOverview.97
Figure 43 – Logical diagram Metering::MeteringInheritance .106

– 4 – 61968-11 © IEC:2010(E)
Figure 44 – Logical diagram Metering::MeteringOverviewShort.107
Figure 45 – Logical diagram Metering::MeteringOverview .108
Figure 46 – Logical diagram Metering::MeteringRelationships.109
Figure 47 – Logical diagram LoadControl::LoadControlInheritance .129
Figure 48 – Logical diagram LoadControl::LoadControlOverview .130
Figure 49 – Logical diagram PaymentMetering::PaymentMeteringInheritance .133
Figure 50 – Logical diagram PaymentMetering::PaymentMeteringOverview .134
Figure 51 – Logical diagram PaymentMetering::PaymentMeteringRelationships .135
Figure 52 – Logical diagram PaymentMetering::Transacting .136
Figure 53 – Logical diagram PaymentMetering::Receipting .137
Figure 54 – Logical diagram PaymentMetering::AuxiliaryAgreement .138
Figure 55 – Logical diagram PaymentMetering::TariffProfile .139

Table 1 – Open wye/open delta transformer bank connections.30
Table 2 – Attribute documentation .40
Table 3 – Association ends documentation .40
Table 4 – Enums documentation .40
Table 5 – Attributes of IEC61968::IEC61968CIMVersion.44
Table 6 – Attributes of Common::DateTimeInterval .46
Table 7 – Attributes of Common::Status.46
Table 8 – Attributes of Common::PostalAddress .46
Table 9 – Attributes of Common::StreetAddress.47
Table 10 – Attributes of Common::StreetDetail .47
Table 11 – Attributes of Common::TownDetail .47
Table 12 – Attributes of Common::ElectronicAddress.48
Table 13 – Attributes of Common::TelephoneNumber .48
Table 14 – Attributes of Common::ActivityRecord .48
Table 15 – Association ends of Common::ActivityRecord with other classes .49
Table 16 – Attributes of Common::Agreement .49
Table 17 – Association ends of Common::Agreement with other classes.50
Table 18 – Attributes of Common::CoordinateSystem .50
Table 19 – Association ends of Common::CoordinateSystem with other classes .50
Table 20 – Attributes of Common::Document .50
Table 21 – Association ends of Common::Document with other classes.51
Table 22 – Attributes of Common::Location.51
Table 23 – Association ends of Common::Location with other classes .52
Table 24 – Attributes of Common::Organisation .52
Table 25 – Attributes of Common::PositionPoint .53
Table 26 – Association ends of Common::PositionPoint with other classes .53
Table 27 – Attributes of Common::TimePoint .53
Table 28 – Association ends of Common::TimePoint with other classes .54
Table 29 – Attributes of Common::TimeSchedule.54

61968-11 © IEC:2010(E) – 5 –
Table 30 – Association ends of Common::TimeSchedule with other classes .55
Table 31 – Attributes of Common::UserAttribute .55
Table 32 – Association ends of Common::UserAttribute with other classes .56
Table 33 – Attributes of WiresExt::DistributionLineSegment.61
Table 34 – Association ends of WiresExt::DistributionLineSegment with other classes.61
Table 35 – Attributes of WiresExt::DistributionTapChanger .62
Table 36 – Association ends of WiresExt::DistributionTapChanger with other classes.63
Table 37 – Attributes of WiresExt::DistributionTransformer .63
Table 38 – Association ends of WiresExt::DistributionTransformer with other classes .64
Table 39 – Attributes of WiresExt::DistributionTransformerWinding.65
Table 40 – Association ends of WiresExt::DistributionTransformerWinding with other
classes .65
Table 41 – Attributes of WiresExt::PerLengthPhaseImpedance .66
Table 42 – Association ends of WiresExt::PerLengthPhaseImpedance with other
classes .66
Table 43 – Attributes of WiresExt::PerLengthSequenceImpedance .66
Table 44 – Association ends of WiresExt::PerLengthSequenceImpedance with other
classes .67
Table 45 – Attributes of WiresExt::PhaseImpedanceData.67
Table 46 – Association ends of WiresExt::PhaseImpedanceData with other classes .67
Table 47 – Attributes of WiresExt::TransformerBank .68
Table 48 – Association ends of WiresExt::TransformerBank with other classes.68
Table 49 – Attributes of WiresExt::WindingPiImpedance .68
Table 50 – Association ends of WiresExt::WindingPiImpedance with other classes.69
Table 51 – Attributes of Assets::AcceptanceTest .70
Table 52 – Literals of Assets::SealConditionKind .71
Table 53 – Literals of Assets::SealKind.71
Table 54 – Attributes of Assets::Asset .71
Table 55 – Association ends of Assets::Asset with other classes .72
Table 56 – Attributes of Assets::AssetContainer .73
Table 57 – Association ends of Assets::AssetContainer with other classes .73
Table 58 – Attributes of Assets::AssetFunction .74
Table 59 – Attributes of Assets::ComMediaAsset .74
Table 60 – Association ends of Assets::ComMediaAsset with other classes.75
Table 61 – Attributes of Assets::Seal .75
Table 62 – Association ends of Assets::Seal with other classes .75
Table 63 – Literals of AssetModels::AssetModelUsageKind .79
Table 64 – Literals of AssetModels::CorporateStandardKind.80
Table 65 – Literals of AssetModels::CableConstructionKind.80
Table 66 – Literals of AssetModels::CableOuterJacketKind.80
Table 67 – Literals of AssetModels::CableShieldMaterialKind .81
Table 68 – Literals of AssetModels::ConductorInsulationKind .81
Table 69 – Literals of AssetModels::ConductorMaterialKind .82
Table 70 – Literals of AssetModels::ConductorUsageKind .82

– 6 – 61968-11 © IEC:2010(E)
Table 71 – Attributes of AssetModels::AssetModel.82
Table 72 – Attributes of AssetModels::CableInfo .83
Table 73 – Association ends of AssetModels::CableInfo with other classes.83
Table 74 – Attributes of AssetModels::ConcentricNeutralCableInfo .84
Table 75 – Association ends of AssetModels::ConcentricNeutralCableInfo with other
classes .84
Table 76 – Attributes of AssetModels::ConductorInfo .85
Table 77 – Association ends of AssetModels::ConductorInfo with other classes.85
Table 78 – Attributes of AssetModels::DistributionWindingTest .85
Table 79 – Association ends of AssetModels::DistributionWindingTest with other
classes .86
Table 80 – Attributes of AssetModels::EndDeviceModel.86
Table 81 – Association ends of AssetModels::EndDeviceModel with other classes .86
Table 82 – Attributes of AssetModels::OpenCircuitTest.87
Table 83 – Association ends of AssetModels::OpenCircuitTest with other classes .87
Table 84 – Attributes of AssetModels::OverheadConductorInfo.87
Table 85 – Association ends of AssetModels::OverheadConductorInfo with other
classes .88
Table 86 – Attributes of AssetModels::ShortCircuitTest.88
Table 87 – Association ends of AssetModels::ShortCircuitTest with other classes .89
Table 88 – Attributes of AssetModels::TapeShieldCableInfo .89
Table 89 – Association ends of AssetModels::TapeShieldCableInfo with other classes .90
Table 90 – Attributes of AssetModels::ToWindingSpec .90
Table 91 – Association ends of AssetModels::ToWindingSpec with other classes .90
Table 92 – Attributes of AssetModels::TransformerInfo .91
Table 93 – Association ends of AssetModels::TransformerInfo with other classes.91
Table 94 – Attributes of AssetModels::WindingInfo .91
Table 95 – Association ends of AssetModels::WindingInfo with other classes .92
Table 96 – Attributes of AssetModels::WireArrangement.92
Table 97 – Association ends of AssetModels::WireArrangement with other classes .93
Table 98 – Attributes of AssetModels::WireType .93
Table 99 – Association ends of AssetModels::WireType with other classes.94
Table 100 – Literals of Work::WorkKind .95
Table 101 – Attributes of Work::Work.95
Table 102 – Association ends of Work::Work with other classes .96
Table 103 – Literals of Customers::CustomerKind.97
Table 104 – Literals of Customers::RevenueKind.98
Table 105 – Literals of Customers::ServiceKind .98
Table 106 – Attributes of Customers::Customer .98
Table 107 – Association ends of Customers::Customer with other classes.99
Table 108 – Attributes of Customers::CustomerAccount.99
Table 109 – Association ends of Customers::CustomerAccount with other classes .100
Table 110 – Attributes of Customers::CustomerAgreement . 100
Table 111 – Association ends of Customers::CustomerAgreement with other classes .101

61968-11 © IEC:2010(E) – 7 –
Table 112 – Attributes of Customers::PricingStructure . 101
Table 113 – Association ends of Customers::PricingStructure with other classes.102
Table 114 – Attributes of Customers::ServiceCategory .103
Table 115 – Association ends of Customers::ServiceCategory with other classes .103
Table 116 – Attributes of Customers::ServiceLocation . 103
Table 117 – Association ends of Customers::ServiceLocation with other classes . 104
Table 118 – Attributes of Customers::Tariff.105
Table 119 – Association ends of Customers::Tariff with other classes. 105
Table 120 – Literals of Metering::DemandKind.110
Table 121 – Attributes of Metering::DynamicDemand. 110
Table 122 – Literals of Metering::ReadingKind.110
Table 123 – Attributes of Metering::ComFunction.111
Table 124 – Association ends of Metering::ComFunction with other classes . 111
Table 125 – Attributes of Metering::DemandResponseProgram. 112
Table 126 – Association ends of Metering::DemandResponseProgram with other
classes .112
Table 127 – Attributes of Metering::DeviceFunction .112
Table 128 – Association ends of Metering::DeviceFunction with other classes .113
Table 129 – Attributes of Metering::ElectricMeteringFunction. 113
Table 130 – Association ends of Metering::ElectricMeteringFunction with other classes . 114
Table 131 – Attributes of Metering::EndDeviceAsset. 114
Table 132 – Association ends of Metering::EndDeviceAsset with other classes .116
Table 133 – Attributes of Metering::EndDeviceControl . 117
Table 134 – Association ends of Metering::EndDeviceControl with other classes .117
Table 135 – Attributes of Metering::EndDeviceEvent. 117
Table 136 – Association ends of Metering::EndDeviceEvent with other classes . 118
Table 137 – Attributes of Metering::EndDeviceGroup .118
Table 138 – Association ends of Metering::EndDeviceGroup with other classes. 118
Table 139 – Association ends of Metering::IntervalBlock with other classes. 119
Table 140 – Attributes of Metering::IntervalReading.119
Table 141 – Association ends of Metering::IntervalReading with other classes .120
Table 142 – Attributes of Metering::MeterAsset.120
Table 143 – Association ends of Metering::MeterAsset with other classes . 121
Table 144 – Attributes of Metering::MeterReading .122
Table 145 – Association ends of Metering::MeterReading with other classes . 122
Table 146 – Attributes of Metering::MeterServiceWork. 122
Table 147 – Association ends of Metering::MeterServiceWork with other classes . 123
Table 148 – Attributes of Metering::Pending .123
Table 149 – Association ends of Metering::Pending with other classes . 124
Table 150 – Attributes of Metering::Reading .124
Table 151 – Association ends of Metering::Reading with other classes . 124
Table 152 – Attributes of Metering::ReadingQuality .125
Table 153 – Association ends of Metering::ReadingQuality with other classes . 125

– 8 – 61968-11 © IEC:2010(E)
Table 154 – Attributes of Metering::ReadingType.125
Table 155 – Association ends of Metering::ReadingType with other classes . 126
Table 156 – Attributes of Metering::Register .126
Table 157 – Association ends of Metering::Register with other classes . 127
Table 158 – Attributes of Metering::SDPLocation .127
Table 159 – Association ends of Metering::SDPLocation with other classes. 128
Table 160 – Attributes of Metering::ServiceDeliveryPoint .128
Table 161 – Association ends of Metering::ServiceDeliveryPoint with other classes.129
Table 162 – Attributes of LoadControl::RemoteConnectDisconnectInfo . 130
Table 163 – Attributes of LoadControl::ConnectDisconnectFunction . 131
Table 164 – Association ends of LoadControl::ConnectDisconnectFunction with other
classes .132
Table 165 – Attributes of PaymentMetering::AccountMovement . 139
Table 166 – Attributes of PaymentMetering::AccountingUnit . 140
Table 167 – Attributes of PaymentMetering::BankAccountDetail . 140
Table 168 – Attributes of PaymentMetering::Due . 140
Table 169 – Attributes of PaymentMetering::LineDetail . 141
Table 170 – Literals of PaymentMetering::ChargeKind.141
Table 171 – Literals of PaymentMetering::ChequeKind .142
Table 172 – Literals of PaymentMetering::CreditKind. 142
Table 173 – Literals of PaymentMetering::SupplierKind . 142
Table 174 – Literals of PaymentMetering::TenderKind .142
Table 175 – Literals of PaymentMetering::TransactionKind . 143
Table 176 – Attributes of PaymentMetering::AuxiliaryAccount. 143
Table 177 – Association ends of PaymentMetering::AuxiliaryAccount with other classes. 144
Table 178 – Attributes of PaymentMetering::AuxiliaryAgreement . 144
Table 179 – Association ends of PaymentMetering::AuxiliaryAgreement with other
classes .146
Table 180 – Attributes of PaymentMetering::Card . 146
Table 181 – Association ends of PaymentMetering::Card with other classes. 146
Table 182 – Attributes of PaymentMetering::Cashier. 147
Table 183 – Association ends of PaymentMetering::Cashier with other classes . 147
Table 184 – Attributes of PaymentMetering::CashierShift.147
Table 185 – Association ends of PaymentMetering::CashierShift with other classes . 148
Table 186 – Attributes of PaymentMetering::Charge . 148
Table 187 – Association ends of PaymentMetering::Charge with other classes . 148
Table 188 – Attributes of PaymentMetering::Cheque. 149
Table 189 – Association ends of PaymentMetering::Cheque with other classes . 149
Table 190 – Attributes of PaymentMetering::ConsumptionTariffInterval. 149
Table 191 – Association ends of PaymentMetering::ConsumptionTariffInterval with
other classes .150
Table 192 – Attributes of PaymentMetering::MerchantAccount. 150
Table 193 – Association ends of PaymentMetering::MerchantAccount with other
classes .151

61968-11 © IEC:2010(E) – 9 –
Table 194 – Attributes of PaymentMetering::MerchantAgreement . 151
Table 195 – Association ends of PaymentMetering::MerchantAgreement with other
classes .152
Table 196 – Attributes of PaymentMetering::PointOfSale . 152
Table 197 – Association ends of PaymentMetering::PointOfSale with other classes. 152
Table 198 – Attributes of PaymentMetering::Receipt. 153
Table 199 – Association ends of PaymentMetering::Receipt with other classes .153
Table 200 – Attributes of PaymentMetering::ServiceSupplier . 153
Table 201 – Association ends of PaymentMetering::ServiceSupplier with other classes .154
Table 202 – Attributes of PaymentMetering::Shift . 155
Table 203 – Attributes of PaymentMetering::TariffProfile . 156
Table 204 – Association ends of PaymentMetering::TariffProfile with other classes . 156
Table 205 – Attributes of PaymentMetering::Tender. 157
Table 206 – Association ends of PaymentMetering::Tender with other classes . 157
Table 207 – Attributes of PaymentMetering::TimeTariffInterval .157
Table 208 – Association ends of PaymentMetering::TimeTariffInterval with other
classes .158
Table 209 – Attributes of PaymentMetering::Transaction . 158
Table 210 – Association ends of PaymentMetering::Transaction with other classes .159
Table 211 – Attributes of PaymentMetering::Transactor . 159
Table 212 – Association ends of PaymentMetering::Transactor with other classes.160
Table 213 – Attributes of PaymentMetering::Vendor .160
Table 214 – Association ends of PaymentMetering::Vendor with other classes . 160
Table 215 – Attributes of PaymentMetering::VendorShift .161
Table 216 – Association ends of PaymentMetering::VendorShift with other classes . 161

– 10 – 61968-11 © IEC:2010(E)
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
APPLICATION INTEGRATION AT ELECTRIC UTILITIES –
SYSTEM INTERFACES FOR DISTRIBUTION MANAGEMENT –

Part 11: Common information model (CIM) extensions for distribution

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
...