EN 60745-2-2:2003/A11:2007

SLOVENSKI STANDARD
01-maj-2007
5RþQDHOHNWULþQDRURGMD9DUQRVWGHO3RVHEQH]DKWHYH]DYLMDþQLNHLQ
XGDUQHYLMDþQLNH
Hand-held motor-operated electric tools - Safety -- Part 2-2: Particular requirements for
screwdrivers and impact wrenches
Handgeführte motorbetriebene Elektrowerkzeuge - Sicherheit - Teil 2-2: Besondere
Anforderungen für Schrauber und Schlagschrauber
Outils électroportatifs a moteur - Sécurité - Partie 2-2: Regles particulieres pour les
visseuses et les clés a chocs
Ta slovenski standard je istoveten z: EN 60745-2-2:2003/A11:2007
ICS:
25.140.20 (OHNWULþQDRURGMD Electric tools
25.140.30 2URGMD]DURþQRXSRUDER Hand-operated tools
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 60745-2-2/A11
NORME EUROPÉENNE
March 2007
EUROPÄISCHE NORM
ICS 25.140.20; 25.140.30
English version
Hand-held motor-operated electric tools -
Safety -
Part 2-2: Particular requirements
for screwdrivers and impact wrenches

Outils électroportatifs à moteur -  Handgeführte motorbetriebene
Sécurité - Elektrowerkzeuge -
Partie 2-2: Règles particulières Sicherheit -
pour les visseuses et les clés à chocs Teil 2-2: Besondere Anforderungen
für Schrauber und Schlagschrauber

This amendment A11 modifies the European Standard EN 60745-2-2:2003; it was approved by CENELEC on
2006-12-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels

© 2007 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60745-2-2:2003/A11:2007 E

Foreword
This amendment to the European Standard EN 60745-2-2:2003 was prepared by the Technical
Committee CENELEC TC 61F, Safety of hand-held and transportable motor-operated electric tools.
The text of the draft was submitted to the Unique Acceptance Procedure and was approved by
CENELEC as amendment A11 to EN 60745-2-2:2003 on 2006-12-01.
This amendment was prepared to align the Subclause 6.2 with the new Subclause 6.2 in
EN 60745-1:2006. Moreover, vibration values determined with the new 6.2 are complying with the
requirements of the Physical Agents Directive Vibration 2002/44/EC.
The following dates were fixed
– latest date by which the amendment has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2007-12-01
– latest date by which the national standards conflicting
with the amendment have to be withdrawn (dow) 2007-12-01

– 3 – EN 60745-2-2:2003/A11:2007
Foreword
th
Replace the 6 paragraph by the following:
This European Standard has been prepared under a mandate given to CENELEC by the European
Commission and the European Free Trade Association and covers essential requirements of
EC Directive 98/37/EC (Machinery Directive), amended by Directive 98/79/EC. See Annex ZZ.
th th
Replace the 10 and 11 paragraphs by the follow
...